Find Verified Temperature Head Transmitter Suppliers, Manufacturers and Wholesalers

• Universal PC programmable (PCP)
• 2 wire technology, 4 to 20 mA analogue output
• High accuracy in total ambient temperature range
• Configuration during measurement using configuration kit
• Customer specific measurement range setting
• Wide measurement range, according to requirement
Field of application
• PC programmable (PCP) Temperature head transmitter for converting the input signal into a standard 4 to 20 mA analog output signal
• Input: Resistance thermometer (RTD) Pt100
• Configuration using a PC with MS180 configuration kit (MS180-PC).



Appearance and Size (in mm)

NOTE: When order, please specify the measuring range, we’ll offer programming tool if needed.

MS181 is an intelligent temperature transmitter module which can be programmed through a PC with Configuration Kit. It has measurement input for resistance thermometers (RTD) ,thermocouples, resistances or millivolt signals in 2-,3- or 4-wire connection, and converts various input signals into a 4~ 20mA analog output signal after linear processing. Isolation is provided between the input and output. A special signal can be set in advance while the sensor burnout or short.
Primary Technical Characteristics
Programmable Use the MS181 programming tool
Measuring range Set via PC
PC Interface USB/RS232
Input type RTD, TC, R or Millivolt signal
Convert accuracy ¡Ü0.1£¥FS
Cold junction accuracy ¡À1(TC)
Output 4¡«20mA/20¡«4mA Electrical isolation output
Max-load £¨V -8V£©/0.025A£¨Current output £©
Limit current ¡Ü25mA
Response time 1s
Isolated voltage 1500V AC (input/output)
Alarm signal Programmable
Underranging linear drop to 3.8 mA
Overranging linear rise to 20.5 mA
Sensor break or short-circuit:
¡Ü3.6mA or¡Ý21.0mA
Power supply 8¡«30V DC
Temperature drift 0.01£¥ FS / 1
Long-term stability ¡Ü0.1 per year or 0.05£¥ per year
Ambient -40¡«+85

2-wire technology and analog signal output (4-20mA)
High accuracy in total ambient temperature range
Wide power supply range (voltage)
Easy programming (calibration) via HART modem

MS183 , a smart 2-wire in-head and dual-input transmitter module with HART® -protocol, has measurement input for resistance Thermometers (RTD), thermocouples, resistance or millivolt signals in 2-, 3- or 4-wire connection and converts various input signals into a standard 4 to 20 mA analog(high selector, average value or D-value) output signal or 2-way digtal output signals with HART® -protocol after linear processing. The transmitter is programmable directly from PC or via the HART communication. Isolation also is provided between the input and output. A special signal can be set in advance while the sensor burnout or short.
Primary Technical Characteristics
Programmable Use PC or the hand operator
Measuring range Set via PC or by the hand operator
Input type Dual-input ( RTD, TC, R or Millivolt signal)
Convert accuracy ¡Ü0.1£¥FS
Cold junction accuracy ¡À1¡æ(TC)
Output 4¡«20mA/20¡«4mA Electrical isolation output
HART ¨CProtocol output (2-way)
Max-load £¨V -16V£©/0.025A£¨Current output £©
Limit current ¡Ü25mA
Response time 1s
Isolated voltage 1500VAC (input/output)
Alarm signal Programmable
Underranging linear drop to 3.8 mA
Overranging linear rise to 20.5 mA
Sensor break or short-circuit:
¡Ü3.6mA or ¡Ý21.0mA
Automatic switching while sensor damaged
Power supply 16¡«30V DC
Temperature drift 0.01£¥ FS/1¡æ
Long-term stability ¡Ü0.1¡æ per year or 0.05 £¥per year.

Product Overview

NCS-TT106 smart temperature module, using the fieldbus technology, is a new generation of smart fieldbus temperature transmitter and it is an indispensable field device for process control.

