1. Fast processor
Cpu is msm7627 aa and the system adopts android 4.0 ics operating system.
2. Strong protection for bad environment
It can apply to the bad environment, which can resist multiple dropping impact from 1.2m high; apply to ip65 protection grade with good water-proof and dust-proof effect; durable and long life span.
3. Visible 3.5 inch lcd in the sunlight
It is 3.5 inch vertical screen lcd, 480*640 high resolutions; with pressure sensitive touch screen and semi permeable tft lcd readable display. Its particular non glare and reflective technology make the work in the wild sunlight more easy and convenient.
4. The storage capacity is big and extensible
Tf card supports no less than 8g cards, which can basically satisfy regular information and data storage.
It adopts portable change design. There is no need to open the tester and you can remove the battery with the knob. The battery capacity is as high as 6000 mah.
5. Advanced battery installation design and strong endurance
Due to the lithium battery capacity of 6000 mah and low-power design, the duration will be more than 3 days under routine operation.
6. Multi-functional module integration
--the built-in fixed network test module can do adsl test, lan test and modem emulation.
--5 million pixels camera makes the image data collection convenient.
--support bluetooth, which is convenient provide data transmission between any compatible electronic equipment.
--built-in gps module can realize the position location.
--support 1d/2d red light/ laser bar codes scan.
7. Reliable process design
It adopts advanced manufacturing process which is reliable and convenient to assemble.
Function and usage
It can set with 5 different temperature spots to do heat sealing, select the optimal heat healing temperature, and can also set the same temperature to speed up the heat sealing.
Instrument structure:
The structure of the heat-sealing tester is composed of 4 parts: pneumatic drive system, heat-sealing equipment, temperature adjustment system and time adjustment system.
Pneumatic drive system:
It includes pressure gauge, guide stick, cylinder, pneumatic valve, pressure regulating handle and so on. You can pull the pressure-regulating handle outward, rotate to the right side to adjust the heat sealing pressure to a high value, and rotate to the left side to reduce it. After setting the pressure, please press the handle to the side of mainframe to lock the air pressure.
Heating-seal device
It is composed of the upper and lower heat-sealing sticks, of which the upper one is connected with a cylinder. There is an insulating plate in the upper part, which can prevent heat transmit to the cylinder. The heat-sealing stick is made of aluminum, and the center is heater. There is a silica gel plate in the upper part of the lower heat-sealing stick, which can mitigate pressure impact during heat sealing. Temperature measurement system was installed at the back of the heat-sealing stick.
Temperature adjustment system:
The upper temperature controller controls the temperature of upper heat-sealing stick, and the rear temperature controller controls the temperature of lower heat-sealing stick. The temperature can be set at will through adjusting the button on the dial plate.
Time adjustment system:
Time adjustment system: The heat-sealing time can be set at will through adjusting the button on dial plate. The setting scope of time is 0.01s to 999.9h. Press the foot switch under the manual state, and the heat-sealing stick will be pressed together. Under the automatic state, the press-fitting time of upper and lower heat sealing sticks are controlled by a timer automatically, it can automatically recover later. The unit of timer is 0.1 second in general. There is time adjusting button on the panel of the timer, and the heat-sealing time can be adjusted at will.
Specifications
Power : AC220V 50HZ
Compressed air: 8kg/cm2
Heat sealing plane: 300mm10mm slick (With silicon pad in lower seal stick)
Heat sealing temperature: room temperature 20~300C (Precision 1C)
Heat sealing time: 0.01s~99.99h
Heat-sealing pressure: 0~0.8Mp.
Dimension: 700(L)mm400(W)mm540(H)mm
Weight: Desktop 30Kg.
ST3200 OTDR (Optical Time Domain Reflectometer) is an intelligent optical fiber communication tester. This tester is easy to use and portable, which has a 3.5-inch color LCD touching screen. It also possesses events intelligent analysis and more user---friendly operation.
It is an ideal test instrument for the fiber testing and troubleshooting. It can test the length of optical fiber and optical fiber cable attenuation coefficient. It can exactly display the loss distribution curve of the optical fiber and cable as well as the loss between two points and the joint loss. It also can test the distance between two points and the position of joint, fault point as well as breaking point. This tester has VFL (Vision Fault Locating) system. So it becomes convenient to test the fault location of jumper wire.
