SBR Rubber sheet
SBR Rubber has properties similar to Natural Rubber. It has good abrasion resistance, excellent impact strength, very good resilience and a high tensile strength.
Applications:
SBR can be compounded for use as lining rubber, conveyor belt covers and other extremely demanding applications.
Size:
1000mmx1000mmx1mm to 50mm
1200mmx1200mmx1mm to 50mm
1000mmx10mx from 1mm to 25mm
1200mmx10mx from 1mm to 25mm
1500mmx10mx from 1mm to 20mm
1800mmx10mx from 2mm to 20mm
2000mmx10mx from 2mm to 20mm
Finish:Smoothly finished or both side fabrics impress on finished.
Insertion:common cloth insertion or nylon fabric insertion
Color available is black,red,white,blue,green etc.
Neoprene Rubber sheet is a preferable choice of rubber sheeting when exposed to the weather. This product also has a moderate resistance to petroleum based fluids. Neoprene Rubber sheeting is used for many applications, including gasket making, matting, baffles & bumper strips.
We currently supply below sizes as stardard for your selecting:
1000mmx1000mmx1mm to 50mm
1200mmx1200mmx1mm to 50mm
1000mmx10mx from 1mm to 25mm
1200mmx10mx from 1mm to 25mm
1500mmx10mx from 1mm to 20mm
1800mmx10mx from 2mm to 20mm
2000mmx10mx from 2mm to 20mm
Color available is black,red,white,blue,green etc.
TYPICAL PHYSICAL PROPERTIES AND VALUES:
Hardness, Shore A +/-5 65
Specific Gravity (DENSITY) 1.5g/cm3
Tensile Strength 4mpa
Enlongation Break 250%
Compression set maximum 20%
Heat Aging(70 Cx72hours)
Tensile Strength Change 20%
Elongation Break Change 25%
Handness Change 15%.
Other specifications we can produce per your request.
Neoprene Fabric reinforced sheets are fabric or cord fabric inserted and fabric surface finished
Insertion rubber sheet
General Insertion rubber sheet is manufacturing by SBR rubber material and Natural rubber material compounded.However,we also can put insertion into Neoprene rubber sheet and EPDM rubber sheet.Our insertion rubber are including general PE100 insertion rubber sheet and nylon insertion reinfore rubber sheet.
It have good resistant to aging and temperature.They are widly using in industrial,mine,from decorative to rubber rolling flooring runners etc.Further more,this rubber sheet can be provessed into die cut parts,strips or pads.
Thickness range from 1mm to 50mm.
Width available are 1m to 2m or cutting to other width according to your requirement.
Smoothly glossy finish or both side fabrics impress on finish. Continuous length.
Peroxide and platinum cured polymers, both of which can meet food quality requirements.
Hardness range: 35-85 Shore A
Colours available:
Translucent
White
Black
Grey
Red oxide
Bright red
Green
Yellow
Blue
Colour matching available on request.
Drawings:
Please click following links for the drawings of our stocked silicone extrusion profiles.
drawing 1 to 4.
drawing 5 to 8.
drawing 9 to 12.
drawing 13 to 15
Temperature resistance:
-50 to +260 Degrees Centigrade (up to 300C for short periods)
Sizes available:
Flat strips are available in continuous lengths up to 80mm wide. Minimum thickness 0.5mm.
Cords and tubes are available up to 60mm Diameter. Minimum tube ID is 1mm
Joining:
Most profiles can be joined to form endless seals.
Hollow and solid O rings are available in a wide range of sizes.
Most profiles can be joined to any required angle to form (for example) rectangular gaskets.
Solid Silicone Sheet/ Silicone Rubber Sheet materials are inventoried by Seashore Manufacturing Limited from 0.5mm to 20mm thick and 30 to 70 durometer(hardness) Shore A.
Our Solid silicone sheeting continues to grow and is available in four standard colours white, translucent, red oxide and black.
