The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm
Chemical Composition
Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
2407 Expanded Metal Mesh Suppliers
Short on time? Let Expanded Metal Mesh sellers contact you.
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces.
Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%.
The max weight of each pieces is up to 1 ton.
The material can be loaded loose in 20 heavy duty container.
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires.
Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants.
We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test.
The material can be loaded loose in 40 HC container.
For further details, please feel free to contact us.
We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry.
The level of Fe% in the slag has been estimated by water displacement test.
This material con offer competitive advantages respect other metal scraps:
Price;
Stable Chemistry;
The material can be loaded loose in 20 heavy duty container.
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
:
1. >85% Fe Average 600mm Max Fraction
2. >78% Fe Average 20-300mm Fraction
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills.
It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color.
Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating.
From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list
In particular the mill scale can be classified as follows:
Einecs (european commission no.): 266-007-8
Waste code: 10 02 10
Basel code: b 12 30
Hs code: 2619.00
These cast iron skulls are a by-product derived from the cast iron foundries. The byproduct is a ferrous by-product which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes.
The material is separated by magnet and screener.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
The Bard Ventralex Hernia Patch with Strap is a medical device used for hernia repair. Bard, now a part of BD (Becton, Dickinson and Company), is a well-known company that produces a variety of medical devices, including products for hernia repair.
Here are some general features and considerations for the Bard Ventralex Hernia Patch with Strap:
Hernia Repair: The device is designed for use in hernia repair surgeries. Hernias occur when an organ or tissue protrudes through a weak spot in the surrounding muscle or connective tissue.
Mesh Material: The hernia patch typically consists of a mesh material. Meshes used in hernia repair are often made of synthetic materials like polypropylene.
Strap: The strap component is an additional feature that may be designed to help secure the mesh in place during the surgical procedure.
Placement: Surgeons use the hernia patch to reinforce the weakened area of the abdominal wall, reducing the risk of hernia recurrence.
Minimally Invasive Techniques: In some cases, the hernia patch may be used in minimally invasive or laparoscopic hernia repair procedures.
The Bard PerFix Light Plug is a medical device used in hernia repair. Bard is a well-known manufacturer of medical devices, and their hernia repair products include mesh implants designed to reinforce and support weakened or damaged tissue in the abdominal wall.
Key features and considerations for the Bard PerFix Light Plug may include:
Hernia Repair: The PerFix Light Plug is specifically designed for use in hernia repair procedures. Hernias occur when organs or tissues protrude through a weak spot in the surrounding muscle or connective tissue.
Mesh Material: The product is likely made of a mesh material. Meshes used in hernia repair are often constructed from synthetic materials, such as polypropylene.
Plug Design: The term "plug" suggests that the device is designed to fill or cover a defect in the abdominal wall associated with a hernia.
Lightweight Design: The inclusion of "Light" in the product name may indicate that the mesh is designed to be lightweight while still providing effective support.
Surgical Technique: The PerFix Light Plug is used by surgeons during hernia repair procedures to reinforce the tissue and reduce the risk of hernia recurrence.
Bard is a well-known manufacturer of medical devices, including products for hernia repair. Meshes are commonly used in hernia repair procedures to provide support and reinforcement to weakened or damaged tissue in the abdominal wall.
Here are some general considerations:
Anatomical Design: The term "ANATOMICAL MESH" suggests that the mesh is designed to fit anatomical contours, potentially allowing for better conformity to the patient's anatomy during hernia repair.
3DMAX MID: This part of the name may refer to specific design features or characteristics of the mesh. For example, "3DMAX" might imply a three-dimensional design for optimal support.
Mesh Material: Hernia repair meshes are typically made of synthetic materials, such as polypropylene, which is known for its durability and biocompatibility.
Surgical Technique: The mesh is used by surgeons during hernia repair procedures to reinforce and support the abdominal wall, reducing the risk of hernia recurrence.
