Introduction:
Single Facer is the main machine for producing the corrugated paperboard. Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard.
HS CODE: 844180900
Characteristics:
1. Cover vacuum suction.
2. Corrugating roll is made of high quality alloy steel 48CrMo, the surface is medium-frequency quenched and chrome-plated. Hardness can reach HRC55~60, which ensures good wear-resistance and long life service.
3. Independent transmission box, transmit by shaft coupling.
4. Glue roll is lifted and lowered pneumatically.
5. Independent glue clean device and electric glue-separate board to control the width of glue.
6. Manually regulate or electrically regulate the display device.
7. Lubricated by high temperature lubricate grease.
8. Surface of all dancing rolls and preheating rolls is grinded and chrome-plated.
9. Pressure roll is medium- frequency quenched and chrome-plated.
10. Width 1000mm~2000mm.
11. Preheating rolls, pressure rolls and corrugating rolls all meet the National Standard of Pressure Vessel. Working pressure is 1.1MPa.
Main Technological Parameters:
MJSF-280V
Working Width 1200mm 1400mm 1600mm 1800mm
Heating method Steam heating
Design speed 100m/min
Economical speed 80 m/min
Compress-air pressure 0.4-0.9MPa
Flute type Standard flute UV Flute
Standard spec. A,B,C,E,F
For other type and model, we can produce as customerâ??s requirement.
Corrugated roll diameter (mm) 280
Wall Thickness (mm) 130
Type Vacuum Absorb
Roller material 48CrMo alloy, Heat treated
Machine Size (mm) 3300*1300*1700 3550*1300*1700 3800*1300*1700 4050*1300*1700
Introduction:
Single Facer is the main machine for producing the corrugated paperboard. Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard.
HS CODE: 844180900
Characteristics:
1. Cover vacuum suction.
2. Corrugating roll is made of high quality alloy steel 48CrMo, the surface is medium-frequency quenched and chrome-plated. Hardness can reach HRC55~60, which ensures good wear-resistance and long life service.
3. Independent transmission box, transmit by shaft coupling.
4. Glue roll is lifted and lowered pneumatically.
5. Independent glue clean device and electric glue-separate board to control the width of glue.
6. Manually regulate or electrically regulate the display device.
7. Lubricated by high temperature lubricate grease.
8. Surface of all dancing rolls and preheating rolls is grinded and chrome-plated.
9. Pressure roll is medium- frequency quenched and chrome-plated.
10. Width 1000mm~2000mm.
11. Preheating rolls, pressure rolls and corrugating rolls all meet the National Standard of Pressure Vessel. Working pressure is 1.1MPa.
Main Technological Parameters:
MJSF-280V
Working Width 1200mm 1400mm 1600mm 1800mm
Heating method Steam heating
Design speed 100m/min
Economical speed 80 m/min
Compress-air pressure 0.4-0.9MPa
Flute type Standard flute UV Flute
Standard spec. A,B,C,E,F
For other type and model, we can produce as customerâ??s requirement.
Corrugated roll diameter (mm) 280
Wall Thickness (mm) 130
Type Vacuum Absorb
Roller material 48CrMo alloy, Heat treated
Machine Size (mm) 3300*1300*1700 3550*1300*1700 3800*1300*1700 4050*1300*1700
High food vacuum packaging machine high temperature sterilization food sealing machine is suitable for all kinds of plastic composite film bags or aluminum foil composite film bags. After vacuum packaging, it can effectively keep fresh, guarantee quality, moistureproof, clean and clean all kinds of rice cakes, bean products, meat products, aquatic products, agricultural products, pickles, fast food products, prepared foods, powders, spices, electronics, hardware parts and drugs It can prevent mildew, rust, pollution, oxidation and vacuum sterilization, so as to prolong the shelf life.
Continuous vacuum packaging machine�¯�¼?
welcome order ! small type ,big type ,single chamber ,2-chamber ,rolling vacuum sealing packing machine ....!
High vacuum sealing packaging machine high temperature sterilization food sealing machine is suitable for all kinds of plastic composite film bags or aluminum foil composite film bags. After vacuum packaging, it can effectively keep fresh, guarantee quality, moistureproof, clean and clean all kinds of rice cakes, bean products, meat products, aquatic products, agricultural products, pickles, fast food products, prepared foods, powders, spices, electronics, hardware parts and drugs It can prevent mildew, rust, pollution, oxidation and vacuum sterilization, so as to prolong the shelf life.
welcome order ! small type ,big type ,single chamber ,2-chamber ,rolling vacuum sealing packing machine ....!
3527 Mjsf V Single Facer (Vacuum Suction) Suppliers
Short on time? Let Mjsf V Single Facer (Vacuum Suction) sellers contact you.