Features

Support multiple thermal resistance and thermocouples
Thermal resistance supports 2/3/4-wire connection mode
Thermocouple can use cold end compensation function
Better accuracy: PT100 ±0.3 ; K-type ±0.4
Universally programmable for various input signals
Available protocols: HART /FF H1 /PROFIBUS PA
Parameter

Value

Input Signal

Resistance: PT100, CU50, CU100, 0~500Ω, 0~4000Ω

Thermocouple: B, E, J, N, K, R, S, T

Voltage signal: -100mV~100mV

Channel Single

RTD Wiring 2-wire, 3-wire, 4-wire

Bus Power 9~32 VDC Current consumption (static): â?¤14mA

Bus Signal Communication ratio 31.25Kbit/s, current mode

Isolation Between terminal and housing: 1kV

Working Temperature -40~85

Humidity Range 10%~90%RH

Start Time â?¤5s

Refresh Time 0.5s

EMC GB/T 18268-2000

Protection IP20

Signal Type Suggested Range ()

Accuracy
Resistance 0~500Ω,0~4000Ω ±0.05%
PT100 -200 ~ 850 ±0.2
PT1000 -200~ 850 ±0.1
CU50 -50 ~ 150 ±0.3
CU100 -50 ~ 150 ±0.2
mV -100mV ~ 100mV 0.05%
B 500 ~ 1810 ±1.0
E -200 ~ 1000 ±0.4
J -190 ~ 1200 ±0.4
K -200 ~ 1372 ±0.4
N -190 ~ 1300 ±0.8
R 0 ~ 1768 ±1.0
S 0 ~ 1768 ±1.0
T -200 ~ 400 ±0.4

The ZP series Temperature Transmitter is designed to meet common Single Point measurement application requirements. This transmitter can easily work with a variety of sensors (RTDs and thermocouples) and thermowells. It provided in a head mount configuration suitable for installation in a wide variety of connection heads and housings. A PC-programmable interface is available, providing an easy-to-use configuration method from any PC.

Basic temperature transmitter offers a reliable solution for temperature monitoring points, provides flexible and reliable performance in process environments, Excellent performance with low temperature drift and auto zero calibration, reducing the need for expensive extension wires and multiplexers.

Power Supply 8.5VDC~32VDC
Input Types 4-20mA / 20-4mA;
RTD(PT100,PT200,PT500,PT1000,Cu50);
R(0-400 ,0-4000 );
TC(K,E,S,B,R,J,T,N);
mV(-80-+80mV);
V(0-1V)
Output signal types 4-20mA or 0...1/5V, 0...1/10V
Response Time < 0.4S (0-90%,100%-10%)
Precision �±0.05%
Temp. Drift 0.01% per Celsius
Volt fluctuation influence �±0.005% X span / below V DC
Load Capacity < 700 in 24VDC; (mA output)
< 1060 in 36VDC (Volt output)
Isolation Strength AC1500v 1min between the input / output
IP Ranking Casing/Terminal IP50/IP20

- Great performance with excellent RTD sensor element
- 2-Wired 4~20mA output
- IP65 class for the extreme condition use

Head Mounted Temperature Transmitters

MS182 is a smart in-head transmitter module with HART® -protocol. It has measurement input for resistance Thermometers (RTD), thermocouples, resistance or millivolt signals in 2-, 3- or 4-wire connection, and converts various input signals into a standard 4 to 20 mA analog output signal after linear processing. The transmitter is programmable directly from PC or via the HART communication. Isolation is provided between the input and output. A special signal can be set in advance while the sensor burnout or short.
Primary Technical Characteristics
Programmable Use PC or the hand operator
Measuring range Set via PC or by the hand operator
Input type RTD, TC, R or Millivolt signal
Convert accuracy 0.1£¥FS
Cold junction accuracy ¡À1(TC)
Output 4¡«20mA/20¡«4mA Electrical isolation output
HART ¨CProtocol output
Max-load £¨V -13V£©/0.025A£¨Current output £©
Limit current 25mA
Response time 1s
Isolated voltage 1500V AC (input/output)
Alarm signal Programmable
Underranging linear drop to 3.8 mA
Overranging linear rise to 20.5 mA
Sensor break or short-circuit:
3.6mA or ¡Ý21.0mA
Power supply 13¡«30V DC
Temperature drift 0.01£¥ FS/1
Long-term stability 0.1 per year or 0.05 £¥per year
Ambient -40¡«+85.

