Find Verified Laboratory Equipments Instruments Suppliers, Manufacturers and Wholesalers

Green eoyes eop1280p digital carrier

To offer more better products and service, wuhan eoyes science & technology co., ltd has been built with excellent technical staff from the green cyber science & technology co., ltd.The new company is specializing in eop digital carrierú¼laser minilab and micro projectorú¼including research, manufacture, sales and service.

Nowú¼new eop products have been improved more better, such as more stable light source, more easier operating.The new software has been completing.It makes automatic adjusting colors and management.You will use the new software soon

To meet your requirements, please send me your advice including your model and machine's serial number of eopú¼minilab. We will be pleasure. I will offer you the new software as soon as possibleú¼if we receive your feedback.

The green eop1280plus digital carrier use the epson1.3inch lcd, which the physical resolution is 1032*780, the photo resolution reach to 4128*3120 after using the micro-movement pixel multiplexing technology of lcd. The max print size is 8*12inch and the lcd exposure time is less than 4sec(4r). The print more than 600 prints (4r) per hour, and more than 300 prints (8r) per hour.
Suitable minilab:
Noritsu:1201, 1401, 1501, 1701, 1912, 2211, 2301, 2600, 2611, etc
Fuji:232, 238, 248, 250, 258, 270, 278, 290, 298, 540/541, etc
Konica:801, 808, 808-gold, 828, 838, 858, 868, 878, etc
Agfa:232, msc101
Gretag:740, 740plus
Doli:2000, 2000b, 2000c, 2000s, 2000kj, 2102, 2105
Tds:1218, 1218d, 1218s, 1218pro, 2301, 2024, 2024d, 2030, 2030pro
Other types:based on customer demand

Product Introduction
WFLC-VI Portable Waveform Recorder is a portable device based on the structure of an industrial portable computer. It takes high-performance DSP high-precision ADC chip and embedded operating system as hardware and software architecture and integrates data acquisition processing transmission storage analysis and other functions as one.

DSP acquisition chip for data acquisition and calculation so as to achieve full digital analog signal filtering flexible and diverse sampling frequency from 10K /s 20K /s 50k/s 100K /s can be selected by users can be used for transient electrical signal waveform recording and analysis.

With advanced industrial control kernel and embedded operating system users can easily carry out data storage backup analysis output and other operationsã??

WFLC-VI portable waveform recorder is a collection of fault wave record generator characteristic test and other functions in the integration of intelligent instrument with its small size strong function scope of application is wide flexible configuration and many other advantages favored by the masses of users is a power utility workers standing it will be for the electric power industry production and technological progress to make due contributions.

Product Introduction
Designed for automatic testing of protective and metrological CT/PT suitable for laboratory and field testing.

The product namesï¼?PT volt-ampere characteristic tester transformer volt-ampere characteristic integrated tester CT voltage-current characteristic integrated tester CT voltage-current characteristic tester PT volt-ampere characteristic tester transformer volt-ampere characteristic tester volt-ampere characteristics of variable polarity than integrated tester volt-ampere characteristic tester volt-ampere characteristics integrated tester volt-ampere characteristic tester features comprehensive tester

TKDL-II live cable identification instrument is used to identify A particular cable in the power cable setting migration maintenance and fault treatment to identify A cable in the cable. It has the characteristics of accurate fast simple operation and wide application. It is an indispensable testing instrument in cable construction and maintenance. The electric/uncharged cable recognition device USES single-chip microcomputer technology to encode and power the transmitting signal at the transmitting end which drives the large calibre calipers to coupling the signal to the live cable. The single chip in the receiver decodes and phase the received phase encoding signal. The target cable is identified from a large bundle of other cables based on the uniqueness of the signal phase characteristics on the target cable. It is a light compact compact lithium battery powered portable instrument. Suitable for all kinds of high and low voltage power cables.



1. Charged identification and un-charged identification function combined not only for identification and judgment of cable outage but also for the identification and judgment of live cables the operation is extremely simple very easy to use.

2. The instrument lithium battery-powered you can work continuously for 3 to 5 hours suitable for field use of passive field.

