Injection mold is one of our main businesses, mdc specialties in all kinds of injection molds. Our plastic injection molding can from most plastics including pp / abs / pc /pa & pa+glass fiber/ pbt / pom and so on.
The upper die lip adopt manual full push flexible fine-tuning /manual push & pull fine-tuning is meeting different product thickness. The die width adjustment is external block type and hook type .The die width is up to 8000 mm
With special coathanger channel design, 90 degree chock bar on the upper die lip ,the lower die lip can change with adjusts the thickness from 2-30mm.
Product Width Below 3000 mm.
Application: Covering almost all polymers such as PP, PE, PC, PMMA, EVA, ABS, PS, PA, PVC, etc.
Product application: Widely used in Electrical appliances, construction, chemical industry, light boxes, advertising decoration, etc.
1.Surface layer percentage can be as low as 8%
2.Suitable for different melt point raw material co - extrusion,the max temperature difference can reach 80 (Esoecially suitable for process temperatures differ by more than 20 multilayer coextrusion )
3.Independent temperature control in every layer ,with heat insulation device. 4.With special flow channel design to reduce the edge cutting ,thus to reduce the scraps .
36 Dies Mouldings Suppliers
Short on time? Let Dies Mouldings sellers contact you.
WHY CHOOSE US?
22 years experience in development preform molds, bottle cap mold, bottle blowing mold. 300 employees and 5 years experienced salesperson, sincerely service for you.
We are able to provide shut off nozzle perform mold/ selflock perform mold. Light weight perform mould.
WHY CHOOSE US?
22years experience in development preform molds, bottle cap mold, bottle blowing mold. 300 employees and 5 years experienced salesperson, sincerely service for you.
We are able to provide hot runner cap mould and cold runner cap mould.
Usage for products
Plastic film/ sheet TPU / CPP / CPE / PP / PE / PVC / EVA / / LDPE / HDPE / BOPP / PVB /PC
Film thickness
0.01-0.2mm
Die width
300mm-8000mm or per your request
Die material
2738 from Germany/S316/718/5Crnimo/P20
Lips adjustment system
1.Manual full push flexible fine-turning
2.Automatic full push flexible fine-turning
3.Manual push & pull fine-turning
4.Automatic push & pull fine-turning
Screws
High strength at 12.9 grade
Polishing
Lips and surface of flowing: 0.02-0.03(μm),Other surfaces: 0.03-0.04(μm).
Chrome thickness:
0.035-0.045mm
Surface hardness:
60-70HR
Feeding type:
Round or square or special
Usage for products
Plastic film TPU / CPP / CPE / PP / PE / PVC / EVA / / LDPE / HDPE / BOPP / PVB /PC
Film thickness
0.01-0.2mm
Die width
300mm-8000mm or per your request
Die material
2738 from Germany/S316/718/5Crnimo/P20
Lips adjustment system
1.Manual full push flexible fine-turning
2.Automatic full push flexible fine-turning
3.Manual push & pull fine-turning
4.Automatic push & pull fine-turning
Screws
High strength at 12.9 grade
Polishing
Lips and surface of flowing: 0.02-0.03(μm),Other surfaces: 0.03-0.04(μm).
Chrome thickness:
0.035-0.045mm
Surface hardness:
60-70HR
Feeding type:
Round or square or special
Usage for products
Plastic film TPU / CPP / CPE / PP / PE / PVC / EVA / / LDPE / HDPE / BOPP / PVB /PC
Film thickness
0.01-0.2mm
Die width
300mm-8000mm or per your request
Die material
2738 from Germany/S316/718/5Crnimo/P20
Lips adjustment system
1.Manual full push flexible fine-turning
2.Automatic full push flexible fine-turning
3.Manual push & pull fine-turning
4.Automatic push & pull fine-turning
Screws
High strength at 12.9 grade
Polishing
Lips and surface of flowing: 0.02-0.03(μm),Other surfaces: 0.03-0.04(μm).
Chrome thickness:
0.035-0.045mm
Surface hardness:
60-70HR
Feeding type:
Round or square or special
Name: Changeable back insert Plastic Arm Chair Mold We provide the chair mold with changeable back insert, so you can have different kind of chairs in one mold. It can also save your cost on the mold, to maximize your profits. It will be our pleasure to be your mold supplier, any request on the…
Name: plastic light arm chair mold Chair molds is our main products, we have rich experience on the mold making, sample delivery for free, we will do our best to satisfied you and your customer. FAQ 1. ARE YOU A FACTORY OR TRADING COMPANY? We are a factory. 2. WHERE IS YOUR FACTORY LOCATED? Our…
Name: plastic folding chair flux chair mold The folding chair is more sturdy and comfortable than metal folding chairs. This chair provides attractive seating for indoor and ourdoor events. In addition, the chair is UV protected allows colors to stay bright and attractive in the sun. Master mold...
Name: Plastic Chaise Loungers Mold Why choose us? 1.Offer best service to meet your requirements during mould processing. 2.Strict quality control to save cost for you. 3.Good after-sale service and provide technical support. 4.More than 20 years experience in making moulds 5.Regular customer...
Name: Beach Chair Mold Master Mold have supplier include YUDO hot runner, LKM mold base, HOSCO etc. We can develop, manufacture and test mould independently, with good suppliers support, we do our best to provide the high quality molds. Master Workshop Master CNC Machines The Order Process Mold…
Name: Outdoor Sofa Set Mold Furniture Sofa Mould Specifications: 1. Good after-sale service 2. Good quality plastic Mould 3. Competitive price 4. Punctual delivery time 5. High precision 6. Specialized in making plastic injection mould. Our workers are fully qualified and skilled at using modern...
Mould Name Audi A5 Car Front Bumper Mould
Material PP+EPDM(Contraction: 1, 5%)
Bumper Size 1800*510*460mm
Steel For Cavity &. Core P20
Mould Base C45
NOs. of Cavity 1*1
Injection System Yudo 5 direct injection gates
Ejection System Ejector pins, angle lifters
Mould Standard OEM/HASCO
Mould Estimated Size 2250 x 900 x 1050mm
Precision Crafted Excellence: Unveiling the 2009 Audi A5 Front Bumper Mould
Our Advantage:
1.We have developed about 1000 PCS bumper mould since we founded.
2.Our company's mould structure is more reasonable and our bumpers are optimized.The mould we developed with a lower cost can produce the same or better product .
3.Fast production speed,high efficiency.Our delivery time is 30% shorter comparing to other suppliers
4.Our product design concept is to reduce the use of oil cylinder, by using mould mechanical structure to return, so as to improve production efficiency. According to our current design, the production speed can be increased by 30%.
5.Our company emphasize the high precision and tight tolerances of the mould.which are crucial for maintaining consistency and quality in the molded bumpers.
Extrusion lamination coating die , sheet die, film die , stretch film die , automatic die, air bubble film die , pet sheet die , rigid pvc sheet die, fast open lip sheet die.
