Mjsf-V Single Facer (Vacuum Suction)

Introduction:
Single Facer is the main machine for producing the corrugated paperboard. Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard.
HS CODE: 844180900

Characteristics:
1. Cover vacuum suction.
2. Corrugating roll is made of high quality alloy steel 48CrMo, the surface is medium-frequency quenched and chrome-plated. Hardness can reach HRC55~60, which ensures good wear-resistance and long life service.
3. Independent transmission box, transmit by shaft coupling.
4. Glue roll is lifted and lowered pneumatically.
5. Independent glue clean device and electric glue-separate board to control the width of glue.
6. Manually regulate or electrically regulate the display device.
7. Lubricated by high temperature lubricate grease.
8. Surface of all dancing rolls and preheating rolls is grinded and chrome-plated.
9. Pressure roll is medium- frequency quenched and chrome-plated.
10. Width 1000mm~2000mm.
11. Preheating rolls, pressure rolls and corrugating rolls all meet the National Standard of Pressure Vessel. Working pressure is 1.1MPa.

Main Technological Parameters:

MJSF-280V
Working Width 1200mm 1400mm 1600mm 1800mm
Heating method Steam heating
Design speed 100m/min
Economical speed 80 m/min
Compress-air pressure 0.4-0.9MPa
Flute type Standard flute UV Flute
Standard spec. A,B,C,E,F
For other type and model, we can produce as customerâ??s requirement.
Corrugated roll diameter (mm) 280
Wall Thickness (mm) 130
Type Vacuum Absorb
Roller material 48CrMo alloy, Heat treated
Machine Size (mm) 3300*1300*1700 3550*1300*1700 3800*1300*1700 4050*1300*1700

High food vacuum packaging machine high temperature sterilization food sealing machine is suitable for all kinds of plastic composite film bags or aluminum foil composite film bags. After vacuum packaging, it can effectively keep fresh, guarantee quality, moistureproof, clean and clean all kinds of rice cakes, bean products, meat products, aquatic products, agricultural products, pickles, fast food products, prepared foods, powders, spices, electronics, hardware parts and drugs It can prevent mildew, rust, pollution, oxidation and vacuum sterilization, so as to prolong the shelf life.
Continuous vacuum packaging machine�¯�¼?
welcome order ! small type ,big type ,single chamber ,2-chamber ,rolling vacuum sealing packing machine ....!

High vacuum sealing packaging machine high temperature sterilization food sealing machine is suitable for all kinds of plastic composite film bags or aluminum foil composite film bags. After vacuum packaging, it can effectively keep fresh, guarantee quality, moistureproof, clean and clean all kinds of rice cakes, bean products, meat products, aquatic products, agricultural products, pickles, fast food products, prepared foods, powders, spices, electronics, hardware parts and drugs It can prevent mildew, rust, pollution, oxidation and vacuum sterilization, so as to prolong the shelf life.
welcome order ! small type ,big type ,single chamber ,2-chamber ,rolling vacuum sealing packing machine ....!

Keep food long quality time and Food taste by rolling vacuum sealing machine vacuum packing machine ,high efficient,sanitary! welcome order!

Food Powder packaging machine with bag making function, Nuts packing machine ,Spices powder packing machine ...more information pls contact us .
This machine is equipped with a dual CPU microcomputer control system a 5inch LCD display in Chinese or English a userfriendly operation interface automatic cursor detection and tracking and simpler operation Equipped with highprecision stepper motors to ensure the accuracy of the cutting position of each packaging bag
Performance Adopting a straight screw feeding method to prevent direct adjustment of packaging weight during the packaging process without the need for shutdown effectively improving work efficiency Optional devices such as coding machine lower blade round corner punching inflation exhaust and vacuum can be installed
Usage This machine is suitable for automatic measurement and packaging of powders such as milk powder coffee soy milk powder sesame paste lotus root powder dyeing powder seasoning powder medicinal powder etc
Paramters
Packing speed 3080bagsmin
Bag length 30300mm
Bag width 40430mmopen film width
Weight 400kg
Power 25Kw
Packing volume 501000ml
Machine size 820x1220x2000
Packing type back sealing

Technical parameters:
1. Effective width: 1800mm
2. Operate direction: left or right(Determined in accordance with the customer's facility)
3. Design speed: 150m/min, Running Speed: 120m/min.
4. Range of temperature: 160 ~ 180â??
5. Air source: 0.4 ~ 0.9Mpa
6. Steam pressure: 0.8 ~ 1.3Mpa
7. Corrugate flute (UV type or UVV type)

