Frequency Inverter

1, before commissioning must ensure that the pump and pipeline full of water, so as not to damage the pump.
2, the pump is filled with water to open the pump bleeder valve for exhaust, so as not to cause unstable pipeline pressure can not be normal pressure regulation.
3, the cabinet door on the surface of the manual stop automatic transfer switch, hit the manual for the frequency start, automatic inverter start by the outlet pipe remote pressure gauge according to the set pressure automatic control.
4, due to manual and automatic power supply into the line is not the same, so the manual and automatic pumps are not the same, all pumps to work manually are adjusted to the positive, automatic reversal of the frequency converter output on the U2, V2, W2, any two-phase switching can be.
5, set the pressure to stop the pump (i.e., the maximum pressure) just press (ENTER) on the inverter panel into the display (REF) and then press (ENTER) into the display of 40% (i.e., 0.4MPa pressure), such as the need to increase and decrease the pressure according to the (Increase key) or (Decrease key) to set the required pressure value (i.e., the pressure stop the pump), set the value of the pressure and then press (ENTER) to save, then the After setting the pressure value, press (ENTER) to save it, and then press (EXIT) to return to the main interface to complete the setting; the pump pressure is based on the highest pressure to be converted by itself without setting.

VEICHI provides OEM/ODM Service for TOP Customers.

GS00 Water pump integrated machine

1. Motor-drive integrated structure,convenient installation and maintenance
The controller wraps the surface of the motor to truly achieve an integrated design. Only four screws are required for installation; the motor and the fan also dissipate heat for the motor and the drive, reducing the fan failure rate.

2. Motor protection function
Multiple inverter basic protection functions; Water pump exclusive protection function(water shortage protection, high and low pressure protection, leakage protection, anti-freeze embroidery protection, sensor disconnection protection)

3. Perfectly drive a variety of pump motors
Perfectly drive a variety of water pump motors such as asynchronous, permanent magnet synchronous, synchronous reluctance, etc.

4. Efficient speed regulating fan
High-efficiency fan dissipates the motor and drive at the same time, with large air volume and low noise.

5. Multiple key selection
Mechanical key,touch screen key

6. Multiple pump control
The pressure of the pipe network is detected by the host and sent to the auxiliary machine. When the pressure is not enough, the auxiliary machine starts and runs according to the set frequency, and the main machine performs constant pressure PID adjustment.

Applications:
Farmland irrigation, residential water, landscape fountains, swimming pool water supply, desert management

VEICHI provides OEM/ODM Service for TOP Customers.

GS00 Water pump integrated machine

1. Motor-drive integrated structure,convenient installation and maintenance
The controller wraps the surface of the motor to truly achieve an integrated design. Only four screws are required for installation; the motor and the fan also dissipate heat for the motor and the drive, reducing the fan failure rate.

2. Motor protection function
Multiple inverter basic protection functions; Water pump exclusive protection function(water shortage protection, high and low pressure protection, leakage protection, anti-freeze embroidery protection, sensor disconnection protection)

3. Perfectly drive a variety of pump motors
Perfectly drive a variety of water pump motors such as asynchronous, permanent magnet synchronous, synchronous reluctance, etc.

4. Efficient speed regulating fan
High-efficiency fan dissipates the motor and drive at the same time, with large air volume and low noise.

5. Multiple key selection
Mechanical key,touch screen key

6. Multiple pump control
The pressure of the pipe network is detected by the host and sent to the auxiliary machine. When the pressure is not enough, the auxiliary machine starts and runs according to the set frequency, and the main machine performs constant pressure PID adjustment.

Applications:
Farmland irrigation, residential water, landscape fountains, swimming pool water supply, desert management

VEICHI provides OEM/ODM Service for TOP Customers.

S200-C4/E4 type construction hoist integrated drive is a special model developed for construction hoist electric control system. Set frequency converter, brake module, logic controller, weight limiter, brake power supply, etc. Provide customers with a high-performance, complete electrical control program.

Product Advantages
Function upgrade
1. High-performance vector professional platform, excellent motor control algorithm.
2. Brake torque detection function.
3. The automatic test function saves time before leaving the factory and improves delivery efficiency.
4. HMI man-machine interface interactive system.

Technological innovation
1. Designed with upper and lower deceleration limit interfaces, which are independent of each other and do not interfere with each other, and can quickly enter high-speed gears to improve equipment carrying efficiency.
2. Automatic leveling: simplify the complex and make the operation more user-friendly.
3. Soft limit protection, accurate feedback of real-time position through the height encoder; even when the upper and lower limit fails. Make sure that the lift does not appear to rush to the top and squat bottom.
4. Deceleration optimization, suitable for "old machine retrofits" without deceleration limit conditions.

Applications Construction lifts

The output voltage: Output under rated conditions: 3-phase, 0input voltage, error less than 5%
Output frequency range: 0ï½?600Hz

8-frequency inverter, frequency converter, vector control, ac drive
9-4 6 8 station tool post, nc turret, power turret, tool changer, tool carriage.
10-retrofitting consultant & cnc tech support.

Set(s)

GSK988T is a new CNC controller for slant bed CNC lathe and turning center, adopt micro processor of 400MHz high 0.0001mm is selected.