Function and usage
It can set with 5 different temperature spots to do heat sealing, select the optimal heat healing temperature, and can also set the same temperature to speed up the heat sealing.
Instrument structure:
The structure of the heat-sealing tester is composed of 4 parts: pneumatic drive system, heat-sealing equipment, temperature adjustment system and time adjustment system.
Pneumatic drive system:
It includes pressure gauge, guide stick, cylinder, pneumatic valve, pressure regulating handle and so on. You can pull the pressure-regulating handle outward, rotate to the right side to adjust the heat sealing pressure to a high value, and rotate to the left side to reduce it. After setting the pressure, please press the handle to the side of mainframe to lock the air pressure.
Heating-seal device
It is composed of the upper and lower heat-sealing sticks, of which the upper one is connected with a cylinder. There is an insulating plate in the upper part, which can prevent heat transmit to the cylinder. The heat-sealing stick is made of aluminum, and the center is heater. There is a silica gel plate in the upper part of the lower heat-sealing stick, which can mitigate pressure impact during heat sealing. Temperature measurement system was installed at the back of the heat-sealing stick.
Temperature adjustment system:
The upper temperature controller controls the temperature of upper heat-sealing stick, and the rear temperature controller controls the temperature of lower heat-sealing stick. The temperature can be set at will through adjusting the button on the dial plate.
Time adjustment system:
Time adjustment system: The heat-sealing time can be set at will through adjusting the button on dial plate. The setting scope of time is 0.01s to 999.9h. Press the foot switch under the manual state, and the heat-sealing stick will be pressed together. Under the automatic state, the press-fitting time of upper and lower heat sealing sticks are controlled by a timer automatically, it can automatically recover later. The unit of timer is 0.1 second in general. There is time adjusting button on the panel of the timer, and the heat-sealing time can be adjusted at will.
Specifications
Power : AC220V 50HZ
Compressed air: 8kg/cm2
Heat sealing plane: 300mm10mm slick (With silicon pad in lower seal stick)
Heat sealing temperature: room temperature 20~300C (Precision 1C)
Heat sealing time: 0.01s~99.99h
Heat-sealing pressure: 0~0.8Mp.
Dimension: 700(L)mm400(W)mm540(H)mm
Weight: Desktop 30Kg.
700mm(L)X400mm(B)X540mm(H)
Supplier: Gas lighter, led screen protector ( not even in domestic ), refill paper cups, table runner, earing brass clamp, auto brass electric parts, cashew nuts, wire mesh, petha sweet, niwar, mohini powder, vermicompost, dry bath incubator, test tube plastic, sordium citrate tube, health care product, ornamental freshwater fish, safed musli, used polymer bag, cotton linter, auto hood cover,
areca plate, rice
Supplier: Flanges: slip on, welding neck/long welding neck, socket welding, threaded, blind/bossed blind, orifice, special flanges as per customer drawing, fasteners (socket head, set screw, counter sunk, button head, hexagonal head bolts & screws, hex nuts) washers, dowel pins (parallel pins, taper, knurled pin, spiral pin, grooved, clevis), guided bushing, friction grip bolt, cold forged components, gear shaft, spline shaft, kick shaft, ball pins, ball rods, shaft for alternator or stators, brake scam, piston pin, material grades like alloy steel 8.8, 10.9, 12.9, 45h, 14.9, 14k, stainless steel a1, a2, a3 & a4, 204, 410, 416, 431, 420, brass, aluminum v65/2024, titanium bt16, gears, timing belts, bearings, gaskets, o rings, seals, keys, grinding wheels and abrasive paper, welding rods, hexagonal wrench, a4 papers reams, tapes, corrugated sheets, boxes, cnc, vmc machine precision component(turning, milling, moulding & fixtures tools).
Supplier: Electronic components like sockets, fluke product like electronic tester, hand tools, ic testers & programmers, interactive whiteboard, lab furniture, soldering & de soldering systems, test & measurement instrument, variac & dimmerstats
