Metal cutting fluid In actual production, even high-quality metal cutting fluids must be added with a certain amount of bactericidal and algae-removing agents to extend the service life and increase the utilization rate. PSC80626, whether used as a metal cutting fluid additive, a settling agent or a water-based cutting fluid, can accelerate the sedimentation of metal chips, accelerate the separation of water and oil in the cutting fluid, effectively reduce the growth of bacteria, and extend the life of the metal cutting fluid. PSC80626 is used in fully synthetic metal cutting fluids for water machines, and the amount is very small, and the additive formula can be adjusted flexibly. As a settling agent, it is basically consistent with Buckman's Busan 77 in terms of theoretical map test data, which can completely replace this type of product and has a significant effect in actual use.
Product description
Type: Acrylic emulsion elastomer wall covering facade paint, matt.
Flugger Facade 25 is based on acrylic binder with high performance. It provides a weather-resistant, elastic, crack bridging and robust surface.
The surface is permeable for water vapour, with a high barrier effect against CO2 and chlorides, which makes it suitable as concrete protection especially in urban environments.
Protects the surface against formation of mould.
The opacity of tinted colours is indicated on the tinting label.
Product application
Suitable exterior for finishing treatment on facades of concrete, masonry and plaster etc.
Product description
Type: Latex wall paint, based on acrylic binder, matt.
Flutex 10 provides a beautiful finish with a soft gloss. The product is easy to apply and to repaint, and it provides a robust and washable surface that stands spot
cleaning.
The opacity of tinted colours is indicated on the tinting label.
Product description
Type: Acrylic emulsion primer.
Flugger Sealer is formulated with an acrylic micro-dispersed binder with
unique penetration properties.
Is alkaline resistant and provides an efficient sealing on slightly chalking
and absorbent surface.
Product application
Suitable for interior priming of building materials, e.g. gypsum board, light concrete, limestone, brick, plaster, cement fibre plates, concrete as well as fillers.
Technical data
Density: 1,01 kg/litre
Solids: Weight%: 14 Vol.%: 13
Spreading rate: 3-7 m2per litre depending on the substrate
Application temp.: Min. working temperature during application
and drying/curing: + 10¡æ
Max atmospheric humidity 80 % RH
Drying time at 20¡æ, 60% RH: Dry to touch: 1 h
Recoat interval: 6 h
Fully cured: Several days
Dilution: Water
Cleaning of tools etc.: Water
Storage: Cool, frost-free and tightly closed.
Product properties
Flugger 377 Adhesive roll-on is a PVA-reinforced adhesive, which is transparent when dry.
Application
For interior hanging of light glass tissues and glass felt. Also suitable for the hanging of light, paper-backed textile wall coverings and for non-woven wall coverings. Also suitable for the hanging of Flugger Structure.
Only for use in dry rooms.
Technical data
Type: Adhesive for tissue wall coverings
Density: 1.02 kg/litre
Solids: Weight%: 19 Vol.%: 16
Spreading rate: 4-5 m?per litre
Application temp.: Min. +150C
Cleaning of tools: Immediately with hot water and soap
Storage: Cool, frost-free and tightly closed.
3L & 5L & 12L
80 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
WX618 Water Base transformation anti-rust priming paintis an advanced product at the international technique level, and it is applicable to the corrosion resistance treatment of the rusted steel parts. It is widely used to the manufacture and maintenance of the equipment in use such as steel structure, tunnel and bridge, establishment of city construction, high-speed road, railway,ship,shipside, petroleum, metallurgy, chemical engineering and so on. It can serve as priming paint treatment with anti-rusting and rust-inhibitoring before painting. It can be used as the paint with anti-rusting and rust inhibitoring alone,too. It possesses excellent corrosion resistence effect and can be combined with kinds of surface and middle paints on the market. Product mechanism: all are anti-rust primer on the market now is to only cover the rust physically. That is to remove the rust by the sand blasting, then coat the surface with anti-rust primer with old technology. This traditional craft can cause the problems posed are:
Its only the effect of physically cover on the rust and it can never reach the role as descripted on the specification
But WX618 water-based rust transformation primer has chemical reaction with the rust. After 20 minutes of the process, the rust turns into black primer. That is rust is part of the raw materials during this chemical reaction. This primer and the hydrogen bonding interaction between the iron material is the largest. The effect can never be reached by the physically covery as other old primer.
