DTS-CT intelligent precision thermostatic bath is a new type of intelligent thermostat introduced by our company. It adopts touch screen control and operation, completely intelligent man-machine interface, and the control is more convenient, simple and practical. A dual-cavity side stirring technology is used in the structure to make the constant temperature bath reach the ideal uniform temperature field through intelligent PID adjustment, which can meet the verification / calibration work of various temperature sensors such as low temperature thermocouples, industrial thermal resistors, pressure thermometers, bimetallic thermometers, glass liquid thermometers, etc.
1. Intelligent Manipulation
Large touch screen control, intelligent man-machine interface, multi-function display window, control more intuitive, simple and fast;
2. Slope heating
The temperature control rate is adjustable, the heating rate is set according to the actual verification or calibration, and the temperature rise is uniform, which meets the verification / calibration of various temperature switches.
3. Volatility tips
Wave motion of 10 or 1 min can be displayed, the fluctuation can be calculated automatically, and the temperature is judged intuitively.
4. Intelligent rehydration
The automatic rehydration function can be set up, and the oil transportation system can complete the rehydration function after starting, so as to avoid the safety and unstable factors caused by the reduction of liquid level.
5. Intelligent mixing
At room temperature, without starting temperature control, the control system automatically closes the stirring motor, prolongs the service life of the equipment and reduces noise.
6. Double sensor overheating protection
Built-in hardware and software dual protection, using dual sensors to monitor the operation process.
Hardware overheating protection, completely separated from the main control system independent operation, overtemperature automatic power cut off, more safe and reliable.
7. Precision temperature control
8. Excellent stability and uniformity of temperature field
9. Multipoint calibration
Adopt multi-point calibration algorithm to realize built-in standard and precision temperature measurement.
10. Communication function
Support USB ã??WIFIã??WLANã?? serial communication function;
11. Curves show free scaling
Real-time curve display, support multi-touch, free scaling function;
12. Ergonomic design
13. Composite thermal insulation design
14. Oil pollution prevention design
The fsk639d increases under-voltage alarm, start-up indicator,
Overspeed protection/reset/output, dual state(1, 2) closed loop
Adjustment function etc. This product is used for 1000kw engine
Control.
CAEL-S16 Humidity and Temperature Transmitter Features
* Metal probe reduce electromagnetic interference
* Interchangeable sensor for rapid maintenance
* 0 - 100%RH measurement,
* Probe pressure up to 10 bar
* Calculated hygrometric outputs
* Two channel with selectable physical quantity
* Unit support metric or imperial
CAEL-S16 Humidity and Temperature Transmitter Applications
* Semiconductor and microelectronics industry
* Food production and packaging
* Agriculture, farms
* Environmental chambers, drying equipment, spraying equipment
* Greenhouse, storage room, cooling chamber
* HVAC
HCET-B TB02 Bimetal thermostat protections
HCET-A Series Thermostat
HCET-A/TB02 series is a precise protector with small size. It is sensitive, accurate and reliable, especially suitable for heat cable, battery protection board, micro-motor and security protection of transformer. The patent number: ZL2013 20699495.2
Special Features
Electrical Characteristics
Technical Parameters
Main Applications
Small size, Installation is more flexible and convenient;
Have the stable work characteristics and excellent reliability;
Sensitive temperature and snap actionï¼?
Nickel and wires are optionalï¼?
Each type of parts strictly implemented European ROHS environmental standardsï¼?
Terminals are optional with normally closed Model B and normally open Model K
2.5A/250 V AC
5A/120 V AC
10A/12 V AC
5A/24 V AC
Action temperature from 30-155, Every 5 a specification. Temperature is optional and customized.
Temperature tolerance:±3,±5.
Battery pack, Li battery protect board
Electrical tools
PC board, temperature sensitive cable
Heating-pads, electrical blankets
Fluorescent ballasts and lightings,
QCC Quad Channel Controller Description
The QCC Quad Channel Controller offers four channel configurations for monitoring toxic, combustible and/or refrigerant gases with versatile control functionality for non-hazardous, non-explosion rated, commercial and light industrial applications. It is designed to accept inputs from up to four remote digital and/or analog transmitters using digital or 4-20 mA analog input. The QCC is available in two models, the QCC-M with Modbus RS-485 output or the QCC-B with BACnet MS/TP output for communicating with a Building Automation System (BAS).
Standard features include, three configurable SPDT dry contact relays with field configurable time delays and trigger levels, an LCD display with LED indicators for channel alarm status, relay status and fault conditions, an extensive menu system with password protection, logic control, a USB port for firmware upgrades and a door mounted, loud audible alarm that is ideal for noisy environments. Optional value added features include: an analog output module with data logging, a manual shutoff switch (meets B52 code requirements), a top mounted strobe and a water tight, door mounted audible alarm. The QCC can be connected to several remote devices such as a Remote Strobe/Horn Combo, a Remote Display Module and the LNK-AO Analog Output Peripheral Device.