Main functions:
* Test the distance between two points and dynamically display the distance between two cursors
* Test the loss between two points and the loss constant of the optical fiber and cable
* Test the joint loss
* Auto-optimization and quick response
* Search for the event points automatically
* The function of wave form storage: it can store the wave form data and test condition into the disk and the stored information also can display again.
* Support the function of copy: it can copy the data file which is built in the internal disk into the U-disk directly.
Brief introduction:
St805 pon power meter is specially designed for pon network construction and maintenance which can be connected between olt nad ont. The voice, data, video signal online can be measured and displayed synchronously with this meter.
Key features
1. Test the three wavelength of the pon network synchronously: 1490nm, 1550nm, 1310nm
2. Can test the burst mode signal of 1310nm
3. Can set the threshold value, upload data, calibrate the wavelength through management software.
4. Can save 1000 records and upload the records to the management software
5. Supply 10 groups threshold values
6. En menu display
7. Auto shut off backlit
8. Real-time display
St230f tel line tester is a portable and intelligent line fault tester, which adopts advanced technologies such as intelligent cpu, ic & smt technology. It integrates various kinds of functions such as telephone and line performance test to be the one.
The incoming call number display function is compatible with fsk/dtmf two types. Its particular function of dc/ac voltage test can test whether there is dangerous dc/ac high voltage in the line or not quickly and accurately in order to protect lineman from high voltage.
The tester is designed following the human engineering theory with the appearance style like barbell, it can be put on the shoulder, the lineman can do other work using hands at the same time; besides, it can be hung in the tool belt of waist through the pothook, it is convenient to realize the talk function cooperate with the high quality earphone when the lineman is climbing or doing other things; the max working duration when the inside rechargeable ni-mh battery is fully charged is 7 hours; the shell is made of the new type of material and it resists water and shock.
Features:
1. Cid function, FSK/DTMF compatibility
2. Dtmf applying to GB/T15279-94
3. Dialing number display
4. Checking wire pairs function
5. Low voltage warning, automatic power off and energy-save design
6. Handsfree
7. Small size, simple operation.
Quantity no limited /case pack
Dimensions(mm): 232-73-95
Weight kg: 0.5.
276 Electronic Testers Suppliers
Short on time? Let Electronic Testers sellers contact you.
St332b tester is multi-functional hand-held adsl2+ test instrument with small size, specially designed for xdsl line test (xdsl include: adsl, adsl2, adsl2+ readsl etc) and maintenance it provides xdsl test, pppoe dial test, dmm test, modem emulation, line voltage indication and so on.
The tester adopts lcd display and menu operation which can display the test results directly and improve the xdsl broadband service greatly. Itf+s the best choice for the field operators of installation and maintenance.
Key features:
1) Test objects: adsl2+; adsl;adsl2;readsl
2) Multifunction: physical layer test; modem emulation ; pppoe dial ; dmm test; browse ip address information; determine telephone line faults (line break or mix)
3) Judge the quality of service
4) Data memory capacity: 50 records
5) LCD display
6) Menu operation
7) Simple, portable and money-saved.
8) Telephone functions, can detect incoming call, built-in earphone and microphone (optional).
Features:
With latest patented technology
Safe and time saving: non-contact phase sequence detection
Multipurpose: with live wire examination,simple power inspection, phase deficiency judgment, breakpoints finding and line maintenance
Dynamic LED display
Sensitive and reliable.
Specifications:
Voltages: 70 to 600V AC
Dimensions to be clamped: diameter 18mm.
Features:
Widely applied in ground resistance measurement, loop resistance measurement
With optional function of RS232 interface data upload
No need to disconnect the ground wire from the ground net
Without auxiliary electrode
High accuracy and resolution
With data memory
Automatic power off
Specifications:
Clamp size: 65 x 32mm
Resistance range: 0.01 to 1,200ohm;
With automatic shifting
Resistance resolution: 0.001ohm;
Data memory: 99 sets
Alarm setting: 1 to 199ohm; and buzzer alarm
Quick boot: in 0.5 second
With lower consumption.
