Jigging machine belongs to gravity-based equipments, which can separate mineral based on differing of specific gravity. Gandong saw-tooth wave jig is mainly consist of three parts: main frame, driving set and jigging chamber.
Application
Jigging machine is widely used in gravity concentration of tin, tungsten, placer gold, hematite ore, manganese, titanium, antimony, lead, tantalum, niobium and other minerals.
Features
The pulsing curve of the traditional jig is sinusoidal waveform, the up and down speed of water flow and acting time produced by the movement of membrane are almost same, so it is unfavorable to loose of jig bed and layering of minerals based on special gravity, and thus affect separation ability and recovery rate. Saw-tooth wave is energy economy gravity equipment that is developed and improved from traditional jig on the basis theory of jig bed layering. Its jigging pulsating curve is similar to saw-tooth wave, which makes the up speed of water flow quicker than down speed of water flow, so it can improve looseness of jig bed and reduce suction action, which can lead to fully settlement of heavy particles in slurry, it highly improves separation ability and recovery rate. Stroke and frequency of stroke are adjustable.
Application of shaking table
Concentrating Tables are designed to wet gravity-based separation of minerals and other granular materials.
There are many applications where the concentrating table is of particular value and cannot be equaled for economical and efficient performance. They are effective in processing precious and base metal, rare metal and non-metallic minerals.
Construction
Head Motion: The head motion is of rugged construction and requires minimum maintenance. Its internal mechanism is splash lubricated from an integral oil sump.
Decks: The decks are built of 16 mm zircon-reinforced fiberglass with fabricated steel frames at the bottom and are easy to clean, requiring little maintenance. The specific gravity of fiberglass made into decks is one third of that of steel, while its strength reaches as high as 70% that of steel. This fiberglass desks also has the characteristic of water-resistance and corrosion-resistance and can hold the shape unchangeable at f+50f¦.
Feed and Water Box: A wooden feed distributing box with hopper and a long water box are attached to the iron of the deck, giving a very even distribution of feed and water.
Base: A choice of ordinary type, groove steel support or big channel steel support is available.
Technical Specification
The Gandong Shaking Tables have three distinct deck designs available.
The course ore deck is designed for recovering particles sized from 0.5 mm to 2 mm; the fine sand deck is designed for recovering fine particles in the range of 0.074 mm to 0.5 mm; the slime deck is designed for recovering super extremely fine particles in the range of 0.05 mm to 0.074 mm.
Spirals are gravity concentrators and separate minerals of different specific gravity according to their relative movement in response to gravity, centrifugal force and other forces in the fluid medium. It has extremely good performance and effects in processing placer of beach, riverside, seashore and stream.
í¦Gandongí¦ Spirals are made of polyurethane lined fiber glass with wearable corundum inner surface.
Generally there are 5 turns in one start, single, twin, triple and quad starts available per column to suit capacity requirements.
Application
Rutile, ilmenite and zircon concentration
Iron ore, chromite and manganese beneficiation
Tin, tantalum and ore concentration
Gold, native copper and base metal recovery
Silica sands processing
Titano-magnetite concentration
Feature & Benefits
Reasonable structure and small occupation area
High recovery, high efficiency, and precise separation,
Light in weight, rust and corrosion resistant;
Simple installation and Minimal maintenance requirements
Low operating cost and long operating life
Reliable running with minimal operator attention
Strong adaptability to fluctuation of feeding amount, density, size and grade.
Concentrator is kind centrifugal concentration equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. It is also used to recover gold from the old tailings.
Three models are available. Application shows that the recovery can be as high as 99%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of í¬0. 074mm, the recovery for the natural gold is expected up to 98%. For that natural gold of 0.004mm in particle size, the recovery is 97%. The cleaning up cycle is 1~4 hours, and the upgrade ratio is up to 1,000 times. The equipment is patented in China.
Spirals are gravity concentrators and separate minerals of different specific gravity according to their relative movement in response to gravity, centrifugal force and other forces in the fluid medium. It has extremely good performance and effects in processing placer of beach, riverside, seashore and stream.
Gandong Spirals are made of polyurethane lined fiber glass with wearable corundum inner surface.
Generally there are 5 turns in one start, single, twin, triple and quad starts available per column to suit capacity requirements.
Application
Rutile, ilmenite and zircon concentration
Iron ore, chromite and manganese beneficiation
Tin, tantalum and ore concentration
Gold, native copper and base metal recovery
Silica sands processing
Titano-magnetite concentration
Features & Benefits
Reasonable structure and small occupation area
High recovery, high efficiency, and precise separation,
Light in weight, rust and corrosion resistant;
Simple installation and Minimal maintenance requirements
Low operating cost and long operating life
Reliable running with minimal operator attention
Strong adaptability to fluctuation of feeding amount, density, size and grade.
298 Saw Tooth Wave Ladder Jig Suppliers
Short on time? Let Saw Tooth Wave Ladder Jig sellers contact you.
