Hangzhou Royal Packing Machinery Co. Ltd.

SPECIFICATIONS:
Model RYHK820T/TC RYHK-1050T/TC
Max. sheet size 820*600mm 1050*750mm
Min. sheet size 310*260mm 400*360mm
Max. die cutting size 800*580mm 1040*720mm
Max. hot stamping size 800*580mm 1040*720mm
Min. gripper margin 9-17mm 9-17mm
Inner chase size 910*610mm 1080*745mm
Stock range 80~600g/ã?¡(Card paper)
0.1 ~ 2mm (paper)
â?¦4mm (Corrugated paper)
Die cutting accuracy â?¤�±0.1mm â?¤�±0.1mm
Max. working pressure 200ton 300ton
Max. working speed 6000s/h 7500s/h
Max. paper feeding stacking height 1500mm (including wooden pallet) 1600mm (including wooden pallet)
Max. paper collecting stacking height 1300mm (including wooden pallet) 1400mm (including wooden pallet)
Max. gold foil diameter 250mm(longitudinal) 200mm(lateral) 250mm(longitudinal) 200mm(lateral)
Electric-heated system 12 temperature zone, 40-180â?? adjustable
Foil width 20-780mm 20-1020mm
Main motor power 7.5kw 11kw
Whole machine dimension 6700*3400*2200mm 7700*5200*2600mm
Total weight of machine About 14.5t About 18.5t
Full-load wattage 52kw 52kw

Configuration List RYHK-1050T/TC:
SN. Name Brand Place of Origin SN. Name Brand Place of Origin
1 Main motor SIEMENS Germany 13 Man-machine interface SCHNEIDER France
2 Die pressing base plate 5mm
HIGH ALLOY PLATE Germany 14 Inverter SCHNEIDER France
3 Vacuum BECKER Germany 15 Indicator light SCHNEIDER France
4 Intermittent segmentation TAN TZU Taiwan 16 Circuit breaker SCHNEIDER France
5 Rotary joint OMPI Italy 17 Safety relay SCHNEIDER France
6 Electromagnetic clutch OMPI Italy 18 Security module SCHNEIDER France
7 Electromagnetic gear clutch OMPI Italy 19 Button SCHNEIDER France
8 Feeder YONGCHUAN Taiwan 20 Motor protector SCHNEIDER France
9 Crankshaft material Ni-Cr-Mo METAL STEEL Germany 21 Magnetic switch SCHNEIDER France
10 Main drive chain RENOLD England 22 AC contactor SCHNEIDER France
11 Secondary chain TSUBAKIMOTO Japan 23 Button SCHNEIDER France
12 Tooth row, tooth slice KUI Japan 24 Relay SCHNEIDER France
25 Chip SCHNEIDER France 35 Paper conveying belt XINBEX China
26 Control center SCHNEIDER France 36 Cable TKD Germany
27 Three-longitudinal and two-lateral servo SCHNEIDER France 37 Air cylinder AIRTAC Taiwan
28 Hot stamping control system SCHNEIDER France 38 Air volume regulator AIRTAC Taiwan
29 Program controller SCHNEIDER France 39 Main solenoid valve AIRTAC Taiwan
30 Photoelectric switch OMRON Japan 40 Linear guide ABBA Taiwan
31 Relay seat OMRON Japan 41 Worm and gear WANCENG Taiwan
32 Proximity switch OMRON Japan 42 Wallboard and machine body structure QT500-7 nodular cast iron China
33 Encoder OMRON Japan 43 Main paper feeding motor DONGLI Taiwan
34 Sensor OMRON Japan 44 Lift motor of paper collecting platform DONGLI Taiwan

Introduction:
ROYAL PACKING is professional producer for 2-layer Corrugated cardboard production line in China. We can produce the 2 ply, 3 ply, 5 ply and 7 ply corrugated cardboard production line, Widths from 1000 to 2500mm, production speeds from 60 to 250 meters/min. We can offer reasonable project to meet customers requirements.

Technological Parameter:
Working Width 1200mm 1400mm 1600mm 1800mm
Heating method Steam heating
Design speed 100m/min
Economical speed 60-80m/min
Compress-air pressure 0.4-0.9MPa
Flute type Standard flute UV Flute
Standard spec. A,B,C,E,F
For other type and model, we can produce as customer s requirement.

Free Spare parts:
No. Name QTY
1 CNC Cutting knife 100units
2 Air blow gun 1unit
3 Screw type air tube 1set
4 T-Junction 1unit
5 HEX socket 1set
6 Open end Wrench 2units
7 Chuck 1set
8 Nut 2units
9 Hole Saw 2units
10 Water Pump 1unit
11 Plate holder 10units
12 Knife fixer 1unit
13 Dust collect bag 1set

Consumable part:
No. Name Unit Price (USD)
1 CNC Cutting knife USD3.2/unit.

Usage:

The CNC Rotary Die Making machine is mainly used for cutting, drilling on the different sizes Curve board. Specially developed software can import your CAD design of corrugated box, computer controls cutting units on servo motors to do cutting job on rotary die board, exactly as your design. It cuts with special drill and special saw strip. Not laser, but it can do same cutting as laser, even better.



Advantages:

Turn on the machine and use immediately, no need to wait, no need machine starting charge, no need first design box then start machine to cut
The using cost is low, speed is fast, it can detect and stop if if cutting drill break, automatically follow, it improves automation and reduce human works greatly, the only consumable part id drill. One piece of drill can cut several even more than 10 sets of rotary dies.
Low energy consumption, low requirement for voltage and electrical current,2 phases 220V is ok to power the machine.
The upper and lower cutting line have good vertical accuracy, it can hold the blade well, the neighboring blade can allow no welding.
Screw holes of all sizes and all shapes can be cut by one time, it solves the problem of inexact screw hole design.
In cutting, the board does not smoke, does not burn, no any pollution air, it is first choice of environment protection model.


Main Specification:

Cutting diameter of curve board: 110mm-800mm
Maximum Working thickness: 16mm
Maximum working length: 3000mm
Cutting speed: 36-72m/h
Accuracy: +/- 0.1mm
Motor power: 2.5kw/h
Control system: sanzhou kongzhiqi
Spindle: Chang sheng
Inverter: Fu ling
Servo driver: DELTA
Servo motor: DELTA
Machine size: 4200*1200*2200mm
Machine Weight: 1700kgs (reference weight)

Characteristics
* Automatically stack and collect the paperboard.
* Pneumatic control the transversely output of paperboard, electrical output.
* Vertical paperboard collecting use width belt for transportation.
* When the paperboard stack to required height, the paperboard is output by switch controlled.

Maim Technological Parameters

Speed 60ï¼?80m/min
Working width 1600mm
Max. Length of paperboard 2400 mm
Max.Height of paperboard 200 mm
Gas 0.4-0.9Mpa
Steam Pressure 0.8-1.3Mpa
Operation direction Left or right (design as customerâ??s workshop.)

Diameter of the rolls:
Belt roll:86mm, Surface of roll is chromeplated and polished.
Transversely output roll 124mm Surface of roll is chromeplated and polished.
Drive Power:
Main transport motor: 0.75KW 380V 50HZ
Transversely output motor 0.55KW 380V 50HZ
Running power 0.55KW 380V 50HZ

Introduction:

RYPE-X Digital press is mainly used for Packaging and printing industry, Suitable for Flute A,B,C,E corrugated paperboard, honeycomb paperboard, thin wood, etc. No need printing plate, mainly used for small batches production.

Feature Description:

Printing on demand, no need to clean the machine, no noise, comprehensively improve working environment of employees, and completely solve the environment problems of enterprises.
Orders of the same size, and different patterns can be exchanged seamlessly, quickly and easily. The data system can be changed and one size can be achieved.
Automatic sprinkler maintenance: software features automatic flash spray nozzle maintenance functions to ensure the smooth ray holes.
Reliable PCI communication: the use of high speed PCI interface and stable industrial grade all- optical data communication mode.
Smart sort order: customer is free to set the order of continuous production of different orders and sequential automatic production, the operator does not need another half way single row, to achieve three seconds fast for a single, time-saving more.
Equipment complies with CE standards and industry requirements hommization.

Introduction:
RYPE-A-G Digital press is mainly used for Packaging and printing industry, Suitable for Flute A,B,C,E corrugated paperboard, honeycomb paperboard, thin wood, etc. No need printing plate, mainly used for small batches production.

Feature Description:
xx.Printing on demand, no need to clean the machine, no noise, comprehensively improve working environment of employees, and completely solve the environment problems of enterprises.
xx. Orders of the same size, and different patterns can be exchanged seamlessly, quickly, and easily. The data system can be changed and one size can be achieved.
xx. Automatic sprinkler maintenance: software features automatic flash spray nozzle maintenance functions to ensure the smooth flow of water.
xx. Reliable PCI communication: the use of high-speed PCI interface and stable industrial-grade all-optical data communication mode.
xx. Smart sort order: customer is free to set the order of continuous production of different orders and sequential automatic production, the operator does not need another half way single row, to achieve three seconds fast for a single, time-saving more.
xx. Equipment complies with CE standards and industry requirements hommization.

Technical Parameter:
Type. RYPE-18A1-G RYPE-12A1-G
Material format 1800mm 1200mm
Printing format (Printhead quantity X 54 mm) X 2400 mm
Board Thickness Between 1mm~30mm
Feeding Mode Lead-edge feeder, vacuum suction, conveyor belt;
Print Head Quantity 8-16 can be customized 6-12 can be customized
Print Head Model Ricoh GEN5 Micro piezoelectric high precision print head
Ink Type Water-based dye ink
Ink Color C-M-Y-K Any one color
Drying speed Liner-board can be dry once print out
Printing efficiency 600*200DPI,max 130m/min 600*300DPI,max 90m/min 600*600DPI max 50m/min
Thermostat System Thermostat system with patent
Printing Resolution 600*200DPI
Operate System Professional RIP/ printing system, win10 system
Ink Supply Automatic two levels supply, Fully enclosed ink supply channel efficiency.
Graphics Format Support JPG-BMP-TIF, PDF
Print Head Cleaning System Automatic Negative pressure suction.
Operating Environment 15-30 indoor, temperature , Humidity 20-70%
Warranty 6 months for the print head, 1 year for the machine.
Power Supply 18.0 KW, AC380±10% 50~60HZ
Machine Size L W H 4000 4390 2000mm L W H 3400 3050 1800mm
Weight 5000 KG 2500 KG

Introduction:
RYPE-A-G Digital press is mainly used for Packaging and printing industry, Suitable for Flute A,B,C,E corrugated paperboard, honeycomb paperboard, thin wood, etc. No need printing plate, mainly used for small batches production.

Feature Description:
Printing on demand, no need to clean the machine, no noise, comprehensively improve working environment of employees, and completely solve the environment problems of enterprises.
Orders of the same size, and different patterns can be exchanged seamlessly, quickly and easily. The data system can be changed and one size can be achieved.
Automatic sprinkler maintenance: software features automatic flash spray nozzle maintenance functions to ensure the smooth ray holes.
Reliable PCI communication: the use of high speed PCI interface and stable industrial grade all- optical data communication mode.
Smart sort order: customer is free to set the order of continuous production of different orders and sequential automatic production, the operator does not need another half way single row, to achieve three seconds fast for a single, time-saving more.
Equipment complies with CE standards and industry requirements hommization.

Structure:
Gantry stacking. The change time is 5 seconds. It can count automatically, cross output automatically and change orders automatically.
Synchronize with the management system, order management, centralized management, automatic change of orders without slowing down.
Tracked stacking platform, AC servo control lifting, stable and orderly stacking;
When stack to the set quantity, automatically output the paperboard under inverter control.
Back baffle AC servo control positioning, automatic, fast and accurate adjustment when changing orders;
Back baffle can automatically move, suitable for small order stacking;
With independent electrical case, electrical case run under no-dust environment.
Color touch screen display, convenient for field operation.
Fully automatic operation control, improve efficiency, save manpower, reduce the labor intensity of operators;

Main technological Parameters:
1. Max. working width: 2200mm
2. Operation direction: Based on your line
3. Working speed: 150m/min
4. Max. stack height: 250mm
5. Max. stack length: Up-layer 3500mm, Down-layer: 2800mm.

Working width: 2600mm
Power: 3.0 kw
1. Combined application design for chip-removing brush and chip-removing blower can guarantee
2. Result of removing chip
3. High elastic round belt has long service life and cannot damage paperboard
4. Hight of belt and chip-removing brush can be adjusted
5. Trash conveying unit
6. Frequency conversion spee regulation can frelly adjust speed of trash cleaning.
7. Complete machine is practical and convenient and simply operated.

Regularly technical parameters:
1. Effective working width: 1800mm
2. Operation direction: left or right determined to the customer's factory
3. MAX. working speed: 200m/min
4. The maximum stack height: 1700mm
5. The MAX.stacking length: 3500 mm
6. Equipment size: Lmx12*Wmx2.2*Hmx1.9

â?»Mainly purchased parts, raw materials and origin:
Name of main parts Brands or place of origin Material and type
RV reducer Zhejiang fenghua
Feeding drive Taiwan delta Frequency
Proximity Switch japan OMRON
PLC Taiwan delta
HMI Taiwan's Wei Lun or Kunlun-state
Rotary encoder Wuxi ruipu
Contactor France Schneider
Profiles Tiangang or tanggang NO. 12Channel. NO.14å?·Channel. Square steel
Conveyor Flat belt Shanghai PVC Conveyor
Pneumatic components Zhejiang sonorCSM
Roller shaft Tiangang steel seamless pipe

Technological Parameters:
Model RYHC-1100 RYHC-1300 RYHC-1500 RYHC-1650 RYHC-1650
Max paper size (mm) 1100*790 1300*940 1500*1100 1650*1200 1900*1400
Min paper size (mm) 400*350 470*420 470*420 550*500 650*550
Max die-cutting size (mm) 1070*770 1280*920 1480*1080 1620*1180 1870*1380
Max working speed 6000(s/h) 5000(s/h) 5000(s/h) 4000(s/h) 3500(s/h)
Rated Power 11kw 13.5kw 13.5kw 19.7kw 22kw
Max working pressure 300(t) 300(t) 300(t) 300(t) 300(t)
Machine weight 14/15(t) 16/17(t) 18/19(t) 21/22(t) 27/28(t)
Scope of application Whiteboardâ?¥250g,
E, B, C, A and AB flute Corrugated paper 1-8.5mm

Configuration List
SN. Name Brand Place of Origin SN. Name Brand Place of Origin
1 Main motor SIEMENS Germany 13 Man-machine interface 10.4TFT KUNLUNTONGTAI China
2 Die pressing base plate 7mm
HIGH ALLOY PLATE Germany 14 Indicator light SCHNEIDER France
3 Vacuum BECKER Germany 15 Circuit breaker SCHNEIDER France
4 Intermittent segmentation TAN TZU Taiwan 16 Safety relay SCHNEIDER France
5 Rotary joint OMPI Italy 17 Security module SCHNEIDER France
6 Electromagnetic clutch OMPI Italy 18 Button SCHNEIDER France
7 Electromagnetic gear clutch OMPI Italy 19 Motor protector SCHNEIDER France
8 Feeder YONGCHUAN Taiwan 20 Magnetic switch SCHNEIDER France
9 Crankshaft material Ni-Cr-Mo METAL STEEL Germany 21 AC contactor SCHNEIDER France
10 Main drive chain RENOLD England 22 Button SCHNEIDER France
11 Secondary chain TSUBAKIMOTO Japan 23 Relay SCHNEIDER France
12 Tooth row, tooth slice KUI Japan 24 Inverter HUICHUAN China
25 Chip HUICHUAN China 35 Cable TKD Germany
26 Control center HUICHUAN China 36 Air cylinder AIRTAC Taiwan
27 Program controller HUICHUAN China 37 Air volume regulator AIRTAC Taiwan
28 Photoelectric switch OMRON Japan 38 Main solenoid valve AIRTAC Taiwan
29 Relay seat OMRON Japan 39 Linear guide ABBA Taiwan
30 Proximity switch OMRON Japan 40 Worm and gear WANCENG Taiwan
31 Encoder OMRON Japan 41 Wallboard and machine body structure QT500-7 nodular cast iron China
32 Sensor OMRON Japan 42 Main paper feeding motor DONGLI Taiwan
33 Paper conveying belt XINBEX China 43 Lift motor of paper collecting platform DONGLI Taiwan
34 Bearing NSK&HRB Japan&China

Introduction:
JQZ type Paper Shred Fan is mainly used for corrugated paperboard waste transportation system. It has the function of cutting waste paper and providing transport dynamic, it can shred the scrap edge of cardboard into pieces directly, conveying the waste paper scrapper to the waste paper packing room through the pipeline; Paper shred fan is usually equipped with a muffuler, so as to reduce noise and reduce dust.

Technological Parameter:
Model Power (kw) Rotation speed (r/min) Flow (m3/h) Pressure (Pa)
JQZ-4A 3 2900 821 ~ 2487 2669 ~ 1467
JQZ-4.5A 5.5 2900 1169 ~ 3542 3378 ~ 1856
JQZ-5A 11 2900 1604 ~ 4858 4170 ~ 2291
JQZ-6.8C 15 2130 4477 ~ 7202 4204 ~ 3514
JQZ-6.8C 18.5 2130 7942 ~ 8675 3258 ~ 2997

Introduction:
RYBJ-D Automatic Three-dimensional Carton Forming Machine is an ideal choice to produce hamburger boxes, chips boxes, takeout container, etc. It adopts micro-computer, PLC, alternating current frequency converter, the vacuum-sucking paper feeding, auto
gluing, automatic paper tape counting, chain drive. All of these main parts and electric control system adopts
imported brand to guarantee steady working, precise positioning, smooth running, safety and reliability operation.

Technical Specification:
Model RYBJ-D800 single line RYBJ-D1200 Dual line
Production capacity 60-160 pcs/min 120-300 pcs/min
Suitable Material: 160-600g/m2 card paper, corrugating max 1.5mm
length: L100-450mm, degree:5�°-40�°
width: B100-600mm
Sealing height H15-200mm B100-485mm
Sealing height H15-200mm
Total Power: 5.5KW 5.5KW
Total Weight: 2.2T 3T
Overall Dimension: 3600 x1400 x 1600 mm 3600 x 1800 x 1600 mm
power source 380V 50HZ

1. supplier Company name : Hangzhou ROYALL Import & Export Co. Ltd.

Department: qualityment Responsibler: zhangli xue

2. name of product : GLUE POWER
3. Ingredients of product]
Composition content:
Corn starch 90%
Silicate mineral filler 5%
Carbonate filler 3%
Sodium borate chemical compound 2%
4. dangerous Nonpoisonous, innocent. Easy fire when heating
5. emergency measure When into eye: please wash 15 minutes directly ,then go to The ophthalmology seeing a doctor, is cured
6. Conflagration measure Method of cutting out an engine. Prompt transfer the starch to the safe place . When being able to not transfer, the bag covers package with the wet woolen blanket.
7. Disclose measure The amylum starch by the empty space package bag to reclaim. Then Use water to wash, Wash water not discharging to the river or sea
8. Handle and storage time Be careful about water and dust, The working site carries out sufficient circulation of air
Storage: Plastic weaves bag package , the storing place in ventilation gloomy and cold.
9. Protect an implement Protect the glove , the dust prevention gauze mask , protect a mirror , protect clothes
10. Physical chemistry character Appearance : white powder
Smell: insipid
Specific gravity :1.2
Solubility :water dissolve,
Other: alkali character
11. Hazardous wastes
Boiling point: No.
Stability*Reactivity: Can be connected with the water in air slowly.
Other: No.
12. Hazardous wastes No.
13. Environmental effect :No
14. Paying attention to the environment being handled Put the starch into the package bag, not coming out from package bag when being fond of carrying.
15. Shipment Make sure the bag is not broken. No other requirement.
16. Suitable rules According to
17. Other No

1. Company name : Hangzhou ROYALL Import & Export Co.Ltd.
2. name of product : GLUE POWER
3. Ingredients of product]
Composition content:
Corn starch 90%
Silicate mineral filler 5%
Carbonate filler 3%
Sodium borate chemical compound 2%
4. dangerous Nonpoisonous,innocent. Easy fire when heating
5. emergency maesure When into eye:please wash 15 minutes directly ,then go to The ophthalmology seeing a doctor, is cured
6. Conflagration measure Method of cutting out an engine. Prompt transfer the starch to the safe place . When being able to not transfer, the bag covers package with the wet woolen blanket.
7. Disclose measure The amylum starch by the empty space package bag to reclaim. Then Use water to wash, Wash water not discharging to the river or sea
8. Handle and storage tiem Be careful about water and dust, The working site carries out sufficient circulation of air
Storage: Plastic weaves bag package , the storing place in ventilation gloomy and cold.
9. Protect an implement Protect the glove , the dust prevention gauze mask , protect a mirror , protect clothes
10. Physical chemistry character Appearance : white powder
Smell: insipid
Specific gravity :1.2
Solubility :water dissolve,
Other: alkali character

Hydraulic system parameters:
1. Work pressure (Mpa):16---18Mpa
2. lifting hydraulic cylinder: 100-440mm
3. Clamping hydraulic cylinder: 63-1300m
4. Hydraulic station motor power: 3KW --380V -- 50Hz
5. Solenoid valve voltage: 220V 50 Hz

Mainly purchased parts, raw materials and origin:
Name of main parts Brands or place of origin Material
Main shaft Day steel production Diameter 242mm
Swing arm Production by own Resin sand gray ironHT200
wallboard Jigang prduction Q235AWelding parts
bearing HRB,ZWZ,LYC
expand chuck Zhejiang xusheng 3-4inch shared
Main electrical appliance France Schneider
button CHINT NP2series
Air switch French Schneider
Pneumatic components Zhejiang Sonor CSM
Hydraulic station Shandong zaozhuang
Brake pump zhejiang

Technological Parameters:
Items High speed Middle speed
Model RYSD/ZS-9 RYSD/ZS-10
Thickness 9.0�±0.5 mm 10�±0.5 mm
Width 1200-2600mm 1200-2600mm
Weight kg/m2 7.0�±0.3 7.5�±0.3
Highest afford temperature 200 degree 200 degree
Tensile strength KN/40mm 18 17
Air permeability cm3/(cm2.min.Kpa) 1.5*103 1.5*103
Min. Turning Radius mm R70 R75
Max. running speed rpm 260 200
Material PET+COT (Polyester fiber+cotton)

Technological Parameters:
Items High speed Middle speed
Model RYSD/ZS-9 RYSD/ZS-10
Thickness 9.0±0.5 mm 10±0.5 mm
Width 1200-2600mm 1200-2600mm
Weight kg/m2 7.0±0.3 7.5±0.3
Highest afford temperature 200 degree 200 degree
Tensile strength KN/40mm 18 17
Air permeability cm3/(cm2.min.Kpa) 1.5*103 1.5*103
Min. Turning Radius mm R70 R75
Max. running speed rpm 260 200
Material PET+COT (Polyester fiber+cotton)

Specification:
XF-250/250A BRAKE DIAMETER IS 250MM
Air pressure Min. 0.02Mpa Max. 0.6Mpa
Single module torque 0.15(1.5) 16(160)

Heat dissipation power (kw) Rotating speed (100rpm) Rotating speed (300rpm) Rotating speed (600rpm) Rotating speed (1000rpm)
With fan 3.5 4.5 6 9
Without fan 1.2 2.2 3 4.8

Specification:
XF-250/250A BRAKE DIAMETER IS 250MM
Air pressure Min. 0.02Mpa Max. 0.6Mpa
Single module torque 0.15(1.5) 16(160)

Heat dissipation power (kw) Rotating speed (100rpm) Rotating speed (300rpm) Rotating speed (600rpm) Rotating speed (1000rpm)
With fan 3.5 4.5 6 9
Without fan 1.2 2.2 3 4.8

Model RYFS-1200 RYFS-1450 RYFS-1700
Max.paper weight 1200kg 1600kg 2500kg
Max.paper size 1200*800mm 1450*1100mm 1700*1200mm
Min.paper size 560*360mm 560*400mm 600*500mm
Open width Max.1640mm Max.1640mm Max.1900mm
Min.760mm Min.760mm Min.1200mm
Total power 9kw 12kw 17kw
Power supply 3P 380V AC 50Hz
Net weight 2800kg 4000kg 4500kg
Dimension 2.37*2.09*2.1m 2.5*2.4*2.3m 3.170*2.55*2.4m

Delivery time: In 15 days after we receive your deposit.
Payment term: 40% TT in advanced as deposit, and 60% TT after your check and test the machine before shipment.
Warranty: one year after receive the machine
Price Valid time: 30days.