ZSQ-T200 Online Surface Quality Inspection System for Continuously Cast Product (CCD)



Overview

The surface quality inspection of high temperature cast product is of great significance to the repair of cast product s defects and the hot delivery of hot cast product. The ZSQ-T series of online surface quality inspection equipment for casting billets developed can detect the defects such as scratches, cracks, holes, pits, edge cracks, edge defects on the surface of the cast products, and meet the customer's requirements for the quality inspection of the surface of the cast product.



The principle of the system

The ZSQ-T200 online surface quality inspection system for continuously cast products adopts the principle of optical imaging and uses a CCD image sensor to input the surface image of the cast products to be detected into the computer, and then the obtained image is processed by special image processing software to find out whether there is any defect in the image. After the defects in the image are obtained, the obtained defects are classified through a special self-learning system, and finally the requirements of the computer to automatically identify the surface defects of the cast products are achieved.



The composition of the system

1. Optical part: The optical part is composed of multiple fixed-focus lenses and linear CCD, which mainly realizes scanning and imaging of the surface of the cast products.

2. Lighting part: The lighting part is composed of a high-brightness LED array and a cylindrical lens, which realizes high-brightness and high-uniformity lighting on the surface of the cast products.

3. Mechanical structure part: The mechanical structure part mainly realizes the adjustment, installation and fixing of the optical part and the lighting part, and consists of the imaging head (optical part), light box (lighting part), bracket and control cabinet. The structure is required to be stable and reliable.

4. Real-time processing: The real-time processing part is completed by the multi-CCD data real-time sampling processing unit (high-speed DSP) independently developed

5. Hardware part: The hardware part consists of high-speed storage controller and storage hard disk array, Gigabit InternetMAC controller, Gigabit Ethernet PHY. Rj45, and multiple high-speed workstations.

6. Detection software: The detection software mainly realizes the functions of collection, storage, transmission, processing of CCD scanning images, extraction of defects, analysis of defect characteristics, calculation of defect size and position, storage of defect images, generation of cast products surface quality analysis reports. etc.

Product description

Automatic tension tester Intermolecular Forces formed liquid surface tension.Numbers of tension reflect on liquid sample s physics and chemical properties, it is one of the most important index to product quality. automatic interfacial tension tester apply to GB/T6541,it can test kinds of liquid surface tension and boundary surface tesion.this method sample and accuracy,so it s used widely.



Specifications

Product description
Oil dielectric loss tester is a high-precision instrument, which can be applied to measure dielectric loss angle and Volume Resistivity of insulating oil etc. It is integrated by oil cup for dielectric loss, temperature-control equipment, temperature sensor, test-bridge for dielectric loss, AC trial electrical source, standard capacitor, high resistance meter and DC high-voltage power etc. The most advanced heating mode of high frequency induction is applied to the heating part of this instrument, which has the advantage of non-contact of oil cup and heating unit, homogeneous heating, quick velocity and convenient control etc.


Technical index

Oil cup technical specifciations:

Distance between High Voltage terminal

and Low Voltage terminal 2mm

Capacitance of Empty Cup 602PF

The Highest testing voltage Industrial Frequency 2000V

Dielectric Loss of Empty Cup tg1 10-4

Liquid capacity About 40ml

Electrode Material Stainless Steel

Volume 70mm(D) 120mm


1

Condition of Uss

2

Power Source

AC 110V10% Without Frequency Limit

3

AC High Voltage Output

4

DC High Voltage Output

Temperature Control Induction Stove

Maximal Power 500W

6

Temperature Control Range

Transformer oil acid tester is a fully automatic measuring instrument which adopts the extraction method to accurately detect the insulating oil acid value. This instrument can improve the working efficiency and test accuracy, and at the same time ensure the safety of the body by reducing the operator's contact with the samples and reagents.

The acid value is the trace value of potassium sulfate that neutralizes the petroleum acid in 1g of oil, which contains a certain amount of inorganic acid and inorganic acid. The acid value includes organic and inorganic acids contained in the oil. In most cases, oil does not contain mineral acids. Therefore, the oleic acid value actually represents the content of organic acids in the oil. The organic acid contained in the new oil is mainly cyclonic acid. In the oil and in the process of use, the acid value of the oil produced by oxidation is an indicator to measure the degree of refining of the new oil. Whether the oil is running is an important indicator of the continued use of oil quality equipment.



