Find Verified Remote Controls Suppliers, Manufacturers and Wholesalers

Universal input pid process controller
With smart i/o module system

- 4 digits process (pv) and
4 digits process set (sv) display
- universal process input
(tc, rtd, mvz , vz , maz)
- optional secondary sensor input
- dual or multi point calibration
For zvoltage / current input
- configurable on/off, p, pi, pd and
Pid control forms
- adaptation of pid coefficients to the system
With auto-tune and self-tune
- manual/automatic mode selection
For control outputs
- bumpless transfer
- smart i/o module system
- programmable heating, cooling and
Alarm functions for control outputs
- motorized valve control function
- 8 steps profile control ( ramp & soak ) function
And start-hold-stop by using logic input module
- remote set point function by using analogue input modules
- retransmission of process value or process control
By using 0/4...20 maz current output module
- detection of heater failure by using 0...5a vct input . Module
- hardware configuration by using input/output modules
- rs-232 (standard) or rs-485 (optional) serial communication with modbus rtu protocol


Application fields applications

Glass motorized valve control
Plastic profile control
Petro-chemistry pid process control
Textile heater failure detection
Automative
Machine production industries

Features

3 phase mains and 3 phase generator voltage measurement,
3 phase load current and earth current measurement,
Contactor open and close relay outputs for mains and generator,
Configurable 6 inputs and 4 outputs,
3 resistive sender inputs for oil pressure, temperature and level,
Stop or fuel selenoid selection,
Programmable weekly working permit calendar,
Maintenance warning (working hour or elapsed month),
Exercise at programmed time intervals,
Off, manual, auto and test mode,
Power measurement by kva, kw, kvar, kvah, kwh, kvarh,
Compatible to diesel or gas generators

* sends sms to pre-defined gsm numbers for alarms
* controls the generator and monitors status information of the generator by sms
* remote control via internet, intranet, gsm or dial-up modem
* access to multiple generators by gen-agent scada software
* authorised access, secure communication
* suitable for telecommunication projects
* automatic transfer switching control and engine control
* logs last 32 events & alarm informations
* full metering facility, energy and power measurement

professional fingerprint & RFID lock system for Hotel and home & office.keep high safely for home and office.and hotel.
Multiple unlock mode: Fingerprint ,Password,Smard Card and Combination Mode.
High sensitive touch keypad with blacklight ,easy use even in the darkness
Easy operation thanks to the humanity and clear voice guidance.
Fingerprint sensor auto power on due to the IR senor embedded
Support scramble code to protect the password security
Doorbell built in offers very convenience for the visitor
Auto unclock/close with high quality motor inside.
Support DIY installation just with a screw driver.
Powered by AA Battery and with low battery alarm
Wrong try lock up function (will lock up 1Min after 5times continues wrong input)
Support external emergency battery input
Optional Remote control
password door digital lock

For semi automatic elevator doors. Operated with a retiring cam . Ce marked, double safety system .

24 units per pack .In 40*40*50 cm cardbox. Weighs 15 kg per pack.

curtains
Specifications : Motorized, workplace curtains, domestic curtains, resort curtains Light control Dust control Temperature control
Technique: Hand Woven, Woollen , polyster, Hand Tufted etc.
Size: Customized
Colors: Red, Mehroon, Golden, Brown
Material: wool, cotton, jute

Drilling and cutting process on the part of the same job
Auto tool cooler and oil system.
Industrial CNC control 15 Touch screen Panel
Lineer sliding bridge and Helix Rocks Propulsion System.
Drilling capacity : Min. M5 Max. M32 (HSS,UDRILL)
Drilling Depth : 100 mm. Max.
Drilling tool speed : 70-110 m/min.
Drilling speed : 0.15-0.35 mm/rev.
Spindell speed : 1500 RPM Max.
CNC Positioning Accuracy : 0,02 mm.
Max. (X&Y) Positioning speed : 15000 mm./min.
Bridge movement control : Dual Gantry AC Servo Drives.

ERMAK CNCHVR angle adjustable hydraulic guillotine shears are strong and easy to use machines which are able to cut any type of sheet with the best quality and speed.

Machines could be programmed easily with the use of dialog programs on CYBELEC control units. When the type, thickness and length of the sheet is entered to the controller, machine calculates and adjusts blade gap adjustment, backgauge distance, cutting length and cutting angle automatically. Cutting angle adjustment is done automatically according to sheet thickness, so during cutting thin sheets, the shortest stroke is used.

Safety machine.
*It slicers 250 gram bread up to 3 kg.
*Automatically stops after slicing.
*The difference between other machines has no risk.
*While slicing the cover prodects our fingers from the blades.
*Surface in touch with bread during slicing is made of 304 quality stainlesss stell and is sanitary for breads.
*Avaible thickness cut size is 8 mm from desired value.(not adjustable)
*24 V Control Panel
*Has 2 years guarantee for production and parts defects.

Technical Features
Width: 700mm
Lenght: 730mm
Height: 1350mm
Weight: 171 kg
Power:0,55kw.