QCC Quad Channel Controller Key Features
* Up to 4 channels of gas readings in any combination of analog and/or digital transmitters
* Modbus RS-485 LAN communications for controlling Peripherals
* Modbus RS-485 (QCC-M) or BACnet® MS/TP (QCC-B) WAN output for communicating with a BAS
* Optional two 4-20 mA outputs with data logging
* Three 5A SPDT dry contact relays
* 4 line, 20 character LCD display with LED indicators
* Standard water / dust tight, corrosion resistant enclosure (drip proof); IP54 rating with door mounted, water tight buzzer installed.
* USB port for firmware upgrades and data logging
* RoHS compliant circuit boards
* Thermal resetting fuses
QCC Quad Channel Controller Applications
* Wastewater Treatment Plants
* Ice Arenas
* Commercial Indoor Swimming Pools
* Chiller Rooms
* Parking Garages
* ... and many more
957 Temperature Controllers Indicators Suppliers
Short on time? Let Temperature Controllers Indicators sellers contact you.
HCET-A/TB02 series is a precise protector with small size. It is sensitive, accurate and reliable, especially suitable for heat cable, battery protection board, micro-motor and security protection of transformer. The patent number: ZL2013 20699495.2
(1)adopt advanced mcu design, conforming pwm charging controlling technology with strong reliability and anti-disturb capability.
(2)adopt solar energy as power source without waste of regular energy.
(3)perfect protective and temperature compensate function to prevent the battery from over voltage or shortvoltage.
(4)with perfect capability, to protect acid battery from over discharge
(5)it can restart electrodeless lamp, the controller can restart itself to make sure electrdeless lamp under normal working status when electrodeless lamp is not able to turn on
(6)work under diferent surroundings.
(7)memory fu nction: startup load mode and main circuit�??s working time can be reached by setting with outer keys. After setting, the time will be saved in memorizer. The data will not disappear even battery is disconnected with controller.
Product description:
Lead-acid, lithium universal charge controller automatically adapt to 12v / 24v system
Three batteries optional. Lead-acid, colloidal, lithium iron phosphate batteries. Select by dip switch
Using pwm three-phase charging technology
Usb port charging controller with 2 usb ports, output voltage usb 5.0v / 2100ma
Full electronic protection
Rapid Temperature Change Test Chamber description:
Rapid temperature changes (damp heat) test chamber is suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature circulating and temperature stress screening (ESS) test, and constant humidity and cyclic damp heat test. This type of machine mainly used to simulate the product in climate conditions, a temperature and humidity conditions or at ambient temperature and humidity conditions, detecting the product features and the adapt change ability. It is the aviation, automobiles, home appliances, research and other fields necessary test equipment.
Rapid temperature change test chamber advantages:
1.Can set the temperature variable rate of the different stress screening
2.Can perform a rapid temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc.
3.Meet the requirements of stress screening test for electronic equipment
4.Switching temperat stress screening (fast temperature change rate) 5deg C/min, 10deg C/min, 15deg C/min experimental conditions
6.Meet the requirements of stress screening test for electronic equipment MIL-STD-2164, MIL-344A-4-16, MIL-2134A-19, NABMAT-9492, GJB-1032-90, GJB/Z34-5.1.6, IPC-9701....ETC.
7.Can carry out the two test methods, temperature test and average temperature test
8.With aluminum sheet test machine load capacity (non plastic load)
9.Single machine can perform fast temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc.
10.Can screen the sample load with a large number
11.Built in two-way USB2.0 portable storage interface (can copy the test curve and load the test program)
12.Complete real-time test curve analysis shows that no time limit
13.Can be integrated with the E management system to monitor the management system
14.Multi-language selection: Chinese, English, Russian, Korean, Japanese, German multilingual language switching.
Rapid temperature change test chamber accessories:
1.Standard equipment
Test product load power supply 3 groups
Each side of the left and right side has a 50mm Pin hole
Pin hole silicone plug 2 PCS
Stainless steel sample holder 2 PCS
20L water storage tank 1 PCS
Pure water filter 1 PCS
Charge modeïPWM
System voltageï12V
Charge current: 8A/10A
Load output voltage: 12V
Battery typeLead acid (GEL, AGM, flooded)
Application
1. The household solar power systems
2. Small solar power system
3. The portable solar application products
1.Electronically regulated charging regime: Boost and float charge
2.Emperature compensation
3.Deep discharge protection
4.PWM series regulation, no panel short circuit
5.Fully electronically protected: panel surge voltage, Wrong polarity at panel or battery,
Overload and short circuit at load
6.LED indications: Charge status, SOC, LVD, Overload/Short-Circuit Common positive allows
grounding
Charge mode, pwm
System voltage, 12v/24v
Charge current: 10a/20a
Output voltage: 12v or 24v
Battery type, lead acid (gel, agm, flooded)
Application ,
1.Street light
2.Advertising lights
(1)adopt advanced mcu design, conforming pwm charging controlling technology, with strong reliability and anti-disturb capability.
(2)adopt solar energy as power source without waste of regular energy.
(3)perfect protective and temperature compensate function to prevent the battery from over voltage or shortvoltage.