Introduction:

This machine is used for both full and spot varnishing on light and thick paper with accurate and even spot coating by blanket or flexo plate. Many safeguards and human-based operating procedures ensure user safety and convenience. Imported elements for main bearings and electrical components are adopted in the machine.



Main Technical Parameters:

Model: RYJ-UV1100

Max sheet size

800 1100mm

Min sheet size

307 400mm

Max coating size

760 1060mm

Paper weight

80-450g/m²

Max speed UV coating

5000sheets/hour

Total electric consumption

45kw

UV lamp NO. power

3 9.75kw

IR lamp optional NO. power

15 1.5kw

weight

8.4T

Overall Dimensions

7600 2600 1950mm

Note: the speed is based on the paper size and paper weight

Introduction:
This high speed roll slitting machineis used for slitting and rewinding various large rolling materials such as paper, (80g/~400g/ kraft paper, cellophane paper, bill paper), double-face adhesive tape, PVC, plastic material, etc.
This slitting machine use PLC controller, automatic taper tension, central surface reeling. Frequency converter timing for main motor, keeping speedup and stable operation.
This slitting machine has the functions of automatic metering, automatic alarm, etc. With A, B inflatable shaft structures for rewinding; Finished products are automatic loading and unloading. It adopts photoelectric automatic error correction adjustment system for unwinding, anomalistic materials will be easy slit. (or liquid press style subtense system) . Equipped with automatic waste film blowing device. Automatic material inputting by pneumatic, matched with inflatable shaft (3"or 6") or pneumatic non-shaft device

Main Parameters:
Model RYFQ-2000 RYFQ-2500
Material thickness: 20-350g paper 20-350g paper
Max. Diameter of raw material: 1600mm 1600mm
Raw material paper core: 3#, 6# 3#, 6#
Max. Width of raw Material : 2000mm 2500mm
Min. Width of Raw Material 400mm 400mm
Roller surface width: 2050mm 2550mm
Width of slitting: 40-2000mm 40-2500mm
Rewinding paper core: 3# (can customized) 3# (can customized)
Max diameter of rewinding: 1500mm 1500mm
Error-correction length: 150mm 150mm
Precision: ±0.15mm ±0.15mm
Max. Speed: 400m/min 400m/min
Slitting speed: 10-400m/min 10-400m/min
Total power: 52KW 56KW
Total weight: 16000kg 18000kg
Dimension: 7500mmx4200mmx2300mm 7500mmx4500mmx2300mm
Slitting tools: 10 sets for standard, also can do according to customer's requirement.
Upper slitter dimension:125*70*50mm Brand: shanghai shenlong
Bottom round cutters dimension: 100*70*20mm Brand: shanghai shenlong
Rewinding shaft with 3pcs of 3# air shaft, recycle using.
This equipment is with 15pcs of 120 aluminum roller, 1pcs of rubber roller and 1pcs of steel roller.
With 2units round cutter shaft

Specifications:
Model RYF-920B
Max. Width 920mm
Paper Thickness 100-500g/m
Laminating Speed 0-30m/min
Gross Power 19kw
Overall Dimensions 4600-1760-1500mm
Total Weight 1900kg
Configurations:
1. Delta inverter is equipped for infinitely variable speed, and the operator can change the machine's speed easily and guarantee the machine's running stable.
2. Enlarged size of chromed heating roller is mounted with built-in oil heating system which provides balanced laminating temperature and owns excellent temperature persistence.
3. Delta PLC system realizes automatic paper separation, breakdown alert for self-protection etc. functions.
4. Pneumatic film unwinding system positions film roll more accurately, and makes the loading and unloading of film roll and film unwinding tension much more convenient.
5. Double sets of serrated perforating wheels provide different choices for different specifications of sheets and film.
6. Perfect traction adjusting system makes traction adjustment more convenient and efficient.
7. Corrugating delivery system and vibrating receiving system ensure paper collection more regular and convenient.

Introduction:

This slitting rewinding machine is suitable for slitting small rolling materials such as paper, aluminum foil, PVC, plastic film, insulation material, etc.it is equipped with frequency converter timing device, constant tension magnetic power control system for unwinding, photoelectric auto error-correction, two pieces magnetic powder clutches, main machine for controlling the center rewinding can be touched with surface, double shafts rewinding interlaced without meeting.

Main Parameters:
Model RYFQ-700D RYFQ-900D RYFQ-1100D
Max. Width of unwinding 700mm 700mm 700mm
Max. Diameter of unwinding �¦700mm �¦900mm �¦1100mm
Max. Diameter of rewinding �¦400mm �¦400mm �¦400mm
Min. Width of slitting 5mm 5mm 5mm
Total power 4kw 5.2kw 5.8kw
Weight (approx.) 1200kg 1400kg 1600kg
Overall dimension (LxWxH ) mm 2100x1300x1500 2100x1500x1500 2100x1700x1500

Main Parameters:
Model RYFQ- 1100C RYFQ- 1300C RYFQ- 1600C
Max. width of unwinding 1100mm 1300mm 1600mm
Max. diameter of unwinding 1400mm 1400mm 1400mm
Min. width of slitting 20mm 20mm 20mm
Max. diameter of rewinding 500mm 500mm 500mm
Speed 10-120m/min 10-120m/min 10-120m/min
Precision of slitting ±0.2mm ±0.2mm ±0.2mm
Total Power 7kw 7kw 8.5kw
Suitable power supply 380V/50Hz 380V/50Hz 380V/50Hz
Weight(approx) 2100kg 2300kg 2600kg
Overall dimension(LxWxH) mm 2850x2150x1350 2850x2350x1350 2850x2650x1350

Introduction:
This slitter is used for slitting and rewinding various large rolling materials such as paper,(20g/-300g/)cellophane paper, bill paper, double-face adhesive tape, PVC, weave material, non-woven of cloth, etc. Adopt A and B pneumatic shaft structure for rewinding. It adopts photoelectric automatic error correction adjustment system for unwinding, auto materials will be easy slit. Equipped with automatic waste film blowing device. Manual material loading for unwinding with taper cover style pneumatic shaft.

Main Parameters:
Model RYFQ-1100C RYFQ-1300C RYFQ-1600C
Max. width of unwinding 1100mm 1300mm 1600mm
Max. diameter of unwinding 700mm 700mm 700mm
Min. width of slitting 20mm 20mm 20mm
Max. diameter of rewinding 600mm 600mm 600mm
Speed 10-160m/min 10-160m/min 10-160m/min
Precision �±0.2mm �±0.2mm �±0.2mm
Total power 7kw 7.8kw 8.5kw
Suitable power supply 380v/50hz 380v/50hz 380v/50hz
Weight (approx.) 2100kg 2300kg 2600kg
Overall dimension
(LÃ??WÃ??H )(mm) 2850Ã??2200Ã??1350 2850Ã??2350Ã??1350 2850Ã??2650Ã??1350

Introduction:
This machine is used for slitting and rewinding various large rolling materials such as
paper, (20g/-200g/) cellophane paper, bill paper, double-face adhesive tape, PVC, Al ,foil,weave material, non-woven of cloth, BOPP, OPP, PET etc.

Main Parameters:
Model RYFQ-1300C
Max width of unwinding 1300mm
Max diameter of unwinding 1400
Min. width of slitting 30mm
Max. diameter of rewinding 00mm
Max Speed 350m/min
Total power 22KW
Power supply 380v.50hz
Weight 4500kg
Overall dimension (LXWXH) 2700X2800X2000mm

Introduction:
This machine is used for slitting and rewinding various large rolling material in thickness 40g/m2-300g/m2, such as paper, paper sticker, film, pvc, opp, bopp, PET, Aluminum foil et.

Main Parameters:
Model RYFQ-900B RYFQ-1100B RYFQ-1300B
Max. width of unwinding 900mm 1100mm 1300mm
Max. diameter of unwinding 600mm 600mm 600mm
Width of slitting 20-900mm 20-1100mm 20-1300mm
Max. diameter of rewinding 400mm 400mm 400mm
Speed 5-150m/min 5-150m/min 5-150m/min
Deviation-rectifying Error ±0.5mm ±0.5mm ±0.5mm
Total power 3kw 3kw 3kw
Weight (approx. ) 1500kg 1800kg 2100kg
Overall dimension(LxWxH) 1100x1600x1400 (mm) 1100x1800x1400 (mm) 1100x2000x1400(mm)

Introduction:
This slitting machine is used for slitting and rewinding various large rolling materials such as paper,(20g/m2-300g/m2) cellophane paper, bill paper, double-face adhesive tape, PVC, weave material, non-woven of cloth, etc. It adopts photoelectric automatic error correction adjustment system for unwinding, anomalistic materials will be easy slit. Equipped with automatic waste film blowing device. Manual material loading for unwinding with taper cover style pneumatic shaft.

Introduction:
This machine is for slitting big paper roll to small paper roll, it suitable for all kinds of kraft paper, tea paperboard grass paperboard calico and art paper.

Main Parameters:
Model Paper slitting machine RYFQ-1600
Technical parameter Control system
Max width mother roll 1600mm PLC Controller Delta(Taiwan)
Min-width finish roll 35mm Main-machine interface WEINVIEW6070i
Max-diameter mother roll 1500mm Tension sensor Hz100kg
Max-diameter finish roll 1300mm Actuator CHNT
Speed of Slitting 0-300m/min Signal component Omron
Slitting capability 60-700gsm Pneumatic component Airtac
winding way Air expansion winding Program edition RYS-RS2.0
Slitting knife Could up to 18sets Inverter YASKAWA 15KW
Paper giving way By hydraulic clamping Length sensor Have
speed regulation control Inverter outfit assemble
Power input According to customer require Loading material Hydraulic clamping type
Size (mm) L*W*H Unloading material Pneumatic
Unwinding machine 3600 *1600 *1200mm Edge correcting motor Y11 60:1
Rewinding machine (B)3000*1600*1200mm
(C)2450*1200*800mm Count meter Automatic
Up-knife specification 2*110*75mm Tension adjust magnetic powder brake
Down-knife specification 4*110*75mm rewind double airshaft
Total weight 5050kg Slitting by clipper,
Drive system Magnetic powder tension control system
Mainframe power 15KW Enclosed component
Mainframe wheeling speed 1400r/min Air compressor no
Liquid compression motor 1.5kw Useful tool have
Way of correcting edge Hydraulic
Driving way Chain driving
Bearing Wanxiang

Feature:
1.Smooth on the both sides of the paper strap after cutting .
2. Hydraulic without shaft type feeding device.
3. Tape tension automatic control, since the plate of rewinding tension remained.
4. Equipped with computer system, automatic correction.
5.Hydraulic shaftless type feeding device
6.Upper and down cutter initiative transmission.

Introduction:
This machine is widely used for cutting paper roll from big roll to small roll, it can work for Material type have: PET, BOPP, PE, paper sticker, paper, compound printing paper and so on.

Technical Parameters:
Model RYFQ-900 RYFQ-1100
Material thickness: 0.012-0.5mmfilm30-350gpaper
Max. Diameter of Raw material: 800mm
(can choose the separated stand, which max. Can put 1400mm)
Paper core: 3#
Max. Effective width of raw material: 800mm 1100mm
Min. Width of Rewinding: 10mm(paper), 5mm(film)
Width of Slitting: 20-800mm
Max. Diameter of rewinding: 500mm
Error-correction length: 150mm
Precision: ±0.15mm
Max. Speed: 350m/min
Slitting speed: 10---350m/min
Total power: 12.5KW
Total weight: 3000KG
Dimension: 2800mm*3400mm*1400mm 3000mm*3400mm*1400mm
Slitting tools: 20sets Standard (can inform the width you want to make, so that we can set the knife basic before send to you)
Upper slitter dimension:
105*75*1.2mm
Brand: shanghai shenlong
Bottom round cutters dimension:
�¦80*20*16mm
Brand: shanghai shenlong
Rewinding shaft 4pcs of air shaft
Diameter of aluminum roller �¦100mm

Function description:
1. Unwinding part
1.Adopts shaftless hydraulic fixing system, easily for one person operation. Using special conic node system, protect the inwall of paper core. Have durable 3 mechanical locking system. 2 pcs of hydraulic clamping oil cylinder moves to each side at the same time, easily operation.
2.2pcs of hydraulic type loading and unloading material oil cylinder can bear 2T material to save the manpower and time.
3.It does not need to input the material thickness, the proximity switch can inspect the unwinding diameter directly which near the transmission shaft. The machine can slow down according to the rest material, in this way, the worker can prepare for the next roller.
4.With the manual adjustment system, the unloading material tightness can be controlled. The adjustable range: +/-20mm
5.Automatic error-correction for the edge position is controlled by the CCD photographic system. The whole frame adopts guide way type to move left and right which driven by the Italy servo motor. The moving part uses thread screw.
6.Pneumatic material connecting device, with the square steel structure, adopts the way of pneumatic and rubber pressing roll to save the material
7.Corridor type feeding materials
8.Unwinding pneumatic brake by shanghai brand

Introduction:
This machine is suitable for surface embossing of rolling paper, film, aluminum film, aluminum foil, etc.
It is an ideal machine for enhancing and aesthetic feeling of the products and decorative effect.

Main Parameters:
Model RYWJ-750B RYWJ-1150B RYWJ-1300B
Embossing Width 700mm 1100mm 1250mm
Embossing Speed 0-60m/min 0-60m/min 0-60m/min
Paper Range 60-300g/m�² 60-300g/m�² 60-300g/m�²
Working Pressure 2-10Mpa 2-10Mpa 2-10Mpa
Main-engines Power 2.2kw 5.5kw 5.5kw
Heating Power 3.0kw 3.6kw 3.6kw
Machine Weight 2300kg 3500kg 4000kg
Overall Dimensions 3200*1750*1600mm 3700*2300*1600mm 3700*2400*1600mm

Introduction:
1. This machine is used to patch windows on look through boxes like cosmetic box, gift box, liquor box, tissue box, napkin box, milk box and etc. It also can be used to paste paper onto partial surface of cardboard.
2. PLC, man-machine interface, photo-electric tracing and central control are adopted on machine to realize auto functions of paper feeding, conveying, window gluing, film slitting, patching and paper collecting before folding boxes.
3. Paper feeding part adopts servo system, realizing precise inch-move, fast-speed paper feeding, stable working state and excellent precision.

Technological Parameters:
Model RYTC-1100
Max. Paper Size 750-1100mm
Min. Paper Size 200-200mm
Max. film Size 500-380mm
Min. film Size 80-40mm
Film Thickness 0.05-0.20mm
Max. Working Speed 6500sheets/h
Cardboard 250-500g/m2
Corrugated Paper 5mm
Total Power 11Kw
Total Weight 2680kg
Overall Dimensions 4998-2998-1750mm (with roller pulled out)

Performance of the machine:
A. RYTC-1100 Window Patching Machine is used for window patching with film for the packing boxes like mobile phone box, wine box, napkin box, clothes box, milk box, as well as greeting card etc. It can also do partial surface gluing and lamination for cardboard (with reinforced paper).
B. The machine uses PLC central control with touch screen and photoelectric tracing to realize automatic paper feeding, paper conveying, window gluing or partial paper gluing for laminating, film notching, film patching and paper delivery.
C. The paper feeding part adopts servo system which ensures accurate inching, high-speed paper feeding, stable working and excellent precision.
D. The film feeding part uses multi-roller-pressed way with servo motor control. Film size can be adjusted and film can be notched and cut at any position.

Introduction:
RYKT-1080B Window Patching Machine can be extensively used in sticking window and line pressing functions.
RYKT-1080B is the Innovation machine of Window Patching Machine, Manufactured &Designed by our technical team.

Technical parameters:
Model RYKT-1080B
Paper Length(B): 200 - 680mm
Double:200-500mm
Paper Width(A): 200 - 1080mm
Double:80-500mm
Film Length(C): 70- 400mm
Double: 70-400mm
Film Width(D): 30 - 500mm
Double: 30-200mm
Paper Caliper: Paper box & cardboard box
250-1000g/m2,
Corrugated/flute up to 3mm
Film Thickness: 0.03 - 0.25mm, OPP, PVC, PET, PE, etc.
Corner cutting and Creasing Line Speed for paper: 4000-7000pcs/h
Normal / standard Pasting speed for film: 6000-10000 pcs/h
(Optional function double line feeding: 8000-14000pcs/h)
Power of Pump: 2.2 kw
Main Power: 2.2 kw
Weight: 3500kg
Dimension: 5500*1900*1600 mm

Introduction:
This machine is applied to the cutting of color printing film, hot shrinkage film, trade marks of battery and purified water, etc.

Performance and Characteristics:
With the essence of its counter parts and unique design, it has the functions of flat cutting special shaped cutting, dotted line pressing, auto adding glue tape. This machine also equipped with microcomputer control, frequency converter timing device, photoelectric tracing, auto counting, energy saving, high speed, high precision, etc.

Main Technical Parameters:
Model RYQJ-350C RYQJ-600C
Effective width 350mm 600mm
Scope of length 0-999mm 0-999mm
Accuracy of position ±0.2mm ±0.2mm
Voltage 220V/50Hz 220V/50Hz
Speed Max. 500pc/min Max. 500pc/min
Power 1kw 1kw
Weight 500kg 900kg
Over dimension(LWH)(mm) 220011001140 220014001140

Introduction:
ROYAL PACKING is professional producer for This sheeting machine (paper sheeter , paper cutting machine ) is suitable for cutting big rolling packaging materials such as paper, paper-plastic, multicolor laminated material, etc. It adopts servo motor (or stepless motor) for controlling constant-length cutting.

Performance and Characteristics:
This sheeting machine (paper sheeter ,paper cutting machine ) is suitable for cutting big rolling packaging materials such as paper, paper-plastic, multicolor laminated material, etc. It adopts servo motor (or stepless motor) for controlling constant-length cutting. It adopts pneumatic, photoelectric sensor for controlling transmission system, with photo, electric, gas together, it has the functions of easy operation, high precision, good stability, low noise. (Pneumatic auto loading device is optional) This machine has the functions of the frequency converter timing device, auto-matic counting, stop working by alarm and tension adjustment by magnetic powder or manual with friction unit.

Main Technical Parameters:
Model RYQJ-800B RYQJ-1100B RYQJ-1300B
Max diameter of material �¦1400mm �¦1400mm �¦1400mm
Max. width of cutting 800mm 1100mm 1300mm
Length of cutting 201200mm 201200mm 201200mm
Precision of fixed length ±0.2mm ±0.2mm ±0.2mm
Speed 10-140times/min 10-140times/min 10-140times/min
Total Power 4kw 4.5kw 5kw
Weight (approx.) 1200kg 1700kg 2100kg
Overall dimension(LxWxH) 2200-1400-1200(mm) 2200-1700-1200(mm) 2200-1900-1200(mm)
Other width if need, we also can make for you .like 1600mm 1800mm

Introduction:
ROYAL PACKING is professional producer for This paper roll cutting machine which is suit for cutting big rolling packaging materials such as paper, PVC, PET film paper plastic, multicolor laminated material, etc. It adopts servo motor(or step motor)

Performance and Characteristics:
1. This paper cutting machines is suitable for cutting big rolling packaging materials such as paper, paper board, kraft paper. Culture paper, Printing paper, laser paper, aluminium foil paper laminated paper, etc. Widely used in paper industry and printing industry.
2. Adopts EU and JAPAN electronic parts, more neatly control with computer and mechanical technic
3. Automatic photocell tracing.
4. AC servo motor drive, high speed cutting steady
5. Adopts imported precision cutting blade, it is in high precision
6. PLC control with touch screen, easy operation
7. Compare with other models, this machine equipped with automatic side guiding system, and tension control system, paper delivery well, and cutting exactly
8. It adopts shaftless shaft loading paper rolls( can be 2 rolls together)
9. It has the functions of easy operation, high precision, good stability, low noise.

