Polyurethane Windshield Adhesive is a component, moisture curing polyurethane based adhesive for direct glazing in Automotive Glass Replacement.
One component formulation
Good non-sag properties
Short cut-off string
Cold application
Fast curing â?? Rapid strength development
High mechanical performance
High Modulus
High initial bond strength
Can be overpainted
Akfix G400 is a two component marble and natural stone adhesive based on polyester resin.
Resistant to UV
Resistant to alkalis and diluted acid solutions
Temperature resistance of cured adhesive is between -10 C and +100 C
Bonded surfaces are ready to be used after 2 hours
No color change, cracking or shrinkage during hardening period
An adhesive set which consists of high viscosity cyanoacrylate adhesive and activator.
High bonding strength.
Suitable for use on vertical surfaces as it will not drip or slump.
It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.
One-component, fast curing liquid polyurethane adhesive. It possesses high water resistance and bonding strength.
Fast curing.
Low press time.
Transparent.
Extremely high bond strength on numerous substrates.
Conforms to D4 according to DIN EN 204.
Easy to use.
Very good resistance to chemicals.
Excellent resistance to moisture and weather conditions.
Nonshrinking.
Low odour.
Useable in slightly wet substrates.
* Convenient for all drywall joint repairing, filing and finishing works
* Easier to apply and sand due to less weight (up to 25%)
* Minimizes coats over corner bead thanks to less shrinkage
* Net weight: 17L
* Color: white powder
* Drying time: 12-24 hours
189 Glues Adhesives Suppliers
Short on time? Let Glues Adhesives sellers contact you.
Epoxy resin based, solvent free, two component, thixotropic mounting and bonding mortar.
Application Areas:
In adhering the EKAFLEX dilatation band. When assembling and adhering all kinds of metal parts to concrete or steel parts. In all kinds of structural concrete repair. In all types of iron ores. In the placement of anchor elements. Concrete crack repair and insulation. In the bonding of ceramic, granite and marble plates. Bonding of the surfaces such as concrete, stone, metal, wood to each other and used between them.
Advantages: It cures quickly and it allows loading in a short time. Solvent free. It is suitable for indoor and outdoor use. High adhesion performance, bonds to many different. surfaces such as concrete, steel, metal, wood, stone, ceramic and granite. It is thixotropic and does not sag in vertical and overhead applications such as walls and ceilings. Composition A and B are in different colors and the formation of homogeneous mixture can be visually monitored. Water impermeable - It can stick even on moist surfaces. High mechanical endurance.
Preparation of Mixture: EKAFIX has two components. Component A (3.75kg) and Component B (1.25kg) is mixed in low speed (400-600 dv / min) mixer until it becomes a homogeneous mixture.
EKAFLEX Band application:
EKAFLEX dilatation tapes are applied on both sides with a trowel or
spatula with a 1.5 mm thickness and a 40 mm wide strip of EKAFIX.
After EKAFLEX is poured, the same procedure is applied on top of the
band and the adhesive should not be exposed to mechanical stress
until fully dry. Do not affix EKAFLEX dilatation band joints with EKAFIX
epoxy adhesive. The joints must be glued with hot air supply.
The adhesive used in the cementation process of ceramic, granite, and
marble is applied on the surface by using a notched trowel. The piece
should be slightly glided during the placement and should get into the
final position in 30 minutes.
In general-purpose cementing, the adhesive should be applied on both
surfaces and materials should not be moved after being pressed
together until the adhesive dries.
It is two-component, elastomeric system, 100% solvent free and 100% solid material. The product is aromatic and very resistant against weathering aging (excluding optical discoloration that occurs by time). Applied product gives seamless monolith surface. High UV resistance. It does not flat joints and grouts as it takes the shape of the surface.Product Advantages
It includes all features of water-proofing, anti-rust and last coat of paint
It is applied very fast (one labor / 1 hour / 250 m²)
It is used as a thin layer (2-3 mm)
Curing time is 40 seconds
Surface is seamless and compact
It is very resistant to abrasion
Excellent chemical resistance to the wide range of common chemicals
Coating of any thickness is done in one shot - no need for stratified application
It can be applied on all construction materials.
Application temperature range is very wide (0-80 ° C)and even It can be applied when air humidity is 100%
Necessary condition is that the dew point is above surround temperature
It has an excellent thermal shock resistance (-40°C - +200 °C)
Surface can be put in exploitation 24 hours after application.
It is long-lasting (approximately 25 - 50 years).
Drum melters models dm 200 and dm 20 to process any kind of hot melts – even pur and uv curable – further to a wide range of butyls, glues and polymers with working temperatures up to 240°c in 200 lt- (or 55 gallons) and 20 lt- (or 5 gallons) tanks.
Equipped with high precision gear pumps, the system ensures top precision in all conditions of use, both for continuous and intermittent applications.
The special design and high-tech materials enable an excellent anti-sticky control and avoid any adhesive deterioration, particularly while using pur adhesives.
The wide range of continuous output melting units model mitsu enables to process any kind of hot melt adhesives in blocks or chips with working temperatures up to 240°c, including reactive pur and uv-curable ones.
The melting rate varies from 2.5 to 160 kg/h, according to different models, giving an appropriate answer to all high, medium and low melting requirements.
This modular system enables to conform to different production needs thanks to partial use function and possibility to integrate later on the melting capacity.
Unique range of single sided self-adhesive tapes for splicing surface treated release/casting papers as used in the manufacture of synthetic leather. The system consists of:
For pu and pvc casting papers use:
Top splice
The tapes available for the top splice have a special release coat on the tape surface which ensures easy removal of the synthetic leather from the splice.
Back splice
A choice of 3 paper based tapes with very specific properties and easy to apply. Recommended for both pu and pvc release papers.
Slipping : 0,5 mm
Density : 1450 ± 100 kg/m³
Open time : 30 min
Application. Temperature : +5 Cº / +35Cº
Bonding Strenght : 0,50 N/m²
Grouting Appl. Time : 48 hours later.
Italian Company sells 1K PU-Acrylate glossy/semi-glossy/matt/super matt lacquer, odorless with very low VOC content. It has a high solid content which provide the wood a warm light tone. Suggested for treatment of wooden floors in homes and other areas subject to normal wear. Fully compliant with VOC 2010 legislation.
Italian company sells two-component polyurethane varnish (1:1). Glossy, elastic, hard-wearing and scratch-resistant. Particularly recommended for varnishing traditional parquet of all wood types. Resistant to washing with water and neutral detergents. Duro lack mc 50 gives an even finish.
Italian company sells single-component oil-based urethane glossy/semi-glossy/matt/super matt/coloured finish for varnishing wooden floors. Excellent surface finish with waxed/oiled effect. Ideal for flamed woods.
Italian company sells 2k water-based pu glossy/semi-glossy/matt/super matt lacquer, odorless with very low voc content. It has a high solid content and provides the wood a warm light tone. Suggested for treatment of wooden floors in commercial premises or wherever a high resistance to wear is required. Total resistance to the ôblack heel markö.
