We can produce kinds of embroidery machines , and produce as you need .
If you were interested in our products , please contact us , we shill give you more information .
Service@mayaemb.Com
Features
Integrate computerized quilting and embroidery
Automatic color change, arbitrary head for quilting and embroidery
Continuous quilting of independent pattern, skip quilting function
Unlimited and continuous quilting and embroidery in y direction, front and rear automatic tensioning systems
3.5 inch floppy disk generally used for common embroidery machine, support usb flash memory, readable tajima, barudan, zks, swf embroidery format.
Independent presser foot operation to make the product have three-dimensional aesthetics
Rolling shaft design in y direction, cloth can be continuously sewn or quilted
Simple, convenient and feasible operation
Rotating speed control, power-off protection, power-off memory function
Broken line detection, rollback quilting and embroidery
Advance and retreat function at a high or low speed
Trimming system, trimming length control. Line drawing concentration system, stability and reliability
Operation Mechanism
The control mechanism can make the machine fix rhinestones on the material by using Power Transducer, Ultrasonic generator and Vacuum generator. Positioning the red/ infrared light spot on the right point manually, ultrasonic will come out automatically and produces a high frequency vibration over the rhinestones and then is transformed to the heat energy instantly. Therefore the rhinestone is fixed on the material surface permanently.
Stone diameter available: Size 6#-30# (diameter 2mm-6mm)Glass Octagon Stone, Aluminum Octagon Stone, Round Aluminum Stone & Plastic Piece with Adhesive.
Main Features:
l Humanized large screen Chinese/English display
l Safe operation, no damaging to the material
l SANWO cylinder made in Korea
l ARK Two-position Three-way Solenoid valves made in Korea
l CKD Direct Solenoid made in Japan
l Accurate infrared positioning
l Heating system: Ultrasonic without press again
l Environment protection and noiseless; Low power consumption, smaller size
l High efficient production with 24 hours operation
l Suitable for both thin & thick fabrics.
l Instruction book: Chinese, English, Arabic.
Technical Data:
l Max Speed: 130-150 pcs/min (more than 5 workers with manual way)
l Power Supply : 220V / 50HZ, 110V/60HZ
l Gas power: 0.3-0.5MPA
l Air Pressure : 5-6kg/cm
l Ultrasonic Power: 200W
l Ultrasonic Frequency : 28KHz
l Static Capacitance: 2300-2700PF
l Five size air nozzle for various size rhinestones:
6#(¦µ1mm),10#(¦µ1.5mm),16#(¦µ2mm),20#(¦µ2.5mm),30#(¦µ3.5mm)
l Double head working table size: 1100*800mm, single head:400*350mm
l Color available: blue & green & white available
l Double head :Gross/Net Weight : 85KG /65K
l Single head: Gross/Net Weight:66KG/56KG
l Wooden package size:Double head: 0.81*0.655*1.13m, 0.6CBM; single head: 0.67*0.67*1.13m,0.51CBM
l Warranty: electricity system parts for 1 year ,air system half year
l
Packing:Carton / wooden packing with desiccant material. Wooden case is under Fumigation, ventilation treatment available.
Wooden case is under fumigation, ventilation treatment and with desiccant material available
Application Industry:
caps, hats, T-shirts ,sweaters, ready-made garment, Shoes embroidery, fabric flat embroidery;
Can do Cording, Chenille, Sequin , Boring embroidery by installing the optional devices
Main Features:
Suitable for flat bed embroidery, cap embroidery and finished garments embroidery
Embroidery area: 400 x 450 mm/15.7" x 17.7"
Auto thread cutting & color changing
270¡ã wide cap frame unit
5" color LCD display showing real time stitching
DAHAO computer with USB port
Japanese Rotary hook, bobbin & bobbin case
Thread break detection
Pre-Sew Design Trace capable
Start, Stop, and Emergency Stop
On-board lettering
Speed: 200-850RPM
Memory size: 1 million stitches. Max 2 million
Stitch Length: 0.1~12.7mm
Storage: 99 embroidery designs
Electricity: 110V/60Hz or 220V/50Hz available
Power consumption: 0.8kw/1.0kw/1.5kw
Hoops/frames included:
2 x Shirt Front Round Hoop 9 cm (3.5")
2 x Shirt Front Round Hoop 12 cm (4.7")
2 x Shirt Front Round Hoop 15 cm (5.9")
2 x Shirt Front Round Hoop 18cm (7.1")
2 x Shirt Front Round Hoop 22cm (8.7")
2 x Jacket Back Square Hoop 29 x 29 cm (12" x 12")
Cap attachment included:
2 x cap rings per head that snap into cap station for preparation then embroidery.