Jig is one of the relative new methods for gravity concentration. As a rougher or cleaner device, it is widely applied on the separation of gold, tin, tungsten, titanium, hematite, coal and other minerals due to its high processing capacity, large range of separation size and simplicity of operation and maintenance.
Sawtooth wave jig is a new type of jigs,It is one of the types of modern gravity separation equipment. New it has formed series whose use is expanded. Such type of jig uses electromagnetic stepless speed regulation which features even rotation, smooth ore current, strong adaptability to selected materials, good separation effects of medium and fine grains, and water saving.
Sawtooth wave jig is a energy-saving gravity concentration device which is based on the traditional jig according to the distribution rule of jigging bed theory, its jig pulse curve likes the saw-tooth waveform which makes the upward flow faster than the downward; the upward flow time is short, the downward is long, which overcomes the shortcoming of upward flow, downward flow and action time produced by the sine-wave pulse curve, enhances the loose degree of the bed and alleviates the inhalation effects, then the heavy mineral particles in the ore are fully settlement, which enhances the sorting ratio and recovery of equipment. Compared with the sine-wave jig, the recovery of Sn increases 3.01%, W: 5.5%, Pb: 1.63%, Zn: 2.04%, respectively; water consumption is reduced by 30%-40%, site area is decreased 1/3, the stroke can be adjusted, dragging by the electromagnetic adjustable speed motor makes the pumping speed can be adjusted endlessly. Its performance reaches the domestic advanced level, it is one of the ideal energy-saving gravity concentration equipments.
Features:
High quality ,precision manufacturing
High capacity, high recovery ratio,
Widely use range, large range of separation size,
Energy conversation, no pollution
Simple installation and easy to maintenance
The work safe and reliable, long working life
Technical Parameters
Model
JT1-1
JT2-2
JT3-1
JT4-2
JT5-2
JT series Saw-tooth Wave Jig is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jig. The difference between Saw-tooth Wave Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Bed layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit screen surface, decrease of lower limit of grain size recovery and large save of make-up water for under size fraction.
In practice, contrast of Saw-tooth Wave Jig and Sine Wave Jig shows up raises of recovery of Saw-tooth Wave Jig: Sn:3.01%, W:5.5%, Pb:1.63%, Zn:2.04%.Shicheng Pioneers Mining Machinery Manufacturer Factory has strong technical advantage and production power on rougher jig machines production, and wins customers¡¡¥ support and trust deeply.
HongSheng Saws Manufacturing band saw blade is made of superior material with excellent technology. Our heat treatment technology ensures excellent flatness, stable straightness, homogenous surface, and reduces machining time remarkably. In order to meet sophisticated and diversified customer needs, we provide our customers a variety of sizes, tooth profiles with prompt delivery.
Condition of supply & treatment of saw blades:
1- setting teeth left and right
2- teeth point hardening
3- welded in loops / endless
4- packed in coils (100 meters per coil)
HongSheng Saws Manufacturing band saw blade is made of superior material with excellent technology. Our heat treatment technology ensures excellent flatness, stable straightness, homogenous surface, and reduces machining time remarkably. In order to meet sophisticated and diversified customer needs, we provide our customers a variety of sizes, tooth profiles with prompt delivery.
Condition of supply & treatment of saw blades:
1- setting teeth left and right
2- teeth point hardening
3- welded in loops / endless
4- packed in coils (100 meters per coil)
1.Quality case material ,durable and anti-fall.
2.strong,beatand fall resilient metal housing.
3.Rubber soft handle for more comfortable use.
4.Low vibration for easy use
1.Quality case material ,durable and anti-fall.
2.strong,beatand fall resilient metal housing.
3.Rubber soft handle for more comfortable use.
4.Low vibration for easy use
Saw Tooth Greenhouse China Glass Greenhouse manufacturer
The Saw Tooth model greenhouse combines optimal ventilation with special strength for withstanding different loads.
PRODUCT PARAMETERS
Can be customized according to your requirements
PRODUCT FEATURES
The Saw Tooth model greenhouse combines optimal ventilation with special strength for withstanding different loads. The roof ventilation alone provides 25% of the total ventilation of the covered area, in addition to the side ventilation. The shape of the arches allows excellent light transmission.
Advantages:
Easy to assemble, cover and maintain
High roof openings for natural ventilation
Optimal heat and humidity release
Structure suitable for warm climates
custom Saw Tooth Greenhouse Specifications
Basic columns - 3" diameter - every 4 meters
Arches -2" diameter every 4 meters
Roll-up curtains on side wall openings and on roof openings
This type is suitable for polyethylene coverings only
We can design and install farming and planting greenhouse for you according to your needs. You can choose single span greenhouse or multi span greenhouse, or contact us directly for the latest design!
The main sales all kinds of greenhouse: Single Span Greenhouse, Multi Span Greenhouse, Glass Greenhouse, PC Board Greenhouse
For more information about the greenhouse, please click here.
298 Saw Tooth Wave Ladder Jig Suppliers
Short on time? Let Saw Tooth Wave Ladder Jig sellers contact you.