2. Technical index:

1.Test range: 0.002 1mg KOH/g

2.Test error: 0.005mg KOH/g

3.Repeatability: 0.005mg KOH/g

4.Ambient temperature: 10 45

5.Relative humidity(RH): 85%RH

6.Voltage supply: AC220V/50Hz

7.Power: 50W

Product description

This instrument absorbs the advanced technology of similar products at home and abroad, and can set up various parameters through the keyboard. This machine has a power down protection, over temperature protection, "0" C protection and gas protection, automatic electronic ignition, etc. it has the characteristics of stable and reliable performance, simple and reasonable structure, simple operation, high expansibility, etc.



Technical index

Temperature control

Chromatographic column chamber temperature

1 Temperature control range: room temperature (Set the temperature increment 1)

2 The precision of temperature control: It is0.1, which is below 200

SPD-V010 Handheld Roll Gap Checker


Overview



The handheld roll gap checker is specially used to measure the length between spherical surface, arc surface and plane (or spherical surface). It is specially suitable for the opening adjustment of the roll gap of the metallurgical continuous casters in various specifications, because the roll gap checker has the advantages of high resolution, accurate measurement, stable data and easy to use. Because the opening accuracy of the roll gap checker will directly affect the quality of the casting block, this roll gap checker is an indispensable testing equipment in the continuous casting equipment, which can fully meet the needs of on-site installation testing and use process verification. When the hand-held roll gap meter smoothly passes through the gap between the guide rolls of the continuous casting machine, the upper measuring contact of the hand-held roll gap checker contacts the inner arc roll and the lower measuring contact touches the outer arc roll. The handheld roll gap checker is used in perpendicular to the roll diameter direction, during the pushing process, when the hand-held roll gap meter is in the tangent plane of the upper and lower rolls, the measured value is the smallest at this time, and this value is the roll gap measurement value. The design of the hand-held roll gap gauge ensures that the upper and lower contacts of the roll gap checker can smoothly pass the measured roll along a straight line during measurement.

During the measurement process, the roll gap measuring instrument automatically compares the measured values, and displays the minimum measured value on the instrument display interface, which is the current measured roll gap value.


The technical parameters

1. Measuring range of instrument type handheld roll gap checker: 180mm - 400mm (the range can be customized)

2. Measuring range of digital hand-held roll gap checker: 120mm - 400mm (the range can be customized)

3. Measuring range of hand-held thin slab roll checker : 60mm - 150mm (the range can be customized)

4. Measurement accuracy: 0.01mm

5. Working temperature: 25 85

6. Battery capacity: 5000mAh

7. Charger specification: 12V

LAG-S200 Ladle Slag Detection System (Vibration Type)



Overview

The continuous casting vibration type ladle slag detection device is used to detect the slag content of the ladle nozzle in the steelmaking continuous casting process, so as to improve the cleanliness of the tundish molten steel and obtain the best yield of the ladle molten steel. The device adopts the principle of vibration detection.

The LAG-S200 continuous casting ladle slag automatic detection system after many years of research with many scientific research institutes, and fully combined with the actual situation on site. It has a real field application value as a continuous casting ladle slag automatic detection system.



The meaning of the system

1. Reduce the amount of tundish slag

2. Improve the purity of molten steel

3. Improve the life of the tundish

4. Reduce sliding nozzle erosion

5. Reduce nozzle blockage

6. Increase the number of continuous pouring furnaces

7. Reduce the amount of residual steel in the ladle when high-quality steel is casting

8. Improve the yield of molten steel

9. Improve the quality of continuous casting billets



In order to improve the purity of the molten steel in the tundish, and improve the quality of the casting billet, especially to improve the quality of the billet in the transition section, and reduce the amount of residual steel in the high-quality ladle, and prolong the life of the tundish lining, and increase the number of continuous casting furnaces, necessary to detect and control the slag in the later stage of continuous casting ladle casting.