Thermoplastic PS has two representatives as GPPS and HIPS resin. In particular, PS HIPS plastic is more popular thanks to many advantages and applications. PS HIPS belongs to the group of hard, transparent resins that are easy to color, machined by suction lamination method and easy injection technology.
Common HIPS applications:
In packaging technology, it is used as a single-layer packaging for products that do not require strict antioxidant requirements.
Make coating HIPS plastic film to increase water vapor and gas resistance.
Making a printing surface to increase printing ability, making the outer plastic packaging with the ability to tear easily and create gloss.
Making bottle caps, pen cases, jewelry boxes, beer tanks, fresh food containers.
Making pharmaceutical bottles, pipes, cap for solvent containers.
Making high-frequency insulating materials, insulation clamps.
Making imitation leather sandals, textile packaging.
Pressing students' tables and chairs, pressed motorcycle details, yogurt cup, plastic candy tray.
MATERIAL: HIPS Regrind White-Mix
CATEGORY: HIPS
TYPE: Regrind White-Mix
SPECIFICATION Product- HIPS regrind post production from Yogurt caps Contamination â?? up to 2% foil metalizing (cover of the yogurt caps). Food grade material Post - industrial Sheet Extrusion & Vacuum forming
Origin: Spain
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 650$ - 850$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
Thermoplastic PS has two representatives as GPPS and HIPS resin. In particular, PS HIPS plastic is more popular thanks to many advantages and applications. PS HIPS belongs to the group of hard, transparent resins that are easy to color, machined by suction lamination method and easy injection technology.
Common HIPS applications:
In packaging technology, it is used as a single-layer packaging for products that do not require strict antioxidant requirements.
Make coating HIPS plastic film to increase water vapor and gas resistance.
Making a printing surface to increase printing ability, making the outer plastic packaging with the ability to tear easily and create gloss.
Making bottle caps, pen cases, jewelry boxes, beer tanks, fresh food containers.
Making pharmaceutical bottles, pipes, cap for solvent containers.
Making high-frequency insulating materials, insulation clamps.
Making imitation leather sandals, textile packaging.
Pressing students' tables and chairs, pressed motorcycle details, yogurt cup, plastic candy tray.
MATERIAL: HIPS Regrind from post consumer materials ,Yes No Fr, NO pc abs, no iron, no circuit etc
CATEGORY: HIPS
TYPE: Regrind
SPECIFICATION: Hips from post consumer materials.Yes No Fr, NO pc abs, no iron, no circuit etc. Hips per month 52 mt
Origin: Bangladesh
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 650$ - 850$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.
Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press
Warmest greeting from HUVY IMPORT EXPORT CO., LTD. We are one of the leading companies specializes in fresh fruit to many countries in the world. We always try our best the offer the best quality with the most competive prices to our customer. Long term cooperative is our company purpose
SPECIFICATION:
Type: FROZEN TILAPIA FILLET
Manufacturer: Viet Nam
Ingredients: 100% Natural
Style: Fresh
Feature: Nature, Nutritious
Instruction for use: Thawing before cooking
Quality: 100% Fresh
Shelf Life: 12 months
Part: Fillet
Packaging: Vacuum Pack, Bag, Carton
Weight(kg): 10
Size(cm): 8-15cm
Single gross weight: 1000kg
Warmest greeting from HUVY IMPORT EXPORT CO., LTD. We are one of the leading companies specializes in fresh fruit to many countries in the world. We always try our best the offer the best quality with the most competive prices to our customer. Long term cooperative is our company purpose
SPECIFICATION:
Type: FROZEN TILAPIA FILLET
Manufacturer: Viet Nam
Ingredients: 100% Natural
Style: Fresh
Feature: Nature, Nutritious
Instruction for use: Thawing before cooking
Quality: 100% Fresh
Shelf Life: 12 months
Part: Fillet
Packaging: Vacuum Pack, Bag, Carton
Weight(kg): 10
Size(cm): 8-15cm
Single gross weight: 1000kg
Warmest greeting from HUVY IMPORT EXPORT CO., LTD. We are one of the leading companies specializes in fresh fruit to many countries in the world. We always try our best the offer the best quality with the most competive prices to our customer. Long term cooperative is our company purpose
SPECIFICATION:
Type: FROZEN TILAPIA FILLET
Manufacturer: Viet Nam
Ingredients: 100% Natural
Style: Fresh
Feature: Nature, Nutritious
Instruction for use: Thawing before cooking
Quality: 100% Fresh
Shelf Life: 12 months
Part: Fillet
Packaging: Vacuum Pack, Bag, Carton
Weight(kg): 10
Size(cm): 8-15cm
Single gross weight: 1000kg
Single Facer is the main machine for producing the corrugated paperboard. Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard.