Main Technical Parameters:
Machine Model RYHM-1400 Model
Maximum width of roll 1450 mm
Machine power 15kw
Machine weight About 12000kg
Overall size 9500-3300-1800 mm
Power supply 380v/220v/50Hz (three phases)
can be made according to customers customer
Air pressure Max 5.5kg/cm2-5m3/min
Max diameter of roll material 1800 mm
Material thickness scope 50g/600g/according to different material
Cutting Length 4501400mm
Cutting Precision ±0.5mm
Unwind roll inner core 3or 6or according to customer
Cutting speed 350times /min
Cutting style Lower cutter fixing, upper cutter is rotary
Unwinding rolls 2rolls
Height of stacking 1300mm

Introduction:
ROYAL PACKING is professional producer for This paper roll cutting machine which is suit for cutting big rolling packaging materials such as paper, PVC, PET film paper plastic, multicolor laminated material, etc. It adopts servo motor(or step motor)

Main Technical Parameters:
Model RYQJ-800D RYQJ-1100D RYQJ-1400D
Max diameter of material 1400mm 1400mm 1400mm
Max. width of cutting 800mm 1100mm 1400mm
Length of cutting 20-800mm 20-800mm 20-800mm
Reference weight of cutting paper 0.05-1.2mm 0.05-1.2mm 0.05-1.2mm
Precision of fixed length ±0.2mm ±0.2mm ±0.2mm
Speed 10-150times/min 10-150times/min 10-150times/min
Total Power 8.5kw 8.5kw 8.5kw
Weight (approx.) 1200kg 1700kg 2100kg
Overall dimension(LxWxH)mm 3200-1400-1200 3200-1500-1200 3200-1900-1200

Performance and Characteristics:
Adopts pneumatic automatic materials loading system with much easy operation and convenience
Adopts down-up recurrent cutting with orderly finished products and without water caltrop; meantime, it can be used for horizontal cutting and vertical cutting at one time
It adopts servo motor for controlling constant-length cutting.
It adopts computer control, contact screen operation
It adopts pneumatic, displacement sensor for controlling transmission system, with photoelectric, gas together, it has the function of easy operation, high precision, good stability, low noise.
This machine has the function of the frequency converter timing device, automatic counting, stop working by alarm ,magnetic powder tension control, can be vertically, adopt blower fan to get rid of waste
It has the functions of high-precision of cutting, high speed, etc . pneumatic structure combined with computer control be adopted for transmission section ,making it become much more steady operation
It has the function of automatic stacking which is in order . Photoelectric auto tracing subtense system

Introduction:
ROYAL PACKING is professional producer for Sheet Cutter apply the advanced technique of Germany and England. The computer control system apply AC servo motor and AC transducer. The conveyer belt apply NITTA from Japan. The pneumatic vibrator apply FINOLEVA from Switzerland. The electrical system adopts MOELLER&OMRON, the speed of cutting paper is fast and stable. Germany precise bearing and cutting knife assure the high cutting precision.

Specification
Model RYS-1100 RYS-1500 RYS-1700 RYS-1900
Cutting type Synchro- fly twin knife
Applicable range of paper 60-1000GSM
Max. paper roll diameter 1800mm(71)
Max. paper-cutting width 1100mm 1500 1700mm 1900mm
Range of cutting length 450-1450mm 450-1600mm
Cutting sheet number 2sheet
Cutting precision Cutting length 1000mm: ±0.2mm
Cutting length1000mm: ±0.1%
Max. cutting speed 300 cut/min
Max. cutting meter speed 300 m/min
Max. paper stacking height 1300mm 1500mm
Air pressure source requirement 0.8Mpa
Design power 380V/220V50HZ
Gross Weight 12000kgs 16000kg 18000kgs 20000kg

Introduction:
ROYAL PACKING is professional producer for Sheet Cutter apply the advanced technique of Germany and England. The computer control system apply AC servo motor and AC transducer. The conveyer belt apply NITTA from Japan. The pneumatic vibrator apply FINOLEVA from Switzerland. The electrical system adopts MOELLER&OMRON, the speed of cutting paper is fast and stable. Germany precise bearing and cutting knife assure the high cutting precision.

Specification:
Model RYG-1400/1700/1900
Model of cutting paper The upper knife cut reciprocally and the down knife is fixed
Thickness of cutting paper 60-550GSM
(per thickness of per paper are need >60GSM;
Total thickness of all paper are need

Introduction:
MJWP-1 Hydraulic Vertical Waste Baler is used for the press and packing of the waste paperboard, waste cloth corner, plastic film, plastic bottle, grasses, waste fishing net and so on. It compresses the materialâ??s volume, and makes them much easier for storage and transportation.

Characteristics:
1. Classic model, patented products, applicable to compressing and packaging relatively small materials.
2. Electrical button operation control, with safety interlock, and automatic pull out bale device, contribute to safe and high-efficiency operation.
3. Unique design of door in door, B-Style adopts side-open door.
4. Suitable for waste compressing and disposing in living community, marine ship, hospital, hotel, restaurant, school, milk, chemical or drinking line, etc.

Technological Parameters:
Model MJWP10T-1 MJWP30T-1
Hydraulic power (T) 10T 30T
Bale size (L*W*H) mm 600*400*(350-600) MM 1100*700*(650-900) MM
Feed opening size (L*H) mm 540*450mm 1100*500mm
Capability(bales/h) 6-8Bales/hour 3-6Bales/hour
Bale Weight(kg) 50-80kg 150-250kg
Voltage 110V/60HZ(3 phase) 380V/50HZ(3 phase)
Power 2.2kw/3hp 5.5kw/3hp
Machine size (L*W*H) mm 870*780*2150mm 1500*950*3150mm
Machine weight(KG) 600kg 1200kg
Note:The package size can be chosen by yourself. For other model machines, we can produce as customers requirement.

Parameter:
1 Max. Paperboard (A+B)X2 3400MM
2 Min. Paperboard (A+B)X2 1060MM
3 Length of Max. paperboard (A) 1650MM
4 Length of Min. paperboard (A) 350MM
5 Width of Max. paperboard(B) 900MM
6 Width of Min paperboard (B) 180MM
7 Height of Min. paperboard (C+D+C) 400MM
8 Distance of each nail 30-120MM
9 Nails 1-99 nail
10 Machine speed 450 nail/min
11 Horse power 15HP
12 Machine length 3200MM
13 Machine width 2500MM
14 Machine weight 4000KG

Feature:
1 It can stitch single stitches and double stitches
2 Feeding unit adopt automatic counting
3 First stitch stitching position 25mm
4 Available stitching wire: 18#
5 Max. stitching wire length: 600mm
6 Stitching wire feeding length: 38mm
7 One machine can be single piece or two piece, irregular carton
8 Servo control and touch screen monitor operation menu
9 1 minute size change on screen
10 Used for 5/7 layer paperboard carton, carton with bottom but no top also can be work

Main Technical Parameters:
Model RYDP-A4055 RYDP-A4874
Sheet size (before processing) Max. Size 400X520mm 480X740mm
Min. Size 200X275mm 240X280mm
Material Thickness: Die Cutting 0.2mm-0.5mm
127.9 to 400gsm 0.2mm-0.5mm
Max creasing 0.4mm 0.4mm
Final product size
(with separator) Max. size 376mmX520mm 456mmX720mm
Min. size 50mmX80mm 50mmX80mm
Min. discharge width 5mm 5mm
Mold size: Height: 0.8mm 1mm
Max size- 400mmX560mm 480mmX750mm
Min size- 160mmX100mm 160mmX100mm
X, Y direction die cutting accuracy ±0.1mm ±0.1mm
Feeder stack height: 500mm 500mm
Max Production Speed: 6000 cycles per hour 6000 cycles per hour
Main motor power: 4.5kw 4.5kw
Voltage: 200V-240V-50Hz/60Hz Single Phase 200V-240V-50Hz/60Hz Single Phase
Weight- 1100kg 2440kg
Machine size
(L*W*H) Without table (mm) 3680X980X1250 4620X1300X1650
With table (mm) 4380X980X1250 5320X1300X1650

Main Features:
1. Simple structure in linear type ,easy in installation and maintenance.
2. Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
3. High pressure double crank to control the die opening and closing.
4. Running in a high automatization and intellectualization, no pollution
5. Apply a linker to connect with the air conveyor ,which can directly inline with filling machine .

Introduction:
MJMQ-3 Series Rotatory Die-cutting Machine is driven by chain. It is used for die-cutting corrugated paperboard and different kind atypic packages. The advantage of the machine is high efficiency, power save, good safety and so on. This machine use PU roller cover which is imported from Taiwan, the usage life is more than 10million times. The machine has the function of automatically line-speed compensation, this function makes the die-cutting size of the paperboard is exactly right even when the roller cover is attrited. The renovate structure 3times prolongs the life of the roller cover. The feeding system use chain transport. The operation and usage is very easy.

Die-cutting part:
The roller uses high-grade steel, surface is abrasive with hard chromeplated.
Automatically revise the parallel, running stably.
Use PU roller cover which is imported from Taiwan.
The rubber roller have transverse 50mm moving system.
Automatic compensation of the line-speed means: the automatic compensation structure makes each batch carton size same after die-cutting without workers operation.
The roller cover can automatically rehab, this prolongs the use life of the roller.

Technological Parameters:
Model Max. Paperboard size(mm) Min. Paperboard size(mm) Paperboard Thickness (mm) Main Power (kw)
MJMQ-3-2100A 2200*1200 350*350 1-8 5.5
MJMQ-3-2600A 2600*1400 350-350 1-8 5.5
MJMQ-3-2600B 2600-1600 350-350 1-8 6.0

Main Specification:
Model Max. Platen Working Area Max. Gilding Printing Area Skip Order Range Working Pressure Foil-delivered Length Foil-delivered Group Working Speed Main Motor Overall Power Overall Dimensions Total Weight
MJTJ-1-750 750*520mm 740*510mm Built-in Processing With Computer 100T 500mm 2 groups 1380Time/h 2.2kw 10kw 2150*1400*1900mm 2500kg
MJTJ-1-930 930*670mm 920*660mm Built-in Processing With Computer 170T 640mm 3groups 1320Time/h 4kw 13kw 2200*2000*1950mm 3500kg
MJTJ-1-1040 1020*700mm 1020*700mm Built-in Processing With Computer 170T 700mm 3groups 1320Time/h 4kw 13kw 2230*2100*2000mm 4500kg
MJTJ-1-1100 1080*780mm 1080*780mm Built-in Processing With Computer 220T 800mm 3groups 1200Time/h 5.5kw 19kw 2250*2200*2000mm 5000kg
MJTJ-1-1200 1180*800mm 1180*800mm Built-in Processing With Computer 220T 800mm 3groups 1200Time/h 5.5kw 19kw 2250*2200*2050mm 5500kg
MJTJ-2-1300 1300*920mm 1250*870mm Built-in Processing With Computer 380T 870mm 3groups 900Time/h 7.5kw 25kw 2500*2200*2450mm 6500kg
MJTJ-2-1400 1400*1000mm 1350*950mm Built-in Processing With Computer 380T 950mm 3groups 900Time/h 7.5kw 25kw 2600*2200*2500mm 7200kg
MJTJ-2-1500 1500*1050mm 1450*1000mm Built-in Processing With Computer 380T 1000mm 3groups 900Time/h 7.5kw 25kw 2700*2200*2600mm 8000kg
MJTJ-2-1600 1600*1250mm 1550*1200mm Built-in Processing With Computer 380T 1200mm 3groups 900Time/h 7.5kw 35.5kw 2800*2200*2600mm 12500kg

Main Specification:
Model Inner Chase Size Speed Max.Rule Length Motor Power Machine Weight Packing (overall) Dimensions
MJRY-1-401C 750*520mm 25

Introduction:
This machine is used for connection two pieces paperboard by glue to making big carton. It is suitable for E, C, B, A, AB flute corrugated paperboard. Can produce single-pieces, two pieces glued carton. This machine can work with most kinds quality paperboard, the glue gun spray system can set independently, can produce heterogenic shaped carton, flat carton and single piece box, especially for large, high strength corrugated artificial difficult production.

Functions:
1. Average speed is 60m/min.
2. With independent cold glue system, hot melt glue system.
3. Use SIEMENS man-machine interface, the operation is simple and convenient.
4. The adjustment of machine is easy and fast, 5-15mins can change order.
5. Suitable for E, C, B, A, AB flute corrugated paperboard, suitable for work on heterogenic shaped carton, flat carton and single piece box.
6. According to different product, can choose to use Hot melt glue, cold glue, or both use together. (If use together, the width of glue part should be bigger than 35mm.)

Main Technological Parameters:
Model RYSP-1600 RYXD-2400 RYXD-3000
Max. paperboard size (L*W) mm 3200 4800 6000
Min. paperboard size (L*W) mm 1060 1060 1060
Max. carton length (mm) 1450 2250 2850
Min. carton length (mm) 350 350 350
Max. carton width (mm) 800 1270 1500
Min. carton width (mm) 180 180 180
Min. carton height (mm) 400 400 400
Machine speed 60m/min 60m/min 60m/min
Power 18HP 18HP 18HP
Machine length (mm) 3200 6000 6000
Machine weight 2900kg 4000kg 4200kg
Gluing length (mm) 1500 2000 2000
Cover height 500mm 500mm 500mm
Glue (cold) White glue White glue White glue
Glue (hot) M-858IB M-858IB M-858IB

Main Parameters:
Model MJBL-4-950 MJBL-4-1324
Max. feeding size 950*2200mm 1270*2400mm
Min. feeding size 270*600mm 380*600mm
Max. Printing Area 950*2000mm 1250*2200mm
Min. Slotting space (mm) 280*80*280*80 (normal knife)
160*160*160*160 (Reverse knife)
Max. Slotting depth 240mm 320mm
Printing plate thickness 7.2mm 7.2mm
Paperboard thickness 2-11mm 2-11mm
Max. machine speed (pcs/m) 0-70pcs/min 0-70pcs/min
Printing precision +-1.0mm +-1.0mm
Slotting precision +-1.5mm +-1.5mm

Package size & Weight:
Model MJBL-4-950 MJBL-4-1324
Feeding part 2.6*0.6*2.2m, 600kg 2.8*0.6*2.2m, 700kg
Printing unit 3.8m*0.5m*2.2m, 2000kg 4.0m*0.6m*2.2m, 2200kg
Slotting unit 3.8m*0.6m*2.2m, 2100kg 4.0m*0.65m*2.2m, 2400kg
Die-cutting unit 3.8m*0.65m*2.2m, 2100kg 4.0m*0.70m*2.2m, 2500kg

Technological Parameters:
Model RYKB-1630
Printing units Can be chosen according to users' needs
Printing Paperboard A.B.C.E flute 3/5/7 ply corrugated paperboard
Machine Speed 150 PCS/min
Max. Paper Size 1600Ã??3000 mm
Max. Printing Size 1600Ã??2800mm
Max. die cutting size 1600Ã??2950mm
Min. Paper Size Positive knife 420�?700mmï¼?
Inverse knife 420Ã??800mm
Printing-plate adjustment
left and right position 10mm
Standard Printing Plate Thickness 4-9mm
Cardboard thickness 2-12mm
Max. Slitting corner width 50mm
Max. stack height 1600mm
Printing Roller
(Plus printing plate thickness) 535mm

Characteristics:
u. Control system: PLC controlling, production order can be saved and recalled to save changing time. Memorize system for easy operation and maintenance.
u. Double servo feeding system,each row of feeding wheels is driven by independent servo motor, high precision and low noise, no feeding rollers in feeder to prevent the corrugated wave from damaging.
u. Printing: Adopt famous brand anilox roll and rubber roll to ensure high-quality printing.
u. Slotter: computerized set the box length, width and box height, fast and convenient.
u. Die cutter: independent engine drive controlled by KEB servo system from Germany to ensure the die cutting accuracy. Surface speed compensation system. Die cylinder shifts when running to prolong the life of rubber anvil.
u. Gears are made of high-quality chrome steel, heat treated and grinded to ensure the high stability and precision.
u. Bearings and electrical components are all famous brand in Taiwan and in China.

Characteristics:
1. Automatically stack and collect the paperboard;
2. Vertical paperboard collecting use width belt for transportation;
3. Using 16 welded channel steel;
4. Adopts electric adjust cardboard size, pneumatic control the transversely output of paperboard, electrical output;
5. Number of cardboard sheets or height is controlled by a pedal switch;
6. Vertical cardboard stacker adopts wide flat conveyor belt.

Main features:
Items MJDM-4-1200
Design speed 100m/min
Economical Working Speed 80m/min
Working width 1200mm
Max. length of paperboard 2500 mm
Max. height of paperboard 200 mm
Gas: 0.4 - 0.9Mpa
Steam pressure 0.8 - 1.3Mpa

Items Description
Main transport motor 3.0KW 380V 50HZ
Transversely output motor 1.5KW 380V 50HZ
Running power 1.5KW 380V 50HZ

Introduction:
The machine adopts vacuum adsorption auxiliary paperboard feeding system (air volume is adjustable), with the function which can complete the slotting, angle-cutting, slitting, creasing etc. of corrugated paperboard in one time. Slotting depth of this machine is with electric adjustment, and equipped with the scale reading. Slotting phase adjustment is to the planetary gear structure, adopting the electric computer type 360 degrees adjustment, and the upper and lower slotting knife disc and creasing wheels can synchronous moving to left or right, (note: some special tool to adjust the movement), it is easy to use and maintenance, compact, which is a professional in view of the small carton slotting forming equipment.

Main Parameters:
Model MJKC-2-600
Max feeding size (LÃ??W) 1800mmÃ??600mm
Min feeding size (LÃ??W)
450mmÃ??180mm
Machine max speed 80pcs/min
Min height of box (H) 70mm
Slotting distance 80X80X80X80MM
Slot knife thickness 5mm
Knives quantity 4set slotting knives
Dimension (Length*Width*Height) 2500mmÃ??1500mmÃ??1280mm
Weight 1300 KG

Main Characteristics
Paper feeding roller adopts patterned roller, feeding roller pressure adopts eccentric wheel adjustment with left and right eccentric wheels, can adjust the pressure synchronously .
Back kick feeding department adopts both sides and back baffles to fasten paperboard, to avoid the slotting error to make upper paperboard misplace when pushing paperboard, can fit to each kinds of paperboard with different quality , and sending paper stable and accurate.
Slotting knife discs adopt full steel processed , slotting knives adopt sawtooth arc-shaped semicircle knives to slot and remove the waste, paperboard get into slitting roller after slotting, slitting knives cut both sides of the paperboard neatly . ( note : pressing wheel and slitting knives are installed in same roller, convenient to adjust )
Paperboard is sent out by six transmission shafts after slotting, corner-cutting, creasing and slitting . This machine power is equipped with the frequency speed controller (speed is adjustable freely), adopting JTE frequency converter.
This machine adopts electric planetary gear phase adjustment to adjust the paperboard size, can adjust without stopping.

Function and Features:
1.Adopt front-scoring feeding, back double rubber roll leading paper, paperboard running steady
2. Slitting part: adopt high quality tungsten steel blade, sharp and long work-life, slice more tidy, non-pressing and non-burr.
3. Scoring part: adopt 5 points scoring, scoring distance in-phase adjust, blazonry and easy to bend the carton sheet.
4. Grinding part: adopt automatic and manual two kinds pneumatic grinding type, it could be grinding when working, improve work efficiency.

Technological Parameters:
Model MJBD-2-2000 MJBD-2-2200 MJBD-2-2400
Max paperboard size (mm) 1900 2100 2300
Max mechanical speed 100pcs/min 100pcs/min 100pcs/min
Blade knives 4 knives 4 knives 4 knives
Presslines 6 pairs 6 pairs 6 pairs
Min slitting width (mm) 130 130 130
Min pressing width (mm) 30 30 30
Outer diameter of the thin blade 220mm or 200mm 220mm or 200mm 220mm or 200mm
Thickness of the thin blade 1.2mm(steel), 1.4mm (alloy) 1.2mm(steel), 1.4mm (alloy) 1.2mm(steel), 1.4mm (alloy)
Power 4.0KW 4.0KW 4.0KW
Pneumatic pressure ï¼?0.4mpa ï¼?0.4mpa ï¼?0.4mpa
Machine size (mm) 2600Ã??1600Ã??1500 3000Ã??1600Ã??1500 3200Ã??1600Ã??1500
Machine Weight (kg) 1550 1950 2500
18000RMB 19000RMB 20000RMB
Note: For the Thin Blade, you can choose the quantity of knives and press lines. For the sizes, we can make as custome's requirement.

Specificationsï¼?
Model MJBZJ-1-1300 MJBZJ-1-1450 MJBZJ-1-1600
Maximum size (W*L) 1300*1100mm 1450*1450mm 1600*1400mm
Minimum size (W*L) 380*380mm 380*380mm 400*400mm
Max Machine Speed 6000sheets/h 6000sheets/h 6000sheets/h
Total power 11.65kw 11.65kw 15.3kw
Total weight 6800kgs 7200kgs 8000kgs
Dimensions (L*W*H) 14800*2150*2500 mm 14800*2300*2500 mm 15570*2450*2500 mm
Top paper 200-600GSM
Bottom paper A B C D E F G Flute corrugated board,
Cardboard more than 250 gsm.

Performance of the machineï¼?
1. MJBZJ Series Automatic Flute Laminator adopts chain pusher and back registration system together with spring blade side lay and vacuum sucking conveying system makes this series of machine fit for a larger range of paper, high precision while remaining the features of easy operation and maintenance.
2. The core designed rubber roller together with knurled steel roller enhances the evenness of gluing, strength of stickiness, as well as lowering the production cost.
3. Balance-tested rollers, tight assembling technique, plus timing and tooth belt driving mechanic system makes the machine runs at low noise with high precision.
4. The machine adopts automatic glue supply and recyclable glue circulating system
5. Self-developed high-strength feeder compliant with high configuration electric system makes the machine run at low malfunction and stable. The electric parts used are all world wide available brand or well-known Chinese brand.
6. All material are inspected according to ISO-9001 standard and the key parts such as the harmonic gear and bearings are imported ones.
7. The bottom sheet for this machine can be A,B,C,E,F flute corrugated sheet as well as cardboard not less than 250gsm. It can do 3 or 5 ply board to sheet lamination or board to board lamination. The range for top paper can be 200-800 GSM or 3 ply laminated board with top paper advance or alignment function.
8. Less vibration and low noise.
9. CE certificate available.
10. Gluing even: 25-35gsm. Quite cost effective for your production.
11. Side lay registration is installed on the machine.

