Hi-tech Filters is a proven leader in Filter Cloth for a host of mining, beneficiation & Palettization Process applications, including but not limited to processing of high-value metals such as:
Iron Ore
Zinc & Lead
Chromium & Nickel
Rare earths & Cobalt
Molybdenum
And more
Hi-tech Filters has a host of mining filter press cloth solutions and as the needs of the industry evolve, we will continue to innovate and provide engineered filtration solutions that address changing orebodies, locations, and increasingly demanding mining productivity requirements.
Polypropylene Mono x Multi Filter Cloth
Hi-tech Filters offering Polypropylene Monofilament x Multifilament Calendared Filter Press cloth to achieve over 2000 cycles in Iron Ore (Beneficiation and Palletization filtration)
Solutions for Abrasion and High-Velocity Slurries
Hi-tech Filters offers filter Cloth designed with welded High performance feed necks, which are:
Abrasion-resistant for longer cloth life
Designed to minimize product loss at the neck &
Excellent for extremely high velocity mining slurry.
Reduction in maintenance costs associated with the longer number of cycles between cloth changeouts
Better cake release
Significant increase in filter presses up-time
Lower documented cake moisture for lower hauling costs
Did you know that Hi-tech Filters custom-manufactures top-quality replacement cloth for all makes and models of mining filter press and we will custom-design fabrics to meet the specific production goals for your mine?
We are particularly expert at manufacturing Mining Filter Cloth for 2.0m x 2.0m filter presses and 2.5m x 2.5m filter presses!
Hi-Tech Filter Manufacturing CGR filter cloth is shaped like an octagon and is caulked into a groove located around the outer edge of the recess plate to provide filter cloth support and ensure excellent filtration. Also provides strong sealing for a leak-free operation.
Please get in touch with Hi-Tech Filters to know more about our expertise in optimizing your dewatering problems!
www.hitechfiltersfabric.com
Pulse Jet Bag Filter
The Bag House/Bag Filter is generic name of Air Pollution Control Equipment. It is designed around the use of engineered fabric, filter tubes, envelopes or cartridges in capturing dust, separating dust or filtration process. AIL provides reliable and highly efficient Bag Filters and Bag House systems.
The dust laden gas enters through inlet nozzle and spreads all over the entire cross section of the bag filter. The gas moves up & passes through the bags, enters the clean air plenum through the top open end of the bags. During the passage of the gases through the fabric, the dust is retained on the outside surface of the bags. As the filtration proceeds the thickness of the dust layer on the fabric surface increases resulting in increase in pressure drop across the fabric. This necessitates the cleaning of the bags. Since the air flow is from outside to inside, the bags tend to collapse and are held by the wire cages, whose shape they acquire. The compressed air passing through the solenoid valves injects air at very high velocity for a short duration. This produces a shock wave causing the bag to expand and dislodging the dust cake which falls into the hopper. This unit is generally meant to operate with a pressure differential of 100-125 mmWG.
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing.
Main Specification
(Customized size is acceptable.) 3.0mm thickness
* 12mm width *15m roll length
2.5mm thickness * 8mm width * 15m roll length
2 mm thickness * 15mm width * 20m roll length
2.5 mm thickness * 8mm width * 20m roll length
Main Color
black, grey, white
Technical Data
Product Series FOCUS-6100
Application Composite Materials Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 23N/cm
Tensile Strength 220KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion.
Wide application temperature range.
Excellent performance in waterproofing and sealing.
Applications
* During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent
sealing property between vacuum bags and molds.
* During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds.
* As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht.
* Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
Cyclone Dust Collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dustand other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air purifiers, which use disposable filters to remove dust.
Multiple-cyclone separators consist of a number of small-diameter cyclones, operating in parallel and having a common gas inlet and outlet, as shown in the figure, and operate on the same principle as single cyclone separatorsâ??creating an outer downward vortex and an ascending inner vortex.
Multiple-cyclone separators remove more dust than single cyclone separators because the individual cyclones have a greater length and smaller diameter. The longer length provides longer residence time while the smaller diameter creates greater centrifugal force. These two factors result in better separation of dust particulates. The pressure drop of multiple-cyclone separators collectors is higher than that of single-cyclone separators, requiring more energy to clean the same amount of air. A single-chamber cyclone separator of the same volume is more economical, but doesn't remove as much dust.
Cyclone separators are found in all types of power and industrial applications, including pulp and paper plants, cement plants, steel mills, petroleum coke plants, metallurgical plants, saw mills and other kinds of facilities that process dust.
compressed air filter
1). Separator filter (HF9)
For bulk liquid removal plus a 3 micron coalescer (5ppm w/w maximum remaining oil content)
Two-stage filtration
* First stage: two stainless steel orifice tubes provide 10 micron mechanical separation
* Second stage: in-depth fiber media captures solid and liquid particles to 3 micron
2). Air line filter (HF7)
For removal of liquid water and oil; removes solid particles to 1 micron (1.0 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two-stage filtration
* Firt stage: captures larger particles with alternate layers of fiber media and media screen
* Second stage: coalesces aerosols and captures solid particles with multiple layers of epoxy bonded, blended fiber media
3). High efficiency oil removal filter (HF5)
For coalescing fine water and oil aerosols; removes solid particles to 0.01 micron (0.01 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two stage filtration
* First stage: multiple layers of bonded, blended fiber media for fine coalescence
* Second stage: multiple layers of bonded, blended fiber media for fine coalescence
Outer coated, closed cell foam sleeve
4). Ultra high efficiency oil removal filter (HF3)
For coalescing ultra-fine oil aerosols; removes solid particles to 0.01 micron (0.001 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two stage filtration
* First stage: coated, closed cell foam sleeve acts as pre-filter and flow disperser
* Second stage: multiple layers of matrix blended fiber media for ultra-fine coalescence
Outer coated, closed cell foam sleeve
5). Oil vapor removal filter (HF1)
For removal of oil and hydrocarbon vapors normally absorbable by activated carbon; removes solid particles to 0.01 micron (0.003 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two stage filtration
* first stage: stabilized bed of finely divided carbon particles removes the majority of the oil vapor
* Second stage: multiple layers of fiber media with bonded micro fine carbon particles remove the remaining oil vapor
Multiple layers of fine media prevent particle migration
Outer coated, closed cell foam sleeve prevents fiber migration
Designed life is 1000 hours under rated conditions.