Characteristics:
* Paper leading with Vacuum absorb model, have high-pressure & strong fan motor. The flow of fan can be adjusted, and have silencer; The electric control system fastens on a electrical case, which has min. 1.5meter distance from equipments, the operation side is completely independent.
* Gimble drive system, separated structure and independent drive case. Closed gear drive system with oiling lubrication, the usage life of the gears is highly prolonged.
* Machine base and wallboard is cast iron structure, thickness of the wallboard is 180mm.
* Corrugated Roll: Material of corrugated roll is 52CrMo alloy, which is dealt with quench, surface polish. Diameter of roll is Ø 320mm, surface hardness is more than HRC60. The adjust of up and down of roll is pneumatic controlled.
* Press roll: Diameter is Ø320mm, surface is worn down and chromeplated. The adjust of up and down of roll is pneumatic controlled, material is Carbon Iron 45#, dealt with confection.
* Pre-heater Roll: Diameter is Ø400mm, surface is worn down and chromeplated. All are connect with soft metal pipe.
* The bearing of corrugated roll and press roll are lubricated and high-temperature resistant.
* Glue supply and quit is pneumatic controlled, diameter of glue roll is Ø240mm, surface of roll has concave netted rind, surface polish & chromeplated. Surface of adjust roll is surface polish & chromeplated.
* Use electrical glue separate equipments, the glue part can run independently when the main motor stops, this can avoid the dry of the glue.(Choose by customer.)
* Middle height of corrugated roll is 0.10mm, middle height of press roll is 0.075mm. Have place limit equipment, diameter of tighten cylinder is Ø160mm.
Technological Parameters:
1. Working width: 1600mm, 1800mm, 2000mm,2200mm.
2. Design speed: 120m/min.
3. Operation direction: Left or right (design as customer’s workshop.)
4. Gas: 0.4-0.9Mpa.
5. Steam pressure: 0.8-1.3Mpa.
6. Flute: UV or UVV model, can design as customer’s requirement.
4) Vacuum suction paper leading features perfect flute formation
5) Dual flute structure, one pair flute rollers unit working and another preheating, achieve flute quickly change. Save working space ( if normal single facer machine need two sets to achieve this function ).
6) PLC control system. Touch screen display all running data, easy for operation.
7) The flute rollers made by special alloy steel with hardness treatment . it' hardness can reach HRC58-60, The surface is well treated by grind and plated chrome, or adopt Tungsten carbide flute rollers are optional.
8) The independent driving box, five driver axis, all gears with hardness treatment, oil spray lubricating by oil pump to reduce noise keep running stable, prolong the use life of gear.
9) Adopt Glue width motorized dividing to match the paper width. Idle running motor for glue applicator roll to avoid glue dry. Adjustment for gap between glue roller and doctor roller by electric . Digital read out for the gap between glue roll and doctor roll. Glue unit can be moved by pneumatic.
10) Flute rollers and pressure roller controlled by hydraulic system, working pressure stable.
11) With water spray device for adjust moisture capacity of flute paper.
12) This dual flute machine suit for single facer paperboard production line ---2 layer (Single facer paperboard ) and corrugated paperboard production line--- 3 & 5 &7 layer. With high market competitive power.
Technical parameters:
1. Effective width: 1800mm
2. Operate direction: left or right(Determined in accordance with the customer's facility)
3. Design speed: 150m/min, Running Speed: 120m/min.
4. Range of temperature: 160 ~ 180â??
5. Air source: 0.4 ~ 0.9Mpa
6. Steam pressure: 0.8 ~ 1.3Mpa
7. Corrugate flute (UV type or UVV type)
Roller diameter parameters:
1. Diameter of corrugated roller: ï¿ 320mm
2. Diameter of pressure roller: ï¿ 324mm
3. Diameter of glue roller: ï¿ 242mm
4. Diameter of preheat roller: ï¿ 325mm
Powered motor parameters:
1. Main drive motor: 18.5KW rated voltage: 380V 50Hz
continuous (S1) working system
2. Suction motor: 11KW rated voltage: 380V 50Hz
continuous (S1) working system
3. Adjust glue reducer: 100W rated voltage: 380V 50Hz
short (S2) working system
4. Adjust glue gap motor: 250W rated voltage: 380V 50Hz
short (S2) working system
5. Glue pump motor: 2.2KW rated voltage: 380V 50Hz
continuous (S1) working system
Introduction:
Single Facer is the main machine for producing the corrugated paperboard. Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard.