The Working principle of the system

The LAG-S200 continuous casting ladle slag automatic monitoring system detects the slag state during the pouring process by receiving the vibration signal of the mechanical operating arm of the ladle nozzle. In the process of molten steel pouring, when molten steel flows through the long nozzle and pours into the tundish, the molten steel impacts the wall of the long nozzle and causes the vibration of the mechanical operating arm used to support the long nozzle. Since the specific gravity of the steelmaking slag is less than half of the specific gravity of the molten steel, it floats on the surface of the molten steel, and the steelmaking slag appears when the molten steel is about to be all poured. At this time, due to the high viscosity and poor fluidity of light steelmaking slag, the impact force of the mixed flow of molten steel and steel slag on the wall of the long nozzle is quite different from that of pure molten steel. The system mainly monitors the ladle slag of the continuous casting by measuring and analyzing the vibration difference of the mechanical operating arm.

Mould Online Width Adjustment and Taper Measurement



Overview

In order to meet the needs of producing various specifications of continuously cast products, shorten the time for replacing the mold, and improve the production capacity and production efficiency of the continuous casting machine, the mold online width adjustment system is the key technology for efficient continuous casting. The online mold width adjustment system enables the two narrow sides of the continuous casting slab mold to move inward or outward in small steps until the predetermined width is reached. During the production process, the adjustment of the mold s width can be completed without stopping the machine. Generally, the online width adjustment of the mold needs to be connected with the online taper measurement of the mold. Only with adjustment and detection can the online adjustment range of the mold be accurately controlled.







The components of the system

Workstation: host system, system width adjustment control, taper detection.

On-site operation box: real-time display of the current control status, manual operation to adjust parameters.

Digital Electric Cylinder: Precise digital control of electro-hydraulic drive cylinder, which can achieve high-precision quantitative control.

On-line measurement of taper: Install it on the narrow-face copper plate of the mold, and monitor the taper of the narrow-face copper plate in real time. Cooperate with the detection feedback control of the width adjustment system, so as to achieve high-precision adjustment.





The technical parameters

Adjustable range: 0-1250mm (unilateral)

Control accuracy: 0.02mm/0.05mm/0.1mm

Step resolution: 0.01mm/0.02mm

Running speed: 0-10mm/s

Power: 3.5KWl

16-bit encoder: 65536 pulses

Weight: 25Kg

Shell: high-strength aluminum alloy


The functions of the system

Realize online width adjustment function

Realize the online real-time monitoring function of mold taper

Continuous casting production adjustment and non-stop production

One-key operation in the main control room, automatic completion

High adjustment accuracy and fast speed

The interlock control of the continuous casting steelmaking system can realize automatic steel pouring

Product description

Insulating boots and gloves withstand voltage device is a power frequency power supply with low voltage working voltage of 220V/50Hz for insulating boots and gloves. According to the principle of electromagnetic induction, the input voltage is changed to the minimum value required for the test. high pressure. Insulating boots (gloves) withstand voltage test device generally consists of a special dedicated test box, an intelligent power frequency withstand voltage console, and a power frequency withstand voltage test transformer.

A special water tank can be customized according to needs to test 6-8 insulated boots or 6 insulated gloves at a time, and display the leakage current of the insulated boots or insulated gloves at the same time. The intelligent power frequency withstand voltage console is equipped with overcurrent protection and zero protection. Time protection and alarm function. The preventive voltage resistance test device for insulating boots and gloves is a special product developed and produced according to the needs of users according to the test procedures of insulating boots (gloves).

The selection has an automatic boost (buck) function, automatically reads the leakage current of each test product, the whole process is automatically completed, and the test data is automatically printed, which effectively solves the previous non-standard test methods, thereby simplifying .Simplifies the test procedure and improves the test speed. More reliable identification of parameters such as leakage current and power frequency withstand voltage of insulating boots (gloves). To ensure the safety of test personnel, it is an ideal pre-treatment of insulating boots (gloves) to protect power frequency withstand voltage test equipment.



Technical Parameters

Input voltage AC220V 50 Hz

Output voltage 0~30kV

Capacity 3kVA

Test number 3 pairs each time

Quality Gloves (insulating boots) test car: 80kg; power frequency withstand voltage test bench: 70kg