Characteristics:
1. Air suction feeding is used for bottom paper. Automatic follow up and continuous feeding is achieved according to the speed of top paper, paper feeding sheet by sheet by manual is not required.
2. Personalized design for top sheet, it is front fed, more convenient feeding, faster laminating speed.
3. Advanced elastic front register is used for location, high register precision, bottom paper will never exceed. When laminating, it is very easy to make top paper and bottom paper alignment, or top sheet exceeded.
4. Fully automatic glue supply system: glue will be automatically supplied during lamination, and recovered, avoiding glue wasted.
5. Scientific design for linear speed of metering roller, avoiding glue thrown when high-speed running.
6. PLC touch screen is adopted, sententious, visual.
7. The whole machine adopts PLC control system, compared with other time-delay device or middle relay control, the bottom paper is transferred more precise and stable, furthermore, speed is greatly increased, and circuit breakdown can automatically display and alarm.
8. Clean the lower roller in gluing section by blade with circulated water, complete cleaning, convenient to replace the blade
9. Imported components are used in electrical section to ensure the machine run stably.
10. Floating movable pressing section is adopted to make the laminated paperboard smooth. This section can be moved front and back to take in paper conveniently.
11. Pressure of impression roller is one-side adjusted by nut of screw lead, convenient and fast.
12. The machine can work with laminating cardboard to A/B/C/D/E corrugated board, and bottom cardboard more than 350gsm to paperboard.

Maim Technological Parameters:
Model
Items MJBZB-1-1300 MJBZB-1-1450 MJBZB-1-1700
Max. Paper Size (W*L) 1300 *1300 mm 1450 *1450 mm 1700 *1700 mm
Min. Paper Size (W*L) 300 * 350 mm 300 * 350 mm 300 * 350 mm
Speed 95 m/min. 95 m/min. 95 m/min.
Total Power 6.9 kw 8.7 kw 10.5 kw
Total Weight 3800 kg 4000 kg 4500 kg

Main Parameters:
Model RYDB-600 RYDB-750 RYDB-1000 RYDB-1200
Maximum Packing Size W550 * H450 W700*H650 W950 * H850 W1150*H 900
Minimum Packing Size 100 150 200 300
Max Bundling Depth 300 300 300 300
Weight 181kg 191kg 210kg 230kg
Total Power 0.37kw 0.37kw 0.37kw 0.37kw
Dimensions ( L*W*H) 820*1050*1320 820*1250*1600 1240 * 1450*1950 1300*1450*1950

Main features
The mechanical clutch with features of long life span and low cost.
Beak using Chromium-molybdenum alloy processed by a special CNC procedure makes it anti-wear and knot tidy.
72 hours test run before delivery which is ensuring the quality and stability, make the knot failure rate lower than 2°.
Time, cost and manpower saving.
Easy for operation, no need for special training.
No need to adjust different size bundling.
Safe and simple operation.

Standard Features:
1. Based on Germany core technology.
2. Touch screen control system, automatically early warning and prompt fault location.
3. Most advanced high speed automatic strap threading technology.
4. Thermostatically controlled 24 volt heat-weld sealing system; Wear-free DC Drive, brushless motor technology.
5. PLC Control; Equipment control system upgrade effects with the use of belt conveyor to transfer stacker of carton boxes, conveyor speed can be adjustable.
6. Strapping tension can be adjustable with digital input; can select single strapping or double strapping.
7. Belt conveyor worktable can better protect stack of carton boxes and can be integrated into most production lines.
8. Quickly set up the operating methods, strapping positions, strapping tension, etc.
9. Pneumatic device of the strapping machine, the size of air pressure can be adjustable to meet customersâ?? requirements for strapping tension.
10. Machine Color: Optional.

Technological Parameters:
Model RYKA-Y5
Standard machine grade PP straps: 5-12mm (optional)
Strap coil Dispenser: Core Diameter: 200mm; Core width: 190mm
Electrical power: 220V, 50Hz, 1ph, 16A CEE-Plug
Energy consumption: About 2.5KVA
Power Consumption: 6 Bar compressed air, �¼â??â?? rapid cluth
Machine height: 700-850mm (adjustable), special sizes can be customized
Frame size (Standard) 800*600mm, 1250*500mm, special sizes can be customized.
Strapping speed: 20-26 pack/min for single strapping (depending on the carton size) at table belt speed of 0.6m/s. (E.g., if the stack of carton boxes is 20per package, then it can be strapping 25000 or more Carton boxes per hour.)
10-16 pack/min for double strapping (depending on the carton size) at table belt speed of 0.6m/s. (E.g., if the stack of carton boxes is 20per package, then it can be strapping 14000 or more Carton boxes per hour.)

QUOTATION:
RYKA-Y5 Inline Strapping Machine Price: USD26800.0/unit FOB Tianjin port.
Delivery time: In 70days after we receive your deposit.
Payment term: 40% TT in advanced as deposit, and 60% TT after your check and test the machine before shipment.
Package: Steel pallet
Price Valid time: 20days.

Introduction:
MJZXJ-2 Semi-auto Carton Gluer Machine is new machine for carton production in recent years. It is mainly used for the glue of the carton. It can glue for 3-layer, 5-layer, 7-layer paperboard and so on. The machine structure is easy, working is stable, operation is simple, production efficiency is high, gluing quality is good, production cost is very low. The cost is 15times lower than steel wire stitcher machine.
Machine structure: Machine frame, up and down working-table, front transport equipment, front revising equipment, middle transport equipment, middle press equipment, finished product side output equipment, electrical control equipment.


Characteristics:
1. Easy and reliable operation system.
2. Novel design of the whole machine.
3. High-speed changing sizes.
4. Automatically counting and strap setting.

Technological Parameters:
Model MJZXJ-2
Max. Size (L+W)*2 2460mm
Min. Size (L+W)*2 340mm
Max. Size (W+H)*2 1515mm
Min. Size (W+H)*2 240mm
Paperboard feeding height 900mm
Power 2.2kw
Mechanical Speed 40m/min
Machine Packing Size 4.5*1.95*2.0m
Machine Weight 2000KG
Note: We can produce different size machine as customers requirements.

Equipments List
Equipments Name MJT-80-1800
Economical MJT-120-1800
Standard MJT-150-1800
High-speed
Mechanical Roll Stand (include the paper roll rail.) 3
Hydraulic Roll Stand (include the paper roll rail.) 3 3
Pre-heater 600mm 1
Pre-heater 800mm (Ground) 2 2
Vacuum Single Facer (Roll280), gimbal drive 1
Vacuum Single Facer (Roll320), gimbal drive 1 1
Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1
Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1 1
Double preheater 600mm 1
Double preheater 800mm 1 1
Double Gluer - A 1
Double Gluer - B 1 1
Double baker (600mm X12heat plates, 4.5meter cooling part.) 1
Double baker (600mm X14heat plates, 5meter cooling part.) 1
Double baker (600mm X16heat plates, 6meter cooling part.) 1
Thin Blade (Simple electrical adjust.) 1
NC Thin Blade 1 1
NC Cutter 1 1 1
Conveyor and Stacker 1 1 1
Glue system 1 1 1
Steam system 1 1 1

Introduction:
This machine adopts suction belt for feeding paper. It has the function of slitting and pressing at one time. The standard model is four knives and six lines. The power of this machine is divided into three parts. The first power motor is the belt paper feeding part, which adopts variable frequency speed regulation. To control the speed of paper feeding time, the second part of the power motor is the paper slitting and line pressing part. The frequency conversion speed regulation can make the paper slitting speed adjustable, and it is used at a differential speed with the paper feeding motor speed. The third part of the motor is a suction paper feeding motor. When the cardboard is too large or warped, the suction fan is turned on to make the maximum area of the cardboard contact the paper feeding belt to achieve smooth paper feeding. The pressure of the paper feeding shaft and paper separation shaft are all mechanical and manual. Adjust, the upper shaft pressure rises and falls by twisting the pressure handle, and the pressure is adjusted in a coordinated and balanced manner on both sides.

Product Parameter
Model MJKC-3-2000
Max. feeding speed 80m/min
Slitting precision ±1.0mm
Slitting knives distance 60mm
Max. work size 1800mm X 1200mm
Min. work size 450mm X 170mm
Suction motor power 4KW
Feeder motor power 1.5KW
Slitting motor power 0.4KW
Total Power 5.9KW

Main Parameters:
Model RYWJ-750B RYWJ-1150B RYWJ-1300B
Embossing Width 700mm 1100mm 1250mm
Embossing Speed 0-60m/min 0-60m/min 0-60m/min
Paper Range 60-300g/m�² 60-300g/m�² 60-300g/m�²
Working Pressure 2-10Mpa 2-10Mpa 2-10Mpa
Main-engines Power 2.2kw 5.5kw 5.5kw
Heating Power 3.0kw 3.6kw 3.6kw
Machine Weight 2300kg 3500kg 4000kg
Overall Dimensions 3200*1750*1600mm 3700*2300*1600mm 3700*2400*1600mm

Technological Parameters:
Model RYTC-1100
Max. Paper Size 750-1100mm
Min. Paper Size 200-200mm
Max. film Size 500-380mm
Min. film Size 80x40mm
Film Thickness 0.05-0.20mm
Max. Working Speed 6500sheets/h
Cardboard 250-500g/m2
Corrugated Paper 5mm
Total Power 11Kw
Total Weight 2680kg
Overall Dimensions 4998x2998x1750mm (with roller pulled out)

Introduction:
MJMQ-1 Series Rotatory Die-cutting Machine is designed as sun feeding. It is used for die-cutting corrugated paperboard and different kind atypic packages. The advantage of the machine is high efficiency, power save, good safety and so on. This machine use PU roller cover which is imported from Taiwan, the usage life is more than 10million times. The machine has the function of automatically line-speed compensation, this function makes the die-cutting size of the paperboard is exactly right even when the roller cover is attrited. The renovate structure 3times prolongs the life of the roller cover. The feeding system use chain transport. The operation and usage is very easy.

Technological Parameters:
Model Max. Paperboard (mm) Min. Paperboard (mm) Thickness (mm) Feeding speed (pcs/min) Power of main motor Machine Weight
MJMQ-1-17A 1700-1200 350-500 11mm 0-200 4.0kw 4500kg
MJMQ-1-20A 2000-1200 350-500 11mm 0-180 5.5kw 5000kg
MJMQ-1-24A 240001400 400-600 11mm 0-160 7.5kw 6000kg
MJMQ-1-28A 2800-1600 400-600 11mm 0-160 15.0kw 6000kg

Main Specification:
Model Inner Chase Size Speed Max.Rule Length Motor Power Machine Weight Packing (overall) Dimensions
MJRY-1-401C 750*520mm 25

Main Technological Parameters:
Model RYSP-1600 RYXD-2400 RYXD-3000
Max. paperboard size (L*W) mm 3200 4800 6000
Min. paperboard size (L*W) mm 1060 1060 1060
Max. carton length (mm) 1450 2250 2850
Min. carton length (mm) 350 350 350
Max. carton width (mm) 800 1270 1500
Min. carton width (mm) 180 180 180
Min. carton height (mm) 400 400 400
Machine speed 60m/min 60m/min 60m/min
Power 18HP 18HP 18HP
Machine length (mm) 3200 6000 6000
Machine weight 2900kg 4000kg 4200kg
Gluing length (mm) 1500 2000 2000
Cover height 500mm 500mm 500mm
Glue (cold) White glue White glue White glue
Glue (hot) M-858IB M-858IB M-858IB

Main Parameters:
Model MJBL-4-950 MJBL-4-1324
Max. feeding size 950*2200mm 1270*2400mm
Min. feeding size 270*600mm 380*600mm
Max. Printing Area 950*2000mm 1250*2200mm
Min. Slotting space (mm) 280*80*280*80 (normal knife)
160*160*160*160 (Reverse knife)
Max. Slotting depth 240mm 320mm
Printing plate thickness 7.2mm 7.2mm
Paperboard thickness 2-11mm 2-11mm
Max. machine speed (pcs/m) 0-70pcs/min 0-70pcs/min
Printing precision +-1.0mm +-1.0mm
Slotting precision +-1.5mm +-1.5mm

Package size & Weight:
Model MJBL-4-950 MJBL-4-1324
Feeding part 2.6*0.6*2.2m, 600kg 2.8*0.6*2.2m, 700kg
Printing unit 3.8m*0.5m*2.2m, 2000kg 4.0m*0.6m*2.2m, 2200kg
Slotting unit 3.8m*0.6m*2.2m, 2100kg 4.0m*0.65m*2.2m, 2400kg
Die-cutting unit 3.8m*0.65m*2.2m, 2100kg 4.0m*0.70m*2.2m, 2500kg

Machine introduction:
This machine is component with the feeding unit, printing unit, slotting unit, rotary die-cutting unit and stacker, can accomplish the process of the corrugate paperboard printing, slotting and die-cutting.
The materials of the body is HT250,thickness of body is 60mm,after second stage annealing ,making by CNC machine, with high strength and high precision.
All the transmission gear is spiral gear, with low noise and high precision, gears after high frequency heating and grinding, adopt automatic circle lubrication.
The gear material is 20CrMnti alloy steel, after high frequency heating and grinding. and the main transmission gear and roller adopt expansion sleeve connection.
Bearing adopt the famous brand made in China like HRB and WANXIANG.
The mail motor adopt frequency converters adjust, the frequency is Delta brand made in Taiwan, the PLC also adopt Delta brand made in Taiwan, the contactor adopt Seimens brand.
The rubber roller adopt Jizhou Chunfeng Yinxing rubber roller, famous brand in China.
Anilox roller adopt Haili brand, famous brand in China.

Introduction:
ROYAL PACKING is professional producer for Flexo Printing & Slotting & Die-Cutting Machine, also include flexo folder gluer machine, which is Flexo printing & Slotting & Die-cutting & Inline folder gluer & Inline strapping. It is mainly used for printing the 3-layer, 5-layer, 7-layer corrugated paperboard, from 1color to 7color. We can design high precision printing for you also based on your requirement. Speed from 100pcs/min to 400pcs/mins for option.

Technological Parameter:
Working Width 1200mm 1400mm 1600mm 1800mm
Heating method Steam heating
Design speed 100m/min
Economical speed 60-80m/min
Compress-air pressure 0.4-0.9MPa
Flute type Standard flute UV Flute
Standard spec. A,B,C,E,F
For other type and model, we can produce as customers requirement.

Equipment name UNIT QTY Remark
Hydraulic shaftless mill roll stand unit 2 Spindle 240mm, hyperbolic heavy rocker, expand chuck , multi-point brake, hydraulic drive lifting, panning left and right on the middle. Guide rail length 6000mm use of plate welding.
Rail length 6000mm trolley used 10mm plate welding.
Paper trolley unit 4
Top paper preheat cylinder unit 1 roller  600mm including pressure container certificate. Electric adjustment wrap angle. Wrap angle can adjust the paper preheat area in the range of 360�°.
Core paper preheat cylinder unit 1 roller ï¿ 600mm including pressure container certificate. Electric adjustment wrap angle. Wrap angle can adjust the paper preheat area in the range of 360�°.
Transport Bridge Unit 1 Independent AC motor drive up, transportation.
Square Fingerless type single facer (B & E) unit 2 Corrugated main roller 320mm material with 48CrMo alloy steel. Tile roll modular group lifting transfer. Airbag ballasting structure import main bearing PLC automatic control glue HMI touch screen Breaks automatic parking relief steam heating way.
NC Cutter with slitting and automatic Stacker Unit 1 Full automatic AC Servo control, computer control NC cutter, HMI touch screen, stacker output the paper with different steps, max. stack length is 1.5m. Helical knife.
Glue mixing tank unit 1 Customers -owned pipeline. Glue configuration is composed by carrier tank, main tank, storage tank, and send plastic pump, back plastic pump.

Technical Parameters:
Model RYSD-830A
Blade thickness(mm) 0.71 - 1.05
Blade height(mm) 8 - 32
Max. bending angle 100°
Min. ARC radius of 90 degree 0.4
Front Min. bending size 1.0
Back Min. cutting size 1.0
Feeding precision ±0.03
Bending flatness ±0.2
Functions Automatic Bending, Straight cut, Muti-bridging, Lipping cut.
Optional function Perforating, for 2pt/3pt cutting rules fix height 23.8mm, tools sizes or perforating sizes1mm width (Adjustable by software), 2mm depth fixed.
Hole punching, diameter is 5.5mm (standard), cutting rules downside to centre of hole height is from 9 to 14mm (Adjustable).
Bridge width Over 5.5 mm any sizes available.
Bridge height 15mm & 18mm
Cutting methods Swing cutting or Auto flat cutting
Optimal pattern format DXF format (Auto CAD,Core Draw)
Air supply 0.6mpa
Power supply Three-phase power 380V 50/60HZ (Standard)
Machine total power Around 1.3 to 1.5 kw
Gross weight. Around 500kgs
Overall dimension 2650 1050 1350mm(L W H)
Recommend spare parts One set bridge tools, One set cutting tools
H.S. Code 8462219000

Introduction:
ROYAL PACKING is professional producer for Corrugated cardboard production line in China. We can produce the 3 ply, 5 ply and 7 ply corrugated cardboard production line, Widths from 1000 to 2500mm, production speeds from 60 to 250 meters/min. We can offer reasonable project to meet customers requirements.

More Details:
Main Equipment List
Equipments Name MJT-80-1800
Economical MJT-120-1800
Standard MJT-150-1800
High-speed
Mechanical Roll Stand (include the paper roll rail.) 3
Hydraulic Roll Stand (include the paper roll rail.) 3 3
Pre-heater �¤600mm 1
Pre-heater �¤800mm (Ground) 2 2
Vacuum Single Facer (Roll�¤280), gimbal drive 1
Vacuum Single Facer (Roll�¤320), gimbal drive 1 1
Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1
Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1 1
Double preheater �¤600mm 1
Double preheater �¤800mm 1 1
Double Gluer - A 1
Double Gluer - B 1 1
Double baker (600mm X12heat plates, 4.5meter cooling part.) 1
Double baker (600mm X14heat plates, 5meter cooling part.) 1
Double baker (600mm X16heat plates, 6meter cooling part.) 1
Thin Blade (Simple electrical adjust.) 1
NC Thin Blade 1 1
NC Cutter 1 1 1
Conveyor and Stacker 1 1 1
Glue system 1 1 1
Steam system 1 1 1

Introduction:
ROYAL PACKING is professional producer for Corrugated cardboard production line in China. We can produce the 3 ply, 5 ply and 7 ply corrugated cardboard production line, Widths from 1000 to 2500mm, production speeds from 60 to 250 meters/min. We can offer reasonable project to meet customers requirements.

More Details:
Main Equipment List
Equipments Name MJT-80-1800
Economical MJT-120-1800
Standard MJT-150-1800
High-speed
Mechanical Roll Stand (include the paper roll rail.) 3
Hydraulic Roll Stand (include the paper roll rail.) 3 3
Pre-heater 600mm 1
Pre-heater 800mm (Ground) 2 2
Vacuum Single Facer (Roll280), gimbal drive 1
Vacuum Single Facer (Roll320), gimbal drive 1 1
Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1
Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1 1
Double preheater 600mm 1
Double preheater 800mm 1 1
Double Gluer - A 1
Double Gluer - B 1 1
Double baker (600mm X12heat plates, 4.5meter cooling part.) 1
Double baker (600mm X14heat plates, 5meter cooling part.) 1
Double baker (600mm X16heat plates, 6meter cooling part.) 1
Thin Blade (Simple electrical adjust.) 1
NC Thin Blade 1 1
NC Cutter 1 1 1
Conveyor and Stacker 1 1 1
Glue system 1 1 1
Steam system 1 1 1

Introduction
MJNC-1 High Speed NC paperboard cutter is mainly used for the transversely cutting of the corrugated paperboard, single-face paperboard, industrial paperboard. It is connected to the high-speed 7-layer, 5-layer, 3-layer corrugated paperboard production line and single-facer line. It has high working speed and high cutting precision. The Computer control system use German servo control technology. The technology is advanced all over the world.
Characteristics
1. Computer control intercourse servo controller drives the motor working, has high cutting precision.
2. Have following special functions: Order can be real-time input, the computer can save many different orders, edit, modify, save, real-time monitor (parameters of speed, cut length, rest length, production process and so on.), automatically change order (change in order, change by force), output, alarm for the rest order and so on.
3. Instantaneously control cutting length and numbers, can modify, add or cancel at any moment.
4. The transmission gears are dealt with grinding, spray lubrication.
5. High-quality alloy spiral knife, exactly gears driving, cutting is stable and smooth.
6. Intercourse servo cutting control, high precision, high efficiency and high credibility.
7. Frequency conversion control the transportation of input & output paperboard, synchronize with the production line.
8. Certain length, color-mark tracing the cutting, automatically change order.
9. Colorful touch-screen for easy operation, control and monitor.
10. Run in-phase with the paperboard production line.

Specifications
Model MJNC-1-1800 MJNC-1-2200
Width 1800mm 2200mm
Cutting length 50 - 9999mm 50 - 9999mm
Order keeping 999orders 999orders
Cutting precision ±1mm ±1mm
Max.design speed 200m/min 200m/min
Economic production speed 180m/min 180m/min

Introduction:
MJNC-6-120 Automatic Stacker machine is used for booking the paperboard with order quantity. The machine is composed by transport part, and booking part. It is suitable for the flute B, E, F, G, single cardboard, or small flute 3-layer paperboard.

Specification:
--the host base and wall use ferrosteel, and strong vibration resistance.
-- 10.4 inch colorized touch screen made in Taiwan Eview .
-- Auto calculate delivery to the stacking output board, the maximum accumulation of 1.6 m in length.

Main Technological Parameters:
-- The maximum working width: 1600 mm
-- Design speed: 120m/min.
-- Running speed: 100m/min.
-- Mechanical configuration: computer helical cutting knife
-- Max. Length of stacking cardboard: 1600mm,

Characteristics
1. Computer control intercourse servo controller drives the motor working, has high cutting precision.
2. Have following special functions: Order can be real-time input, the computer can save many different orders, edit, modify, save, real-time monitor (parameters of speed, cut length, rest length, production process and so on.), automatically change order (change in order, change by force), output, alarm for the rest order and so on.
3. Instantaneously control cutting length and numbers, can modify, add or cancel at any moment.
4. The transmission gears are dealt with grinding, spray lubrication.
5. High-quality alloy spiral knife, exactly gears driving, cutting is stable and smooth.
6. Intercourse servo cutting control, high precision, high efficiency and high credibility.
7. Frequency conversion control the transportation of input & output paperboard, synchronize with the production line.
8. Certain length, color-mark tracing the cutting, automatically change order.
9. Colorful touch-screen for easy operation, control and monitor.
10. Run in-phase with the paperboard production line.

