KDL-II live cable identification instrument is used to identify A particular cable in the power cable setting migration maintenance and fault treatment to identify A cable in the cable. It has the characteristics of accurate fast simple operation and wide application. It is an indispensable testing instrument in cable construction and maintenance. The electric/uncharged cable recognition device USES single-chip microcomputer technology to encode and power the transmitting signal at the transmitting end which drives the large calibre calipers to coupling the signal to the live cable. The single chip in the receiver decodes and phase the received phase encoding signal. The target cable is identified from a large bundle of other cables based on the uniqueness of the signal phase characteristics on the target cable. It is a light compact compact lithium battery powered portable instrument. Suitable for all kinds of high and low voltage power cables.
1. Charged identification and un-charged identification function combined not only for identification and judgment of cable outage but also for the identification and judgment of live cables the operation is extremely simple very easy to use.
2. The instrument lithium battery-powered you can work continuously for 3 to 5 hours suitable for field use of passive field.
1. The software is specially designed for DC system measurement
2. Adopts ARM DSP and 16 bit Flash memory
3. Touch panel simple operation
4. Can store review the testing results or upload data into PC
5. Module structure reliable running and reasonable design
6. Menu operation easy to use
7. Software can be upgraded via U disk
8. Data can be analyzed via DC system comprehensive analysis software installed in PC
9. large LCD display user-friendly interface
10. Full automation once set the parameters it automatically adjust AC voltage load loading resistance measure parameters record testing results and stop measuring
11. Real time on line test record single cell and battery bank voltage
12. RS232 and USB communication interface
13. Powerful data processing function: curve indication report generating accurate calculating
14. Protection function auto stop or manually stop measurement
15. Three phase digital control voltage regulator with high precision high stability
16. Module assembly structure small volume little weight easy for transporting or moving
1. The software is specially designed for DC system measurement
2. Adopts ARM DSP and 16 bit Flash memory
3. Touch panel simple operation
4. Can store review the testing results or upload data into PC
5. Module structure reliable running and reasonable design
6. Menu operation easy to use
7. Software can be upgraded via U disk
8. Data can be analyzed via DC system comprehensive analysis software installed in PC
9. large LCD display user-friendly interface
10. Full automation once set the parameters it automatically adjust AC voltage load loading resistance measure parameters record testing results and stop measuring
11. Real time on line test record single cell and battery bank voltage
12. RS232 and USB communication interface
13. Powerful data processing function: curve indication report generating accurate calculating
14. Protection function auto stop or manually stop measurement
15. Three phase digital control voltage regulator with high precision high stability
16. Module assembly structure small volume little weight easy for transporting or moving
TKDL-II live cable identification instrument is used to identify A particular cable in the power cable setting migration maintenance and fault treatment to identify A cable in the cable. It has the characteristics of accurate fast simple operation and wide application. It is an indispensable testing instrument in cable construction and maintenance. The electric/uncharged cable recognition device USES single-chip microcomputer technology to encode and power the transmitting signal at the transmitting end which drives the large calibre calipers to coupling the signal to the live cable. The single chip in the receiver decodes and phase the received phase encoding signal. The target cable is identified from a large bundle of other cables based on the uniqueness of the signal phase characteristics on the target cable. It is a light compact compact lithium battery powered portable instrument. Suitable for all kinds of high and low voltage power cables.
1. Charged identification and un-charged identification function combined not only for identification and judgment of cable outage but also for the identification and judgment of live cables the operation is extremely simple very easy to use.
2. The instrument lithium battery-powered you can work continuously for 3 to 5 hours suitable for field use of passive field.
Mould Oscillation and Deflection Detection Instrument
Overview
The mold is a device that shapes the cast product in continuous steel casting, and it is also the core equipment and key technology of continuous casting machine. The main function of the mould oscillation deflection detection instrument is to detect the the mould oscillation table s oscillation frequency, amplitude, deflection rate, phase, oscillation trajectory curve, etc. Through the detection and adjustment of the detection instrument, the mold moves along the outer arc of the continuous casting machine according to the given amplitude, frequency and waveform deflection characteristics.
The actual oscillation parameters of the mold oscillation table during the operation and production process and the process parameters of the cast products cannot be effectively known without the data detection of the mold deflection detection instrument, so that the operator cannot adjust the mould s production process parameters in real time according to the real-time situation of the on-site production.
The continuous casting mold deflection detection instrument independently developed by our company is suitable for various molds such as slab, square billet, round billet and shaped billet. The system obtains the process parameters such as actual oscillation holographic parameters and negative slip amount of the oscillation table by effectively detecting the movement of the mold. The technicians can formulate the control strategy of the mould according to these actual parameters, and improve the output and quality of the product within a safe and reliable range.
The structure of the instrument
Continuous casting mold oscillation and deflection detection instrument is mainly composed of sensor system, sensor signal conditioning circuit, power supply circuit, synchronous data acquisition module, communication cable, and software data analysis system.
