Tetra Pak, Newamstar and other companies from food processing and filling machine industry are using PEEK components from ARK International. It is widely used in washing, sterilization, aseptic packaging process.
Available parts: Clamp column, Fork, Roller, Sleeve, Bottle clamp, Turbine.
Our aluminum composite panel(acp) equipment is used for consecutive extruding pe coreboard, after its top and bottom both sides composite with aluminum coils, then we produce the aluminum composite panels with the methods of hot roll-press process and cutting. Now acp is widely used as the building material which has a very nice future.
Specification:
Needle pitch:1/3 inch
Brand:qingben
4-needle basic type double chain stitch sewing machine
Characteristic:
1.Automatic oiling, back and forth driving looper
Mechanism multi-needle double chain stitch machine.
2.Half cylinder bed, it is suitable for sewing on cylinder clothing, and easy to operate.
3.Burked adjust needle distance, it is high effciency and easy to operate.
Optional attachment
Vce:rubber slice-leading device
Rl:loop trouser waist support wheel
Vwl:front elastic feeding device, it is easy to operate and the elasticity can be adjusted.
Fh:below-table tape feeding holder
Vad:pneumatic lift-press feet device
G.W.:52kgs n.W.:48kgs
Measurement:0.15cbms
762 Coir Machinery Suppliers
Short on time? Let Coir Machinery sellers contact you.
Voltage:ac220v, power capacity:3.2, no -load voltage(v):65
Current range:20-80, rated duty cycle:40, power factor:0.93, weight£º2.5kgs
Protection class of case:21s
Features:
A) portable hand type, diy suit for family mma welding first
B) fan-cooled, fixed cable electrode / clamp, on wheel.
C) thermal protection, stepless current adjustment, double voltage switch
D) tranditional transformer durable, economical.
Model: bx1-180c
Main voltage: 1ph 230v / 400v
Frequency: 50/60hz
Rated input capacity: 9.4kva
Max no-load capacity: 48v
Current range: 55-160a
Rated duty cycle: 10%
Usable electrode: 2.0-4.0mm
Insulation class: h
Protection degree: ip21s
Packing dimension: 47*26.5*31.5cm
Gross weight: 21.2kg
Standard accessories:
A) hand-held shield with glass 1 piece
B) hammer / brush 1 piece.
Dakumar high speed injection moulding machine from the model Nr. DKM118 to DKM780, the standard high speed injection moulding machines are equiped with accumulator to realize the high speed turning of the screw. The optional for high speed mould close and mould open are also available. Dakumar high speed injection moulding machine has the special design for the machine's base, machine's frame and especially the clamping system. In the past several years international fair, Dakumar high speed injection moulding machines are always displayed. The high speed, precision injection... all these has got the high praise from all the visitors and all our high speed injection moulding machine's user.
Weight: 2.0kg
Size: 810*110*110mm
Efficiency: 2-3acres/day
Single plant hole volume: 2-6pieces(can change)
Loaded weight: 4.0kg
Sharp mouth, suit for the rigid soil.
The first-era portable seeder.
Suit for the farmer to sowing seeds instead of the manual work, portable and high efficiency.
CDS series of single-shaft shredders are widely uesd in the plastic materials, such as headstock, thick-wall plastic sheet, pipe, hollow plastic products, chemical blue bucket, plastic tray, rubber, film, nets, carpets, wood, kitchen and domestic garbage, we can also customize the special models basis on customer demand,. Adopt PLC can automatically control, stop, reverse and overload automatic reverse. With speed, high torque, low noise and so on.
Main features:
No. 1 Spindle Rotor: According to different materials, the spindle rotor use rotor arrangement to form a different rotor. The knife can be used symmetrically.
No 2 External bearing housings: Housing installed outside of main body, adopt wool felt seal between the spindle and the box, effectively prevent the crushed material into the bearing box to improve bearing life
No. 3 Exchange screen by hydraulic press: Automatic opening and closing by hydraulic, to provide fast for exchange net and save the maintenace time.