Specifications
Model MJNC-2-1400 MJNC-2-1800 MJNC-2-2200
Width 1400mm 1800mm 2200mm
Cutting length 50 - 9999mm 50 - 9999mm 50 - 9999mm
Order keeping 999orders 999orders 999orders
Cutting precision ±1mm ±1mm ±1mm
Max.design speed 150m/min 150m/min 150m/min
Economic production speed 120m/min 120m/min 120m/min

Structural feature:
It can save 200 units orders replace the cutter specifications quickly and accurately changing orders without stop, And enables networked computers to facilitate production management.
Knife shaft drive gears are precision forged steel induction hardening, backlash-free transmission, advanced keyless connection, high transmission accuracy.
Cutting machine adopts inlaid front steel blade knife spiral structure, serrated knife. scissors, shears, shear force, long blade life.
around feed rollers are used the sun gear platen way, smooth delivery, pressure evenly, easy to crush plate board or cause blockage.
This model is the braking energy storage (non-dynamic braking), so the energy consumption in the production process, the average electricity consumption is 1/3 of an ordinary NC cutting machine, saving more than 70% power to reach the goal of saving money .
Precision adjustable no gap gear to ensure precise blade engagement, running balance.
Using an independent oil pump and filter with two copper distribution in each gear position oil, lubrication and cooling.
Knife roller: fine quality forged steel material, the balanced, with good stability.
Technical parameters:
1. Effective width: 1800mm
2. Operation direction: left or right (determined to the customers factory)
3. Highest machinery speed: 200m/min, Economic running speed: 150m/min.
4. Mechanical configuration: computer-control helical cross cutter
5. Minimum cutting length: 500mm
6. Maximum cutting length: 9999mm
7. Precision of cutting paper: uniform speed: ±1mm non-uniform speed: ±2mm
8. Equipment size: Lmx5.0*Wmx2.0*Hmx2.0
Rollers size
1. Centre distance between up-knife and down-knife:  230mm.
2. Front down transfer roller:  156mm
3. Back down transfer roller:  156mm
4. Front up paper press roller:  150mm
Power motors and electrical parameters:
1. Main drive motor power: 37KW Full AC synchronous servo
2. Before and after feeding motor power: 3KW(Frequency Control)
3. Lubricating oil pump motor power: 0.18KW*2

Structural features:
1) Five sections using high-strength belt conveyor, Frequency loop control, Precision Auto Points, smooth delivery, rapid separation and delivered to the Ministry of basket gantry.
2) Sun gear press paper does not do damage to the cardboard. Carbon fiber press paper is extremely resistant.
3) Block car with the order structure, automatic adjustment, you can order the size of the fragmented, staggered stacking.
4) Ministry basket out feed nylon plastic caterpillar output, does not damage the backing paper.
5) Elevator servo control gondola lift, rational counterweight structure, optimal energy efficiency, After the basket out feed, Transfers power from the platform to the next step of the crawler.

Type MJDM-3-1800
The largest collection of paper width 1850mm
Collection of paper length Standard: 500 ~ 3500mm(Can be customized)
Logistics roller Can be configured according to the order
Lateral transport mode Modules belt
Stacking height 1700mm
Maximum production line speed 200m/min
Dimensions Length width height: 2000032002800mm
Total weight 12T
System parameters
Position machine Taiwan WEINVIEW or MCGS TONTEK Color touch screen10.4
Lower machine Performance of Taiwan DELTA Series PLC
Lift Control AC servo controller
Frequency machine Taiwan delta
Low-voltage electrical CHNT, Schneider Low-voltage electrical
Power Parameters
Conveyor roller drive RV reducer: 3kw5
Horizontal driving basket Gear reducer: 3KW2
Paper stop car drivers RV reducer: 0.75KW
Lifting drive Worm Reducer: 15KW
Total power About 30 KW

Technical Parameters:
Model RYSD-LC-1218 (400W) RYSD-LC-1218 (600W)
Processing size 1200x1800mm 1200x1800mm
Machine weight 1800kgs 1800kgs
Laser type China CO2 Sealed glass laser tube China CO2 Sealed glass laser tube
Laser power 400W Single head 600W Single head
Driving motor Yaskawa servo motor system Yaskawa servo motor system
Cutting depth 15- 30 mm plywood 15- 30 mm plywood
Cutting precision ±0.05MM ±0.05MM
USB port connection Yes Yes
Operating temperature 0-45°C 0-45°C
Blade thickness 0.45mm, 0.71mm,1.05mmetc. controllable 0.45mm, 0.71mm,1.05mmetc. controllable
Cutting speed Around 25-30 meters / hour, 18mm plywood Around 35-40 meters / hour, 18mm plywood
Protective gas Dry and oil-free air Dry and oil-free air
Power supply Three-phase 380v 50Hz/60Hz 30A (Standard) Three-phase 380v 50Hz/60Hz 30A (Standard)
Numerical control panel LCD screen, light-touched key-press LCD screen, light-touched key-press
Software supported CorelDraw, AutoCAD, Photoshop, CorelDraw, AutoCAD, Photoshop,
Graphic format support PLT DXF BMP JPG GIF PGN TIF PLT DXF BMP JPG GIF PGN TIF
EMS memory Attached 32 MB memory, can work under off-line condition Attached 32 MB memory, can work under off-line condition
Laser tube guarantee Guarantee 8 months, 10000 hours life span for laser tube in theory Guarantee 8 months, 10000 hours life span for laser tube in theory
Assistant equipment Air Dryer, industrial chiller, Exhaust Fan, Computer System Air Dryer, industrial chiller, Exhaust Fan, Computer System
Recommend spare parts America Lens, laser tube America Lens, laser tube
System memory function Power off memory cutting function Power off memory cutting function
H.S.Code 8456100090 8456100090

Introduction of the stacker:
The paper taking arm is manual operation. The paper stacking height can be chosen freely.
Adjustment is available for each belt.
The paper feeding platform transmitted up and down by chain.
The inclination of paper taking platform is changing as the height of the paper. Brake is installed to fix the platforms position.
When the paper stacking height reach the set point. the paper taking platform will hold the paperboard pneumatically.
Paper stacking height: 1600mm.
Max. Paperboard size: 2200*1650mm
The transmission belt driving motor: 2.2kw
Platform goes up and down driving motor: 2.2kw.
Paper taking arm cylinder: 80mm 300mm.
Machine Size: L 7650*W 2480*H 2600 mm

Detailed specification:

Stacker
Paper taking arm Belt type Pneumatic lift
adjustment Auto/Manual
Paper collection
speed Inverter Control Frequency
Regulation Individual adjustment
Paper collection lifting PLC control Frequency
Regulation Auto/Manual
Back paper
collection Manual position
adjustment

Main Technological Parameters:
-- The maximum working width: 1800 mm
-- Design speed: 120m/min.
-- Running speed: 100m/min.
-- Mechanical configuration: computer helical cutting knife
-- Length of cutting cardboard: 300-9999mm,
-- Precision of cutting cardboard: ±1mm.
-- The main drive motor power: 11KW (AC servo motor)
-- Paper motor and power: 3kw
-- Lubrication oil pump motor power: 0.37KW
-- Lose paper motor power: 1.5KW


Roller diameter later of parameters:
On the cutting knife shaft diameter: 188mm
Under the crosscut knife shaft diameter: 188mm
Under the knife shaft diameter tools and paper roller diameter: 156 mm
Note: all the roller both by grinding, the surface hard chromium plating in (on, under knife shaft except) manage.

Characteristics:
1. Automatically stack and collect the paperboard;
2. Vertical paperboard collecting use width belt for transportation;
3. Using 16 welded channel steel;
4. Adopts electric adjust cardboard size, pneumatic control the transversely output of paperboard, electrical output;
5. Number of cardboard sheets or height is controlled by a pedal switch;
6. Vertical cardboard stacker adopts wide flat conveyor belt.

Main features:
Items MJDM-4-1200
Design speed 100m/min
Economical Working Speed 80m/min
Working width 1200mm
Max. length of paperboard 2500 mm
Max. height of paperboard 200 mm
Gas: 0.4 - 0.9Mpa
Steam pressure 0.8 - 1.3Mpa

Items Description
Main transport motor 3.0KW 380V 50HZ
Transversely output motor 1.5KW 380V 50HZ
Running power 1.5KW 380V 50HZ

Introduction:

The gantry and stacker machine is the end part of the corrugated paperboard line. It is used for the stacking of the paperboards, and then transport out.

Characteristics
1. PLC control for output, automatically stack, automatically transport paperboards.
2. Long transport part is for helping to slow the high-speed running paperboard, to avoid the damage of the paperboard.
3. There is trundle equipment in transversely output part, between transporting paperboard equipment has baffle.
4. Use belt for transport, stably and orderly send out.
5. Baffle orientation automatically.
6. Automatically counting and control, automatically circulating stacking. The work can also be done by hand.
7. PLC control and digital display stacking. The numbers can be set as requirement. Operation is easy and fast.
8. Use frequency conversion motor control, synchronize with the production line.
9. There are several photoelectric switches, realize the function of automatically paperboard sending, counting, batching, stacking, output, and recycling work.

Maim Technological Parameters

Model MJDM-5-1600 MJDM-5-1800 MJDM-5-2000
Max. working width 1600mm 1800mm 2000mm
Min. working width 300mm 300mm 300mm
Max. Speed 150m/min 150m/min 150m/min
Working speed 120m/min 120m/min 120m/min
Max. Stack length 2300mm 2300mm 2300mm
Min. Stack length 300mm 300mm 300mm
Max. Stack height 1500mm 1500mm 1500mm
Pneumatic pressure 0.6ï½?0.9MPa 0.6ï½?0.9MPa 0.6ï½?0.9MPa
Power 9kw 11kw 13kw
Machine size (mm) 17600*2200*3500 17600*2400*3500 17600*2600*3500
Note: We can produce the machine size as customer's requirement.

Rollers size:
1. Centre distance between up-knife and down-knife: 230mm.
2. Front down transfer roller:  156mm
3. Back down transfer roller:  156mm
4. Front up paper press roller: 50mm

Power motors and electrical parameters:
1. Main drive motor power: 37KW Full AC synchronous servo
2. Before and after feeding motor power: 3KW(Frequency Control)
3. Lubricating oil pump motor power: 0.18KW*2

Mainly purchased parts, raw materials and origin:
Name of main parts Brands or place of origin Material and type
Full AC servo motor Italy Phase 37KW
Feeding frequency motor Hebei hengshui yongshun
bearing HRB,ZWZ,LYC Up and down the knife roller bearings from Japan NSK
belt Germany OPTIBELT
Up sleeve Xianyang chaoyue
Seat belt bearing Zhejiang wuhuan
Contactors and relays, relays of middle France Schneider
Proximity Switch Japan OMRON
Flying shear servo control system USA Emerson
Motion control board USA Emerson
Rotary encoder Wuxi Ruipu
Feeding drive Taiwan Delta
Human Machine Interface Taiwan WEINVIEW or MCGS
Sun gear China Shenzhen
Pneumatic components Zhejiang Sonor CSM

Introduction:
MJNC-2 series NC paperboard cutter is mainly used for the transversely cutting of the corrugated paperboard, single-face paperboard, industrial paperboard. It is connected to the high-speed 7-layer, 5-layer, 3-layer corrugated paperboard production line and single-facer line. It has high working speed and high cutting precision. The Computer control system use German servo control technology. The technology is advanced all over the world.

Characteristics:
1. Computer control intercourse servo controller drives the motor working, has high cutting precision.
2. Have following special functions: Order can be real-time input, the computer can save many different orders, edit, modify, save, real-time monitor (parameters of speed, cut length, rest length, production process and so on.), automatically change order (change in order, change by force), output, alarm for the rest order and so on.
3. Instantaneously control cutting length and numbers, can modify, add or cancel at any moment.
4. The transmission gears are dealt with grinding, spray lubrication.
5. High-quality alloy spiral knife, exactly gears driving, cutting is stable and smooth.
6. Intercourse servo cutting control, high precision, high efficiency and high credibility.
7. Frequency conversion control the transportation of input & output paperboard, synchronize with the production line.
8. Certain length, color-mark tracing the cutting, automatically change order.
9. Colorful touch-screen for easy operation, control and monitor.
10. Run in-phase with the paperboard production line.

Specifications:
Model MJNC-2-1400 MJNC-2-1800 MJNC-2-2200
Width 1400mm 1800mm 2200mm
Cutting length 50 - 9999mm 50 - 9999mm 50 - 9999mm
Order keeping 999orders 999orders 999orders
Cutting precision ±1mm ±1mm ±1mm
Max.design speed 150m/min 150m/min 150m/min
Economic production speed 120m/min 120m/min 120m/min

Characteristics:
Fast Printing: The new design with 4 or 8 printing heads realized the continuous production by 1Pass, the speed is high.
Automatic feeding: Optimization of control action program, continuous delivery of paper without waiting, printing process is smooth and fast.
No Printing plate: With computer drawings, 0 cost for plate.
No plate adjust: Control fast change by computer program, no print paperboard waste.
No color adjust: Professional software processing, four color automatic color stack printing.
No need clean work: Full closed automatic ink supply system and zero discharge of wastewater in the process of spray printing.
Controllable ink dot: use an automatic control system to control jet ink , to achieve more realistic gradient color.
Energy saving and consumption reduction: low cost, low energy consumption, no noise production. The cost is about USD0.005 per square meter, the cost of full plate color printing ink is about USD0.05 per square meter, and the power consumption of the whole machine is not more than 3 kilowatts.
Simple operation: Computer program control, automatic height measurement, paper delivery, low manpower cost.
Bit working area: flat sheet feed, spray printing, maximum paper for 2500mmX5000mm or longer.
Min. order is one piece print: the start and print, the real solution to the sample, the supplement, the emergency list and the small volume carton orders.
Fast change: a lot of orders can be choreographed at a time to achieve zero time change.
Network control: convenient enterprise to production statistics and supervision and manufacturer remote technical support.

Introduction:
This machine is used for both full and spot varnishing on light and thick paper with accurate and even spot coating by blanket or flexo plate. Many safeguards and human-based operating procedures ensure user safety and convenience. Imported elements for main bearings and electrical components are adopted in the machine.

Main Technical Parameters:
Model: RYJ-UV1100
Max sheet size 800--1100mm
Min sheet size 307-400mm
Max coating size 760-1060mm
Paper weight 80-450g/m
Max speed UV coating 5000sheets/hour
Total electric consumption 45kw
UV lamp NO. power 3-9.75kw
IR lamp optional NO. power 15-1.5kw
weight 8.4T
Overall Dimensions 7600x2600x1950mm
Note: the speed is based on the paper size and paper weight

Maim Technological Parameters

Model
Items MJBZB-1-1300 MJBZB-1-1450 MJBZB-1-1600
Max. Paper Size (W*L) 1300 *1300 mm 1450 *1450 mm 1400*1600mm
Min. Paper Size (W*L) 300 * 350 mm 300 * 350 mm 300 * 350 mm
Speed 95 m/min. 95 m/min. 95 m/min.
Total Power 6.9 kw 8.7 kw 10.5 kw
Total Weight 3800 kg 4000 kg 4500 kg

Main Parameters:
Model Max. Size Min. Size Precision Speed Motor Power
MJRY-3-930 880X670mm 470X340mm 0.75 25/min 4.0kw
MJRY-3-1100 1050X800mm 550X410mm 0.75 23/min 5.5kw
MJRY-3-1200 1150X830mm 600X420mm 0.75 23/min 5.5kw
MJRY-3-1300 1250X920mm 650X470mm 0.75 18/min 5.5kw
MJRY-3-1400 1350X1000mm 700X510mm 0.75 18/min 7.5kw
MJRY-3-1500 1450X1050mm 750X530mm 0.75 18/min 7.5kw
Mark: Machine speed : 18-20 pcs/min (Equal 1080-1200 pcs/min )

Equipments List
Equipments Name MJF-80-1800
Economic MJF-120-1800
Middle-speed MJF-180-1800
High-speed
Mechanical Roll Stand 5
Hydraulic Roll Stand 5 5
Pre-heater �¤600mm 4
Pre-heater�¤900mm 4
Pre-heater�¤1000mm 4
Vacuum Single Facer (Roll�¤280) 2
Vacuum Single Facer (Roll�¤320) 2
Vacuum Single Facer (Roll�¤360) 2
Transport Bridge 1
Heavy model transport bridge 1 1
Triple preheater �¤600mm 1
Triple preheater �¤900mm 1
Triple preheater �¤1000mm 1
Double Gluer - B 1
Heavy model double gluer - C 1 1
Double baker (600mm X14heat plates) 1
Double baker (600mm X15heat plates) 1
Double baker (600mm X18heat plates) 1
High-Speed Thin Blade 1 1
NC Thin Blade (Computer control) 1
NC Cutter 1 1 1
Paperboard Conveyor & Stacker 1 1 1
Glue System 1 1 1
Steam System 1 1 1

Main Technical Parameters
Technological Parameters MJT-80-1800
Economical model MJT-120-1800
Standard model MJT-150-1800
High-Speed
Steam cost 0.8~1.2Mpa
About 2T/h 0.8~1.2Mpa
About 2T/h 0.8~1.2Mpa
About 2T/h
Starch Cost (g/m2)
11-13
11-13
11-13
Raw paper width (mm)
1800
1800
1800
Mechanical Speed
100m/min
150m/min
180m/min
Economical speed
80m/min
120m/min
150m/min
Workers
6-9
6-9
6-9
Note: Above parameters are for your reference. It depends on the different machines you choose.

1. MJBZJ Series Automatic Flute Laminator adopts chain pusher and back registration system together with spring blade side lay and vacuum sucking conveying system makes this series of machine fit for a larger range of paper, high precision while remaining the features of easy operation and maintenance.
2. The core designed rubber roller together with knurled steel roller enhances the evenness of gluing, strength of stickiness, as well as lowering the production cost.
3. Balance-tested rollers, tight assembling technique, plus timing and tooth belt driving mechanic system makes the machine runs at low noise with high precision.
4. The machine adopts automatic glue supply and recyclable glue circulating system
5. Self-developed high-strength feeder compliant with high configuration electric system makes the machine run at low malfunction and stable. The electric parts used are all world wide available brand or well-known Chinese brand.
6. All material are inspected according to ISO-9001 standard and the key parts such as the harmonic gear and bearings are imported ones.
7. The bottom sheet for this machine can be A,B,C,E,F flute corrugated sheet as well as cardboard not less than 250gsm. It can do 3 or 5 ply board to sheet lamination or board to board lamination. The range for top paper can be 200-800 GSM or 3 ply laminated board with top paper advance or alignment function.
8. Less vibration and low noise.
9. CE certificate available.
10. Gluing even: 25-35gsm. Quite cost effective for your production.
11. Side lay registration is installed on the machine.

Introduction:
This machine is used for slitting and rewinding various large rolling material in thickness 40g/m2-300g/m2, such as paper, paper sticker, film, pvc, opp, bopp, PET, Aluminum foil et

Main Parameters:
Model RYFQ-1300C
Max width of unwinding 1300mm
Max diameter of unwinding �¦1400
Min. width of slitting 30mm
Max. diameter of rewinding �¦600mm
Max Speed 350m/min
Total power 22KW
Power supply 380v.50hz
Weight 4500kg
Overall dimension (LXWXH) 2700X2800X2000mm

Performance and Characteristics:
1. PLC control, frequency converter driving system
2. Three servo motor control
3. 3 airshaft pneumatic loading system, Paper core positioning by laser
4. Automatic error position control with sensor
5. Automatic tension control
6. Razor blade cutting and groove roller cutting, circle blade slit for paper
7. Configure the main and the auxiliary touch roller
8. Friction air shaft rewinding 3
9. Rewinding roll discharge collecting device
Unwinding airshaft pneumatic automatic loading system )

Introduction:
This slitting machine is used for slitting and rewinding various large rolling materials such as paper,(20g/m2-300g/m2) cellophane paper, bill paper, double-face adhesive tape, PVC, weave material, non-woven of cloth, etc. It adopts photoelectric automatic error correction adjustment system for unwinding, anomalistic materials will be easy slit. Equipped with automatic waste film blowing device. Manual material loading for unwinding with taper cover style pneumatic shaft.