Roller diameter parameters:
1. Diameter of corrugated roller: ï¿ 320mm
2. Diameter of pressure roller: ï¿ 324mm
3. Diameter of glue roller: ï¿ 242mm
4. Diameter of preheat roller: ï¿ 325mm

Powered motor parameters:
1. Main drive motor: 18.5KW rated voltage: 380V 50Hz
continuous (S1) working system
2. Suction motor: 11KW rated voltage: 380V 50Hz
continuous (S1) working system
3. Adjust glue reducer: 100W rated voltage: 380V 50Hz
short (S2) working system
4. Adjust glue gap motor: 250W rated voltage: 380V 50Hz
short (S2) working system
5. Glue pump motor: 2.2KW rated voltage: 380V 50Hz
continuous (S1) working system

Introduction:
Single Facer is the main machine for producing the corrugated paperboard. Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard.
HS CODE: 844180900

Structural feature:
1) Adopt suction hood structure, matched high pressure powerful fan. Suction with silence, gas supply and electrical control cabinet to focus on the same operation away from the host is not less than 1.5m.Operating side closed full cover.
2) The base and wallboard cast iron structure, the thickness of wallboard is 200mm.Independent gear box, universal joint transmission structure.
3) Corrugated roller material adopt 48CrMo alloy steel, diameter of corrugated roller main roller 320mm Quenched, CNC grinder grinding, IF quenching, surface finish. Bearing of corrugated roller and pressure roller key parts adopt Timken bearings produce heat.
4) Pressure roller 324mm surface grinding and dealing with chrome, cylinder control moves up and down No. 45 carbon steel material, quenching (with cushioning devices).
5) Glue wallboard adopt skateboard-type structure, pneumatic control glue to glue back diameter of glue roller is 242mm, engraved polished surface after a 25-line pit style textured machined chrome plated After scraping the roller surface polished hard chrome plated.
6) Glue part can remove overall, exchange glue roller quickly and convenient.Electric compartment plastic, electric adjustment amount of glue Digital.
7) Material of corrugated and pressure is provided by zhongyuan tegang,corrugated roller side 0.15mmon high, pressure roller side 0.075mm high.Add limited device.
8) Corrugated roller and pressure roller adopt air spring pressure device, and working stable .
9) Preheat roller adopt seamless steel pipe produced by tiangang 400mm All metal hose connection.

Technical parameters:
1. Effective width: 1800mm
2. Operate direction: left or right(Determined in accordance with the customer's facility)
3. Design speed: 150m/min, Running Speed: 120m/min.
4. Range of temperature: 160 ~ 180â??
5. Air source: 0.4 ~ 0.9Mpa
6. Steam pressure: 0.8 ~ 1.3Mpa
7. Corrugate flute (UV type or UVV type)

Roller diameter parameters:
1. Diameter of corrugated roller: 320mm
2. Diameter of pressure roller: 324mm
3. Diameter of glue roller:  242mm
4. Diameter of preheat roller: 325mm

Powered motor parameters:
1. Main drive motor: 18.5KW rated voltage: 380V 50Hz
continuous (S1) working system
2. Suction motor: 11KW rated voltage: 380V 50Hz
continuous (S1) working system
3. Adjust glue reducer: 100W rated voltage: 380V 50Hz
short (S2) working system
4. Adjust glue gap motor: 250W rated voltage: 380V 50Hz
short (S2) working system
5. Glue pump motor: 2.2KW rated voltage: 380V 50Hz
continuous (S1) working system

WEB OFFSET NEWSLIGHT 36Newslight 36 is a single width, single circumference machine, running at a maximum speed of 36,000 impressions per hour. All controls are PLC based for ease of operation, which reduces make ready time and improves productivity. Newslight 36 is widely used for printing newspapers, supplements, textbooks, magazines etc. Short web path ensures excellent print quality and reduced waste. This provides an excellent price performance ratio. Newslight 36 incorporates high quality gears and precision bearings mounted in high grade stress-relieved cast iron which is machined on top quality CNC machines. These features together with the short vertical web lead, help ensure stable colour register in all colours.

Newslight 36 printing units are available in H unit and mono units. To print 4+4, tower configuration with two H units stacked on top of each other is the most suitable layout. Tower configuration is also available to print 4+1 and 4+2.