Kunshan Talents Test Technical Services Co., Ltd

Rapid Temperature Change Test Chamber description:

Rapid temperature changes (damp heat) test chamber is suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature circulating and temperature stress screening (ESS) test, and constant humidity and cyclic damp heat test. This type of machine mainly used to simulate the product in climate conditions, a temperature and humidity conditions or at ambient temperature and humidity conditions, detecting the product features and the adapt change ability. It is the aviation, automobiles, home appliances, research and other fields necessary test equipment.

Rapid temperature change test chamber advantages:

1.Can set the temperature variable rate of the different stress screening
2.Can perform a rapid temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc.
3.Meet the requirements of stress screening test for electronic equipment
4.Switching temperat stress screening (fast temperature change rate) 5deg C/min,  10deg C/min,  15deg C/min experimental conditions
6.Meet the requirements of stress screening test for electronic equipment MIL-STD-2164, MIL-344A-4-16, MIL-2134A-19, NABMAT-9492, GJB-1032-90, GJB/Z34-5.1.6, IPC-9701....ETC.
7.Can carry out the two test methods, temperature test and average temperature test
8.With aluminum sheet test machine load capacity (non plastic load)
9.Single machine can perform fast temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc.
10.Can screen the sample load with a large number
11.Built in two-way USB2.0 portable storage interface (can copy the test curve and load the test program)
12.Complete real-time test curve analysis shows that no time limit
13.Can be integrated with the E management system to monitor the management system
14.Multi-language selection: Chinese, English, Russian, Korean, Japanese, German  multilingual language switching.

Rapid temperature change test chamber accessories:
1.Standard equipment
Test product load power supply 3 groups
Each side of the left and right side has a 50mm Pin hole
Pin hole silicone plug 2 PCS
Stainless steel sample holder 2 PCS
20L water storage tank 1 PCS
Pure water filter 1 PCS

Temperature and Humidity Test Chamber Basic introduction:
Environmental test chamberr/constant temperature and humidity chamber simulating product under the condition of temperature and humidity combination (high and low temperature operation & storage, temperature cycle, high temperature and high humidity, low temperature and humidity and condensation test, etc.), check whether the adaptability and characteristics of the product itself have changed.

Need to meet the requirements of international standard (IEC, JIS, GB, MIL...). in order to achieve International quantum measurement procedures consistency (including test steps, conditions, methods). To avoid different cognitive, and reduce uncertainly factors scope of measurement.

Six advantages of Sanwood Temperature and Humidity Test Chamber:
1.Evaporator no frosting under longtime Low temperature and low humidity running.
2.Automatic control system refrigerant demand save electricity above 30%
3.High heat load tested samples test environment
4.realize 95 95%high temperature and high humidity environment.
5.10% 20 ultra-low temperature range control ability
6.Multi-language selection: Chinese, English, Russian, Korean, Japanese, German multilingual language switching.

High and low temperature explosion-proof test chamberStructure and Characteristics:

1.It is composed of the chamber, refrigeration systems, heating systems, air circulation system and control system.

2.The working chamber is made of high quality SUS#304 stainless steel material,the outer shell adopts A3 steel plate,surface electrostatic spraying.

3.Insulation system uses superfine fiberglass wool or polyurethane foam so as to ensure the temperature of inside chamber.

4.Temperature and humidity control adopts Korean import TEMI360 programmable touch screen temperature and humidity controller, with automatic calculation of PID function.

5.Adopts steam humidifying method, automatic water circulation loop,with functions of automatic filling water.

6.Refrigeration system adopts original France "Taikang" refrigeration unit and full sets of refrigeration parts.

7.Input mode PT100 sensor.

8.The system of heating up, heating down, dehumidifying, and humidifying can be operated independently so as to reduce the cost of testing, extend the operating life of the machine and decrease the failure rate.

9.Powerful multi-wing type air circulation which can ensure even temperature distribution inside the working chamber.

10.With larger transparent viewing window and lighting inside to observe the test.

11.Door seal adopts silicone rubber material which can avoid aging and hardening in high and low temperature conditions.

12.Standard configuration with one test hole on the left side of the chamber for easy testing operation and temperature measurement.

13.With various of safety protection device such as leakage and outage protection,compressor over pressure protection,overload fusing protection,audio signal alarm.

- Material : Stainless Steel Core, Polyethylene Yarn, Span Yarn
- Number of Stitiches : 10 Gauge
- Length : 14 inch
- Cut Level : 5
- Color : Gray, Black, White
- Packing : 1pair/individual packing (1pack=5pair, 1box=200pair)
- Origin : Made in South Korea
- Purpose : Cut Resistant

Scope
Standards: gb/t 2361 and astm d1748
It is widely used in pharmaceutical, textile, food processing, bio-engineering experiments and industrial products of the temperature and humidity testing.

