Drilling and cutting process on the part of the same job
Auto tool cooler and oil system.
Industrial CNC control 15 Touch screen Panel
Lineer sliding bridge and Helix Rocks Propulsion System.
Drilling capacity : Min. M5 Max. M32 (HSS,UDRILL)
Drilling Depth : 100 mm. Max.
Drilling tool speed : 70-110 m/min.
Drilling speed : 0.15-0.35 mm/rev.
Spindell speed : 1500 RPM Max.
CNC Positioning Accuracy : 0,02 mm.
Max. (X&Y) Positioning speed : 15000 mm./min.
Bridge movement control : Dual Gantry AC Servo Drives.
Each kind of casting parts (cast iron, ductile iron, cast steel, stainless steel, bronze, Al & etc.), will be prepare according to your technical drawings. For more information pls. cantact visit our webpage.
we are manufacturer of machining parts.For denmark , we have produced some haevy lathe works (asphalt machine parts) since 2008 .We are open about your machining needs
Producing and assembling the critical parts with closed tolerance made of titanium, stainless steel, aluminium alloys and brass, copper, engineering plastics etc. The company is certified to AS9100 Quality Management System and it is an approved supplier of TAI, TEI, Alp Aviation.
Medmakina is also working with main contractors on several aerospace industry projects mostly in engineering and manufacturing fields. Programs supported with aero-structural parts are; Boeing, Airbus, JSF.
Special Processes such as surface treatment, heat treatment, welding, marking etc. are outsourced to NADCAP approved suppliers.
3 unit working table
I.Table outer dimensions, 2800x1400mm
II.Table outer dimensions , 2400x1400mm
III.Table outer dimensions , 1200x1400mm
Automatic moving turbine
Manuel and automatic control
Fault control section
Waiting station
Special design mold system
Temperature measurement unit , infrared sensor
3-4 min operation time
Audible-visual fault warning system
Phase protection
Leakage relay
29 KW heater energy consumption
30 KW total energy consumption
Schneider-delta electrical-electronical system
63 m³/hour vacuum pump
71 dba noise level
1950 kg machine weight
9320mm machine length
1795mm machine width
1450mm machine height.
Working Area: 2100x3660mm
Automatic Tool Change System (7+1)
Bakelite Flat Table
X-Y1-Y2 Axis 1 Kw Delta Servo Motor R:1/9 Reducer
Z Axis 0.75 Kw Servo Breaking Motor
7.5 Kw 18.000 rpm AREL Spindle Motor
2000 m³/hour Dust Sucking System
3 Unit 100m³/hour Oil Cycle Cooling Vacuum Pump
Hust Professional CNC Control Panel
ALPHACAM 2D Software (3D Upgrading and Part Reading Specification,Optional)
Electric Systems Delta and Schneider
X-Y Axis Speed 60 m/min
Program Sensitivity 0.001mm
Working Sensitivity 0.001mm
Positioning Sensitivity 0.001mm
Maximum Power Supply 17.2 KW
X-Y Axis Moving with Helical Gear
Z Axis Moving with Screw Mil
2 Unit X Axis Linear Rail
Right and Left 4 Unit Y Axis Linear Rail
2 Unit Z Axis Linear Rail
Fault Warning and Determined
Working with ISO GCODE
Working with DXF, DWG, IGES
1 year Part 2 year service Guarantee
Free Assembly and 80 Hour Program and Machine Education
80 Unit Free Macro (Door&Cover)
Online Service
Fast Service and Intervention in 3 Workday
Automatic Time Adjustment Lubrication System
Automatic Air Sensor to Shut down system when air pressure drop.
All Axises protected by switches and sensors.
3 Unit Working Table
I.Table Outer Dimensions, 2800x1400mm
II.Table Outer Dimensions , 2400x1400mm
III.Table Outer Dimensions , 1200x1400mm
Automatic Moving Turbine
Manuel and Automatic Control
Fault Control Section
Waiting Station
Special Design Mold System
Temperature Measurement Unit , Infrared Sensor
3-4 min Operation Time
Audible-Visual Fault Warning System
Phase Protection
Leakage Relay
29 Kw Heater Energy Consumption
30 Kw Total Energy Consumption
Schneider-Delta Electrical-Electronical System
63 m³/Hour Vacuum Pump
71 Dba Noise Level
1950 Kg Machine Weight
9320mm Machine Length
1795mm Machine Width
1450mm Machine Height
The 2-Axis series of CNC automatic lathe is gang type tools holder design which could save tool change time. 2-Axis series also can be used with servo motor live tool.
Standard Accessories
•OD Turning tool holder x 3pcs
•Drilling tool holder ER-16-Ø20(One station) x 2pcs
•Drilling tool holder ER-16-Ø20(Two station) x 1pc
•ER-16 collet chuck x 3pcs
•Parts catcher
•Tool box
•Heat exchanger
•Operation manual
•Interface for bar feeder
Optional Accessories
•1-position cross drilling tool holder (servo driven)
•1-position face drilling tool holder (servo driven)
•3 meter hydraulic barfeeder
•Parts conveyor
•Chip conveyor with cart
•Transformer
•Voltage stabilizer
•4" 3-jaw chuck
•6 position hydraulic turret
•CE certification
Max.swing over bed:440mm
Max.turning diameter:200mm
Max.turning lengh:215mm
Spindle speed range:45~4000rpm.
Number of tool station: 8
Turret indexing time: 0.3sec
Machine design: 20° deg
Max stroke X-axis:120 mm
Max stroke Z-axis: 225 mm
Slide way type: Square way
Spindle motor: 5.5 kw
Controller: Fanuc/Mitsubishi.