Main Parameters:
Model RYFQ-900B RYFQ-1100B RYFQ-1300B
Max. width of unwinding 900mm 1100mm 1300mm
Max. diameter of unwinding 600mm 600mm 600mm
Width of slitting 20-900mm 20-1100mm 20-1300mm
Max. diameter of rewinding 400mm 400mm 400mm
Speed 5-150m/min 5-150m/min 5-150m/min
Deviation-rectifying Error ±0.5mm ±0.5mm ±0.5mm
Total power 3kw 3kw 3kw
Weight (approx. ) 1500kg 1800kg 2100kg
Overall dimension(LxWxH) 1100x1600x1400 (mm) 1100x1800x1400 (mm) 1100x2000x1400(mm)

Specification:
Model RYFQ-1800A
Suitable working materials Paper sticker, paper, compound printing paper and so on
Material thickness 40-600gsm (paper)
Max. Diameter of mother roll 1600mm
Max width of mother roller 1800mm
Paper roll core size 3 or 6
Slitting width 30-1800mm
Max. Diameter after rewinding 1300mm
Precision of web-guiding ±0.15mm
Slitting speed 350m/min
Power 32kw
Machine weight 7200kg
Machine size 3800*3400*2000mm
Slitting knife 10sets (can be required by customer)
Rewinding shaft 2units
Hydraulic roll stand 1unit

Main Parameters:
Model Paper slitting machine RYFQ-1600
Technical parameter Control system
Max width mother roll 1600mm PLC Controller Delta(Taiwan)
Min-width finish roll 35mm Main-machine interface WEINVIEW6070i
Max-diameter mother roll 1500mm Tension sensor Hz100kg
Max-diameter finish roll 1300mm Actuator CHNT
Speed of Slitting 0-300m/min Signal component Omron
Slitting capability 60-700gsm Pneumatic component Airtac
winding way Air expansion winding Program edition RYS-RS2.0
Slitting knife Could up to 18sets Inverter YASKAWA 15KW
Paper giving way By hydraulic clamping Length sensor Have
speed regulation control Inverter outfit assemble
Power input According to customer require Loading material Hydraulic clamping type
Size (mm) L*W*H Unloading material Pneumatic
Unwinding machine 3600 *1600 *1200mm Edge correcting motor Y11 60:1
Rewinding machine (B)3000*1600*1200mm
(C)2450*1200*800mm Count meter Automatic
Up-knife specification 2*110*75mm Tension adjust magnetic powder brake
Down-knife specification 4*110*75mm rewind double airshaft
Total weight 5050kg Slitting by clipper,
Drive system Magnetic powder tension control system
Mainframe power 15KW Enclosed component
Mainframe wheeling speed 1400r/min Air compressor no
Liquid compression motor 1.5kw Useful tool have
Way of correcting edge Hydraulic
Driving way Chain driving
Bearing Wanxiang

Technical Parameters:
Model RYFQ-900 RYFQ-1100
Material thickness: 0.012-0.5mm film 30-350g paper
Max. Diameter of Raw material: 800mm
(can choose the separated stand, which max. Can put 1400mm)
Paper core: 3#
Max. Effective width of raw material: 800mm 1100mm
Min. Width of Rewinding: 10mm(paper), 5mm(film)
Width of Slitting: 20-800mm
Max. Diameter of rewinding: 500mm
Error-correction length: 150mm
Precision: �±0.15mm
Max. Speed: 350m/min
Slitting speed: 10---350m/min
Total power: 12.5KW
Total weight: 3000KG
Dimension: 2800mm*3400mm*1400mm 3000mm*3400mm*1400mm
Slitting tools: 20sets Standrad (can inform the width you want to make, so that we can set the knife basic before send to you)
Upper slitter dimension:
105*75*1.2mm
Brand: shanghai shenlong
Bottom round cutters dimension:
80*20*16mm
Brand: shanghai shenlong
Rewinding shaft 4pcs of air shaft
Diameter of aluminum roller 100mm

Main Parameters:
Model RYFQ-1100C RYFQ-1300C RYFQ-1600C
Max. width of unwinding 1100mm 1300mm 1600mm
Max. diameter of unwinding 700mm 700mm 700mm
Min. width of slitting 20mm 20mm 20mm
Max. diameter of rewinding 600mm 600mm 600mm
Speed 10-160m/min 10-160m/min 10-160m/min
Precision ±0.2mm ±0.2mm ±0.2mm
Total power 7kw 7.8kw 8.5kw
Suitable power supply 380v/50hz 380v/50hz 380v/50hz
Weight (approx.) 2100kg 2300kg 2600kg
Overall dimension
(L W H )(mm) 2850 2200 1350 2850 2350 1350 2850 2650 1350

Introduction:
This slitter is used for slitting and rewinding various large rolling materials such as paper,(20g/-300g/)cellophane paper, bill paper, double-face adhesive tape, PVC, weave material, non-woven of cloth, etc. Adopt A and B pneumatic shaft structure for rewinding. It adopts photoelectric automatic error correction adjustment system for unwinding, auto materials will be easy slit. Equipped with automatic waste film blowing device. Manual material loading for unwinding with taper cover style pneumatic shaft.

Main Parameters:
Model RYFQ- 1100C RYFQ- 1300C RYFQ- 1600C
Max. width of unwinding 1100mm 1300mm 1600mm
Max. diameter of unwinding 1400mm 1400mm 1400mm
Min. width of slitting 20mm 20mm 20mm
Max. diameter of rewinding 500mm 500mm 500mm
Speed 10-120m/min 10-120m/min 10-120m/min
Precision of slitting ±0.2mm ±0.2mm ±0.2mm
Total Power 7kw 7kw 8.5kw
Suitable power supply 380V/50Hz 380V/50Hz 380V/50Hz
Weight( approx..) 2100kg 2300kg 2600kg
Overall dimension(LxWxH) mm 2850x2150x1350 2850x2350x1350 2850x2650x1350

Main Technological Parameters:
Model RYE7-3Ms/3 M
Driving mode Mechanical /Electrical and Pneumatic
Box type PLAFORM, P84, CITRUS, OPEN CLOUMNS&C-1
Max. speed 1800/1800-2400 boxes/hour, can adjust speed
Power 6.2kw
Voltage 380V 50HZ 3 phases + N + G
Weight 1280 KG
Air consumption 6-8 Bar (19L cycle)
Dimension 3880x1470x2080mm
Glue system Nordson / Robatech / MELER

Technical parameters:
Thickness of cardboard Min 1.5mm
Max 3mm
Power 380V/50Hz
Noise â?¤80dB
Speed/h 2000-2800
Cardboard stacking height 200mm
Stacked weight/kg 20
Total power 12kw
Glue capacity 8L
Air source(Litre/min) 50L/Minute
Machine weight 2200kg
Dimensions(LxWxH) 4100X2000X2450mm

THE TECHNICAL PARAMETER:
Thickness of cardboard Min. Size 1.5mm
Max. Size 3mm
Power 380V/50Hz
Noise 80dB
Speed 700-1000unit/hour
Cardboard stacking height 750mm
Stacked weight 150kg
Total power About 5kw
Glue capacity 12L
Air source 50 L/min
Machine weight 1000kg
Dimensions 2400X1400X2100mm

PACKAGING BOXES SPECIFICATIONG:
Package Size

A=Width B=Length A Min. size 580mm
A Max. size 950mm
B Min. Size 475mm
B Max. size 680mm
Carton size

Length=L
Width=W
Hight=H
Hight=K L Min. Size 265mm
L Max. size 380mm
W Min. Size 185mm
W Max. size 280mm
H Min. Size 80mm
H Max. size 120mm
K Min. Size 30mm
K Max. size 120mm
Inside edge size R R Min. Size 20mm
R Max. size 40mm

FEATURES:
1. The use of Thermal sol spraying system;
2. Cardboard automatic feed, feed coherent operation, edging, folding side and folded into the molding action once completed;
3. Adopt moving controller, photoelectric tracking system, gas supply inspect system, touch screen interface, achieve full automatic cover in joined box forming process;
4. Infrared security system to ensure safe operation personnel
5. Automatic fault diagnosis function;
6. Automatic quick die adjustment device;
7. The replacement module adopts CNC system which speed is fast and with memory function.
8. Rack cage design, the overall processing, packet type combination;
9. Automatic cover box function;
10. Circulation switch function.

THE TECHNICAL PARAMETER:
Thickness of cardboard Min. size 1.5mm
Max. Size 3mm
Power 380V/50Hz
Noise 80dB
Speed 2100-2600unit/hour
Cardboard stacking height 800mm
Stacked weight About 150kg
Total power About 10kw
Glue capacity 10L/hot melt glue
Air source 400 Litre/min
Machine weight 2500kg
Dimensions 4150X2550X2800mm

PACKAGING BOXES SPECIFICATIONG:
Package Size
A=Width
B=Length A Min. size 345mm
A Max. size 710mm
B Min. Size 470mm
B Max. size 945mm
Carton size
Length=L
Width =W
Hight =H
Hight = K L Min. Size 165mm
L Max. size 380mm
W Min. Size 100mm
W Max. size 280mm
H Min. Size 70mm
H Max. size 125mm
K Min. Size 30mm
K Max. size 125mm
Inside edge size R R Min. Size 20mm
R Max. size 40mm

Introduction:
RYHW02Y Slitting & Rewinding machine is specially used for many different kind paper and paperboard, arround 50-550g/m2. It is used for slitting and rewinding the big width rollers to small width rollers. It is widely used for the paper &paperboard production factory, carton production factory and so on.

Main Parameters:
Paper: 50-600g/m2
Effect working Width: 2200mm
Design speed: 400m/min.
Paper leading model: Down-side leading.
Working speed: 300m/min.
Max. diameter of Raw paper roll: 2000mm
Max. Diameter of Finished paper roll: 1500mm

Main Parameters:
Material type: white board paper, carbon-free paper, coated paper, two-side offset paper, etc.
Material thickness: 30-510g paper
Max. Diameter of raw material: 1800mm
Raw material paper core: 3#, 6#
Max. Width of raw Material: 1800mm
Min. Width of Raw Material 400mm
Roller surface width: 1850mm
Width of slitting: 40-1800mm
Rewinding paper core: 3#
Max diameter of rewinding: 1500mm
Error-correction length: 150mm
Precision: ±0.15mm
Max. Speed: 400m/min
Slitting speed: 10-400m/min
Total power: 52KW
Total weight: 18000kg
Dimension: 7500mmx4200mmx2300mm
Slitting tools: 10 sets for standard, also can do according to customer's requirement.
Upper slitter dimension: 160*100*50mm Brand: shanghai shenlong
Bottom round cutters dimension: 150*120*40mm Brand: shanghai shenlong
Rewinding shaft with 2pcs of 3# air shaft, recycle using.
This equipment is with 13pcs if 120 aluminum roller, 1pcs of rubber roller and 1pcs of steel roller.
With 2pcs of round cutter shaft

Introduction:
This slitting rewinding machine is suitable for slitting small rolling materials such as paper, aluminum foil, PVC, plastic film, insulation material, etc.it is equipped with frequency converter timing device, constant tension magnetic power control system for unwinding, photoelectric auto error-correction, two pieces magnetic powder clutches, main machine for controlling the center rewinding can be touched with surface, double shafts rewinding interlaced without meeting.

Main Parameters:
Model RYFQ-700D RYFQ-900D RYFQ-1100D
Max. Width of unwinding 700mm 700mm 700mm
Max. Diameter of unwinding 700mm 900mm 1100mm
Max. Diameter of rewinding 400mm 400mm 400mm
Min. Width of slitting 5mm 5mm 5mm
Total power 4kw 5.2kw 5.8kw
Weight (approx.) 1200kg 1400kg 1600kg
Overall dimension (LxWxH ) mm 2100x1300x1500 2100x1500x1500 2100x1700x1500

Introduction:
ROYAL PACKING is professional producer for Corrugated cardboard production line in China. We can produce the 3 ply, 5 ply and 7 ply corrugated cardboard production line, Widths from 1000 to 2500mm, production speeds from 60 to 250 meters/min. We can offer reasonable project to meet customers requirements.

More Details:
Main Equipment List
Equipment Name MJT-80-1800
Economical MJT-120-1800
Standard MJT-150-1800
High-speed
Mechanical Roll Stand (include the paper roll rail.) 3
Hydraulic Roll Stand (include the paper roll rail.) 3 3
Pre-heater 600mm 1
Pre-heater 800mm (Ground) 2 2
Vacuum Single Facer (Roll280), gimbal drive 1
Vacuum Single Facer (Roll320), gimbal drive 1 1
Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1
Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1 1
Double preheater 600mm 1
Double preheater 800mm 1 1
Double Gluer - A 1
Double Gluer - B 1 1
Double baker (600mm X12heat plates, 4.5meter cooling part.) 1
Double baker (600mm X14heat plates, 5meter cooling part.) 1
Double baker (600mm X16heat plates, 6meter cooling part.) 1
Thin Blade (Simple electrical adjust.) 1
NC Thin Blade 1 1
NC Cutter 1 1 1
Conveyor and Stacker 1 1 1
Glue system 1 1 1
Steam system 1 1 1

Introduction:
ROYAL PACKING is professional producer for Corrugated cardboard production line in China. We can produce the 3 ply, 5 ply and 7 ply corrugated cardboard production line, Widths from 1000 to 2500mm, production speeds from 60 to 250 meters/min. We can offer reasonable project to meet customers requirements.

More Details:
Main Equipment List
Equipments Name MJT-80-1800
Economical MJT-120-1800
Standard MJT-150-1800
High-speed
Mechanical Roll Stand (include the paper roll rail.) 3
Hydraulic Roll Stand (include the paper roll rail.) 3 3
Pre-heater 600mm 1
Pre-heater 800mm (Ground) 2 2
Vacuum Single Facer (Roll280), gimbal drive 1
Vacuum Single Facer (Roll320), gimbal drive 1 1
Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1
Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1 1
Double preheater 600mm 1
Double preheater 800mm 1 1
Double Gluer - A 1
Double Gluer - B 1 1
Double baker (600mm X12heat plates, 4.5meter cooling part.) 1
Double baker (600mm X14heat plates, 5meter cooling part.) 1
Double baker (600mm X16heat plates, 6meter cooling part.) 1
Thin Blade (Simple electrical adjust.) 1
NC Thin Blade 1 1
NC Cutter 1 1 1
Conveyor and Stacker 1 1 1
Glue system 1 1 1
Steam system 1 1 1

Introduction:
ROYAL PACKING is professional producer for Corrugated cardboard production line in China. We can produce the 3 ply, 5 ply and 7 ply corrugated cardboard production line, Widths from 1000 to 2500mm, production speeds from 60 to 250 meters/min. We can offer reasonable project to meet customers requirements.

More Details:
Main Equipment List
Equipment Name MJT-80-1800
Economical MJT-120-1800
Standard MJT-150-1800
High-speed
Mechanical Roll Stand (include the paper roll rail.) 3
Hydraulic Roll Stand (include the paper roll rail.) 3 3
Pre-heater �¤600mm 1
Pre-heater �¤800mm (Ground) 2 2
Vacuum Single Facer (Roll�¤280), gimbal drive 1
Vacuum Single Facer (Roll�¤320), gimbal drive 1 1
Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1
Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1 1
Double preheater �¤600mm 1
Double preheater �¤800mm 1 1
Double Gluer - A 1
Double Gluer - B 1 1
Double baker (600mm X12heat plates, 4.5meter cooling part.) 1
Double baker (600mm X14heat plates, 5meter cooling part.) 1
Double baker (600mm X16heat plates, 6meter cooling part.) 1
Thin Blade (Simple electrical adjust.) 1
NC Thin Blade 1 1
NC Cutter 1 1 1
Conveyor and Stacker 1 1 1
Glue system 1 1 1
Steam system 1 1 1

Introduction:
ROYAL PACKING is professional producer for Corrugated cardboard production line in China. We can produce the 3 ply, 5 ply and 7 ply corrugated cardboard production line, Widths from 1000 to 2500mm, production speeds from 60 to 250 meters/min. We can offer reasonable project to meet customers requirements.

More Details:
Main Equipment List
Equipments Name MJT-80-1800
Economical MJT-120-1800
Standard MJT-150-1800
High-speed
Mechanical Roll Stand (include the paper roll rail.) 3
Hydraulic Roll Stand (include the paper roll rail.) 3 3
Pre-heater 600mm 1
Pre-heater 800mm (Ground) 2 2
Vacuum Single Facer (Roll280), gimbal drive 1
Vacuum Single Facer (Roll320), gimbal drive 1 1
Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1
Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1 1
Double preheater 600mm 1
Double preheater 800mm 1 1
Double Gluer - A 1
Double Gluer - B 1 1
Double baker (600mm X12heat plates, 4.5meter cooling part.) 1
Double baker (600mm X14heat plates, 5meter cooling part.) 1
Double baker (600mm X16heat plates, 6meter cooling part.) 1
Thin Blade (Simple electrical adjust.) 1
NC Thin Blade 1 1
NC Cutter 1 1 1
Conveyor and Stacker 1 1 1
Glue system 1 1 1
Steam system 1 1 1

Introduction:
ROYAL PACKING is professional producer for Corrugated cardboard production line in China. We can produce the 3 ply, 5 ply and 7 ply corrugated cardboard production line, Widths from 1000 to 2500mm, production speeds from 60 to 250 meters/min. We can offer reasonable project to meet customers requirements.

More Details:
Main Equipment List
Equipment Name MJT-80-1800
Economical MJT-120-1800
Standard MJT-150-1800
High-speed
Mechanical Roll Stand (include the paper roll rail.) 3
Hydraulic Roll Stand (include the paper roll rail.) 3 3
Pre-heater 600mm 1
Pre-heater 800mm (Ground) 2 2
Vacuum Single Facer (Roll280), gimbal drive 1
Vacuum Single Facer (Roll320), gimbal drive 1 1
Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1
Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1 1
Double preheater 600mm 1
Double preheater 800mm 1 1
Double Gluer - A 1
Double Gluer - B 1 1
Double baker (600mm X12heat plates, 4.5meter cooling part.) 1
Double baker (600mm X14heat plates, 5meter cooling part.) 1
Double baker (600mm X16heat plates, 6meter cooling part.) 1
Thin Blade (Simple electrical adjust.) 1
NC Thin Blade 1 1
NC Cutter 1 1 1
Conveyor and Stacker 1 1 1
Glue system 1 1 1
Steam system 1 1 1

ROYAL PACKING is professional producer for Corrugated paperboard production machines, the main products include: 2-layer, 3-layer, 5-layer, 7-layer Corrugated paperboard production line, single facer line, single facer, Roll stand, Auto Splicer Pre-heater, Gluer machine, triple preheater, double facer, NC Cutter, Slitter Scorer, stacker, gantry stacker, basket stacker and so on.

Introduction:
JQZ type Paper Shred Fan is mainly used for corrugated paperboard waste transportation system. It has the function of cutting waste paper and providing transport dynamic, it can shred the scrap edge of cardboard into pieces directly, conveying the waste paper scrapper to the waste paper packing room through the pipeline; Paper shred fan is usually equiped with a muffuler, so as to reduce noise and reduce dust.

Technological Parameter:
Model Power (kw) Rotation speed (r/min) Flow (m3/h) Pressure (Pa)
JQZ-4A 3 2900 821 ~ 2487 2669 ~ 1467
JQZ-4.5A 5.5 2900 1169 ~ 3542 3378 ~ 1856
JQZ-5A 11 2900 1604 ~ 4858 4170 ~ 2291
JQZ-6.8C 15 2130 4477 ~ 7202 4204 ~ 3514
JQZ-6.8C 18.5 2130 7942 ~ 8675 3258 ~ 2997

Technical Parameters:
Model RYSD-830A
Blade thickness(mm) 0.71 - 1.05
Blade height(mm) 8 - 32
Max. bending angle 100°
Min. ARC radius of 90 degree 0.4
Front Min. bending size 1.0
Back Min. cutting size 1.0
Feeding precision ±0.03
Bending flatness ±0.2
Functions Automatic Bending, Straight cut, Muti-bridging, Lipping cut.
Optional function Perforating, for 2pt/3pt cutting rules fix height 23.8mm, tools sizes or perforating sizes1mm width (Adjustable by software), 2mm depth fixed.
Hole punching, diameter is 5.5mm (standard), cutting rules downside to centre of hole height is from 9 to 14mm (Adjustable).
Bridge width Over 5.5 mm any sizes available.
Bridge height 15mm & 18mm
Cutting methods Swing cutting or Auto flat cutting
Optimal pattern format DXF format (Auto CAD,Core Draw)
Air supply 0.6mpa
Power supply Three-phase power 380V 50/60HZ (Standard)
Machine total power Around 1.3 to 1.5 kw
Gross weight. Around 500kgs
Overall dimension 2650-1050-1350mm(L-W-H)
Recommend spare parts One set bridge tools, One set cutting tools
H.S. Code 8462219000

Technical Parameters:
Model RYSD-LC-1218 (400W) RYSD-LC-1218 (600W)
Processing size 1200x1800mm 1200x1800mm
Machine weight 1800kgs 1800kgs
Laser type China CO2 Sealed glass laser tube China CO2 Sealed glass laser tube
Laser power 400W Single head 600W Single head
Driving motor Yaskawa servo motor system Yaskawa servo motor system
Cutting depth 15- 30 mm plywood 15- 30 mm plywood
Cutting precision ±0.05MM ±0.05MM
USB port connection Yes Yes
Operating temperature 0-45 °C 0-45 °C
Blade thickness 0.45mm, 0.71mm,1.05mm etc. controllable 0.45mm, 0.71mm,1.05mm etc. controllable
Cutting speed Around 25-30 meters / hour, 18mm plywood Around 35-40 meters / hour, 18mm plywood
Protective gas Dry and oil-free air Dry and oil-free air
Power supply Three-phase 380v 50Hz/60Hz 30A (Standard) Three-phase 380v 50Hz/60Hz 30A (Standard)
Numerical control panel LCD screen, light-touched key-press LCD screen, light-touched key-press
Software supported CorelDraw, AutoCAD, Photoshop, CorelDraw, AutoCAD, Photoshop,
Graphic format support PLT DXF BMP JPG GIF PGN TIF PLT DXF BMP JPG GIF PGN TIF
EMS memory Attached 32 MB memory, can work under off-line condition Attached 32 MB memory, can work under off-line condition
Laser tube guarantee Guarantee 8 months, 10000 hours life span for laser tube in theory Guarantee 8 months, 10000 hours life span for laser tube in theory
Assistant equipments Air Dryer, industrial chiller, Exhaust Fan, Computer System Air Dryer, industrial chiller, Exhaust Fan, Computer System
Recommend spare parts America Lens, laser tube America Lens, laser tube
System memory function Power off memory cutting function Power off memory cutting function
H.S.Code 8456100090 8456100090

I-1. Main Parameters
Model MJKC-2200 MJKC-1800
Max machine speed 80 ~ 150 pieces/min 80 ~ 150 pieces/min
Max feeding size (L * W) 2200*880mm 1800mmX600mm
Min feeding size (L * W) 600*230mm 450mmX170mm
Min slotting interval Negative knife (A * B) 175mmX60mm 150mmX50mm
Positive knife (A * B) 90mm*90mm 80mmX80mm
Min height of box (H) 115mm 70mm
Machine size 4.7*4.5*2m 2.8*2.5*2.0m

II. Introduction
This machine adopts the vacuum adsorption auxiliary leading edge feeding system feeding mode. Automatic feeder.
It has the function of slotting, chamfering, dividing edge and rolling line of corrugated board at one time. The machine and slotting depth are all electrically adjusted, and the scale reading is attached. The slotted phase adjustment mechanism is a planetary gear structure, which adopts an electric computer-type 360-degree adjustment, and the upper and lower slotted cutter heads and the pressure roller are synchronously moved left and right. (Note: special tools adjust the left and right movement), which is convenient to use and maintain, small and exquisite, It is a professional equipment for slotting and forming small cartons.
1. The slotting blade head is made of all-steel parts. The slotted cutter adopts a sawtooth curved semicircular cutter to cut the chip and remove the chip. After the slotting is completed, the cardboard enters the paper separation shaft, and the paper separator cuts the two sides of the carton neatly. (Note: The pressure roller and the paper cutter are installed on the same axis for easy adjustment.)
2. After the cardboard slotting, chamfering, pressing line and dividing edge are completed, it is exported by the six conveying shafts of the paper exiting part of the equipment,
3. This machine is equipped with a frequency converter (can be adjusted freely and slowly).