1 xhoop station per machine for easy snap in and snap out preparations of caps.
1 x cap driver per head that snaps into embroidery machine¡¯s bracket holder for hoops.
(Single Head Computerized Cap, T-shirt, Flat Embroidery Machine)
Flat embroidery area :450*350mm;
Cap embroidery:270¡ã;
T-shirt embroidery area: 450*290mm;
Speed :200-850RPM;
Stitch Length:0.1--12.7mm;
Memory :1 million stitches. Max 2 million;
Total Machine package size:1.0 CBM;
Total Gross Weight :160KGS;
Memery Format :read files in Tajima(DST);
Input:USB port £»
Power Source :Single Phase: 110V/60Hz or 220V/50Hz available ;
Power Consumption :0.5-1KW ;
Warranty: one year (we give you good quality parts for machine. so it is not easy to be broken for them.
we will send you new spare parts for free if any broken; online service of solving your trouble if any,
solve ways for the common questions on the User's Instruction Book);
Specification :
Dahao computer system ;
3.8" color LCD monitor with USB port;
with automatical thread cutting and color changing;
Motor :Brushless DC Motors, BLDC.
Portable table and stand with wheels for easy moving around;
standard spare parts and accessories,
Tool kit;
wooden /carton package.
Cap attachment included:
2 x cap rings per head that snap into cap station for preparation then embroidery.
1 xhoop station per machine for easy snap in and snap out preparations of caps.
1 x cap driver per head that snaps into embroidery machine¡¯s bracket holder for hoops.
Hoops/frames included:
¡ñ 2 x Shirt Front Round Hoop 9 cm (3.5")
¡ñ 2 x Shirt Front Round Hoop 12 cm (4.7")
¡ñ 2 x Shirt Front Round Hoop 15 cm (5.9")
¡ñ 2 x Shirt Front Round Hoop 20 cm (7.87")
¡ñ 2 x Jacket Back Square Hoop 29 x 29 cm (11.4" x 11.4")
¡ñ 2 x Jacket Back Square Hoop 45.5cm x 29.5cm (18" x 12")
¡ñ 1 x Flat-bed Sash frame
Operation: English, Spanish, Portuguese, Turkish, Chinese available on the Display Screen; ENGLISH Users¡¯ Manual E-Book to show how to use it.
Application£ºcan do logo, letter and other designs embroidery on Cap/hat, Cloth,Finished garments, bedspread, curtain etc.
Lead Time :within 15 days for 2 sets, within 20 days for 5 sets after confirming the down payment
Series RPED-MC Series RPED-CS Series
Specifications 1-3heads, 4-8heads, 9-13heads, 1-15heads
Computer 10.4 inch LCD Touch Screen
Main shaft driving Servo motor
Frame driving Stepping motor , Servo motor
Minimum head distance 550mm 330mm
Max Speed for flat embroidery 1000RPM 850RPM 850RPM none
Max Speed for Chenille embroidery Max.ú¦Flat embroidery 1000rpm,chenille embroidery 600rpm, chainstitch embroidery 600rpm Max.: Chenille embroidery 600rpm, chainstitch embroidery 600rpm
Colors for the Chenille Embroidery 6colors
Options sequin device, cording device, auto-oiling device, laser cutting device and boring device are for options none
Number of head 24
Number of needles 4
Quilting embroidery area(mm) X direction:135/270mm
Y direction:Unlimited
Whole width in X direction:3240
Quilting speed Max speed 850RPM
Length of stitch 0.15-12.4mm
Stitch storage 13millon stitches
Pattern storage 200 patterns
Power supply Three-phase 380V 50Hz
Power 4.5-5KW
Control 5inch Keypad LCD screen
Frame driving :Stepping Motor
Embroidery area :350x350mm
Max Speed :70-80 beads/min
Ultrasonic power :450W
Ultrasonic frequency :35KHZ
Static capacitance :2700-3100PF
* 1~36head flat type embroidery machine
* Single/double 3/5/7mm sequin machine
* Chennile towel/chainstitch machine
* Cording machine
* Cap & madeup garment machine,creative cap type can rotate 360"
* Embroider on caps/made-up garment
* Sock embroidery machine
* Quilting embroidery machine
* Creative new roping & belt device can be installed on flat head.
Main features & functions
Low noise:
Due to the high mechanization system inside the coiling heads, it ensures the machine running with high speed & low noise.
Alternate embroidery type heads change:
It enables to select pure flat embroidery or pure coiling heads embroidery automatically with high efficiency; choose the embroidery style easily as you will.
Independent zigzag device:
The sewing distance (1mm~16mm) can be set up by the operation panel through the independent zigzag device which can set up the suitable stitch length & speed for different coiling materials to ensure the high embroidery quality.
