Max. Product Volume L 12L/1;5L/2
Dry cycle PC/H 600x2
Screw diameter MM 90
screw L/D ratio L/D 25
screw motor power KW 37
screw heating capacity KW 6.8
No. of heating zone Zone 4
output of HDPE KG/H 130-150
oil pump driver power KW 18.5
clamping force KN 160
mold stroke MM 240-600
size of mold(W*H) MM 550x500
Moving distance MM 600
Max. Die diameter(W*H) MM 220
Die heat capacity KW 3.5-5.3
Blowing pressure MPA 0.6-0.8
Air volume M3/Min 0.8
Cooling water pressure MPA 0.5
water consumption L/Min 80
weight of machine Ton 12
size of machine M 4.5x3.3x2.8
5L, 10L extrusion blow molding machine JN-90U
double station single die head for 10L ,1 cavity
double die head for 5L, 2cavity
The machine is used to produce the bottles, engine oil bottle, water container etc.
Welcome inquiry!
71 Injection Moulding Machinery Suppliers
Short on time? Let Injection Moulding Machinery sellers contact you.
CM-A4 Full automatic blow molding machine is suitable for producing PET/PE and PP plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. The maximize volume of molded product and the maximize product capacity can reach respectively 2000ml and 4000pcs/h.
1. Reasonable design, full automatic control, save power and labor. Adopt high quality components.
2. Feeding system carries the preforms by robot automatically.
3. Infrared oven heater adopts the quartz lamp to heat the PET tube.
4. Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble -shooting, maintenance and other benefits.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
-
Key Specifications/Special Features:
* Material: PET PP PE
* Pneumatic part:
o Valve SMC
o Cylinder SMC
* Electric part:
o PLC LG/Mitsubishi
o Operation system LG/Hitech
o Relay OMRON
o Infrared thermometer
o America raytek
* Electrical components adopts CE, UL, CCC approved international advanced high-tech product
* Output Depend on bottle design: 3,200 to 4,000 pieces/h
* Body diameter: 20 to 100mm
* Height: 50 to 350mm
* Neck diameter: 15 to 38mm
* Mould cavity four cavity
* Mould thickness: 240mm
* Mould 500 x 500mm
* Electrical source power 380/220V 3Phase 50/60Hz
* Power: 49kW
* Really use power 14kW
* Air source:
o LP air compressor 1.6m3/min 1.0MPa, one set (7.5kW)
o HP air compressor 1.0m3/min 3.0Mpa two set (each set 11kW)
o Air dryer 2.0m3/min 3.0MPa 1set
o Cooling water :Cooling water 15L/min
o Size (L x W x H): 1,908 x 1,858 x 1,920mm
o Weight: 3,600kg
o Auxiliary equipment
* Pre-form unscrambler is equipped:
o Size (L x W x H): 276 x 106 x 186mm
o Weight: 250kg
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
CM-8Y heat-resistant bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. Its maximize product capacity can reach 1000pcs/h.
1. Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the preform, the preform rotated and heated equally.
2. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4. The machine can be operated in the step-by-step mode and the semi-auto mode.
5. The machine is small with low investment, easy and safe to operate.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
-
Key Specifications/Special Features:
* Heat-resistant bottle blow-molding machine
* Suitable for producing PET plastic containers and bottles from 10-2,000ml
* Used to produce carbonated bottle, mineral water pesticide bottle, oil bottle cosmetics wide mouth bottle and hot fill bottle
* Adopts double crank to adjust mold, heavy locking mold, stable and fast
* Adopts infrared oven to heat perform, perform rotated and heated equally
* Air system has been divided into two parts: pneumatic action part and bottle blow part to meet different requirements for action and blow
* Can provide sufficient and steady high pressure for blowing large irregular shaped bottles
* Equipped with muffler and oiling system to lubricate mechanical part of machine
* Can be operated in step-by-step mode and semi-auto mode
* Small with low investment, easy and safe to operate
* Can produce PET bottles which can resist high temperature, such like 92 deg. C
* For traditional juice and other liquid food packing
* Container:
o Material: PET, PP and PE
o Volume: 0.1-2L
o Theoretical output: 600 to 800 pieces/H
o Preform length: 15 to 350mm
o Preform inner diameter: ? 5 to 38mm
* Molding:
o Maximum mold plate dimension (L x W): 350 x 380mm
o Maximum mold thickness: 180mm
o Clamping force: 45kN
o Mold opening stroke: 16mm
* Machine size and weight:
o Main machine (L x W x H): 160 x 60 x 161cm
o Main machine weight: 500kg
o Heater (L x W x H): 187 x 63 x 145cm
o Heater weight: 250kg
* Power: 24.8kW
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
CM-8Y semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water, carbonated drink bottle, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc. Its maximize product capacity can reach 1600pcs/h.
1. Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the preform, the preform rotated and heated equally.
2. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4. The machine can be operated in the step-by-step mode and the semi-auto mode.
5. The machine is small with low investment, easy and safe to operate.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
-
Key Specifications/Special Features:
* Suitable for producing PET plastic containers and bottles from 10 to 2,000mL
* Used to produce carbonated bottles, mineral water, carbonated drink bottles, pesticide bottles, oil bottles, cosmetics, wide-mouth bottles
* Adopts double crank to adjust mold, heavy locking mold, stable and fast
* Adopts infrared oven to heat perform, perform rotated and heated equally
* Air system has been divided into two parts: pneumatic action part and bottle blow part to meet different requirements for action and blow
* Can provide sufficient and steady high pressure for blowing large irregular shaped bottles
* Equipped with muffler and oiling system to lubricate mechanical part of machine
* Can be operated in step-by-step mode and semi-auto mode
* Small with low investment, easy and safe to operate
* Container:
o Material: PET, PP and PE
o Volume: 0.1 to 2L
o Theoretical output 1,200 to 1,600
o Preform length: 15 to 350mm
o Preform inner diameter: ? 5 to 38mm
* Molding:
o Max mold plate dimension (L x W): 350 x 380mm
o Max mold thickness: 180mm
o Clamping force: 45kN
o Mold opening stroke: 16mm
* Machine size and weight:
o Main machine (L x W x H): 160 x 60 x 161cm
o Main machine weight: 500kg
o Heater (L x W x H): 187 x 63 x 145cm
o Heater weight: 250kg
* Power 17.5kW
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
CM-12 blow molding machine is especially used to produce 3 gallon and 5 gallon bottles and it is widely used to produce any shape of plastic from PET with neck finishes from 15mm-200mm. Its maximize product capacity can reach 1000pcs/h.
1. Perfect function with economic investment.
2. Small size and compact construction with no space waste.
3. Easy to operate and maintain, operation by one person.
4. Saving power and uneasy to worn out, Adopting new double crank four bars to lock mould, the cross fixed. Providing high pressure blowing system.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
-
Key Specifications/Special Features:
* Widely used to produce various shape of plastic from PET
* With neck finish: 15 to 200mm
* Perfect function with economic investment
* Small size and compact construction with no space waste
* Easy to operate and maintain ,operation by one person
* Saving power and uneasy to worn out
* Adopting new double crank four bars to lock mould, the cross fixed
* Providing high pressure blowing system
* Container:
o Product material: PET, PP, PE
o Volume L: 10-25L (3-5 gallon)
o Theoretical output: 90 to 180 pieces/h
o Preform inner diameter: 15 to 200mm
* Moulding:
o Max mould plate dimensions (L x W): 420 x 500mm
o Max.mould thickness: 40 mm
o Clamping force: 330KN
o Mould opening stroke: 38mm
* Machine size and weight:
o Main machine (L x W x H): 218 x 77 x 196cm
o Main machine weight 1,000kg
o Heater (L x W x H): 237 x 68 x 165cm
o Heater weight: 380kg
* Power: 40kW
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
1. Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the preform, the preform rotated and heated equally.
2. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4. The machine can be operated in the step-by-step mode and the semi-auto mode.
