Compression Testing Machine

1. Maximum Testing Load: 2000kN
2. Measuring Range of Load: (80-2000) kN
3. Accuracy of Testing Load: 1%
4. Rate of Loading Speed: 0.5N/s~10kN/s
5. Accuracy of Rate of Loading Speed: 5%
6. Accuracy of constant testing Loading: 1%
7. Distance between Upper and Lower Platen: 500mm (Adjustable)
8. Size of Upper Compression Platen: 230;280mm
9. Size of Lower Compression Platen: 230;280mm
10. Piston Ram Stroke: 200mm
11. Power Supply: three phase, 380/220V;50/60Hz
12.Working Environment: 80%


Overall dimension: Frame: 1115
Control System : 187;
Weight: Frame:4850kg, 200kg

1. Catching and holding the first peak value in test.
ng it on display for 0-30 sconds, then releasing the value and being ready for the next peak.
8. Power off time(0-99 minutes)can be set by yourself.
9. Connect it to pc by usb output, it will display the curve and table of testing result and analyze them, such as: print, statistical analysis, etc.
10. Option: mini-printer

his series testing machine is suitable for tensile, compression, bending, shearing, peeling and tearing test of metal and nonmetal materials, such as rubber, plastic, electrical wire and cable, composite, profiled bar, bar metal, board, spring, components and so on. It confirms to ISO 75001ú¼ASTM A370, ASTM E4 ASTM E8 and JIS, DIN, BSEN testing standards.
AD800 in this machine is whole digit multi center closed loop measuring and control system. It adequately absorbs advanced functional characteristics and integrates the latest international professionally developed measuring and control system. Control software can automatically finger out routine data, such as tensile strength, yield strength, modulus of elasticity, extend rate after rupture, non-proportional extend strength RP0.2, etc. It can adopt many
kinds of controlling modes, such as constant force, constant displacement, constant deformation, and real time display many testing curves of force-displacement, force-time, stress-strain.
These curves automatically switch. Testing process control and data processing conform to the requirements of International standards. This machine is beautiful, multifunctional, safe and easy.

Parameters: WDW-1 WDW-2 WDW-5
Maximum force: 1KN 2KN 5KN
Accuracy: í_í+1% (0.5% as special order)
Measuring range of force (KN): 0.2%--100%FS
Resolution of force: 1/200000 of maximum force and no subsection of all scale
Accuracy of displacement measuring: í+0.5%
Resolution of displacement: 0.03ª¦m
Speed adjusting range of displacement: 0.001-500mm/min
Accuracy of deformation measuring: í+0.5%
Range of deformation measuring: 2%í½100%FS
Speed adjusting range of force; 0.005-5%F.S / S
Speed controlling accuracy of force: ¿Qí+2.0% of the set value (speedú+0.05%FS/S)
¿Qí+0.5%/í+1.0% of the set value ( speed¿R0.05%FS/S)
Speed adjusting range of deformation: 0.005-5%FS/S
Speed controlling accuracy of deformation:¿Qí+2.0% of the set value (speedú+0.05%FS/S)
¿Q í+0.5% of the set value ( speed¿R0.05%FS/S)

Valid tension testing space: 800
Compression testing space: 700
Clamping sample: Flat and round sample
Power supply: 380V/220ú¼50/60Hz

Working environment: Room temperature 10íµí½30íµ, relative humidityí_80%
Base configuration : Panasonic servo motor, precision photoelectric encoder
Weight(Kg): 300

Parameters WEW-100
Accuracy 1% of indicated value
Measuring range of force(kN) 2-100kN
Subsection of force 1,2,5,10
Accuracy of deformation measurement 0.5%F.S
Clamping diameter for round specimen(mm) ;6-22
Clamping width of flat specimen(mm) 40
Clamping thickness of flat specimen(mm) 0-15
Testing space Tension 550
Compression 500
Platen size 100
Distance of bending by pass roll(mm) 30-400
Piston stroke(mm) 250
Power supply : 50Hz
Working environment Room temperature : relative humidity




Overall dimension(mm) Frame machine730x500x2000
Control System 1070x810x1730
Weight(Kg) 1370

We-a series dial type hydraulic universal testing

1. This machine adopts oil cylinder overhead (underneath) type structure, hydraulic load, hydraulic or manually clamping specimen.
2. The main machine is separated with ergo meter, connected by high-pressure oil pipe and wire, avoiding the influence of ergo meter degree when the specimen is breaking, which makes the value accurate.
3. Testing force indicator dial adopts closed type, which makes scale clear.
4. Loading speed indicator makes operation more convenient. It has three kinds speed: 0.4 rotor/min, 0.8rotor/min and 2rotor/min.
5. Automatic tracer is installed upright of ergo meter shell and can magnify the straining original shape by 2 or 4 times according to the requirements of test.


Host machine 8505652400 9006002550 11209003010 12609004000
Ergo meter 10708101730
Weightú¿kgú¬ 1440 2740 3040 4340

Test load: 0.098N (10gf), 0.246N (25gf), 0.49N (50gf), 0.98N (100gf), 1.96N (200gf), 2.94N (300gf), 4.90N (500gf), 9.80N (1000gf)
Leus/indenter switch: With hand Turret
Carriage control: Automatic loading and unloading method
Magnification of microscope:
For measurement: 400X (Object lens 40x , eyepiece 10x)
For observation:200X (object lens 20x, eyepiece 10x)
Load holding time: 5-60 second
Measuring microscope: Min measuring unit: 0.0625um
Testing field: 1-2967HV
Micro test table: Dimensions 100x100mm
Movement: 25mm in X&Y axis
Max. height of specimen: 70mm ; Max. depth of specimen: 95mm
Output: Installed with innner-printer and RS232 interface ; Power Supply: AC110V/220V 60/50HZ


Dimensions: (L ) 425 X (W) 245X (H)490mm;
Gross Weight:: 42KG, Net Weight: 35KG