Select automatically:
Different embroidery stitch such as taping, flat, zigzag, cording etc. Can be set up by the operation panel.
Easy changing coiling feeding devices:
Different type of feeding device on the coiling heads can be changed easily by hand.
Adjustment of pin distance:
In the operation panel, the pin distance according to different coiling materials can be set up easily (max. 8mm); the lower dead point can be set up easily the same with the max. Distance of 3 mm.
Automatic stitch data creation of zigzag stitch:
The 6 types of zigzag stitches can be processed in flat embroidery stitch data, so it is easy to create zigzag stitch data.
Specifications 1-3heads 4-8heads 9-13heads
Computer 10.4 inch lcd touch screen
Main shaft driving servo motor
Frame driving stepping motor servo motor servo motor
Minimum head distance 550mm
Max speed for flat embroidery 1000rpm 850rpm 850rpm
Max speed for cording &taping embroidery 650rpm
Max speed for zigzag embroidery 450rpm
Options sequin device, looping device, laser cutting device and boring device are for options
Preceding the color change manually or automatically according to computer settings (max. Set-up is 99times).
Feedback control function
Make the needle & presser hoopí»s movement more precisely & up to the most stable embroidery effect.
Low noise design:
Most mechanical parts are adopting mini model motors, which combines with high electronic technique & realizes the low noise expectation.
Automatic raising function:
Needle & fabric presser shaft will be up 27mm automatically after embroidery finishing, which ensure the easy operation of changing frames.
Alternate embroidery type machine change
It is very efficient to just select flat embroidery or chenille embroidery, without changing embroidery machines you can realize which embroidery you want to do.
Automatic chenille & chain stitch change:
Automatic chenille & chain stitch change can be set up by the operation panel to choose manual change or automatic change (can set up 99 times).
Automatic chenille needle stitch height adjustment
According to the embroidery design, can make 10 specifications of height of the chenille stitch manually or automatically, which can realize the different chenille embroidery effects.
Mixed embroidery function
Can make automatic change between flat heads & chenille heads during mixed embroidery design working process, make it easy to do mixed type embroidery job.
Stitch length: 0.1~12.7 mm.
Multi-purpose embroidery machine
The scope of machine use are variety such as t-shirt, sweaters, tubular working clothes and caps as well as normal flat material working
Power failure protection function:
When unexpected power failure occurred, it can search for the suspension soot and make a continue operation.
Scale up/down
Scale the designs down to 505 or up to 200% in the increments of 1%;
Rotating is by 1-degree increments.
Frame back/forward
Frame back/forward is available in units of stitches, color change or designated stitch count.
Adjustable pressure foot, can adjust the different working according to different depth of the material
Head selection
Rigid stand structure, double beam stand for the model above 12heads, advanced vibration-preventive pad and improved auto-lubricating system make the embroidery more reliable, stable and less trouble when high speed working, meantime enhance the life span of the machine;
Machine frame driving in x-axis with traverse system for the model above 8heads, y-axis in linear guide rail driving, plus imported ac servo motor for frame driving
New development on the frame driving: x and y axis adopting homo-cogwheel and rack and belt system plus the imported ac servo motor for frame driving, which revolutionarily changed the frame driving system
Max speed:2-10heads: 1200rpm; 12-15heads: 1100rpm; 16-20heads: 1000rpm
New type individual tension base with threading tubes, which can reduce the friction with the thread during high speed running.
Technical Data
1.Sequin size available: 3mm\4mm\5mm\6.75mm\9mm(Device with special sequin size can be made according to requirement)
2.Attaching space needed: 55mm
3.Current: 0.5A\1A(Optional)
4.It can embroidery cap-shaped sequin, off-centre sequin, cube shape sequin, rhombus shape sequin and flower-shape sequin etc .
Feature:
1.The one-way guide straight to cutter makes the embroidery more stable and fluent
2. It is easy for sequin feeding without using any tools
3. It is easy for sequin shifting by only changing the sequin guide.
Technical Data:
1.Sequin size available: 3mm\4mm\5mm\6.75mm\9mm()Device with special sequin size can be made according to requirement)
2. Attaching space needed: 75mm
3.Current: 0.5A\1A(Optional)
4.It can embroidery cap-shaped sequin, off-centre sequin, cube shape sequin, rhombus shape sequin and flower-shape sequin etc.
Feature:
1. The one-way guide straight to cutter makes the embroidery more stable and fluent
2.It is easy for sequin feeding without using any tools
3.It is easy for sequin shifting by only changing the sequin guide.
206 Embroidery Machine Suppliers
Short on time? Let Embroidery Machine sellers contact you.
