Find Verified Air Filters Suppliers, Manufacturers and Wholesalers

GPC air filter is located in the engine intake system and is an assembly of one or more clean air filter components. In order for the engine to function properly, a large amount of pure air must be inhaled. The main requirements of the air filter are high filtration efficiency, low flow resistance, and continuous use for a long time. Poor quality of air filters can not capture the fine particles in the air to the maximum extent, the filtration precision is low,which will result into the cylinder wear is increased by 7 times, the piston wear is increased by 3 times, and the piston ring wear is increased by 8 times. If the air filter is not replaced on time, it will cause clogging due to excessive dust accumulation on the filter paper, and the intake resistance will increase, causing the engine power to drop or the fuel consumption to increase by 5%.

Home air purifier with ionizer
Features and characteristics of kjg200-td01a
Luxury design as promotion
Air rushes in from 3 sides and rushes out from the top
3 levels of fan speeds: high, medium, low
Automatic timing with sleep mode
Multicolored lcd display
Purification modes: non-woven filter , activated carbon , hepa filter, cool-catalyst·+
With ionizer
Odor sensor and dust sensor senses the air purifier pollution automatically
Remote control: super-thin and delicate
Simple maintenance and repair

Specification:
•description : home air purifier with ionizer
•model: :kjg220-td01a
•consumption (w) :45ffffffffff
•power (v) :110-230v/50-60hz as per local standard
•air flow(m3/h) :180ff
•speed adjusting : 3 type
•noise level [db(a)] :speed 3f_45ffff
•filtration eff%·ª fª99.97%
•negative ions :>=5, 000, 000 ions/cm3 or above
•filter lifetime (month)·ª12-24
•purifying capacity(m2)f+40
•weight : 5.1kgs(n.W) 6.1kgs(g.W)
•safety certificate :ce, gs, ul
•colors :orange/bule/grey
•product size :360188506mm
•gift box size :410227555mm
•ctn loading :20fª(520pcs);40fª(1050pcs);
•manufacturer : transit

freezer air dryer
refrigerated air dryer
air dryer 10hp
Pressure Dew Point(PDP): 2~10
Capacity :1.2~400m3/min(42~14000cfm)
Working pressure :â?¤1.6MPA (16bar)
Max. inlet temperature : 80â??
Refrigerant:R134A\R410A\R407C
Max. Ambient temperature:40
Min. ambient temoperature:5
Cooling type :Air-cooling

Adopt patent technology: 3 In 1 Semiconductor technology

Built-in antibacterial mold-proof filter to filter dust in the air

Adopt microcomputer program control, HD LCD display

Imported control chip with PM2.5, air quality, air temperature and humidity monitoring

With setting of six timed working hours, timed loop operation

Remote control with far distance infrared receiver, can be 45 degrees of arbitrary control

The air enter from top surface, fresh air supply like wind on the bottom, so the sterilization is comprehensive.

In the timed and manual mode, high, medium and low wind speed gears can be selected for operation.

In the timed and manual mode, individually activated light wave reaction device or semiconductor device can be set.

Convenient maintenance and maintenance: Cumulative contaminants after the semiconductor device operated, it can

China Wholesale H13 Hepa Filter Manufacturer,Hepa Air Filter For Clean Room

Descriptions

Features:
ULTRA low resistance
Light weight, high efficiency, cost effective
With ultra-thin design which saves the installation space
Every piece of HEPA filter must be scanned by scanner before delivery
Efficiencies:
HR=99.99% @0.3m
Standard:
EN1822
Operating temperature:
Max 80 (180)
Operating humidity:
100%
Applications
Partial filtration for cleaning equipments like laminar flow hood, clean work station, bio-safety cabinet, pass window etc.
Filtration in semi conductor, nuclear power reserch,parmaceutical, sophisticated machine, cosmetics and other locations where ultra-clean is a requirement.
Specifications
Size
(mm)
Rate
airflow
m 3/h
Initial
resistance
Pa
Efficiency
Material
Frame
Media
Separator
Sealant
Gasket
Protecting mesh
305*610*69
435
160
99.99% 0.3μm
Aluminum
Fiber glass
Hot melt adhesive
Polyurethane
PU foam
Paint steel mesh/
Aluminum mesh
610China Wholesale H13 Hepa Filter Manufacturer,Hepa Air Filter For Clean Room

Descriptions

Features:
ULTRA low resistance
Light weight, high efficiency, cost effective
With ultra-thin design which saves the installation space
Every piece of HEPA filter must be scanned by scanner before delivery
Efficiencies:
HR=99.99% .3
Standard:
EN1822
Operating temperature:
Max 80 (180)
Operating humidity:
100%
Applications
Partial filtration for cleaning equipments like laminar flow hood, clean work station, bio-safety cabinet, pass window etc.
Filtration in semi conductor, nuclear power reserch,parmaceutical, sophisticated machine, cosmetics and other locations where ultra-clean is a requirement.
Specifications
Size
(mm)
Rate
airflow
m 3/h
Initial
resistance
Pa
Efficiency
Material
Frame
Media
Separator
Sealant
Gasket
Protecting mesh
305*610*69
435
â?¤160
99.99% @0.3μm
Aluminum
Fiber glass
Hot melt adhesive
Polyurethane
PU foam
Paint steel mesh/
Aluminum mesh
610*610*69
1000
610*915*69
1300
570*1170*69
1500
1.10% allowed for initial resistance
2.Any size can be customized
*610*69
1000
610*915*69
1300
570*1170*69
1500
1.10% allowed for initial resistance
2.Any size can be customized