Max.swing over bed mm 440
Max.turning diameter mm 200
Max.turning lengh mm 215
Material collect length mm 100
Spindle max.bar capacity mm 42
Spindle bore diameter mm 55.5
Spindle nose A2-5
Spindle speed range Rpm 45~4000
Spindle motor Kw 5.5(7.5)
Number of tool station 8
Max.stroke X-axis mm 120
Max.stroke Z-axis mm 225
Rapid traverse X -axis m/min 12(16)
Rapid traverse Z- axis m/min 12(16)
Turret indexing time Sec 0.3
Machine design deg 20°
Slide way type Square Guide way
Spindle hydraulic chuck inch 6"
Turning tool diameter mm 20
Boring tool diameter mm 25
Hydraulic motor kw 0.75
Lubrication motor w 3.5
Power requirement Kva 15
Coolant tank capacity L 100L
Machine dimensions(L*W*H) mm 2255*1800*1800
Weight kg 2235.
Table Surface Mm 610*1400
T-Slots Mm 18*5*100
Table Loading kg 1200
X Axis Longitudinal Travel mm 1200
Y Axis cross Travel Mm 600
Z Axis Vertical Travel Mm 600
Spindle Center to Table Surface Mm 120~720
Spindle Center to column Surface Mm 610
Door opening Width Mm 1400
Spindle Taper(Standard/Option) BT40
Spindle Speed Rpm 8000/10000,12000
Rapid Feed Rate M/min 30(Linear X.Y)20(Box Z)
Cutting Feed Rate Mm/min 5-10000
Spindle motor(Standard/option) HP 20
3 Axes Motor(X/Y/Z) kw 3/3/2
Auto Tool changer(Standard/option) 20/24
Power Requirement kw 30
Air Pressure KGS/CM² 6
Cooling Motor HP ¾
Cooling Tank Capacity L 300
Machine Weight kg 7000
Machine Size(L*W*H) mm 3200*2200*2500
Controller.
Table Surface Mm 900*450
T-Slots Mm 16*4*95
Table Loading kg 400
X Axis Longitudinal Travel mm 800
Y Axis cross Travel Mm 500
Z Axis Vertical Travel Mm 500
Spindle Center to Table Surface Mm 120~620
Spindle Center to column Surface Mm 500
Door opening Width Mm 900
Spindle Taper(Standard/Option) BT40
Spindle Speed Rpm 8000(belt)/10000,12000
Rapid Feed Rate M/min 36/36/30(Linear x.y.z)
Cutting Feed Rate Mm/min 5-10000
Spindle motor(Standard/option) HP 10
3 Axes Motor(X/Y/Z) kw 1.5/1.5/2
Auto Tool changer(Standard/option) 16/24
Power Requirement kw 25
Air Pressure KGS/CM² 6
Cooling Motor HP 4/3
Cooling Tank Capacity L 120
Machine Weight kg 3900
Machine Size(L*W*H) mm 2200*2200*2260
Controller FANUC/MITSUBISHI.
To get perfect cutting results, Lasermak frame and components are specially machined in CNC machining centers with maximum precision. Lasermak is equipped with linear motors which is an optional specification in most cases for other brands. The axis, moving along with strong magnets mounted on the frame, provide high speed and maximum acceleration. (Y axis 3G). This high speed and acceleration enables your company to increase efficiency and productivity while also decreasing operational costs.
Frame and bridge are assembled by expert engineers and tested with latest high-tech measuring technology in every phase of manufacturing process. This is the main reason of the perfectness in square and circular cutting. There is no need for a second operation and Lasermak produces parts ready for assemble.
* 60% - 100% faster compared to other laser cutting machines. Axes equipped with Bosch - Rexroth linear motors and drivers reach to 120 m/min. speed and accelerations are 2 G on Y, 1,5 G on X axes
* Cuts thin materials 3 times faster compared to Co2 lasers and energy consumption is simultaneously lower
* 70% energy save by fiber optic laser technolohy is plant friendly.
* There is no need for laser-mix gas which is used Co2 laser cutting machines as there is diode technology is used for Fibermak.
* There is no need for optical components like beam path, folding mirror and quartz tube etc. as laser transmitting is done by fiber cable
* You can make production 24 hours a day and may save 50% per each costs
* You can prevent from production faults by automation in your premises
* You save from moulds and apparatuses.
* You may cut aluminium, copper, brass and other reflecting materials precisely with smooth surface quality. (You may reflecting materials such as aluminium, copper, brass, etc. Precisely and by smooth surface quality)
* FIBERMAK has strong frame, equipped with worldwide well known, quality and long life, quality components and designed to work accurately and continously even at hard conditions.
* Fast and high quantity production capacitated ERMAKSAN reflects this advantage as price to its customers. Creative designs with always highest level technology and quality are the main principles.
EFFICIENT
High cutting speeds with integrated distance sensorShort Conversation times with fast hanging of focal lenghtsOptimized cutting gas flow FLEXIBLE
Cutting of different material thicknesses2D cuttingFocal lenght tailored to your applicationAll media connections located in upper part USER FRIENDLY & SAFE
Simple and safe cartdridge replacement system with TCP retentionSast change of protective glassMotorized focal position adjustment (optional)Temperature monitoring of the sensor insertCartdridge monitoring for presenceMagnetic breakaway coupling
POWER AUTOMATION CONTROLLER
Power Automation CNC control with integrated inputs and outputs
The open, browser-based human machine interface PA HMIThe PA 8000 LW CNCThe Pa dongle which includes all needed software functions for fiber cuttingThe I/O module PAMIO which provides 4 analog in - and outputs
152 Cnc Machines Spare Parts Suppliers
Short on time? Let Cnc Machines Spare Parts sellers contact you.