HS CODE: 844180900
Structural feature:
1) Adopt suction hood structure, matched high pressure powerful fan. Suction with silence, gas supply and electrical control cabinet to focus on the same operation away from the host is not less than 1.5m.Operating side closed full cover.
2) The base and wallboard cast iron structure, the thickness of wallboard is 200mm.Independent gear box, universal joint transmission structure.
3) Corrugated roller material adopt 48CrMo alloy steel, diameter of corrugated roller main roller 320mm Quenched, CNC grinder grinding, IF quenching, surface finish. Bearing of corrugated roller and pressure roller key parts adopt Timken bearings produce heat.
4) Pressure roller 324mm surface grinding and dealing with chrome, cylinder control moves up and down No. 45 carbon steel material, quenching (with cushioning devices).
5) Glue wallboard adopt skateboard-type structure, pneumatic control glue to glue back diameter of glue roller is 242mm, engraved polished surface after a 25-line pit style textured machined chrome plated After scraping the roller surface polished hard chrome plated.
6) Glue part can remove overall, exchange glue roller quickly and convenient.Electric compartment plastic, electric adjustment amount of glue Digital.
7) Material of corrugated and pressure is provided by zhongyuan tegang,corrugated roller side 0.15mmon high, pressure roller side 0.075mm high.Add limited device.
8) Corrugated roller and pressure roller adopt air spring pressure device, and working stable .
9) Preheat roller adopt seamless steel pipe produced by tiangang 400mm All metal hose connection.
Technical parameters:
1. Effective width: 1800mm
2. Operate direction: left or right(Determined in accordance with the customer's facility)
3. Design speed: 150m/min, Running Speed: 120m/min.
4. Range of temperature: 160 ~ 180â??
5. Air source: 0.4 ~ 0.9Mpa
6. Steam pressure: 0.8 ~ 1.3Mpa
7. Corrugate flute (UV type or UVV type)
Roller diameter parameters:
1. Diameter of corrugated roller: 320mm
2. Diameter of pressure roller: 324mm
3. Diameter of glue roller: Â 242mm
4. Diameter of preheat roller: 325mm
Powered motor parameters:
1. Main drive motor: 18.5KW rated voltage: 380V 50Hz
continuous (S1) working system
2. Suction motor: 11KW rated voltage: 380V 50Hz
continuous (S1) working system
3. Adjust glue reducer: 100W rated voltage: 380V 50Hz
short (S2) working system
4. Adjust glue gap motor: 250W rated voltage: 380V 50Hz
short (S2) working system
5. Glue pump motor: 2.2KW rated voltage: 380V 50Hz
continuous (S1) working system
Technical parameters:
1. Effective width: 1800mm
2. Operate direction: left or right(Determined in accordance with the customer's facility)
3. Design speed: 150m/min, Running Speed: 120m/min.
4. Range of temperature: 160 ~ 180
5. Air source: 0.4 ~ 0.9Mpa
6. Steam pressure: 0.8 ~ 1.3Mpa
7. Corrugate flute (UV type or UVV type)
Roller diameter parameters:
1. Diameter of corrugated roller: Â 320mm
2. Diameter of pressure roller: Â 324mm
3. Diameter of glue roller: Â 242mm
4. Diameter of preheat roller: Â 325mm
Powered motor parameters:
1. Main drive motor: 18.5KW rated voltage: 380V 50Hz
continuous (S1) working system
2. Suction motor: 11KW rated voltage: 380V 50Hz
continuous (S1) working system
3. Adjust glue reducer: 100W rated voltage: 380V 50Hz
short (S2) working system
4. Adjust glue gap motor: 250W rated voltage: 380V 50Hz
short (S2) working system
5. Glue pump motor: 2.2KW rated voltage: 380V 50Hz
continuous (S1) working system
Monoblock pumps -
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
- High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP
- Specially designed for wide voltage operation
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life
- Back pull-out design for easy servicing and repair
- Double shielded ball bearings, so no need of external lubrication
- All Model fitted to Mechanical seal.
specification
- Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 32 Mtr.
- Maximum Flow Rate : 940 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Method of Starting : Permanent Split Capacitor (PSC)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40,
50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm)
characteristics of clear cold water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : EN-8
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Plastic
Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- All Model fitted to Mechanical seal.
specification
Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 18 Mtr.
- Maximum Flow Rate : 4200 LPH
- Maximum Suction Lift : 8 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Single Phase, Clockwise from driving end
- Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
material Of construction - Motor
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : SS-410
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : Brass
Cooling Fan : Plastic
3527 Mjsf V Single Facer (Vacuum Suction) Suppliers
Short on time? Let Mjsf V Single Facer (Vacuum Suction) sellers contact you.
