Find Verified Silicon Sheets Suppliers, Manufacturers and Wholesalers

Solid Silicone Sheet/ Silicone Rubber Sheet materials are inventoried by Seashore Manufacturing Limited from 0.5mm to 20mm thick and 30 to 70 durometer(hardness) Shore A.

Our Solid silicone sheeting continues to grow and is available in four standard colours white, translucent, red oxide and black.

The dimensions for silicon rubber sheet of our stock stardard is in the following:

500mmx500mmx0.5mm
800mmx800mmx1.0mm
1000mmx1000mmx1.5mm

1000mmx10mx from 1mm to 20mm
1200mmx10mx from 1mm to 20mm
1500mmx10mx from 1mm to 5mm
1800mmx10mx from 1mm to 5mm
2000mmx10mx from 1mm to 5mm

The specification of most standard silicone sheet we produce are as below:

Density:1.25 g/cm3
Handness:55 Shore A
Tensile strength:7.0 mpa
Elongation at Breakage:320%
Tension Set:8%
Tear Strength:20 KN/M
Heat Resistant: 200 C

Sizes Thinkness tolerance(+/-mm)

10mx1m or 1.2mx1mm 0.1
10mx1m or 1.2mx2 to 6mm 0.2
10mx1m or 1.2mx7 to 10mm 0.3

The above is silicone rubber sheet standard at Shore A Hardness 40,50,60. Other sizes, colours and hardnesses are available on request.

Beside standard ones,we supply FDA food grade silicone sheet,anti-static silicone sheet,anti-acid silicone sheet.
Special silicone sheet is use of wood/chipboard laminating,glass industrial,solar industrial.

Our Solid silicone rubber sheet is 200 degree centigrade temperature resistant as standard,but we also can do high temperature resistant up to 270 degree centigrade.
Sponge Silicone Rubber Sheet
100% closed cell Silicone Rubber material,double sides fabric impression or smooth finished.

Our sponge silicone sheeting is available in four standard colours white, red oxide,black.

The dimensions for sponge silicon rubber sheet of our stock stardard is in the following:

1000mmx1000mx from 3mm to 20mm
2000mmx1000mx from 3mm to 20mm
5000mmx1000mx from 3mm to 20mm

The above is sponge silicone sheet standard at Shore A Hardness 10,20,30. Other sizes, colours and hardnesses are available on request.

Our sponge silicone rubber sheet is 200 degree centigrade temperature resistant as standard.

Sponge silicon rubber sheet material is readily fabricated into gaskets and cushioning pads.

SBR Rubber sheet
SBR Rubber has properties similar to Natural Rubber. It has good abrasion resistance, excellent impact strength, very good resilience and a high tensile strength.

Applications:
SBR can be compounded for use as lining rubber, conveyor belt covers and other extremely demanding applications.

Size:
1000mmx1000mmx1mm to 50mm
1200mmx1200mmx1mm to 50mm
1000mmx10mx from 1mm to 25mm
1200mmx10mx from 1mm to 25mm
1500mmx10mx from 1mm to 20mm
1800mmx10mx from 2mm to 20mm
2000mmx10mx from 2mm to 20mm

Finish:Smoothly finished or both side fabrics impress on finished.
Insertion:common cloth insertion or nylon fabric insertion
Color available is black,red,white,blue,green etc.

TYPICAL PHYSICAL PROPERTIES AND VALUES:

Hardness, Shore A +/-5 60
Specific Gravity (DENSITY) 1.6g/cm3
Tensile Strength 3mpa
Enlongation Break 250%
Heat Aging(70 Cx72hours)
Tensile Strength Change 20%
Elongation Break 25%.

Other specifications we can produce per your request.

Neoprene Rubber sheet

Neoprene Rubber sheet is a preferable choice of rubber sheeting when exposed to the weather. This product also has a moderate resistance to petroleum based fluids. Neoprene Rubber sheeting is used for many applications, including gasket making, matting, baffles & bumper strips.

We currently supply below sizes as stardard for your selecting:

1000mmx1000mmx1mm to 50mm
1200mmx1200mmx1mm to 50mm
1000mmx10mx from 1mm to 25mm
1200mmx10mx from 1mm to 25mm
1500mmx10mx from 1mm to 20mm
1800mmx10mx from 2mm to 20mm
2000mmx10mx from 2mm to 20mm

Color available is black,red,white,blue,green etc.

TYPICAL PHYSICAL PROPERTIES AND VALUES:

Hardness, Shore A +/-5 65
Specific Gravity (DENSITY) 1.5g/cm3
Tensile Strength 4mpa
Enlongation Break 250%
Compression set maximum 20%
Heat Aging(70 Cx72hours)
Tensile Strength Change 20%
Elongation Break Change 25%
Handness Change 15%.

Other specifications we can produce per your request.


Neoprene Fabric reinforced sheets are fabric or cord fabric inserted and fabric surface finished

Our capabilities:

Peroxide and platinum cured polymers, both of which can meet food quality requirements.
Hardness range: 35-85 Shore A

Colours available:

Translucent
White
Black
Grey
Red oxide
Bright red
Green
Yellow
Blue

Colour matching available on request.
Drawings:

Please click following links for the drawings of our stocked silicone extrusion profiles.

drawing 1 to 4.
drawing 5 to 8.
drawing 9 to 12.
drawing 13 to 15

Temperature resistance:

-50 to +260 Degrees Centigrade (up to 300C for short periods)

Sizes available:

Flat strips are available in continuous lengths up to 80mm wide. Minimum thickness 0.5mm.
Cords and tubes are available up to 60mm Diameter. Minimum tube ID is 1mm

Joining:

Most profiles can be joined to form endless seals.
Hollow and solid O rings are available in a wide range of sizes.
Most profiles can be joined to any required angle to form (for example) rectangular gaskets.

Insertion rubber sheet
General Insertion rubber sheet is manufacturing by SBR rubber material and Natural rubber material compounded.However,we also can put insertion into Neoprene rubber sheet and EPDM rubber sheet.Our insertion rubber are including general PE100 insertion rubber sheet and nylon insertion reinfore rubber sheet.

It have good resistant to aging and temperature.They are widly using in industrial,mine,from decorative to rubber rolling flooring runners etc.Further more,this rubber sheet can be provessed into die cut parts,strips or pads.

Thickness range from 1mm to 50mm.

Width available are 1m to 2m or cutting to other width according to your requirement.

Smoothly glossy finish or both side fabrics impress on finish. Continuous length.

Silicone Sheet

Durable seaworthy packing