Product Advantage of WX-618:
1. The product has sound antirust effect. After coated once or twice, and combined with appropriate surface paints, the surface will not rust against for 10 years longer under nature condition.
2. The material can be operated with rust, replacing conventional processes of manual sandblstering, anti-rusting and rust-inhibitor priming paint. It can save the cost for rust removing and improving the operating efficiency remarkably
3. This product is water base and without harmful substances such as benzene, formaldehyde. The VOC of this product is quite low. It will not bring out powder, dust and smell. This product is good for environmental protection.
4. Operation is convenient; roller, brushing and coating all are applicable
5. It is applied to the complicated corrosion resistance treatment of rusted steel parts, avoiding the remnants of acid liquid in the conventional acid washing method
6. It has the fire resistance
Use Method:
Paint the rusted iron with WX-618 with brush or spray. After 20 min, the rust turns to black primer. The whole process is just so easy
Acrylic Emulsion all-around paint provides a weather-resistant and robust surface. High water vapour permeability, with a high barrier effect against CO2 and chlorides which makes it suitable as conrete protection especiallly in urban environments. protects the surface against formation of mould. Suitable exterior as topcoat on facades of concrete, masonry and plaster etc. Also suitable interior, where a matt, ribust surface that does not furbish up(changed gloss) by touching is desired.
Suitable: Interior/Exterior
Thinner: Water
Spreading rade mm/liter and treatment: 8-10
Gloss 60: 5 matt
Water vapour permeability 1,2GPa s mm/kg at 100um
SECrosslink-3010 single component, low temperature rapid curing, low surface resistance, mainly used in circuit board packaging, composite material shell, plastic shell, aircraft body electromagnetic wave shielding, suitable for jet and screen printing process.
Brand SECrosslink Type SECrosslink-3010
Product name EMI Electrically Conductive coating Appearance Silver gray
Resin types Acrylate Application Electromagnetic wave shield of circuit board package, composite shell, plastic shell, aircraft body
Adhesive force excellent Volume resistivity 75 DB
Introduction
Pure Zinc & Zn/5Al are excellent material choices for corrosion protection in both atmospheric and marine environments. Using either the electric arc spray or combustion wire process, wire coatings of these materials
act as sacrificial anodes, galvanically protecting iron or steel substrates.Decades of field work using these coatings has clearly demonstrated that they are far more effective and longerlasting than hot dip galvanizing.
Coatings of ZnAl often have better corrosion resistance than either pure zinc or aluminum, by combining the advantages of both materials. This is particularly true in areas where crevices exist and residual moisture and contamination is present, and in areas where the coating has been scratched or scraped, resulting in coating voids and exposed substrate.
Using the electric arc spray process, coatings of these materials are often used in the electronics industry for EMI and RF shielding, or as conductive coatings on capacitors.
Typical Uses and Applications
Atmospheric and immersion corrosion protection on large steel or iron structures such as bridges, roadway
barriers, posts and poles, offshore structures and marine structures.
Atmospheric corrosion protection on steel or iron components such as tanks and gas bottles
EMI and RF shielding on plastic components (electric arc spray only)
Electrical conductance on components such as the Conductive areas on insulators and capacitor end caps
Product Details
Chemical composition:
Type Chemical composition
Zn Al Others
Zn 99.9+ Balance
0.1
Zn 15Al Balance 15
Standard Sizes & Packing:
Diameter Packing Wire Weight
1/16 (1.6mm) D 300 Spool 15kg((33 lb)/spool
Other sizes can produced based on customers' requirement.