1.Available for encoding, and for setup of the address for each DMX512 decoder module (SC-DMX-00xH/L) of own company;
2.Available for one-time setup of different addresses for the DMX512 control system consisted of by SC-DMX-00xH/L(DMX-512 decoder module) of own company;
3.Available for transmission single and multiple channel DMX512 signal;
4.Available for scene function, and for independent setup of DMX512 Start code and value of each channel;
5.Support transmission of DMX512 testing signal by 40Hz or 20Hz;
6.Available for receiving DMX512 signal and for separate display of 512 channels and their respective Start code.
A. Introduction:
This device applies to lighting equipment , low voltage electric appliance, household appliances, electric appliances , electric tools ,electronic instruments, electrical instruments , information technology research and production and quality department, also suitable for insulation materials , engineering plastic . electrical connectors, auxiliary parts industry.
B. Standards: IEC60112, GB/T 4207, UL746A .
C. Main parameters:
1. Testing chamber size :60cm*95cm*90cm (DxHxW) . 0.5M³.
2. Testing voltage : continuously adjustable during 100-600V, digital display.
3. Electrode :2 piece of platinum electrodes, 2mm*40mm*5mm (DxHxW). 30 inclined plane .
4. Distance between electrodes : 4.0mm.
5. Droplet equipment : interval time of droplet is adjustable
6. Pressure on surface :1.0
7. Max electricity : 3A
8. Outsize :61cm(D)x120cm(W)x105cm(H).
DTDL-8110 Cablefault Test Set is an integrated set of Cablefault Detection
and Location Devices. It is applicable for many types of power cable,
communication cable and optical cable. It can accurately measure the distance
of cablefault and locate the fault point.
The system includes:
1) DTDL-8110 Mainframe.
2) DTDL-8032R Receiver.
3) RF Inductive Tracking Rod.
4) Potential Difference Locating Rack with 2 pins.
5) AF Stethoscope and Headphones (for Listening mode).
6) Grounding Pin.
Parameters WEW-100
Accuracy 1% of indicated value
Measuring range of force(kN) 2-100kN
Subsection of force 1,2,5,10
Accuracy of deformation measurement 0.5%F.S
Clamping diameter for round specimen(mm) ;6-22
Clamping width of flat specimen(mm) 40
Clamping thickness of flat specimen(mm) 0-15
Testing space Tension 550
Compression 500
Platen size 100
Distance of bending by pass roll(mm) 30-400
Piston stroke(mm) 250
Power supply : 50Hz
Working environment Room temperature : relative humidity
Overall dimension(mm) Frame machine730x500x2000
Control System 1070x810x1730
Weight(Kg) 1370
Digital control hydraulic compression testing machine
1. Maximum Testing Load: 600kN
2. Measuring Range of Load: (24-600) kN
3. Accuracy of Testing Load: 1%
7. Distance between Upper and Lower Platen: 225mm (Adjustable)
8. Size of Upper Compression Platen: 180mm
9. Size of Lower Compression Platen: 250mm
10. Piston Ram Stroke: 150mm
11. Power Supply: three phase, 380/220V;50/60Hz
12. Working Environment: 80%
his series testing machine is suitable for tensile, compression, bending, shearing, peeling and tearing test of metal and nonmetal materials, such as rubber, plastic, electrical wire and cable, composite, profiled bar, bar metal, board, spring, components and so on. It confirms to ISO 75001ú¼ASTM A370, ASTM E4 ASTM E8 and JIS, DIN, BSEN testing standards.
AD800 in this machine is whole digit multi center closed loop measuring and control system. It adequately absorbs advanced functional characteristics and integrates the latest international professionally developed measuring and control system. Control software can automatically finger out routine data, such as tensile strength, yield strength, modulus of elasticity, extend rate after rupture, non-proportional extend strength RP0.2, etc. It can adopt many
kinds of controlling modes, such as constant force, constant displacement, constant deformation, and real time display many testing curves of force-displacement, force-time, stress-strain.
These curves automatically switch. Testing process control and data processing conform to the requirements of International standards. This machine is beautiful, multifunctional, safe and easy.
