Product description
Type: Acrylic emulsion elastomer wall covering facade paint, matt.
Flugger Facade 25 is based on acrylic binder with high performance. It provides a weather-resistant, elastic, crack bridging and robust surface.
The surface is permeable for water vapour, with a high barrier effect against CO2 and chlorides, which makes it suitable as concrete protection especially in urban environments.
Protects the surface against formation of mould.
The opacity of tinted colours is indicated on the tinting label.
Product application
Suitable exterior for finishing treatment on facades of concrete, masonry and plaster etc.
Product description
Type: Latex wall paint, based on acrylic binder, matt.
Flutex 10 provides a beautiful finish with a soft gloss. The product is easy to apply and to repaint, and it provides a robust and washable surface that stands spot
cleaning.
The opacity of tinted colours is indicated on the tinting label.
Product description
Type: Acrylic emulsion primer.
Flugger Sealer is formulated with an acrylic micro-dispersed binder with
unique penetration properties.
Is alkaline resistant and provides an efficient sealing on slightly chalking
and absorbent surface.
Product application
Suitable for interior priming of building materials, e.g. gypsum board, light concrete, limestone, brick, plaster, cement fibre plates, concrete as well as fillers.
Technical data
Density: 1,01 kg/litre
Solids: Weight%: 14 Vol.%: 13
Spreading rate: 3-7 m2per litre depending on the substrate
Application temp.: Min. working temperature during application
and drying/curing: + 10¡æ
Max atmospheric humidity 80 % RH
Drying time at 20¡æ, 60% RH: Dry to touch: 1 h
Recoat interval: 6 h
Fully cured: Several days
Dilution: Water
Cleaning of tools etc.: Water
Storage: Cool, frost-free and tightly closed.
Product properties
Flugger 377 Adhesive roll-on is a PVA-reinforced adhesive, which is transparent when dry.
Application
For interior hanging of light glass tissues and glass felt. Also suitable for the hanging of light, paper-backed textile wall coverings and for non-woven wall coverings. Also suitable for the hanging of Flugger Structure.
Only for use in dry rooms.
Technical data
Type: Adhesive for tissue wall coverings
Density: 1.02 kg/litre
Solids: Weight%: 19 Vol.%: 16
Spreading rate: 4-5 m?per litre
Application temp.: Min. +150C
Cleaning of tools: Immediately with hot water and soap
Storage: Cool, frost-free and tightly closed.
adhesive water based is a process of pressing two or more materials together to create a new material. This is done to create a material that addresses specific application requirements. Laminating adhesives are used to manufacture toilet paper with new functions by bonding different tissue together, we have all kind of water-based glue such as for cardboard, cellophane glue, wood and etc...
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Hot melt glue, also known as hot melt adhesive (HMA), is a thermoplastic adhesive that is widely used for various applications due to its strong bonding capabilities and quick setting time.
Please contact for prices.
Water Based Coatings
- Primers, Gloss & High Scuff
- High Gloss/High Slip
- Duct Gloss & Matt
- Specialty Coatings
- Soft Feel / Satin / Neutral / Super Matt