ABB Make TTH200 Head Mounted Temperature Transmitter Model:TTH200.Y0.H.BS-.EM..GHA...D3.SF.Z2.C07.M5
Communication Protocol:HART, programmable, output signal 4 ... 20 mA
Display Options:LCD indicator type AS
Mounting Options:Snap-on fixing set for 35 mm rail acc. EN 60175 (incl. fixing screws)

MS150 Series multi-channel temperature monitor is a multi-point temperature measurement instrument. It takes the highest measured temperature in measuring loops as its output signal which is sent out in the form of a 4 to 20 mA standard current signal and the temperature is displayed by the built-in LED. If required, temperature at any measuring point can be shown by operating the keys on panel. Isolation is provided between the input and output.
It is mainly used in the applications of multi-point temperature measurement or alarm warning system. By adopting SMT technology, it offers excellent accuracy, reliability and anti-disturbance.
Primary Technical Characteristics
Measuring range 0¡«100¡æ¡¢0¡«150¡æ¡¢0¡«200¡æ
£¨according to user's demand£©
Input type Pt100,Cu50£¨TC if specially required£©
Measuring Points 2,3,4,5,6 points
Convert accuracy ¡Ü0.5£¥FS
linearity error < 0.1%
Output 4¡«20mA Electrical isolation output
Digital display LED
Display accuracy 0.5%
Voltage drop for display 3V
Isolated voltage Drop 2V
Isolate Voltage 1500V AC (Input/Output¡¢with isolator)
Max-load £¨V -14V~16V£©/0.025A£¨Current output £©
Limit current ¡Ü25mA
Response time 1s
Power supply 14~30V DC
Temperature draft 0.025% FS/ 1¡æ
Long-term stability ¡Ü0.1¡æper year or 0.05£¥ per year
Ambient -40~+85¡æ£¨Aluminium alloy .Casing£©
-25 ~+75¡æ£¨Plastic Casing£©
Protection level IP66£¨Aluminium alloy£©/IP62£¨Plastic£©
Anti-RFI >10v/m(80MHz¡­¡­1000MHz).

Universal head transmitter anl 181

Universal head transmitter for resistance thermometers (rtd), thermocouples, resistance and voltage transmitters, settable using a pc, for installation in a sensor head (form b), compatible tmt 181.
Areas of application
Pc programmable (pcp) temperature head transmitter for converting various input signals into an scalable 4 to 20 ma analogue output signal
Input:
Resistance thermometer (rtd)
Thermocouple (tc)
Resistance transmitter (ohm)
Voltage transmitter (mv)
Online configuration using pc with anl 181 configuration kit and pc-software anly win 2000 (compatible e+h readwin 2000)
Benefits at a glance
Universally pc programmable for various signals
Galvanic isolation
2 wire technology, 4 to 20 ma analogue output
High accuracy in total ambient temperature range
Fault signal on sensor break or short circuit, presettable to namur ne 43
Emc to namur ne 21, ce
Ul recognized component to ul 3111-1
Ship building approval gl
Online configuration during measurement using setup connector
Output simulation
Customer specific measurement range settings or expanded setup
Technical data
Input: Rtd, tc, ohm, mv
Output: 4 to 20 ma
Supply voltage: 8 to 35 v dc (non-ex-area)
8 to 30 v dc (ex-area)
Operation: Pcp (pc programmable)
Installation: Sensor head form b
Field housing

- Material : Stainless Steel Core, Polyethylene Yarn, Span Yarn
- Number of Stitiches : 10 Gauge
- Length : 14 inch
- Cut Level : 5
- Color : Gray, Black, White
- Packing : 1pair/individual packing (1pack=5pair, 1box=200pair)
- Origin : Made in South Korea
- Purpose : Cut Resistant

High precision temperature transmission
Optimized for precision industry
Configurable analog signal transmission (4-20mA)
Communication via RS485 MODBUS (PC-HMI and PLC)
Built-in LCD
Simple and sleek design

Electrical Instruments/Temperature transmitter HM-TC256
Deyang YOYIK skill is strong, the production of strict accordance with national standards. With the power station forging, mining metallurgy, rolling, cement and spare parts spare parts, metallurgy, rolling and other products improve the production and operation system. For hundreds of water technology change, hydropower, thermal power plant overhaul supply of high-quality equipment selection, equipment commissioning, construction plans, spare parts, after-sales service, such as through-train service. The company to undertake hydropower stations, thermal power plant unit capacity transformation, technical transformation and overhaul projects. Look forward to the major manufacturers to inquire.