5. The machine is small with low investment, easy and safe to operate.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
-
Key Specifications/Special Features:
* Suitable for producing PET plastic containers and bottles from 10 to 2,000ml
* Used to produce carbonated bottles, mineral water, carbonated drink bottles, pesticide bottles, oil bottles, cosmetics, wide-mouth bottles
* Adopts double crank to adjust mold, heavy locking mold, stable and fast
* Adopts infrared oven to heat perform, perform rotated and heated equally
* Air system has been divided into two parts: pneumatic action part and bottle blow part to meet different requirements for action and blow
* Can provide sufficient and steady high pressure for blowing large irregular shaped bottles
* Equipped with muffler and oiling system to lubricate mechanical part of machine
* Can be operated in step-by-step mode and semi-auto mode
* Small with low investment, easy and safe to operate
* Container:
o Material: PET, PP and PE
o Volume: 0.1 to 2L
o Theoretical output: 600 to 800 pieces/H
o Preform length: 15 to 350mm
o Preform inner diameter: ? 5-38mm
* Molding:
o Maximum mold plate dimension (L x W): 350 x 380mm
o Maximum mold thickness: 180mm
o Clamping force: 45kN
o Mold opening stroke: 16mm
* Machine size and weight:
* Machine size and weight:
o Main machine (L x W x H): 160 x 60 x 161cm
o Main machine weight: 500kg
o Heater (L x W x H): 187 x 63 x 145cm
o Heater weight: 250kg
o Power: 17.5kW
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
CM-A2 Full automatic blow molding machine is suitable for producing PET/PE and PP plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. The maximize volume of molded product and the maximize product capacity can reach respectively 2000ml and 2000pcs/h.
1. Reasonable design, full automatic control, save power and labor. Adopt high quality Components.
2. Feeding system carries the preforms by robot automatically.
3. Infrared oven heater adopts the quartz lamp to heat the PET tube.
4. Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble -shooting, maintenance and other benefits.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
-
Key Specifications/Special Features:
* Material: PET, PP, PE
* Pneumatic part:
o Valve SMC
o Cylinder SMC
* Electric part:
o PLC LG/Mitsubishi
o Operation system LG/Hitech
o Relay OMRON
o Infrared thermometer
o America raytek
* Electrical components adopts CE, UL, CCC approved international advanced high-tech product
* Output depend on bottle design: 1,800 to 2,000
* Body diameter: 20 to 100mm
* Height: 50 to 350mm
* Neck diameter: 15 to 38mm
* Mold cavity to cavity
* Mold thickness: 240mm
* Mold 500 x 500mm
* Electrical source power 380/220V 3 Phase 50/60Hz
* Power: 25kW
* Really use power: 6kW
* Air source:
o LP air compressor 1.0m3 1.0MPa 1 set (7.5kW)
o HP air compressor 0.73 3.0MPa 2 set (each set 11kW)
o Air dryer 1.03 3.0MPa 1 set
o Cooling water: cooling water 10L
o Size (L x W x H): 1,908 x 1,280 x 1,920mm
o Weight: 2,000kg
o Auxiliary equipment
o Pre-form unscrambler is equipped:
* Size (L x W x H): 276 x 106 x 186mm
* Weight: 250kg
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
16-cavity compression molding machine:
Type JF-30BY (16T)
Quantity of mold head 16
Capacity 9000-11000pcs/hr
Cap diameter 22mm-45mm
Cap height 10mm-25mm
Power of heating ring of the extruder 11KW
Power of electromotor of the extruder 4.5KW
Power of electromotor of the molding press machine 1.1KW
Power of hydraulic pressure 7.5KW
Power of cooling system 3KW
Air consumption 6kgs, 0.5m3/hr
Power,Voltage 380V,50HZ
Weight 2500kg
Size 2700, 1150, 2100mm
24-cavity compression molding machine:
Type JF-30BY (24T)
Quantity of mold head 24
Capacity 15000-18000pcs/hr
Cap diameter 22mm-45mm
Cap height 10mm-25mm
Power of heating ring of the extruder 11KW
Power of electromotor of the extruder 7.5KW
Power of electromotor of the molding press machine 2.2KW
Power of hydraulic pressure 11KW
Power of cooling system 3KW
Air consumption 6kgs, 0.5m3/hr
Power,Voltage 380V,50HZ
Weight 3800kg
Size 3500,1400,1900mm
36-cavity compression molding machine:
Type JF-30BY (36T)
Quantity of mold head 36
Capacity 27000-30000pcs/hr
Cap diameter 22mm-45mm
Cap height 10mm-25mm
Power of heating ring of the extruder 19KW
Power of electromotor of the extruder 15KW
Power of electromotor of the molding press machine 3KW
Power of hydraulic pressure 18.5KW
Power of cooling system 3KW
Air consumption 6kgs, 0.5m3/hr
Power,Voltage 380V,50HZ
Weight 5200kg
Size 5500,3500,2200mm.