Safety and semi automatic machine.
*It slicers 250 gram bread up to 1, 5 kg.
*Automatically stops after slicing.
*The difference between other machines has no risk.
*While slicing the cover prodects our fingers from the blades.
*Surface in touch with bread during slicing is made of 304 quality stainlesss stell and is sanitary for breads.
*Avaible thickness cut size is 8 mm from desired value.(not adjustable)
*24 v control panel
*Has 2 years guarantee for production and parts defects.

Technical featrures
Capacity:500/bread a hour
Width:620mm
Lenght:720mm
Height:1310mm
Weight:190kg
Power:0, 55kw.

Designed to meet slicing and packaging processes in the companies with high capacities.
*Breads placed on the band push each other and a continuous slicing is provided.
*Slicing is made in the desired speed through band speed adjustment.
*It is not proper for single slicing on the bench.
*Height can be adjusted in accordance with the bigness of bread.
*Machine is equipped with a packaging apparatus with fan to open the sachet as for packaging the sliced breads.
*Surface in touch with bread during slicing is made of 304 quality stainlesss stell and is sanitary for breads
*Sliced breads can easily be pushed by hand into the sachet that is opened by air. *After putting the breads in, the sachet is taken apart and the sachet down is again opened by air.
*Slice thickness can be adjusted from 8 mm up to desired value.
*It is produced with standard electrostatic kiln dyed and optional stainless body.
*It is easy to carry through the wheels.
*24 V Control Panel
*Has 2 years guarantee for production and assembly defects
TECHNICAL FEATURES
CAPACITY:1500/BREAD A HOUR
WIDTH:1180mm
LENGHT:1760mm
HEIGHT:1300mm
WEIGHT:298kg
POWER:1,59KW.

WHY FIBERMAK ?


* 60% - 100% faster compared to other laser cutting machines. Axes equipped with Bosch - Rexroth linear motors and drivers reach to 120 m/min. speed and accelerations are 2 G on Y, 1,5 G on X axes
* Cuts thin materials 3 times faster compared to Co2 lasers and energy consumption is simultaneously lower
* 70% energy save by fiber optic laser technolohy is plant friendly.
* There is no need for laser-mix gas which is used Co2 laser cutting machines as there is diode technology is used for Fibermak.
* There is no need for optical components like beam path, folding mirror and quartz tube etc. as laser transmitting is done by fiber cable
* You can make production 24 hours a day and may save 50% per each costs
* You can prevent from production faults by automation in your premises
* You save from moulds and apparatuses.
* You may cut aluminium, copper, brass and other reflecting materials precisely with smooth surface quality. (You may reflecting materials such as aluminium, copper, brass, etc. Precisely and by smooth surface quality)
* FIBERMAK has strong frame, equipped with worldwide well known, quality and long life, quality components and designed to work accurately and continously even at hard conditions.
* Fast and high quantity production capacitated ERMAKSAN reflects this advantage as price to its customers. Creative designs with always highest level technology and quality are the main principles.



EFFICIENT
High cutting speeds with integrated distance sensorShort Conversation times with fast hanging of focal lenghtsOptimized cutting gas flow FLEXIBLE
Cutting of different material thicknesses2D cuttingFocal lenght tailored to your applicationAll media connections located in upper part USER FRIENDLY & SAFE
Simple and safe cartdridge replacement system with TCP retentionSast change of protective glassMotorized focal position adjustment (optional)Temperature monitoring of the sensor insertCartdridge monitoring for presenceMagnetic breakaway coupling
POWER AUTOMATION CONTROLLER
Power Automation CNC control with integrated inputs and outputs
The open, browser-based human machine interface PA HMIThe PA 8000 LW CNCThe Pa dongle which includes all needed software functions for fiber cuttingThe I/O module PAMIO which provides 4 analog in - and outputs

FELIS Single Needle Frame Type Mattress Quilting Machine
FELIS is a frame by frame single needle computerized quilting machine. It has a moving sewing head and moving frame in order to accelerate the movements by reducing the weight of moving parts.
With the advantage of the moving sewing head, FELIS also brings 50% space requirement advantage compared to conventional frame by frame quilting machines. It needs half the space of a conventional fixed head quilter.
With the ability of quilting very different products, FELIS offers perfect quilting quality for all the products from very thin garment products to thick materials for mattress industry with multiple layers including foam, visco, memory foam, latex, polyester fiber, non woven, jacquard fabric, knitted fabric, leather and down fill.


Minimum bobbin change with XXL spools (Durkopp Adler)
Automatic thread cutting in less than 0,5 second
High operator security systems
Automatic frame measure control system
Remote & Smartphone production monitoring system
Easy pattern adaptation
Flexible and user friendly software : EtQuilt

C.K.K. 552 - Double Head Welding Machine
Welds two corners of PVC profiles
Adjustable welding pressure and profile clamping pressure.
Fully automatic and program controlled.
Has separate digital timing control for melting and cooling


Technicial Specifications
Voltage 220 V
Frequency 50 Hz
Total power 4,5 Kw
Air pressure 6 Bar
Air Consumption 70 lt/dk-min
Dimensions (mm) 890 x 4010 x 1720
Weight (Kg) 475