Find Verified Cnc Machines Spare Parts Suppliers, Manufacturers and Wholesalers

Smart Angle®Cuttingï¼?ï¼?most advanced 5 Axis Waterjet
The Smart Angle is a cutting system that tilts the cutting head to produce more accurate parts as higher cutting speeds.

Its revolutionary design provides a better way to correct two common drawbacks to abrasivejet cutting taper and inside corner kickback.

Slowing down the cutting speed used to be the best way to reduce these effects,the Smart Angle cutting head provides a better way.Tilting the head removes the taper from one side of the cut,leaving a vertical cut on the side of the part.

The wrist assembly is powered by two servo-driven actuators,which allow two more axis of movement(A & B)

S&A CW-5000 water chiller for cooling dental CNC engraving machine
Industrial water chiller model CW-5000 is produced by Guangzhou Teyu Electromechanical Co., Ltd.
Integrity, Pragmatic and Enterprising are TEYU core values. They make us always adhere to Quality First on our design and production concepts. Our brands"S&A" and "TEYU" have gained approval and trust from thousands of manufacturer at home and abroad which enables our product export rate maintained at over 60% in long-term. Our product application is diversified and our shipment of laser cooling system has ranked the first in the world.
CW-5000 chiller is widely applied for cooling dental CNC engraving machine.
S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity and the temperature control in ±0.3â?? precision. Itâ??s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted.
It is popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm.
CW-5000 video: http://www.teyuchiller.com/Article/02SAwaterchillerCW5000_1.html
CW-5000 water chiller parameter:
Voltage:110V-220V; Frequency: 50/60Hz; Refrigerant: R-134a
Pump power: 0.03KW/0.051KW/0.1KW; Tank capacity:6L
Max. lift:10M-25M; Max. flow: 10L/min- 16L/min
N.W: 24Kgs; G.W: 27Kgs; Dimension : 58 X 29 X 47 cm (L X W X H); Packing dimension: 70 X 43 X 58 cm (L X W X H)
About S&A Brand
S&A(TEYU) was founded in 2002. After 15 years of development, the headquarter covers an area of 18,000 square meters, and has about 250 employees.
Why choose S&A
Product Advantages:1. With 11 patent certificatesï¼?CE, RoHS and REACH approval; Conforms to air transport requirements; 2 years warrenty
2.±0.1â?? high precision temperature control, stable cooling performance,support ModBus-485 communication;
3. Establish logistic warehouses at USA and Europe;
Manufacturing Advantages:1.Independent R&D on sheet metal, evaporator, condenser and cores parts of chiller;
2. Anual ouput 60,000 units,product exports rate above 60%ï¼?
3. Standard bulk production,standard parts rate up to 80% ï¼?
4. With excellent laboratory testing system, simulates actual working environment for chiller.

Function&features:
Metaltailor created the technique of cleaning slotting scrapiron automaticlly , which greatly saves human labour and insure their safety.
Slotting can be finished at a time , using hydraulic drive
Visual slotting software is much more humanized
Reminding and calcuiating materials residual automatically
According to fonts, chose retative and absolute slotting slyle, which help to save the sheels
Bender matching to plasma cutting machine , realize metal-letter working machanization

GSK988T is a new CNC controller for slant bed CNC lathe and turning center, adopt micro processor of 400MHz high 0.0001mm is selected.

Ldb4, ld4b, wd6, jld6 series 4 station and 6 station tool post(turret) from cncmakers limited.

Changing tool without lifting the disc, non-contact transmitter, three gear-teeth location, lifting screw threads-clamping, besides the advantages of ldb4, it has the better-sealing. It is more suitable for all kinds of
Lathes whose grades is higher than c0625.

Jld6 6-station horizontal electric tool post adopts the working principle of worm wheel and worm driver, front and rear fluted disc locking, it features dependable and steady transposition, short time of changing position, big tangential torque, multi-position tool carrier. The transposition and transmitting adopt dependable contactless hall component with long service life, the series tool post is an ideal product to process complicated parts.
Non-contact transmitter, teeth location, cam clmping, compact in structure, reliable light. It is more suitable for all kinds of lathes whose grades is higher than c6140.