Dakumar high speed injection moulding machine from the model Nr. DKM118 to DKM780, the standard high speed injection moulding machines are equiped with accumulator to realize the high speed turning of the screw. The optional for high speed mould close and mould open are also available. Dakumar high speed injection moulding machine has the special design for the machine's base, machine's frame and especially the clamping system. In the past several years international fair, Dakumar high speed injection moulding machines are always displayed. The high speed, precision injection... all these has got the high praise from all the visitors and all our high speed injection moulding machine's user.
Main parameterú¦
TYPE ITEM UNIT PARAMETER
Container Product material / PET PP PE
Volume L 10-25Lú¿3-5 Gallon
Theoretical output PCS/H 90-180
Preform length mm 15-460
Preform inner diameter mm ª+15-200
Moulding Max.mould plate Dimenstion(L x W) mm 420x500
Max.mould thickness mm 40
Clamping force KN 330
Mould opening stroke mm 38
Machine size and weight Main machine (L x W x H) cm 218x77x196
Main machine weight Kg 1000
Heater (L x W x H) cm 237x68x165
Heater weight Kg 380
Power kw 40
Rotary blowing method: professionally designed robot sends preform and takes bottle out automatically and accurately.
Convenient operation system: Through touching screen operation, it can be changed frequently to adjust the parameter and have the widely operation.
Automatic controlling: adopting precise and swift PLC controlling, it has the features of high precision and swift reaction.
Blowing air system: specialized designing of three-work-place and multi-work-place combination valve makes blowing and pulling steady and precise and also keep the blowing effect in a pace all the time.
Mould and replacement: specialized designing of enough tons of lock-mould system and swift load-load-mould structure.It has reliable installation and swift replacement .
Heating device: The intelligence numerical control, feeds back the compensation system automatically,it can show enough the degree and quality of preform heating and keep the bottle mouth protection and cooling heating interchange horizontal line in accordance all the time. Namely ensure the product quality and reduce the production consumption thoroughly
Low noisy sound :reducing-sound machine system, which is designed of circle close and single-path
Features that can sight: the whole production procedures and machine's components can be observed through the transparent windows the operator can master the production and machine's running case at any time and it's good for maintenance of normal production and safety running machine.
CM-8Y heat-resistant bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
The machine can be operated in the step-by-step mode and the semi-auto mode.
The machine is small with low investment , easy and safe to operate.
This machine can producing PET bottle which can resist high temperature, such like 92 centigrade degree. This has solved the problem of the traditional juice and other liquid food packing.
Main parameterú¦
TYPE ITEM UNIT PARAMETER
Container Product material / PET PP PE
Volume L 0.1-2
Theoretical output PCS/H 600-800
Preform length mm 15-350
Preform inner diameter mm ª+5-38
Moulding Max.mould plate Dimenstion(L x W) mm 350x380
Max.mould thickness mm 180
Clamping force KN 45
Mould opening stroke mm 16
Machine size and weight Main machine (L x W x H) cm 160x60x161
Main machine weight Kg 500
Heater (L x W x H) cm 187x63x145
Heater weight Kg 250
Power kw 24.8
CM-8Y1 semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.
Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
The machine can be operated in the step-by-step mode and the semi-auto mode.
The machine is small with low investment, easy and safe to operate.
Main parameterú¦
TYPE ITEM UNIT PARAMETER
Container Product material / PET PP PE
Volume L 0.1-2
Theoretical output PCS/H 600-800
Preform length mm 15-350
Preform inner diameter mm ª+5-38
Moulding Max.mould plate Dimenstion(L x W) mm 350x380
Max.mould thickness mm 180
Clamping force KN 45
Mould opening stroke mm 16
Machine size and weight Main machine (L x W x H) cm 160x60x161
Main machine weight Kg 500
Heater (L x W x H) cm 187x63x145
Heater weight Kg 250
Power kw 17.5
71 Injection Moulding Machinery Suppliers
Short on time? Let Injection Moulding Machinery sellers contact you.