There are three axial acceleration sensors installed in the mold oscillation and deflection detection instrument, one of which is to detect the vertical oscillation signal (Y axis), and the other two are to detect the horizontal oscillation signal (X and Z axis). The signal obtained by the sensor is processed by the preprocessor and the preprocessing module. The oscillation signal and sensor status signal will be filtered and normalized, sent to the synchronous data collector for digitization and feature extraction, and the data is analyzed and processed by the master computer software to obtain various oscillation parameters and process parameters required by users.
838 Manicure Pedicure Instruments Suppliers
Short on time? Let Manicure Pedicure Instruments sellers contact you.
The taper of the narrow face of the mold has an important influence on the quality of the casting billet. Excessive taper will cause the mold to squeeze the billet shell, and a small taper will increase the air gap. With the continuous increase of the requirements of the casting billets quality and the continuous introduction of high-precision molds, the current taper measuring instrument in the domestic market generally have low measurement accuracy and complex measurement methods, which restrict the development of production.
The new-generation taper measuring instrument developed high-precision inclination sensor, combined with ultra-low power consumption processor, which can quickly and accurately measure the actual taper value of the narrow copper plate of the mold. The instrument is fully functional, easy to use and suitable for slab molds of various lengths.
Most of the current slab molds are single-taper, a narrow flat copper plate. The taper value required for production can be achieved by adjusting the angle between the narrow copper plate and the direction of gravity. The taper measuring instrument directly measures the angle between the narrow copper plate and the direction of gravity. According to habits and production needs, the angle is converted into the value of one-sided shrinkage of the upper and lower ports.
The main features
1. Easy to calibrate, stable performance, easy to operate
2. Self-supporting, self-aligning, self-balancing
3. High measurement accuracy
4. LCD data reading
5. Fast response, real-time display reading
6. Adjustment of dynamic intelligent system
7. Lithium battery power supply, suitable for on-site use of mobile operations
8. The continuous measurement time is more than 36 hours
9. The sensor adopts multiple protections to meet the needs of on-site harsh environment measurement
10. The weight of the whole system is less than 3.8 kg, and it is equipped with a set of zero-point calibration table, which is convenient for on-site installation and measurement
11. Applicable to various arc, parabolic and straight molds
The performance and index
1. Measuring range: 3 3 (measurement length can be customized according to users needs)
2. Measurement accuracy: 0.01mm
3. Temperature range: -25 85
4. Linearity deviation: -0.03mm 0.03 mm
5. The longest usage time after fully charged: 36 hours
6. The longest storage time after fully charged: 2 months
The main components
1. Measuring instrument: central measurement and control unit, measuring sensor
2. Measuring stand
3. Standard table: standard surface, support frame, spirit level
Product description
Partial discharge inspection instrument is a digital partial discharge charged detection instrument designed by our company based on years of experience in partial discharge measurement. It adopts two emerging technologies, ultra high frequency (UHF) measurement and ultrasonic (US) measurement. This system uses modern electronic and computer integrated technology to realize signal amplification, filtering, data acquisition, data processing, partial discharge parameter calculation, map drawing, and automatic generation of test reports, thereby completing the intelligent measurement and analysis of partial discharge. This device adopts handheld design and Wince system development; the device is lightweight, convenient to carry, fast to measure, and easy to use on the spot; it has friendly interface, simple operation, and high refresh rate; and the device has complete functions, strong anti-interference ability, and accurate measurement. This instrument has no damage to the power equipment to be tested during the testing process, and has no impact on the operation of the equipment. According to the maps obtained by the multiple detection modes of the UHF and US methods, the diagnostic analysis of the detection of insulation defects or hidden dangers of power equipment can be performed to clearly determine the operating status of the power equipment.
MDC-K400 Square and Round Billet Taper Measuring Instrument
The product description
The square, rectangular and round billet taper measuring instrument adopts high-precision displacement sensor as the measuring element, which has high precision and good repeatability. The measuring trolley ensures that the measuring sensor is in the correct position.
The round copper tube taper measuring instrument ensures that the sensor is located at the diameter of the measuring section circle. Due to the characteristics of the round copper tube, one measurement action can measure multiple physical quantities on the copper tube section.
The square billet taper measuring instrument can arrange measuring points in four directions and can measure straight or curved surfaces respectively, while the rectangular billet taper measuring instrument needs to install six measuring points to measure the taper of multiple faces at the same time.
The product features
1. Use a high-precision vector displacement sensor
2. Battery powered, compact and flexible, easy to carry and use, strong anti-interference ability
3. Use wireless communication function and CRC check technology to ensure no error code and accurate signal transmission
4. SPI all-digital interface, programmable 16-bit A/D converter, with program-controlled digital filtering and program-controlled lossless amplifier inside, fully meeting the measurement requirements
5. High-power rechargeable battery, long standby time, suitable for on-site use of mobile operations
6. The measuring body and the display instrument are connected by wireless WIFI communication, which is easy to use
The performance and index
1. Measurable copper pipe length is more than or equal to 1200mm, the measurement range of straight surface and arc surface displacement is 0-10mm, and the measurement cavity size can be customized according to user needs
2. The measuring range of straight face and arc face displacement is 0-10mm, and the measuring accuracy is less than or equal to 0.01mm
3. It can measure single taper, multi-taper, parabolic taper, continuous data acquisition, and continuous working time not less than 72 hours
4. Use wireless WIFI communication technology and CRC verification technology to ensure no error code and accurate signal transmission
5. Operating temperature of the product: 25 85
6. Power supply: 12V rechargeable battery, continuous measurement time is no less than 16 hours, standard USB interface
Item no mt-170
The mt-170 is the premier pedal for the metal guitarist .There is no way of getting more low end , or more metal in this life .
