The Introduction of Calcined Petroleum Coke
Calcined Petroleum coke is a by-product of delayed coking unit when the raw oil is cracked at high temperature to produce light oil.The output of petroleum coke is about 25-30% of the raw oil. Its low calorific value is about 1.5-2 times that of coal, ash content is not more than 0.5%, volatile content is about 11%, and its quality is close to anthracite
The Application:
1. Low-sulfur, high-quality cooked coke such as needle coke is mainly used to manufacture ultra-high power graphite electrodes and certain special carbon products; needle coke is an important material for the development of new electric furnace steel making technology in the steel making industry.
2. Medium-sulfur, ordinary cooked coke, used in aluminum smelting in large quantities.
3.High-sulfur, ordinary green coke is used in chemical production, such as the manufacture of calcium carbide, silicon carbide, etc., and also as a fuel for metal casting, etc.
Hello ,
We are direct mandate to Russia Refinery, direct suppliers of petroleum/petrochemical products. Our suppliers do supplies products to any safe port in the world. We are connected to the most reputable Russian Refineries and negotiate transactions on behalf of buyers and our refineries. Our petroleum products' best specifications with the best prices as well. Below are the products we have available for an urgent lift in the port of Rotterdam and Russia.
Products available for FOB Rotterdam:
D6, JET A1, JP54, D2, EN590, LNG & LPG.
Products available on CIF Basis:
D6, JET A1, JP54, D2, EN590, LNG & LPG, REBCO, Mazut, Bitumen, Urea.
EURO4/5 , EN590 ( 10PPM,50PPM )JETA1, JETA & TS-1
LCO LPG ESPO MAZUT KEROSENE 54 BITUMEN LNG
GASOLINE OCTANE BLENDS CRUDE GOST
BASE OIL AGO UREA DAP PETROLEUM COKE
COAL NCV 5500 FUEL OIL CST-180
SULPHUR GRANULAR RUSSIAN ORIGIN
CRUDE OIL REBCO
WE ARE DIRECT FROM RUSSIA REFINERIES TTO/FOB/CIF AND WE DELIVER GLOBALLY.
Semi coke
Production process
Semi coke is a new type of carbon material obtained by pyrolysis of high-quality Jurassic coal blocks abundant in Shenfu coalfield under medium and low temperature conditions to precipitate coal tar and gas.
Characteristics
1. Â High fixed carbon
2. Â High specific resistance
3. Â High chemical activity
4. Â Low ash content
5. Â Low sulphur
6. Â Low phosphorus
7. Â Low Aluminium
8. Low emissions of combustion pollutants
Application
It is widely used in chemical industry, metallurgical industry, gas-making industry, etc.; It is used to produce calcium carbide, ferroalloy, ferrosilicon, silicon carbide, silicomanganese, fertilizer, etc.
It has  became an irreplaceable carbon materials. Semi-coke can completely replace the general coke, and the quality is superior to a number of standards of the national metallurgical coke, coke and ferroalloy coke.
So semi coke has higher application value in the improvement of downstream product's quality level, energy conservation, reduction of production cost, increase production etc..
.
Semi coke also can be used for indoor heat preservation, home cooking, fireplace, small boiler and agricultural production of dry industry.
In addition, the application of semi coke in reducing agents, adsorption materials, blast furnaces and other fields is also expanding. Especially in the carbonaceous reducing agent has unique performance, Â economic advantage is very obvious.
Advantages of semi coke than Met Coke in production of Ferro-alloy smelting as deoxidizer:
1.Semi Coke could improve the quality of the ferroalloy significantly (especially low aluminum alloy Al2O3 0.1%).
2.Semi Coke could reduce unit electricity consumption significantly (nearly save more than 1000 KWHR, that means 8-10%).
3.Semi coke could lower the cost of raw material. Although the price of semi coke and coke is similar, but it's far cheaper than charcoal and pet-coke.
4.It's very simple to replace coke, pet-coke and charcoal with semi coke. And it's no need to upgrade your equipment, the operation is easy and process is simple.
Specification:
Fixed carbon 83% Sulphur 0.5%
Ash 9% Phosphorus 0.02%
Volatile matter 8% Moisture 18%
Size 0-8mm, 8-18mm, 18-35mm, 35-60mm
Remarks: All specification can be customized according to your requirement.
We are global trading organization based in India to facilitate buying of Petrochemicals for buyers across the world.
Primarily in recent past we have been focusing on Green Sponge and Calcine Pet-Coke having Sulphur less then 4%, GCV in rage of 8000 Kcal/Kg, Ash under 1%, HGI 80+, Moisture less than 8-10% and for Calcine 150PPM calcium.
We can offer FOB / CIF / CFR quotes and delivery on mutual terms with LC as payment instrument and SGS and/or any third party inspection client may wish to opt for at source and CIF both.
Coke is mainly used in blast furnace ironmaking and blast furnace smelting of non-ferrous metals such as copper, lead, zinc, titanium, antimony and mercury. It plays the role of reducing agent, heating agent and material column framework.
The use of coke instead of charcoal in ironmaking blast furnace has laid the foundation for the large-scale of modern blast furnace and is a major milestone in the history of metallurgy. In order to achieve better technical and economic indexes for blast furnace operation, smelting coke (metallurgical coke) must have appropriate chemical and physical properties, including thermal properties in smelting process.
Coke is not only widely used in iron making and non-ferrous metal smelting (metallurgical coke), but also used in casting, chemical industry, calcium carbide and ferroalloy, with different quality requirements.
For example, the particle size and porosity of casting coke are generally high, such as low carbon and fixed coke; Coke for chemical gasification has not strict requirements on strength, but requires good reactivity and high ash melting point; Coke for calcium carbide production is required to increase the fixed carbon content as much as possible used widely in fields of iron and steel making, foundry industry,
the chemicals industry, calcium carbide manufacturing, ferro alloy industry, etc.
Flare Enterprises is supplier of petcoke with very competitive price and specifications. our product has less then 3% Sulphur contents. SCO will be sent to the interested buyer immediately on contact.