The dimensions for silicon rubber sheet of our stock stardard is in the following:
1000mmx10mx from 1mm to 20mm
1200mmx10mx from 1mm to 20mm
1500mmx10mx from 1mm to 5mm
1800mmx10mx from 1mm to 5mm
2000mmx10mx from 1mm to 5mm
The specification of most standard silicone sheet we produce are as below:
Density:1.25 g/cm3
Handness:55 Shore A
Tensile strength:7.0 mpa
Elongation at Breakage:320%
Tension Set:8%
Tear Strength:20 KN/M
Heat Resistant: 200 C
Sizes Thinkness tolerance(+/-mm)
10mx1m or 1.2mx1mm 0.1
10mx1m or 1.2mx2 to 6mm 0.2
10mx1m or 1.2mx7 to 10mm 0.3
The above is silicone rubber sheet standard at Shore A Hardness 40,50,60. Other sizes, colours and hardnesses are available on request.
Beside standard ones,we supply FDA food grade silicone sheet,anti-static silicone sheet,anti-acid silicone sheet.
Special silicone sheet is use of wood/chipboard laminating,glass industrial,solar industrial.
Our Solid silicone rubber sheet is 200 degree centigrade temperature resistant as standard,but we also can do high temperature resistant up to 270 degree centigrade.
Sponge Silicone Rubber Sheet
100% closed cell Silicone Rubber material,double sides fabric impression or smooth finished.
Our sponge silicone sheeting is available in four standard colours white, red oxide,black.
The dimensions for sponge silicon rubber sheet of our stock stardard is in the following:
1000mmx1000mx from 3mm to 20mm
2000mmx1000mx from 3mm to 20mm
5000mmx1000mx from 3mm to 20mm
The above is sponge silicone sheet standard at Shore A Hardness 10,20,30. Other sizes, colours and hardnesses are available on request.
Our sponge silicone rubber sheet is 200 degree centigrade temperature resistant as standard.
Sponge silicon rubber sheet material is readily fabricated into gaskets and cushioning pads.
High Quality Transparent Molded Silicone Rubber for Kitchen Ware and all kinds of molded silicone products.
Description
GFD2071P series is fume type general purpose silicone rubber with shore A hardness 30,40,50,60,70,and 80.These products are suitable for compression molding and extruding.
Features
Excellent process ability
Excellent mechanical and electrical properties
High tensile strength
FDA & FLGB grade
Applications
Kitchenware, bakeware
Skin cover for mobile devices
Tubes, sealing
Honeywon»s silicone sponge is with high grade silicone rubber material and inimitable technique, with
Good character of high temperature resistant, aging resistant, ozone resistant, insulation property, fuel
Oil resistance, lubes resistance, no smell and wear well. High compressibility and low compression set
Over a wide temperature range, and good acoustic and thermal insulation properties. Apply to -50µ
~+200µ protect and heat insulation for long term continuous use and -70µ ~ +260µ for intermittent
Use on all kinds of machine.
Special size(mm)+minimum length:no limitation maximum length:no limitation, or in roll
Minimum width:no limitation maximum width:1200 minimum thickness:3.0 maximum
Thickness:30.0
Product color+ red¼grey¼natural, white¼black or any other required color
Application+ heat transfer print equipment, electronics and electrics, machine and sealcharacter+high temperature resistant, aging resistant, ozone resistant, insulation property, fuel oil
Resistance, lubes resistance, no smell and wear well, good acoustic and thermal insulation properties.
+ technical index¦
Style¦ open cell
Surface¦double fabric impression
Tear strength¦55kn/m
Press strength+30mpa
Elongation¦100%
Hardness¦8-50 shore a
Temperature range¦-50-220c continuously; -70µ ~ +260µ for intermittent use
Density¦0.55-0.9g/cm3
Flame resistance¦94v-0
Dielectric breakdown voltage¦>3kv
Dielectric constant¦5.5 khz
Tensile strength: 10-30psi
Volume resistance¦1.*1011 ohm-m
Thermal conductivity¦0.1 w/m-k
Thick tolerance: a0.05mm~0.1mm
Specification(sheets or rolls):
A. Sheets: 500*500*0.7-1mm
B. Sheets or rolls: 500*1.5mm above
C. Sheets or rolls: 1000*2mm above
D. Sheets or rolls: 914.4*2mm above
E. Sheets or rolls: 1200*2mm above.
F. Sheets or rolls: 1500*2mm to 10mm
Conforms to the national profession standard: hg/t2949