Introduction of the stacker:
The paper taking arm is manual operation. The paper stacking height can be chosen freely.
Adjustment is available for each belt.
The paper feeding platform transmitted up and down by chain.
The inclination of paper taking platform is changing as the height of the paper. Brake is installed to fix the platformâ??s position.
When the paper stacking height reach the set point. the paper taking platform will hold the paperboard pneumatically.
Paper stacking height: 1600mm.
Max. Paperboard size: 2200*1650mm
The transmission belt driving motor: 2.2kw
Platform goes up and down driving motor: 2.2kw.
Paper taking arm cylinder: 80mmÃ??300mm.
Machine Size: L 7650*W 2480*H 2600 mm

Detailed specification:

Stacker
Paper taking arm Belt type Pneumatic lift
adjustment Auto/Manual
Paper collection
speed Inverter Control Frequency
Regulation Individual adjustment
Paper collection lifting PLC control Frequency
Regulation Auto/Manual
Back paper
collection Manual position
adjustment

Introduction:
MJRS-3 Electrical Roll stand is used in the simple single facer line, for load the paper roll, and rolling paper. It has advantage of good design, beautiful appearance, work stable, and have long life for use.

Technological Parameters:
Model Max. width Min. width Max. diameter Max. Load
MJRS-3-1200 1200 mm 600 mm 1500 mm 2.5t
MJRS-3-1400 1400 mm 600 mm 1500 mm 3.0t
MJRS-3-1600 1600 mm 600 mm 1500 mm 3.0t
MJRS-3-1800 1800 mm 600 mm 1500 mm 3.0t
MJRS-3-2000 2000 mm 600 mm 1500 mm 3.0t
MJRS-3-2200 2200 mm 600 mm 1500 mm 3.0t

HS CODE: 844180900

Introduction:
The Paper roll Band Saw Cutting machine is specially used for cutting paper roll, it can used to cut many sizes as your requirement. Speed is high and good result.
The new design has increase the dust suction hood, small dust, cutting is more smooth, better effect, stable performance, smooth surface, high degree of automation, safe operation, the machine can be customized according to customer demand, customer service and good quality service.

Technological Parameters:
Item RYSD-1500A
Max. width 2800mm
Min. Work Diameter 300mm
Max. Work Diameter 1500mm
Main Motor 22KW
Cutting speed 10-15minutes/roll
Voltage 380V/50HZ (can be design according to customer)
Total Power 35KW
Weight 9.0T
Dimension 5000*6000*2600mm

Configuration:
Item Qty. Brand
1. Control System
High-performance heavy-duty Inverter 4units Quality same as ABB
Electric Frequency Conversion Control System 1set High Stability, Independent design
2. Dimension positioning system
Dimensional Inverter motor 1unit 1.1KW, TAILI Brand
Paper holder 2sets Independent design with lifting function
3. Machine system
Gearbox Drive 1set Independent design
Gearbox Bearing 4 sets Japan NSK self-aligning bearing, Japan
High temperature resistant sealing ring 2units Japan NOK Brand
P bearing Japan NSK 4sets LK Brand
4. Cutting System
Paper Holder roller 1set 2.8m length, 194mm diameter, 25mm thickness
Main Motor 1unit 22KW, quality same as ABB
Paper holder Frequency Motor 1unit 1.5KW, Made in Taiwan
Alloy Band Saw Blade 4pcs Good stability, durability without deformation and swing, high safety.
New Design Dust-free vacuum hood 1set Independent design
Accessories Spare parts 3pcs Band Saw Blade
2units Professional dust bag
1set Allen wrench
8units Buttons/switch
1set Screwdriver
2units Vacuum tubes
1unit Operate Manual

Specification:
Model RYC-1400/1700/1900A
Model of cutting paper The upper knife cut reciprocally and the down knife is fixed
Thickness of cutting paper 60-550GSM
(per thickness of per paper are need >60GSM;
Total thickness of five roll are need

Introduction:
Window Patching Machines are widely used for sticking films on the windows of various color window boxes, color boxes and paper boxes, e.g medicine box, shirt box, etc.
RYKT-C is the Innovation Machine of Window Patching Machine, Manufactured & Designed by our own Technical Team.

Technical Parameters:
Model RYKT-700C RYKT-1080C
Paper Caliper: Paper box & cardboard box: 250-1000g/m2
Corrugated/flute up to 3mm
Film Thickness: 0.03 - 0.25mm, OPP,PVC,PET,PE etc
Paper Length(B): 140-700mm 200 - 680mm
Paper Width(A): 150-690mm 120 - 1080mm
Film Length (C) 65-380mm 70- 330mm
Film Width(D) 30 - 380mm 30 - 500mm
Single line speed: 21000 pcs/h 6000-19000pcs/h
Power of Pump 1.5KW 1.5KW
Main Power 2.2KW 2.2KW
Weight 1600kg 2700kg
Dimension 6300*1400*1500 mm 6500*1600*1500 mm

Introduction:
This machine is suitable for surface embossing of sheet paper, film, aluminum film, aluminum foil, etc. widely used for paper bag, book cover and etc.
It is an ideal machine for enhancing and aesthetic feeling of the products and decorative effect.

Main Parameterï¼?
Model RYWJ-750A RYWJ-1150A RYWJ-1300A
Embossing Width 750mm 1150mm 1300mm
Embossing Speed 0-38m/min 0-38m/min 0-38m/min
Paper Range â?¥70g/m�² â?¥80g/m�² â?¥80g/m�²
Working Pressure 3-8Mpa 3-8Mpa 3-8Mpa
Main-engines Power 2.2kw 4.0kw 4.0kw
Heating Power 3.0kw 3.0kw 3.0kw
Machine Weight 1350kg 2000kg 2500kg
Overall Dimensions 1750*1100*1500mm 2200*1300*1800mm 2350*1300*1800mm

Introduction:
This machine is suitable for slitting small rolling materials such as paper, aluminum foil, PVC, plastic film, insulation material, etc. it is equipped with frequency converter timing device, constant tension magnetic power control system for unwinding, photoelectric auto error-correction, two pieces magnetic powder clutches, main machine for controlling the center rewinding can be touched with surface, it also has the function of meter can be setup in advance and auto stop working, etc.

Main Technological Parameters:
1. Width: 1100mm
2. Thickness of material: 20g/m2~500g/m2 decided according to the material
3. Max diameter of raw material: �?600mm
4. Max diameter of rewinding: �?150mm
5. Width of material:

The main features:
1) Meler (spanish brand ) Hot melt glue machine;
2) Cardboard automatic feeder,paper send and box forming by automatic;
3) PLC programmable controller, photoelectric tracking system, gas source detection operation system, touch screen man machine interface, implement the carton forming process automation;
4) Infrared security system to ensure safe operation personnel;
5) Automatic fault diagnosis function;
6) Quick die adjustment device;
7) Rack cage design, the overall processing, packet type combination;
8) Small machine footprint, good stability.

The Technical Parameter:
Thickness
of cardboard Min. size 1.5mm
Max. Size 5mm
Power 380V/50Hz
Noise â?¤100dB
Speed 2000-3500pcs/hour
Cardboard stacking height 200mm
Stacked weight 20kg
Total power About 8kw
Glue capacity 8L
Air source 50 Litre/min
Machine weight 1500kg
Dimensions 3165*1400*2465mm(L*W*H)

Technical Parameters:
Model RYFQ-900 RYFQ-1100
Material thickness: 0.012-0.5mmfilm30-350gpaper
Max. Diameter of Raw material: 800mm
(can choose the separated stand, which max. Can put 1400mm)
Paper core: 3#
Max. Effective width of raw material: 800mm 1100mm
Min. Width of Rewinding: 10mm(paper), 5mm(film)
Width of Slitting: 20-800mm
Max. Diameter of rewinding: 500mm
Error-correction length: 150mm
Precision: ±0.15mm
Max. Speed: 350m/min
Slitting speed: 10---350m/min
Total power: 12.5KW
Total weight: 3000KG
Dimension: 2800mm*3400mm*1400mm 3000mm*3400mm*1400mm
Slitting tools: 20sets Standard (can inform the width you want to make, so that we can set the knife basic before send to you)
Upper slitter dimension:
105*75*1.2mm
Brand: shanghai shenlong
Bottom round cutters dimension:
80*20*16mm
Brand: shanghai shenlong
Rewinding shaft 4pcs of air shaft
Diameter of aluminum roller 100mm

Main Parameters:
Model Paper slitting machine RYFQ-1600
Technical parameter Control system
Max width mother roll 1600mm PLC Controller Delta(Taiwan)
Min-width finish roll 35mm Main-machine interface WEINVIEW6070i
Max-diameter mother roll 1500mm Tension sensor Hz100kg
Max-diameter finish roll 1300mm Actuator CHNT
Speed of Slitting 0-300m/min Signal component Omron
Slitting capability 60-700gsm Pneumatic component Airtac
winding way Air expansion winding Program edition RYS-RS2.0
Slitting knife Could up to 18sets Inverter YASKAWA 15KW
Paper giving way By hydraulic clamping Length sensor Have
speed regulation control Inverter outfit assemble
Power input According to customer require Loading material Hydraulic clamping type
Size (mm) L*W*H Unloading material Pneumatic
Unwinding machine 3600 *1600 *1200mm Edge correcting motor Y11 60:1
Rewinding machine (B)3000*1600*1200mm
(C)2450*1200*800mm Count meter Automatic
Up-knife specification 2*110*75mm Tension adjust magnetic powder brake
Down-knife specification 4*110*75mm rewind double airshaft
Total weight 5050kg Slitting by clipper,
Drive system Magnetic powder tension control system
Mainframe power 15KW Enclosed component
Mainframe wheeling speed 1400r/min Air compressor no
Liquid compression motor 1.5kw Useful tool have
Way of correcting edge Hydraulic
Driving way Chain driving
Bearing Wanxiang

Introduction:
The carton stapler uses the servo motor and driver's stop and emergency start actions instead of mechanical clutches and electromagnetic clutches to increase the Kyoto and service life of the nail box machine.
With speed control function, 150-500 nails per minute, free to adjust.
The structure of the head is easy to maintain and operate easily. Cam transmission is used. The alloy head is used for the cutter head. The connecting rod is connected with the bearing to reduce wear and increase service life.
Paper feed section using servo control, precise nail pitch.

Technological Parameters:
Model MJDX-2-1200 MJDX-2-1400 MJDX-2-1600
Max. Paperboard width (C+D) 1200mm 1400mm 1600mm
Length of Arm 1400mm 1600mm 1800mm
Stitch wire spec. 18 # 18 # 18 #
Stitch speed 500nails/min 500nails/min 500nails/min
Machine size 2000*650*1750mm 2200*650*1750mm 2400*650*1750mm
Weight 490kgs 520kgs 550kgs
Power 0.5 HP 0.5 HP 0.5 HP
Paperboard thickness 3 10mm (Normal 3,5,7 layer corrugated board

Main Technical Parameters:
Model RYDP-A4055 RYDP-A4874
Sheet size (before processing) Max. Size 400X520mm 480X740mm
Min. Size 200X275mm 240X280mm
Material Thickness: Die Cutting 0.2mm 0.5mm
127.9 to 400gsm 0.2mm 0.5mm
Max creasing 0.4mm 0.4mm
Final product size
(with separator) Max. size 376mmX520mm 456mmX720mm
Min. size 50mmX80mm 50mmX80mm
Min. discharge width 5mm 5mm
Mold size: Height: 0.8mm 1mm
Max size 400mmX560mm 480mmX750mm
Min size 160mmX100mm 160mmX100mm
X, Y direction die cutting accuracy ±0.1mm ±0.1mm
Feeder stack height: 500mm 500mm
Max Production Speed: 6000 cycles per hour 6000 cycles per hour
Main motor power: 4.5kw 4.5kw
Voltage: 200V-240V50Hz/60Hz Single Phase 200V-240V50Hz/60Hz Single Phase
Weight 1100kg 2440kg
Machine size
(L*W*H) Without table (mm) 3680X980X1250 4620X1300X1650
With table (mm) 4380X980X1250 5320X1300X1650

Main Features:
1. Simple structure in linear type ,easy in installation and maintenance.
2. Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
3. High pressure double crank to control the die opening and closing.
4. Running in a high automatization and intellectualization, no pollution
5. Apply a linker to connect with the air conveyor ,which can directly inline with filling machine .

Technological Parameters:
Item Parameters
Model RYPW60P
Hydraulic Power 60Tons
Bale size 1100*750*(300-1600)MM
Design Capability 3 ~ 4tons/hour
Feed opening size 1600*1100mm
Bale Line 4Lines
Bale Weight 400-500kg/m3
Voltage 200-480V, can be customized
Power 30KW/40HP
Machine Size About 6.97*3.45*2.2m
Machine Weight About 9500KG

Characteristics:
1. Classic model, patented products, applicable to compressing and packaging relatively small materials.
2. Electrical button operation control, with safety interlock, and automatic pull out bale device, contribute to safe and high-efficiency operation.
3. Unique design of door in door, B-Style adopts side-open door.
4. Suitable for waste compressing and disposing in living community, marine ship, hospital, hotel, restaurant, school, milk, chemical or drinking line, etc.

Technological Parameters:
Model MJWP10T-1 MJWP30T-1
Hydraulic power (T) 10T 30T
Bale size (L*W*H) mm 600*400*(350-600) MM 1100*700*(650-900) MM
Feed opening size (L*H) mm 540*450mm 1100*500mm
Capability(bales/h) 6-8Bales/hour 3-6Bales/hour
Bale Weight(kg) 50-80kg 150-250kg
Voltage 110V/60HZ(3 phase) 380V/50HZ(3 phase)
Power 2.2kw/3hp 5.5kw/3hp
Machine size (L*W*H) mm 870*780*2150mm 1500*950*3150mm
Machine weight(KG) 600kg 1200kg
Note:The package size can be chosen by yourself. For other model machines, we can produce as customers requirement.

Main Configuration:
1. 1. Double servo system are brand of YASKAWA, the Asian well-known brand, which provide a stable and accurate stitching distance
2. The control system adopted from Siemens, the well-known brand from Germany
3. All the bearing uses Japan NSK brand
4. The nail head assemblies are made from imported precise processing material and monitored by computerized Numerical control machine
5. The base mould and blade use tungsten steel made by Japan with strong abrasion resistance
6. All switch in the control box of the machine and shift knobs use brand of Schneider from Germany.
7. All flat bell are the brand from Italy, and all triangle belt are made by Taiwan.

Main Technological Parameters:
Model RYXD-1800 RYXD-2400 RYXD-2700 RYXD-3000
Max.Sheet Size (A B)2(mm) 3600 4800 5400 6000
Min.Sheet Sheet Size (A B)2(mm) 1060 1060 1060 1060
Max.Sheet Length(mm) 1450 2250 2550 2850
Min.Sheet Length(mm) 350 350 350 350
Max.Sheet Width(mm) 800 1200 1350 1500
Min.Sheet Width(mm) 180 180 180 180
Min.Sheet Height(C D C)(mm) 400 400 400 400
Stitching Pitch(mm) 20-120 20-120 20-120 20-120
No.of Stitching 1-99 1-99 1-99 1-99
Machine Speed(Stitch/min) 500 500 500 500
Power Required(HP) 13 18 18 18
Machine Length(mm) 6000 6000 6000 6000
Machine Width(mm) 3600 4200 4500 4800
Machine Weight(kg) 5600 5800 5900 6000
Max.Stopper Measurement 450mm(C) 600mm(C)
Max.TS Width 40mm (E) 45mm(E)
Min.First Stitch Pitch 25mm(D) 25mm(D)

Type MJDM-3-1800
The largest collection of paper width 1850mm
Collection of paper length Standard: 500 ~ 3500mm(Can be customized)
Logistics roller Can be configured according to the order
Lateral transport mode Modules belt
Stacking height 1700mm
Maximum production line speed 200m/min
Dimensions Length Ã?? width Ã?? height: 20000Ã??3200Ã??2800mm
Total weight 12T
â?¢ System parameters
Position machine Taiwan WEINVIEW or MCGS TONTEK Color touch screen10.4â??
Lower machine Performance of Taiwan DELTA Series PLC
Lift Control AC servo controller
Frenquency machine Taiwan delta
Low-voltage electrical CHNT, Schnerder Low-voltage electrical
â?¢ Power Parameters
Conveyor roller drive RV reducer: 3kwÃ??5
Horizontal driving basket Gear reducer: 3KWÃ??2
Paper stop car drivers RV reducer: 0.75KW
Lifting drive Worm Reducer: 15KW
Total power About 30 KW

Electrical appliances Configuration:
No. Name Type brand QTY company remark
1 Air Switch 2 CHNT
2 Frequency machine 5 delta (Taiwan) 3.7KW
3 Frequency machine 1 delta (Taiwan) 2.2KW
4 Frequency machine 2 delta (Taiwan) 15KW
5 PLC 1 delta (Taiwan) series PLC
6 Contactor Schneider
7 Switching Power Supply NES Series 3 MW (Taiwan) DC24V
8 Fan 6 JY-FAN (China )
9 Indicator XB Series 8 Schneider (France)
10 Switch ZB Series 7 Schneider (France)
11 Emergency stop switch ZB Series 5 Schneider (France)
12 With lamp reset button ZB Series 12 Schneider (France)
13 Without lamp reset button ZB Series 9 Schneider (France)
14 Two reset operation lever knob 3 Schneider (France)
15 HMI 10.4Inch 1 WEINVIEW (Taiwan)
16 Encoder E-004A 5 NEMION (Japan)
13 Encoder E-003 1 NEMION (Japan)
14 Photoelectric switch E-035A 3 OMRON (Japan)
15 Trip switch XCE-145 6 TEND (Taiwan)
16 Photoelectric switch E-069 1 OMRON (Japan)
17 Bell 1 (China)
18 Three-color lights 1 (China)
19 Red lights 1 (China)
20 Pull the emergency switch 1 (China)

A. Parameter:
Model: RYSP-03-200
Max feeding paper: 150m/min
Working width: 1800mm
Suit for: hydraulic mill roll stand. Reel paper diameter: 1500mm
Feeding paper time: 3 seconds

B. Products Characteristics:
RYSP-03 adopt pneumatic control, the spare parts (pneumatic pipes, pneumatic cylinder, coil, switch, electromagnetic valve) adopt imported brand FESTO
The machine cutting paper knives have more than 15years working life, no need change
PLC control main electric, other adopts Schneider, more stable.
The feeding paper part , only need feed paper 4cm by people , others , the machine can feeding paper by automatic , save time .
Success rate : 99%

Introduction:
MJRS-3 Electrical Roll stand is used in the simple single facer line, for load the paper roll, and rolling paper. It has advantage of good design, beautiful appearance, work stable, and have long life for use.

Technological Parameters:
Model Max. width Min. width Max. diameter Max. Load
MJRS-3-1200 1200 mm 600 mm 1500 mm 2.5t
MJRS-3-1400 1400 mm 600 mm 1500 mm 3.0t
MJRS-3-1600 1600 mm 600 mm 1500 mm 3.0t
MJRS-3-1800 1800 mm 600 mm 1500 mm 3.0t
MJRS-3-2000 2000 mm 600 mm 1500 mm 3.0t
MJRS-3-2200 2200 mm 600 mm 1500 mm 3.0t

Characteristics:
1) The structure is symmetrical, can load two rolls raw paper at the same time, can change the paper roll without stop the machine. The tighten, loosen, up and down, move for center, left and right moving all use electrical control.
2) Effective working width: 1800mm.
3) Max. raw paper diameter: 1400mm
4) Min. raw paper size: 400mm-900mm
5) Max. load of single arm: 1500kg.
6) Each roll sand has two paper roll sending rails, two paper roll up dolly. Rail is made from the welding of the 12# channel steel and direction-leading pole. The dolly is made from 12# channel steel, the length of the rail is 4500mm.
7) Use disk model brake, have handle and electrical models. (can choose.)
8) The clip head is cast-iron finial model or automatic double expanded model. (can choose.)
9) Electrical elements are centralized controlled, this highly improves the production efficiency.

Technological parameters:
1. Paper roll frame working model: Mechanical electrical operation.
2. Paper roll length scope: Max.: 1800mm Min.:900mm
3. Paper roll diameter scope: Max.: 1400mm Min.:400mm
4. Single side max. load: 1500kg.
5. Motor power: (all are planet cycloid motor)
Clip motor: 0.75KW 4units 380V 50HZ
Up and down motor: 2.2KW 1unit 380V 50HZ

Paper roll up-dolly and rail:
1) On the dolly have direction-leading wheel, can send the paper roll stably.
2) Rails are installed inside of the floor, main body is made from 12# channel board and 12 cold drawl steel, the length of the rail is 4500mm.
3) Each roll stand has two paper roll sending rails, two paper roll up dolly, it can load the paper roll in two sides at the same time.

Rollers size:
1. Centre distance between up-knife and down-knife: 230mm.
2. Front down transfer roller:  156mm
3. Back down transfer roller:  156mm
4. Front up paper press roller: 150mm

Power motors and electrical parameters:
1. Main drive motor power: 37KW Full AC synchronous servo
2. Before and after feeding motor power: 3KW(Frequency Control)
3. Lubricating oil pump motor power: 0.18KW*2

Mainly purchased parts, raw materials and origin:
Name of main parts Brands or place of origin Material and type
Full AC servo motor Italy Phase 37KW
Feeding frequency motor Hebei hengshui yongshun
bearing HRB,ZWZ,LYC Up and down the knife roller bearings from Japan NSK
belt Germany OPTIBELT
Up sleeve Xianyang chaoyue
Seat belt bearing Zhejiang wuhuan
Contactors and relays, relays of middle France Schneider
Proximity Switch Japan OMRON
Flying shear servo control system USA Emerson
Motion control board USA Emerson
Rotary encoder Wuxi Ruipu
Feeding drive Taiwan Delta
Human Machine Interface Taiwan WEINVIEW or MCGS
Sun gear China Shenzhen
Pneumatic components Zhejiang Sonor CSM

Characteristics:
1. Computer control intercourse servo controller drives the motor working, has high cutting precision.
2. Have following special functions: Order can be real-time input, the computer can save many different orders, edit, modify, save, real-time monitor (parameters of speed, cut length, rest length, production process and so on.), automatically change order (change in order, change by force), output, alarm for the rest order and so on.
3. Instantaneously control cutting length and numbers, can modify, add or cancel at any moment.
4. The transmission gears are dealt with grinding, spray lubrication.
5. High-quality alloy spiral knife, exactly gears driving, cutting is stable and smooth.
6. Intercourse servo cutting control, high precision, high efficiency and high credibility.
7. Frequency conversion control the transportation of input & output paperboard, synchronize with the production line.
8. Certain length, color-mark tracing the cutting, automatically change order.
9. Colorful touch-screen for easy operation, control and monitor.
10. Run in-phase with the paperboard production line.