Parameters: WDW-1 WDW-2 WDW-5
Maximum force: 1KN 2KN 5KN
Accuracy: í_í+1% (0.5% as special order)
Measuring range of force (KN): 0.2%--100%FS
Resolution of force: 1/200000 of maximum force and no subsection of all scale
Accuracy of displacement measuring: í+0.5%
Resolution of displacement: 0.03ª¦m
Speed adjusting range of displacement: 0.001-500mm/min
Accuracy of deformation measuring: í+0.5%
Range of deformation measuring: 2%í½100%FS
Speed adjusting range of force; 0.005-5%F.S / S
Speed controlling accuracy of force: ¿Qí+2.0% of the set value (speedú+0.05%FS/S)
¿Qí+0.5%/í+1.0% of the set value ( speed¿R0.05%FS/S)
Speed adjusting range of deformation: 0.005-5%FS/S
Speed controlling accuracy of deformation:¿Qí+2.0% of the set value (speedú+0.05%FS/S)
¿Q í+0.5% of the set value ( speed¿R0.05%FS/S)
Valid tension testing space: 800
Compression testing space: 700
Clamping sample: Flat and round sample
Power supply: 380V/220ú¼50/60Hz
Working environment: Room temperature 10íµí½30íµ, relative humidityí_80%
Base configuration : Panasonic servo motor, precision photoelectric encoder
Weight(Kg): 300
2m measurement
Hdb3 and ami line codes
Out-of-service 2mb/s, n*64kb/s ber testing
In-service framed and unframed double-channel testing
Pcm simulator''mode testing
Frame data control and monitoring
Timeslot activity monitoring, fas, n-fas, ts16mfo analysis
Built-in 64kb/s tone channel listen capability
Cas and ccs signaling generation and monitoring
Round trip delay measurement
Aps delay measurement
Extensive error and alarm generation
Vf tone generation and measurement
Level measurement
Pulse mask measurement
Jitter measurements to itu-t standard o. 172
Frequency and offset measurement
Clock slip measurement
Up to +/-999ppm transmit clock deviation
Clock source: internal, interface or external 2m clock/signal
Real-time transmit circuit open/short indication
TLD1500 Series is high quality of Optical Fiber Checker. It contains the most advanced laser technology and microelectronics technology, and can be measured with various fiber optic adapter with 2.5mm common Interface. It is very convenient for them to check the single-mode and multimode fiber.
Product Features;
Six Impact Devices are available for special applications(D,DC,D+15,C,DL,G)
Direct display of hardness scales HRB,HRC,HV,HB,HS,HL;
Software to connect with PC and Dataview for PC operation;
Automatic identification Impact Devices and test direction (Except G);
Software data and upperlower limits setting and sound alarm;
Time and date setting; auto-clock;
On-Board memory holds 240-1000 groups of data;
Integral thermal printer, print all test results and histogram;
For all metallic materials;
Li Battery , low voltage indication and sound alarm;
LCD with blue back-light, showing all functions and parameters;
Wide measuring range;
Long standby time and stable performance of field work;
Technical specifications:
Hardness Scale:HL,HRC,HRB,HV,HB,HS
Accuracy:í+4HLD(760í+20HLD) repeatability of displayed value
Standard Impact Device:D
limits set measuring range:(170~960)HLDD Optional Impact
Devices:C DC D+15 DL G
Operating Temperaturee:0~40
Statistics Function:Average Max Min calculation,limits setting and alarm
Testing direction:Automatic
Min.thickness of hardened:0.8mm
Chargeing time:3~5hours
Power:Li Battery 4.2V/1600mAh
Charger:5V/500mA
Overall Dimensions:147*69*23mm
Weight:186g
Computer Interface:RS232
Min.Workpiece thickness:5mm (D DC DL D+15)1mm (C)10mm (G)
memory:240~1000 groups
Min.Workipece Weight:2~5Kg on stable support 0.05~2Kg with compact coupling
Min.Radius of Workpiece:Rmin=50mm(with support ring Rmin=10mm) Max.Workpiece
Hardnesss:996HV (D DC D+15 DL C) 646HB (G)
Continuous Working Time:About 200hours
276 Electronic Testers Suppliers
Short on time? Let Electronic Testers sellers contact you.