Item no .Ch-170
The ch-170 is an incredible sounding stereo chorus .It gives you the standard level speed and depth control .This lets you create any kind of chorus effect from a mild .Natural chorus to the clear chorus effect popular in contemporary music .
Item no ph-170
The ph-170 is our unique phaser pedal .The rich phasing gives you that classic phaser sound, but also provides the option of adding regeneration to the effect .This breathes new life into your sound by putting a modern twist on an irreplaceable effect.
Item no .Od-160
A transparent and warm sounding analog op amp overdrive .This pedal will drive and accentuate the nuances of your guitar and playing style .This is similar to a naturally overdriven amplifier.
High pressure wireless phase detector is a dedicated test high-voltage nuclear phase tester based on national power industry standard norms and market demand, and high-voltage nuclear photographic applies to detecting the two-sided circuit breaker of the ring or dual power supply power network closed loop circuit breaker. Whether it is produced in the same phase.
Before the closed loop two power supply, you must perform a nuclear phase, otherwise a short circuit can occur, suitable for the 6KV ~ 220KV transmission line with the electrical core, the sight can reach 200 meters, and the wall can be used, and it has a test function.
Wireless high-pressure cores use wireless transmission technology, safe and reliable operation, easy to use, in line with national electric power safety equipment quality supervision and testing standards. Compared with the cable core, it is the main advantage that the lead wire connected to both grids (power supply) is removed, and the safety is used to improve the security in a manner that is not subject to any terrain and facility architecture.
Technical parameter:
Phase difference
Error 5
Frequency accuracy 0.1Hz
The voltage grade measured by this product is 6kv-220kv
Transmission distance of the transmitter and receiving host
The dl-99 features
* controls:repeat, intensity & echo; ture bypass.
* classic vintage analog delay
* delay range 20ms -600ms
* on/off led status indicator
* runs on 9 v battery or the 9v dc power supply
Bbd analog delay effect pedal
Product description:
Item no.: dl-99a
Bbd analog delay guitar effects pedal
The dl-99a is a true bbd analog delay guitar effects pedal, this analog delay has warm, haunting reverb and tape-like echoes. Its can experience true analog delay and vintage slap-back echo that rivals any tape delay. The vintage bbd produce up to 300ms of delay and advanced noise reduction circuit keeps your signal clean and the dedicated intensity, echo and repeat rate controls for awesome sound shaping.
Dl-99a features
*analog circuit and handmade
*controls: d.Time, d.Level & repeat knobs on face, true bypass design and on/off led status indicator
*connectors: input, output, ac adaptor
*delay range 20ms -300ms
*runs on 9 v battery or the 9v dc power supply
*housed in a compact, die-cast box
*current draw: 11 ma (dc 9v)
*input impedance: 470kohm
*output impedance: over 10kohm
*dimensions: 95(w) x128(h) x65(l) mm
Multi-plug extender for the Cables
Item no: HF19127
Multi-Plug 5 Cable for 1 SPOT Adapter
Connects the 1 SPOT with up to 5 pedals and can be connected to additional cables to power more pedals. Just a single 1 SPOT will power your entire Pedal board!
Performance
H13 die steel has excellent heat strength and hardness, high abrasive resistance and toughness, good hardening properties; high dimensional stability at heat treatment, also pretty good property of resistance to cold and hot fatigue.
Applications
Used for making hot squeezing mould, forging mould, hot extrusion dies, heat-resistant steel .
Daphon brand series products have practised more than 20 years with good quality and prompt delivery service. Our products cover guitar & bass amplifier, all kinds of guitar & bass effect pedals, wah-wah pedals, volume controls, pickups and other guitar & bass accessories.
Item: e20ds- distortion effect pedal for guitar
Dimensions: 130mm*82mm*60mm
Specification:
Model no.: e20ds
Input impedance: 470k
Output impedance:over10k
Power supply:9v dc;9v(6f22) battery;9v adapter
Current draw:8 ma
Connectors:input jack, output jack, dc input
Controls:level, tone, dist
Dimension:130mm*82mm*60mm
Weight:0.65kg
Package:
Each in daphon standard box or customized, then in carton
Pcs/carton: 24pcs
Carton size: 435*335*250mm
G.W.: 21kg
N.W.: 18.5kg
Package:
Each in daphon standard box or customized, then in carton
Pcs/carton: 24pcs
Carton size: 435*335*250mm
G.W.: 21kg
N.W.: 18.5kg