(4)with perfect capability, to protect acid battery from over discharge
(5)it can restart electrodeless lamp, the controller can restart itself to make sure electrdeless lamp under normal working status when electrodeless lamp is not able to turn on
(6)work under diferent surroundings.
(7)memory function: startup load mode and main circuits working time can be reached by setting with outer keys. After setting, the time will be saved in memorizer. The data will not disappear even battery is disconnected with controller.
Mini controller
Charge mode, pwm
System voltage, 12v
Charge current: 8a/10a
Load output voltage: 12v
Battery type, lead acid (gel, agm, flooded)
Application ,
1. The household solar power systems
2. Small solar power system
3. The portable solar application products
1.Electronically regulated charging regime: boost and float charge
2.Emperature compensation
3.Deep discharge protection
4.Pwm series regulation, no panel short circuit
5.Fully electronically protected: panel surge voltage, wrong polarity at panel or battery,
Overload and short circuit at load
6.Led indications: charge status, soc, lvd, overload/short-circuit common positive allows
Grounding
The sc solar charge controller series is especially designed for small solar systems with the
Need of a low battery disconnect feature.Main differences to the preceding sc series: the
Regulation circuit provides now series regulation to prevent single cell overheat problems of
Shorcircuited solar panels. The terminal section has been replaced by a rugged, well profane
4mm2 terminal block. The melting fuse of the predecessor has been replaced by a fully
Electronically protected circuit.
2 leds and 1 duo led to display charging in progress, battery soc, load disconnect and overload
Status. Leisure and rural electrification systems are the typical applications for this product. It is a
Perfect solution for cost-sensitive systems which require state-of- the-art system management.
Place of Origin:Zhejiang, China (Mainland)
Brand Name:OEM
Model Number:STC-1000
Usage:Industrial
Theory:Resistance Thermometer
Accuracy:,±1,°C
Temperature range:-30~110,°C, -50~99,°C
Power supply:AC220V ,±10% 50HZ/60HZ
Display:lcd display, celsius
Sensor Type:NTC sensor
About MT-10
We designed the MT-10 to measure the water content, electrical conductivity, and temperature of soil. The MT-10 uses an oscillator running at 70 MHz to measure the dielectric permittivity of soil to determine the water content. A thermistor in thermal contact with the sensor prongs provides the soil temperature. The Polyurethane coating on the MT-10 circuit board protects the components from water damage and gives the sensor a longer life span.
2.1 Specifications
Volumetric Water Content
Range: 0 (air) to 100 (water)
Temperature
Range: -40 to 80
Resolution: 0.01
Accuracy:±0.5
General
Dimensions: 10 cm (1) x 3.2 cm (w) x 0.7 cm (d)
Prong Length: 5.2 cm
Dielectric Measurement Frequency: 70 MHz
Measurement Time: 150 ms (milliseconds)
Power requirements: 3.6 to 30 VDC, 0.3mA quiescent, 10mA during 150 ms measurement
Output: SDI-12 / RS485 MODBUS RTU
Operating Temperature: -40 to 80
Connector Types: 3.5 mm (stereo) plug or stripped & tinned lead wires (Pigtail)
Cable Length: 5 m standard; Maximum 75 m. Please contact if you need longer cable lengths.
PHYSICAL CHARACTERISTICS
SENSOR IMAGE
SENSOR NAMEMT10
DIMENSIONS10 cm X 3.2 cm
CABLE LENGTH5 meters
The MS20 is a high precision and high sensitivity of soil moisture & temperature sensors. By measuring the dielectric constant of the soil, it shows stable real moisture content directly. The MS20 can measure the volume of soil moisture. The FDR soil moisture measurement method is in line with present international standards. Apply to the soil moisture monitoring, scientific experiment, water-saving irrigation, greenhouse vegetables, flowers, grass, fast measure, plant cultivation, greenhouse control, precision agriculture and the other measurement of water, weather or particulate matter content.
Support customer soil type, the user can calibration
Contain moisture & temperature measure. High precision, quick response and good compatibility.
Seal with Fire-retardant Epoxy Resin, IP68 water proofing. Long term usage.
Special treatment of probe material can be against acid and alkali corrosion.
Widely used in many kinds of soil because of the imported advance tech which correct the effect of different salt content.
Multiple protection functions including Power supply, communication, analog output. High reliability.
2 Technical parameter
Technical parameter
Signal output typeRS485 interfaceVoltage outputVoltage output
(Low-voltage)Current output
Output rangeModbus Protocol0-2V
0-5V
0-10V
Customize0-1V
0-2V4-20mA
Customize
Input voltage4.2-30V/DC4.2-30V/DC2.7-16V12-30V/DC
Average working current
1.Operation temperature:450
2.The id of plug hole: 3.5mm, 6.3mm
3.Long life time: over 10 years
4.Wire length, termianl and structure can be customized
Application: oven, toaster, mirowave, bread machine , grill and other kitchen appliances.
957 Temperature Controllers Indicators Suppliers
Short on time? Let Temperature Controllers Indicators sellers contact you.