Features
1. Mirror stainless steel liner, surrounded is designed and made as per semicircular easy to clean, inside adjustable shelf spacing;
2. The use of double doors, insulation performance is good. Interior doors is use full glass door, open the outer door, observing the situation does not affect the internal temperature inside;
3. High-precision, high-capacity humidity generator. Ensure humidity control occurs, high precision, small fluctuations;
4. The original french “taikang” closed compressor, configure delay start. High and low pressure multiple protection.

Technical parameters
1. Dimensions: mm (depth × width × height) in order to prevail in kind
2. Room size: 400 × 400 × 500mm (depth × width × height)
3. Measuring range: 10 °c~ 85 °c (determined according to customer requirements)
4. The temperature fluctuation: ± 1 °c (no load)
5. The temperature uniformity: ± 2 °c (no load)
6. Humidity control range: 40 ~ 95% rh (no load)
7. Heating method rate: 3 ~ 4 °c/ min (no load)
8. Humidity fluctuation: ± 5% rh
9. The noise (db): 65
10. Power supply: 220v ± 10%, 50hz ± 1 ground wire, protective earth resistance of less than 4o
11. The total power: 1.8kw

E the internal temperature effectively.
4. Water supply system that is externally connectable, convenient for refilling water into the humidifying pot and automatically recyclable.
5.French tecumseh is used as compressor, with environment friendly refrigeration r232 or r404a
6. Lcd display screen, capable of displaying the measured value as well as the set value and time.
7. The control unit has the functions of multiples segment program editing, with quick or ramp rates control of temperature and humidity.
8. casters are provided for ease of mobility, with strong positioning screws.


Vices: fuse free switch, overloading protection switch for compressor, high and


Wooden case

Supplier of walk-in environmental test chamber. Designed to perform high-temperature operations for large-sized test specimens. The multipurpose walk-in chamber is the perfect site for testing the components against humidity, temperature, and various climate conditions.

XM452 Temperature Humidity Controller for Incubator With Indicators Thermometer Hygrometer Automatic
XM452 Temperature Humidity Controller for Incubator With Indicators Thermometer Hygrometer Automaticpower supply :DC 12V Temperature measurement range:- 40~120? Humidity range?0~100%RH Control precision?0.1? 0.1% RH Test probe?Integrated sensor output:10A delay Size:65*55*28mm
temperature control: 1. Set the temperature + ?Normal display mode, long press the + key for 3 seconds, start temperature numerical flashing, press the + / - key setting values, wrong operation after 5 seconds, automatically return to detect temperature display 2. Set the temperature ?- Normal display mode, long press - button for 3 seconds, stop numerical flashing temperature, press the + / - key set value 3. Restore the factory Settings:- At the same time long press temperature, and humidity
Set the start temperature:Long press the + key, start the flashing temperature, set start temperature by + / - key set Stop temperature:- long press - button, stop flashing temperature, set stop temperature by + / - key
Humidity Settings: Set to start humidity: long-press the + key, start the humidity value flashing, set by + / - key launch humidity value Set stop humidity:- long press - to stop humidity value, set by + / - key to stopping the humidity value Fault code:- display LLL means the sensor fault display HHH mean Test temperature exceeds the range of measurement

Temperature Humidity Controller XM452
power supply: DC 12V Temperature measurement range:- 40~120? Humidity range?0~100%RH Control precision?0.1? 0.1% RH Test probe?Integrated sensor output:10A delay Size:65*55*28mm
temperature control: 1. Set the temperature + ?Normal display mode, long-press the + key for 3 seconds, start temperature numerical flashing, press the + / - key setting values, wrong operation after 5 seconds, automatically return to detect temperature display 2. Set the temperature ?- Normal display mode, long press - button for 3 seconds, stop numerical flashing temperature, press the + / - key set value 3. Restore the factory
Settings:- At the same time long press temperature, and humidity
Set the start temperature:Long press the + key, start the flashing temperature, set start temperature by + / - key set Stop temperature:- long press - button, stop flashing temperature, set stop temperature by + / - key
Humidity Settings: Set to start humidity: long-press the + key, start the humidity value flashing, set by + / - key launch humidity value Set stop humidity:- long press - to stop humidity value, set by + / - key to stopping the humidity value Fault code:- display LLL mean the sensor fault display HHH mean Test temperature exceeds the range of measurement