Max. Product Volume L 12L/1;5L/2
Dry cycle PC/H 600x2
Screw diameter MM 90
screw L/D ratio L/D 25
screw motor power KW 37
screw heating capacity KW 6.8
No. of heating zone Zone 4
output of HDPE KG/H 130-150
oil pump driver power KW 18.5
clamping force KN 160
mold stroke MM 240-600
size of mold(W*H) MM 550x500
Moving distance MM 600
Max. Die diameter(W*H) MM 220
Die heat capacity KW 3.5-5.3
Blowing pressure MPA 0.6-0.8
Air volume M3/Min 0.8
Cooling water pressure MPA 0.5
water consumption L/Min 80
weight of machine Ton 12
size of machine M 4.5x3.3x2.8
5L, 10L extrusion blow molding machine JN-90U
double station single die head for 10L ,1 cavity
double die head for 5L, 2cavity
The machine is used to produce the bottles, engine oil bottle, water container etc.
Welcome inquiry!
The folder is a patent product which is made of newly improved PP, with stereoscopic patten on the surface that contributes to its aesthetic perception.
CM-A4 Full automatic blow molding machine is suitable for producing PET/PE and PP plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. The maximize volume of molded product and the maximize product capacity can reach respectively 2000ml and 4000pcs/h.
1. Reasonable design, full automatic control, save power and labor. Adopt high quality components.
2. Feeding system carries the preforms by robot automatically.
3. Infrared oven heater adopts the quartz lamp to heat the PET tube.
4. Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble -shooting, maintenance and other benefits.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
-
Key Specifications/Special Features:
* Material: PET PP PE
* Pneumatic part:
o Valve SMC
o Cylinder SMC
* Electric part:
o PLC LG/Mitsubishi
o Operation system LG/Hitech
o Relay OMRON
o Infrared thermometer
o America raytek
* Electrical components adopts CE, UL, CCC approved international advanced high-tech product
* Output Depend on bottle design: 3,200 to 4,000 pieces/h
* Body diameter: 20 to 100mm
* Height: 50 to 350mm
* Neck diameter: 15 to 38mm
* Mould cavity four cavity
* Mould thickness: 240mm
* Mould 500 x 500mm
* Electrical source power 380/220V 3Phase 50/60Hz
* Power: 49kW
* Really use power 14kW
* Air source:
o LP air compressor 1.6m3/min 1.0MPa, one set (7.5kW)
o HP air compressor 1.0m3/min 3.0Mpa two set (each set 11kW)
o Air dryer 2.0m3/min 3.0MPa 1set
o Cooling water :Cooling water 15L/min
o Size (L x W x H): 1,908 x 1,858 x 1,920mm
o Weight: 3,600kg
o Auxiliary equipment
* Pre-form unscrambler is equipped:
o Size (L x W x H): 276 x 106 x 186mm
o Weight: 250kg
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
CM-8Y heat-resistant bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. Its maximize product capacity can reach 1000pcs/h.
1. Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the preform, the preform rotated and heated equally.
2. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4. The machine can be operated in the step-by-step mode and the semi-auto mode.
5. The machine is small with low investment, easy and safe to operate.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
-
Key Specifications/Special Features:
* Heat-resistant bottle blow-molding machine
* Suitable for producing PET plastic containers and bottles from 10-2,000ml
* Used to produce carbonated bottle, mineral water pesticide bottle, oil bottle cosmetics wide mouth bottle and hot fill bottle
* Adopts double crank to adjust mold, heavy locking mold, stable and fast
* Adopts infrared oven to heat perform, perform rotated and heated equally
* Air system has been divided into two parts: pneumatic action part and bottle blow part to meet different requirements for action and blow
* Can provide sufficient and steady high pressure for blowing large irregular shaped bottles
* Equipped with muffler and oiling system to lubricate mechanical part of machine
* Can be operated in step-by-step mode and semi-auto mode
* Small with low investment, easy and safe to operate
* Can produce PET bottles which can resist high temperature, such like 92 deg. C
* For traditional juice and other liquid food packing
* Container:
o Material: PET, PP and PE
o Volume: 0.1-2L
o Theoretical output: 600 to 800 pieces/H
o Preform length: 15 to 350mm
o Preform inner diameter: ? 5 to 38mm
* Molding:
o Maximum mold plate dimension (L x W): 350 x 380mm
o Maximum mold thickness: 180mm
o Clamping force: 45kN
o Mold opening stroke: 16mm
* Machine size and weight:
o Main machine (L x W x H): 160 x 60 x 161cm
o Main machine weight: 500kg
o Heater (L x W x H): 187 x 63 x 145cm
o Heater weight: 250kg
* Power: 24.8kW
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
CM-8Y semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle, mineral water, carbonated drink bottle, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc. Its maximize product capacity can reach 1600pcs/h.
1. Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the preform, the preform rotated and heated equally.
2. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4. The machine can be operated in the step-by-step mode and the semi-auto mode.
5. The machine is small with low investment, easy and safe to operate.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
-
Key Specifications/Special Features:
* Suitable for producing PET plastic containers and bottles from 10 to 2,000mL
* Used to produce carbonated bottles, mineral water, carbonated drink bottles, pesticide bottles, oil bottles, cosmetics, wide-mouth bottles
* Adopts double crank to adjust mold, heavy locking mold, stable and fast
* Adopts infrared oven to heat perform, perform rotated and heated equally
* Air system has been divided into two parts: pneumatic action part and bottle blow part to meet different requirements for action and blow
* Can provide sufficient and steady high pressure for blowing large irregular shaped bottles
* Equipped with muffler and oiling system to lubricate mechanical part of machine
* Can be operated in step-by-step mode and semi-auto mode
* Small with low investment, easy and safe to operate
* Container:
o Material: PET, PP and PE
o Volume: 0.1 to 2L
o Theoretical output 1,200 to 1,600
o Preform length: 15 to 350mm
o Preform inner diameter: ? 5 to 38mm
* Molding:
o Max mold plate dimension (L x W): 350 x 380mm
o Max mold thickness: 180mm
o Clamping force: 45kN
o Mold opening stroke: 16mm
* Machine size and weight:
o Main machine (L x W x H): 160 x 60 x 161cm
o Main machine weight: 500kg
o Heater (L x W x H): 187 x 63 x 145cm
o Heater weight: 250kg
* Power 17.5kW
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
CM-12 blow molding machine is especially used to produce 3 gallon and 5 gallon bottles and it is widely used to produce any shape of plastic from PET with neck finishes from 15mm-200mm. Its maximize product capacity can reach 1000pcs/h.
1. Perfect function with economic investment.
2. Small size and compact construction with no space waste.
3. Easy to operate and maintain, operation by one person.
4. Saving power and uneasy to worn out, Adopting new double crank four bars to lock mould, the cross fixed. Providing high pressure blowing system.
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
-
Key Specifications/Special Features:
* Widely used to produce various shape of plastic from PET
* With neck finish: 15 to 200mm
* Perfect function with economic investment
* Small size and compact construction with no space waste
* Easy to operate and maintain ,operation by one person
* Saving power and uneasy to worn out
* Adopting new double crank four bars to lock mould, the cross fixed
* Providing high pressure blowing system
* Container:
o Product material: PET, PP, PE
o Volume L: 10-25L (3-5 gallon)
o Theoretical output: 90 to 180 pieces/h
o Preform inner diameter: 15 to 200mm
* Moulding:
o Max mould plate dimensions (L x W): 420 x 500mm
o Max.mould thickness: 40 mm
o Clamping force: 330KN
o Mould opening stroke: 38mm
* Machine size and weight:
o Main machine (L x W x H): 218 x 77 x 196cm
o Main machine weight 1,000kg
o Heater (L x W x H): 237 x 68 x 165cm
o Heater weight: 380kg
* Power: 40kW
Offer pet bottle blowing machine high quality, advanced technical, high speed, easy operation for water,
beverage fruit packing. Also mould, injection machine, preform, cap, auxiliary machine available.
762 Coir Machinery Suppliers
Short on time? Let Coir Machinery sellers contact you.