The functions like PID inside, 16 steps of speed control and simple PLC can Meet different application needs Users can choose PC or PLC to control the upper computer by RS485 Communication interface with MODUS RTU ASCII protocol inside

Technology Features
I/O characteristics
Rated Input Voltage Range: 380V/220V 15%
Rated Input Frequency Range: 47~63Hz
Rated Output Voltage Range: 0~Rated Input Voltage
Rated Output Frequency: 0~650Hz
Peripheral Interface Characteristics
Programmable Digital Input: 6 input channels
Open Collector Output: Provide 1 output channel
Provide 1 output channel )
Analog Output: Provide 2 output channels:
FM Terminal: 0/4~20mA or 0~10V
AM Terminal: 0 ~10V
( notice: 7.5KW and below only provide FM terminal )
Channel: 0~50 kHz
Control Characteristics

Communication setting, PID setting, etc.

8-frequency inverter, frequency converter, vector control, ac drive
9-4 6 8 station tool post, nc turret, power turret, tool changer, tool carriage.
10-retrofitting consultant & cnc tech support.

Set(s)

1000tii from cncmakers limited, is a superior turning machine cnc system with high performance 32-bit microprocessor, new structure design and open plc process. It is employed with 8.4 inch color lcd display. It can control 4 feeding axes, 4 simultaneously controlled axes. It can be matched with sd or yaskawa digital ac servo driver. 1000tii is suitable for full function cnc turning machine.


1)adopt 32-bits powerful cpu to achieve high-speed, high-precision control. The maximum speed reaches up to 30 m/min

2)7.5/8.4 inch tft lcd with the resolution of 640¡á480.

3)six layer main board applying custom-build fpga, high integration technology, perfect structure design ensures that the

System has high reliability and high anti-interface capability.

4)support the open-style plc function to meet the secondary development of the machine tool builder.

5)two types of machine control panels including the standard panel with film-buttons and one with pushed buttons are available.

On the later one the functions of the 50 pushed buttons and 50 lamps are able to defined by customs.

6)remote i/o modules based on can bus can be use to extend the number of i/o points up to 512/512.

7)english operation interface and full help information make the operation more conveniently.

8)perfect self-diagnosis function. Display the internal and external states in real time and alarms will be issued timely when some abnormity happen.

9)powerful instruction execution ability to achieve the high-speed, small-line-section machining

10)640 kb internal program memory space. U-disk port can be use to extend the space of program and to perform dnc machining.

11)rich nc functions: macro program b, rigid tapping, local coordinate system, coordinate system rotation, coordinate scaling, polar coordinate system, etc.

Cartons

CNCmakers Limited - Professional manufacturer and supplier of CNC Retrofit Kits for CNC lathes, milling machines and machining centers.

CNC Retrofit Kits includes: CNC control system, AC servo motor and drivers, AC servo spindle motor and drivers, Frequency inverters, step motor and drivers, 4 station tool posts, NC turrets, external MPG, pendants, other CNC related accessories, etc.

Main products and service:
1-CNC Control kits for retrofitting lathe/milling machine/machining center.
2-CNC Controller for lathe/Turning Machine
3-CNC Controller for Milling Machine/Machining Center
4-CNC Controller for plasma/flame
5-AC servo drive,
6-AC servo motor,
7-Spindle servo motor and driver
8-Frequency inverter/Frequency converter/Vector control/AC drive
9-4, 6, 8 station tool post, NC turret, power turret, tool changer, tool carriage.
10-Retrofitting consultant and CNC tech support.

Cartons

Technical parameters:

Working area: 900mm, 600mm
Engraving speed: 1-64000mm/min
Cutting speed: 1-32000mm/min
Cutting thickness: 1-20mm/min
Laser power: 60W/80W/100W
Resolution: 0.025mm
Location precision: <0.01mm
The smallest characters formed: Chinese character 2, 2mm Letter 1, 1mm
Number of hanged line: 60line
Power Supply: AC220V, 10% 50HZ
Gross power: <1200w
Working temperature: 0~45
Working humility: 5%-95%(Free of condensed water)
Cooling way: Industry water cooling
Graphic file format supported: PLT,CDR,AI,DWG,DXF,DST,BMP,JPEG,TIFF,GIF,PCX.


stable plywood case