Centrifugal Separator

Description

The centrifugal concentrator, a kind of gravity separation equipment, is suitable for the separation of heavy medium minerals that have enough specific gravity differences.

STLB concentrator is kind centrifugal concentration equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. It is also used to recover gold from the old tailings.

Since 1985, three models have been developed. Application shows that the recovery can be as high as 99%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of 0.074mm, the recovery for the natural gold is expected up to 98%. For those natural gold of 0.004mm in particle size, the recovery is 97%. The cleaning up cycle is 1~4 hours. And the upgrade ratio is up to 1,000 times.

Working Principle

Water jacket centrifugal concentrator is forced by centrifugal force increases mineral centrifugal acceleration, the minerals in the centrifuge spins a few times to get the equivalent in gravity state, then the proportion of mineral difference is magnified several times, Together with recoil mineral water to prevent compaction, thereby fine, mineral beneficiation achieve good results.

Main models:

D20 with 1-2t/h capacity
D30 with 2-7t/h capacity
D60 with 15-30t/h capacity
D80 with 30-70t/h capacity
D100 with 60-100t/h capacity

Model: shale shaker QZS703
Vibration force: 76kn
Capacity(m3/h, gpm):90/396
Screen meshes:40-200meshes.


Weight:1960kgs
Dimension:2580x1840x1640mm.

Mud System Manufacturer

PRODUCT DESCRIPTION
TBM(is short for Tunnel Boring Machine) slurry separation  plant.
TBM construction technology is the top technology in trenchless field.

An efficient TBM slurry separation plant is the basis for the successful use of slurry-supported tunnel boring machines(TBM). The DC Slurry separation plant is popular for project of AVN Machines, Mixshields or Shaft Sinking Machines.

As DC Manufacture shale shakers, desanders, desilters, decanter centrifuges. So DC Solids Control is able to provide complete solutions for TBM slurry treatment project.

Advantages of TBM slurry separation plant:
1. Customized design system with international standard equipment for your choose.
2. Complete after sales from DC solid control office
Double deck shale shaker will increase the capacity with less foot print.
3. High G force shale shaker and high speed decanter centrifuge with high efficient slurry separation.
4. OEM for full line of shaker, desander, desilter, and decanter centrifuge.
5. Compact structure design for fast movement.

Oilfield Drilling Equipment Oilfield Solids Control Equipment

PRODUCT� DESCRIPTION
the second equipment in solids control system it is used to separate solid phase particles whose diameter is 40 75 m.
Select Special wear-resistant polyurethane material hydrocyclones.
Inlet tangential feeding,smooth transition ,which help to improve separation efficiency and have a wide range of separation sizes.
Symmetrical feeding design can make the liquid distribution to be more reasonable and stable.
Size of the underflow hole of the hydrocyclone can be adjusted in order to control the handling capacity of the equipment.
Different specifications and quantities of hydrocyclones can be matched according to the handling capacity that customer required.

Mud Gun DESCRIPTION
Mud Gun is also called drilling fluid gun which is solid control equipment produced by DC Solid control.

Mud Gun is divided into low pressure, medium pressure and high pressure. It is located in the top of the drilling fluid circulating tank and mainly used in the tank corner to prevent solid precipitation or and wash the bottom of the tank,it also can transport the mud between tank and tanks. Besides, mud guns can be supplied by centrifugal pump or mud pump.
Mud Guns produced by our company have the advantages of good spray effect ,large clean area,simple structure,flexible operation and easy to use.

Mud Cleaning Equipment Factory

Description Of Drilling Mud Mixer
Jet mud mixer is a specialized solids control equipment used for configuring and aggravating drilling fluid , thus change the density , viscosity and pH of drilling fluid.

DC uses venturi tube combined with original jet nozzle created a new design of jet mud devices, not only simple in structure, but also have strong feasibility, which can meet the aggravation and configuration of drilling fluid in drilling solid control system from 1500m to 9000m.
We can also produce double jet mud mixers according to customers' requirements. Jet mud mixers produced by DC have the advantages of high mixing speed, safe and reliable performance, long service life and ect.