#DF-Electrical Instruments/Temperature transmitter HM-TC256-DF
Anti interference LVDT Sensor TD-1K-150-15
circuit board ME5.530.004
Eddy Current Sensor PR6422/101-010
MSV LVDT TDZ-1E-022 0-250
Dual vibration motinotor HY-3V
Overvoltage protection device RV3+
Vibration Sensor ST-A3-B3
Pressure Switch SG307-F-V2-150
pressure gauges for sale MIX7B62B24
thermocouple manufacturer TE-302
Sensor DF310580-90-07-02
THERMO EXPANSION MONITOR DF9032/03/03
SPEED MONITOR XJZC-03A/Q
Electric actuator SA07.6-F10
Anti-Corrosion Liquid Level transmitter MIK-P261/400-0651-315
temperature sensor WRNK2-331T
thermal resistance of aluminium WZPM2-001, Pt100, L=46
Sensor TD-2 0-80mm
magnetic pickup tachometer ZS-01 L=90
Turbine Speed Monitor HZQW-03A
Axial Displacement Sensor WT0112-A90-B00-C01
Sensor DF310805
TSI Axle Vibration Card MMS6110
Magnetic level gauge UHZ-10C07N
FTV Lens Tube FTV-A-1
boiler water level sensor CEL-3581F/G CREMER
type j thermocouple metals TE-205
thermocouple W5007.1-25
resistance thermal detector WZRK-105 L=400mm
Auxiliary power PSMU-1-5V/120W
cam bien ap luc truoc luoi chan rac RC861CZ090HY914
Electrical Instruments/Temperature transmitter HM-TC256

ZYR-DFYL-2025-2-21

Description:
CJBT-I utlizes specific temperature module,can modify kinds of thermocouple,hot resistance, then output standard analog signals.It is high accuracy,strong anti-interference,anti-explosion,heat resistance,anti-knock.

Features:
Wide measure range
All material is Stainless steel
Various Pressure port type
Protection Grade: IP65

Application:
Measure temperature of gas or liquid which is compatible to 316L stainless steel
Used in field of petroleum, chemical industry, Metallurgy, Electricity, hydrology etc.

Performance Parameters:
Measure Range: -551200
Accuracy: ±0.5%typical ±1.0%MAX
Long term stability: ±1.0%F.S/year
Working temperature: -20~80
Power Supply: 1530VDC
Output signals: 420mA 15VDC
Pressure Port: M27Ã?2 or customize
Shell Material: Stainless Steel 1Cr18Ni9Ti
Wire: polythene
Protection Grade: IP65

Features: Suitable for industrial application. Integrated design combines PT100 and transmitter. Easy installation.
Sensor type: RTD Pt100
Measuring range: -50 ... 200 C
Output: DC 4 ... 20 mA(2-wire)
Accuracy: 0.5% F.S.
IP rating: IP65

Features:

1. Real-time monitoring of grain temperature to prevent spoilage
2. 1-wire digital temperature sensors
3. Unique temperature/level (EST120) monitoring cable
4. 98.5ft (30m) maximum cable length
5. Customizable number and location of temperature sensors
6. Simplified and lower installation costs using digital technology, wired or wireless
7. Operator interface with remote monitoring PC-software

Humidity and temperature sensor transmitter
Digital frequential ouput
Nominal frequency 6.5 khz
Std sensitivity 13 hz/%rh
Response time 0.3 s
Response time with
Optional protection : 20 s
Accurcy-interchangeability :
3 %hr de 3 a 97%rh
Hysttrtsis <1.5%rh
Measurement range 0 a 100 %hr
Operating range : -40ªc a +80ªc
Supply voltage : 4 a 12v
Ouput resistor : 0, 2 k
Output courant : ª2 ma
Thermistance ntc 10 k a 25ªc
Operating range : -40ªc a +80ªc
Courant max : 0.3 ma

8x9x4 mm3