Specifications:
Model MJNC-2-1400 MJNC-2-1800 MJNC-2-2200
Width 1400mm 1800mm 2200mm
Cutting length 50 - 9999mm 50 - 9999mm 50 - 9999mm
Order keeping 999orders 999orders 999orders
Cutting precision ±1mm ±1mm ±1mm
Max.design speed 150m/min 150m/min 150m/min
Economic production speed 120m/min 120m/min 120m/min

Introduction:
MJNC-1 High Speed NC paperboard cutter is mainly used for the transversely cutting of the corrugated paperboard, single-face paperboard, industrial paperboard. It is connected to the high-speed 7-layer, 5-layer, 3-layer corrugated paperboard production line and single-facer line. It has high working speed and high cutting precision. The Computer control system use German servo control technology. The technology is advanced all over the world.

Characteristics:
1. Computer control intercourse servo controller drives the motor working, has high cutting precision.
2. Have following special functions: Order can be real-time input, the computer can save many different orders, edit, modify, save, real-time monitor (parameters of speed, cut length, rest length, production process and so on.), automatically change order (change in order, change by force), output, alarm for the rest order and so on.
3. Instantaneously control cutting length and numbers, can modify, add or cancel at any moment.
4. The transmission gears are dealt with grinding, spray lubrication.
5. High-quality alloy spiral knife, exactly gears driving, cutting is stable and smooth.
6. Intercourse servo cutting control, high precision, high efficiency and high credibility.
7. Frequency conversion control the transportation of input & output paperboard, synchronize with the production line.
8. Certain length, color-mark tracing the cutting, automatically change order.
9. Colorful touch-screen for easy operation, control and monitor.
10. Run in-phase with the paperboard production line.

Specifications:
Model MJNC-1-1800 MJNC-1-1800
Width 1800mm 2200mm
Cutting length 50 - 9999mm 50 - 9999mm
Order keeping 999orders 999orders
Cutting precision ±1mm ±1mm
Max.design speed 200m/min 200m/min
Economic production speed 180m/min 180m/min

Introduction:
MJNC-1 High Speed NC paperboard cutter is mainly used for the transversely cutting of the corrugated paperboard, single-face paperboard, industrial paperboard. It is connected to the high-speed 7-layer, 5-layer, 3-layer corrugated paperboard production line and single-facer line. It has high working speed and high cutting precision. The Computer control system use German servo control technology. The technology is advanced all over the world.

Characteristics:
1. Computer control intercourse servo controller drives the motor working, has high cutting precision.
2. Have following special functions: Order can be real-time input, the computer can save many different orders, edit, modify, save, real-time monitor (parameters of speed, cut length, rest length, production process and so on.), automatically change order (change in order, change by force), output, alarm for the rest order and so on.
3. Instantaneously control cutting length and numbers, can modify, add or cancel at any moment.
4. The transmission gears are dealt with grinding, spray lubrication.
5. High-quality alloy spiral knife, exactly gears driving, cutting is stable and smooth.
6. Intercourse servo cutting control, high precision, high efficiency and high credibility.
7. Frequency conversion control the transportation of input & output paperboard, synchronize with the production line.
8. Certain length, color-mark tracing the cutting, automatically change order.
9. Colorful touch-screen for easy operation, control and monitor.
10. Run in-phase with the paperboard production line.

Specifications:
Model MJNC-1-1800 MJNC-1-1800
Width 1800mm 2200mm
Cutting length 50 - 9999mm 50 - 9999mm
Order keeping 999orders 999orders
Cutting precision ±1mm ±1mm
Max.design speed 200m/min 200m/min
Economic production speed 180m/min 180m/min

Slitting part:
1) MJBD-5 type slitter score thin blade machine adopt thin blade knife to cut, the knife is sharp after deal with grinding wheel which make the paperboard edge is smooth, and with less flattening problem, this improve the quality of paperboard and will good for the paper feeding on printing machine, also can reduce waste and improve the quality of cartons.

2) Blade Grinding has two ways: grind by hand and automatic grinding, customer can judge the blade grinding time by paperboard cutting speed. Keep knife sharp will make the paperboard edge smooth and orderly.

3) Electric adjust the knife distance, pneumatic lock and fixation automatically. Manual adjust the score line width. Machine adopt independent single knife lift device which can adjust according to the quantity of paperboard you want to cut; this machine can adjust cutter size with different wear degree arbitrarily.

Feature: Paperboard feeding with rubber wheel, then slitting, then pull paperboard by rubber wheel and finally creasing score line on paperboard. For the last step of creasing can set the depth of the score line, slitting part adopt the high steel slitter knife, transmission knife drive by timing belt, customer can change knife very fast. Machine adopts pastern axes to pull paper which is much better than the normal machine.

Main parameters:
Model MJBD-5-2300
Max. Paperboard width 2300mm
Max. Slitting width 2100mm
Max. Machine speed 120 m/min
Quantity of slitter knife 6
Quantity of score wheel 10
Min. slitting width 140mm
Min. Score width 55mm
Outer diameter of slitter knife 200mm
Thickness of slitter knife 1.3mm
Power of main motor 7.5kw
Power of Blower 3.4kw
Pneumatic pressure ï¼?0.8mpa
Machine size 3000 - 2300 1500mm
Machine weight 1800kg
Min. paperboard width (Distance between the two rubber wheels) 320mm

Main technical specifications:
Width 1800mm
Machine speed 200m/min
Production speed 150m/min
Min. slitter size 135mm
Slitter knives 5set
Scorer wheels 8set
Order change time 3 ~ 8 seconds
Min. scorer size 0mm (double scorer shaft, so can make 0 scorer)
Motor inside Hebei Hengshui Motor
Program Longstar ( taiwan )
Scorer type 3 different type of scorer:

Concave-convex (single wall)
Concave-convex(double wall)
Convex-flat
Scorer type alternated with electricla system

Order bank 999orders
Network System Computer can link to Auto corr Management system,
But the information of existing management system should be provide by User
Display:
--Present order no. length, sheet quantity
--Next order no, length, sheet quantity
--Speed, actual length, set length, preset order

Introduction:
It is a kind of special equipment for all assortments of common card boards, corrugated boards, plastic sheets, leather products. It is suitable for printing, packing, decorating, plastic industries etc. with the features of firm structure, exquisite marking, greet cutting, high precision, ease of operation, safety and reliability etc.

Main Parameter

Model Inner Chase Size Speed Max. Rule Length Motor Power Machine Weight Dimension
MJRY-1-401C 750*520mm 25

The series of model MJTJ-1 gilding, cutting & mark pressurized machine is product of new generation with clockwork precision and marked effect. It is used for gilding-printing all kinds of colored electro-chemical aluminum, marking a concave-convex die-cutting pictures, trade mark, advertisement of sample, boxes, cover of books and new year card, highly decorations and printing materials. It is the optimum equipment for printing, packing, decoration and plastic industries with materials including paper, cardboard, plastic, leather matters.

It adopts high quality material and high tension of casting
It adopts four-shaft bevel wheel structure with steady operation, great cutting, low noise.
Sound and layout of its height, great angle of frame.
Electrical system is designed according to IEC standard.
It has three functions for single slitting, successive slitting, time delay. Its can be adjusted.
Safety protection system is reliable.
Concentrated lubricating system.

Main Specification

Model Max. Platen Working Area Max. Gilding Printing Area Skip Order Range Working Pressure Foil-delivered Length Foil-delivered Group Working Speed Main Motor Overall Power Overall Dimensions Total Weight
MJTJ-1-750 750*520mm 740*510mm Built-in Processing With Computer 100T 500mm 2 groups 1380Time/h 2.2kw 10kw 2150*1400*1900mm 2500kg
MJTJ-1-930 930*670mm 920*660mm Built-in Processing With Computer 170T 640mm 3groups 1320Time/h 4kw 13kw 2200*2000*1950mm 3500kg
MJTJ-1-1040 1020*700mm 1020*700mm Built-in Processing With Computer 170T 700mm 3groups 1320Time/h 4kw 13kw 2230*2100*2000mm 4500kg
MJTJ-1-1100 1080*780mm 1080*780mm Built-in Processing With Computer 220T 800mm 3groups 1200Time/h 5.5kw 19kw 2250*2200*2000mm 5000kg
MJTJ-1-1200 1180*800mm 1180*800mm Built-in Processing With Computer 220T 800mm 3groups 1200Time/h 5.5kw 19kw 2250*2200*2050mm 5500kg
MJTJ-2-1300 1300*920mm 1250*870mm Built-in Processing With Computer 380T 870mm 3groups 900Time/h 7.5kw 25kw 2500*2200*2450mm 6500kg
MJTJ-2-1400 1400*1000mm 1350*950mm Built-in Processing With Computer 380T 950mm 3groups 900Time/h 7.5kw 25kw 2600*2200*2500mm 7200kg
MJTJ-2-1500 1500*1050mm 1450*1000mm Built-in Processing With Computer 380T 1000mm 3groups 900Time/h 7.5kw 25kw 2700*2200*2600mm 8000kg
MJTJ-2-1600 1600*1250mm 1550*1200mm Built-in Processing With Computer 380T 1200mm 3groups 900Time/h 7.5kw 35.5kw 2800*2200*2600mm 12500kg

Main parameters:
Model MJBD-5-2300
Max. Paperboard width 2300mm
Max. Slitting width 2100mm
Max. Machine speed 120 m/min
Quantity of slitter knife 6
Quantity of score wheel 10
Min. slitting width 140mm
Min. Score width 55mm
Outer diameter of slitter knife 200mm
Thickness of slitter knife 1.3mm
Power of main motor 7.5kw
Power of Blower 3.4kw
Pneumatic pressure 0.8mpa
Machine size 300023001500mm
Machine weight 1800kg
Min. paperboard width (Distance between the two rubber wheels) 320mm

Specifications
Model MJBZJ-1-1300 MJBZJ-1-1450 MJBZJ-1-1600
Maximum size (W*L) 1300*1100mm 1450*1450mm 1600*1400mm
Minimum size (W*L) 380*380mm 380*380mm 400*400mm
Max Machine Speed 6000sheets/h 6000sheets/h 6000sheets/h
Total power 11.65kw 11.65kw 15.3kw
Total weight 6800kgs 7200kgs 8000kgs
Dimensions (L*W*H) 14800*2150*2500 mm 14800*2300*2500 mm 15570*2450*2500 mm
Top paper 200-600GSM
Bottom paper A B C D E F G Flute corrugated board,
Cardboard more than 250 gsm.

Main electric components for MJBZJ-2 automatic flute laminator
No. Name Type Specifications Qty Manufacturer
1 PLC DVP-64EH00T 32in32out 1 Delta
2 Touch Screen DOP-AS57CSTD 5.7â?? 256 color 1 Delta
3 Servo controller ASD-A0721-AB 1P 220V 0.75KW 1 Delta
4 Servo controller ASD-A2023-AB 3P 220V 2.0KW 1 Delta
5 Filter 20TDT1W4D EMI 2 Delta
6 Brake resistor BR400W040 400W 40 Ohm 1 Delta
7 Wire for encoder 8 core shielded twisted pair 9m 2 Delta
8 Communication wire for touch screen 6m 1 Delta
9 Frequency Converter VFD-M 2.2KW 1 Delta
10 Frequency Converter VFD-M 1.5KW 1 Delta
11 Frequency Converter VFD-M 0.75KW 1 Delta
12 Servo motor C308007 S 750W 1 Delta
Servo motor E31320 S 2.0KW 1 Delta
13 Dry type isolation transformer 380V/220V Three phase P=3.0KW 1
14 Control transformer BK-300 380/220 P=300W 1 Tengen
15 Air switch TGM10-100/250 60A 1 Tengen
16 Stabilized voltage supply S-50-24 50W 1 Meanwell
17 Proximity switch TL-Q5MC1 1 Omron
18 Proximity switch PM12-04N 4 Fotek
19 Sensor E2R-10N 2 Fotek
20 Glue level controller A61F-G 220V 1
21 Limit switch AZD1002 2 Panasonic
22 Limit switch TZ8112 1 Changde, Taiwan
23 Contactor LC1-E0910 9 Schneider
24 Contactor LC2-E1201 With interlocking block 1set Schneider
25 Intermediate relay Two group of NO DC24V 2S 10 Schneider
26 Thermal relay 1.6-2.5A 2 Schneider
2.5-4A 1 Schneider
4-6A 1 Schneider
5.5-8A 1 Schneider
27 Breaker C65NC10A 3P 10A 1 Schneider
C65NC16A 3P 16A 1 Schneider
C65NC32A 3P 32A 1 Schneider

Main electric configuration:
No. Name Manufacturer Model Specification
1 PLC DELTA DVP-80EH00T 40in 40out
2 PLC extension DELTA DVP-16HM11N 16in
3 Touch screen DELTA DOP-07S411 7 INCH
4 Frequency converter DELTA VFD-E 3.7KW
5 Frequency converter DELTA VFD-E 1.5KW
6 Frequency converter DELTA VFD-E 0.75KW
7 Control card TRIO MC-401
8 Tracking Servo controller YASKAWA SGDV-2R8A01B 400W
9 Servo controller for bottom paper YASKAWA SGD7S-470A00A 6KW
10 Servo controller for bottom paper YASKAWA SGDV-330A01A 4.4KW
11 Isolation transformer 6KW
12 Encoder KOYO 5V 1000 TRD-2T1000V
13 Photoelectric switch OMRON E3T-SL23 PNP
14 Photoelectric switch FOTEK CDR-10X
15 Photoelectric switch OMRON EE-SX670P PNP
16 Proximity switch FOTEK PL-08P
17 Solid relay SDP-1110D DC-DC
18 Solid relay SSR-40DA DC-AC
19 Control transformer TENGEN BK-300 380V/220V
20 Stabilized voltage supply MEANWELL S-250-24 220V/24V
21 Glue level controller
23 Breaker SCHNEIDER NSC 60 E3 040 380V 3P 60A
24 Contactor SCHNEIDER LC1-E0910 AC220V 9A
25 Contactor SCHNEIDER LC1-E3210 AC220V 32A
26 Contactor SCHNEIDER LC1-E1201 AC220V 12A
27 Thermal relay SCHNEIDER 7-10A
28 Thermal relay SCHNEIDER 1.6-2.5A
29 Thermal relay SCHNEIDER 1-1.6A
30 Intermediate relay SCHNEIDER RXM2LB2BD DC24V 5A

Specification:
Model MJBZJ-5-1300 MJBZJ-5-1450 MJBZJ-5-1450L MJBZJ-5-1600
Max Paper size 1300-1100mm 1450-1100mm 1450-1400mm 1600-1400mm
Min Paper size 450-450mm 450-450mm 450-450mm 450-450mm
Max weight for top paper 800g/m 800g/m 800g/m 800g/m
Min weight for top paper 180g/m 180g/m 180g/m 180g/m
Max weight for bottom paper 800g/m 800g/m 800g/m 800g/m
Min weight for bottom paper 300g/m 300g/m 300g/m 300g/m
The Max. thickness of bottom paper 8mm 8mm 8mm 8mm
The Max. thickness of laminated paper(top paper + bottom paper) 10mm 10mm 10mm 10mm
Maximum speed 6000sheets/h 6000sheets/h 6000sheets/h 6000sheets/h
Total power 19.7KW 19.7KW 21.2KW 21.2KW
Dimension 18560-2100-2600mm 18560-2100-2600mm 19970-2250-2600mm 19970-2400-2600mm

Advantages:
1. Beautiful in appearance compact in structure, small in size and durable in service life.
2. Easy in adjustment simple in operation and convenient maintenance.
3. Uniform in glue distribution, quick in bonding and strong in bonding force (20 seconds).
4. Clean in surface with dirt and bonding sides.
5. Automatic alignment, stable in quality, no shrinkage, easy obtaining correctness.
6. Flat, beautiful, low moisture content, without moldy effect.
7. Low consumption of glue (0.01 Yuan per square meter), low power consumption, low in cost, high in efficiency. 4-60pcs/min (adjustable)
8. Applicable for various types of papers (not standard papers) and irregular papers.
9. High-accuracy in recombination, error:0.1-0.5 applicable for paper combination for special requirements.
10.Surface of paper with non-effect (frosted, ice-flower, membrane etc)

Structure Characteristics:
The machine employs the technique of frequency conversion speed regulation, which is photoelectrical counting. Low in noise, small in floor space coverage, low in power consumption and small consumption of various types of wine packaging cartons and other packaging materials with robust effect, flat, stiff and smooth appearance, and without moldy effect, shrinkage. All the parts are interchangeable, so the machine can be upgraded into automatic cone if provided with applicable units. The machine achieves strong adaptability for various papers.

Main Technological Parameters:
Model RYJX-1000B RYJX-1100B
Max. Dimensions 670*930mm 720*1100mm
Min. Dimensions 280*280mm 280*280mm
Recombination Velocity 10-50pic/min 10-50pic/min
Power 380V2.2kw 380V2.2kw
Weight 2000kg 2200kg
Paperboard Thickness
(Face board) 128-700g 128-700g
Paperboard Thickness
(Bottom board) 250-700g 250-700g

Technical Parameters:
Model RYHC-1100 RYHC-1300 RYHC-1500 RYHC-1650 RYHC-1900
Max paper size (mm) 1100X790 1300X940 1500X1100 1650X1200 1900X1400
Min paper size (mm) 400X350 470X420 470X420 550X500 650X550
Max die-cutting size (mm) 1070X770 1280X920 1480X1080 1620X1180 1870X1380
Max working speed 6000S/H 5000S/H 5000S/H 4000S/H 3500S/H
Rated Power 11kw 13.5kw 13.5kw 19.7kw 22kw
Max working pressure 300t 300t 300t 300t 300t
Machine weight (ton) 14/15t 16/17t 18/19t 21/22t 29/30t
Scope of application Paperboard E, B, C, A and AB flute Corrugated paperboard (1-8.5mm thickness)
Cardboard 250gsm.

Technological Parameters:
Model RYHC-1100 RYHC-1300 RYHC-1500 RYHC-1650 RYHC-1650
Max paper size (mm) 1100*790 1300*940 1500*1100 1650*1200 1900*1400
Min paper size (mm) 400*350 470*420 470*420 550*500 650*550
Max die-cutting size (mm) 1070*770 1280*920 1480*1080 1620*1180 1870*1380
Max working speed 6000(s/h) 5000(s/h) 5000(s/h) 4000(s/h) 3500(s/h)
Rated Power 11kw 13.5kw 13.5kw 19.7kw 22kw
Max working pressure 300(t) 300(t) 300(t) 300(t) 300(t)
Machine weight 14/15(t) 16/17(t) 18/19(t) 21/22(t) 27/28(t)
Scope of application Whiteboard 250g,
E, B, C, A and AB flute Corrugated paper 1-8.5mm

Technological Parameters:
Model RYHC-1100 RYHC-1300 RYHC-1500 RYHC-1650 RYHC-1900
Max. Sheet size (mm) 1100*790 1290*940 1500*1100 1650*1210 1900*1400
Min sheet size (mm) 400*350 470*420 470*420 550*500 650*550
Max die cutting size (mm) 1070*770 1280*920 1480*1080 1620*1180 1870*1380
Max. Working speed 6000s/h 5000s/h 5000s/h 4000s/h 3500s/h
Min. Gripper waste 12mm 12mm 12mm 12mm 12mm
Min. gripper margin 6-12mm 6-12mm 6-12mm 6-12mm 6-12mm
Cutting rule height 23.8mm 23.8mm 23.8mm 23.8mm 23.8mm
Electrical power 380v, 50hz, 3ph
Air compressor pump 1.05m3/min; 12kg/cm2 (prepared by user)
Main motor power 11kw 11kw 15kw 15kw 22kw
Max. Working pressure 300TON 300TON 300TON 300TON 300TON
Machine weight 14.5/15 (t) 17/18 (t) 19/20 (t) 24/25 (t) 28/29 (t)
Stock range E, B, C, A and AB flute corrugated paper
(1-8.5mm thickness)

Introduction:
This machine is suitable for surface embossing of rolling paper, film, aluminum film, aluminum foil, etc.
It is an ideal machine for enhancing and aesthetic feeling of the products and decorative effect.

Main Parameters:
Model RYWJ-1100A RYWJ-1300A
Embossing Width 1100mm 1300mm
Embossing Speed 0-38m/min 0-38m/min
Embossing depth 0.1-0.3mm 0.1-0.3mm
Paper Range â?¥80g/m�² â?¥80g/m�²
Working Pressure 5-10Mpa 5-10Mpa
Motor power 2.2kw 2.20kw
Heating Power 3.0kw 3.0kw
Machine Weight 1400kg 1500kg
Overall Dimensions 2000*1160*1500mm 2200*1160*1500mm

Technology Parameter:
Model RYKS-225
Max machine speed 150-200 pieces/min
Max feeding size (L * W) 1700*650mm
Width of printing roller 1600mm
Min feeding size 430mm*170mm
Min slotting 80X80X80X80mm
Printing precision �±0.5mm
Min. Box height 70mm
Dimension (Length*Width*Height) 4000mmX2400mmX1600mm
Introduction
This machine adopt gear grinding and an independent sun feeder Unit. It adopts Shandong Komori sun feeder and is equipped with front and rear communication computers to control the axial rotation adjustment function of the whole machine. The front edge uses a three-row paper feeding wheel feeding method.
It has the function of completing the printing, slotting, corner cutting and trimming of corrugated cardboard at one time. The pressing method is pre-pressing line + main pressing line with four-axis double pressing line, which better improves the pressing and folding line explosion problem. The slotting width is electric adjustment, and it attached a ruler that the scale can be read easily. The phase adjustment of slotting part is planetary gear structure. The machine adopts 360�°electric adjustment. The up and down slotting knives and creasing knives can move synchronously (use exclusive tool to adjust left and right). This small machine is easy to operate and repair easily which is specialized for slotting small boxes.
Printing part
1. Adopts �¦225mm high quality thick seamless steel tube which is surface grinding and hard chromium plating.
2. Adopts �¦152mm 250 or 280 mesh high quality steel anilox roller which is produced by Tengda Dalian.
3. Adopts �¦156mm rubber roller. It is wear-resisting, oil resistance and acid and alkali resistant. The roller is in highly grinding so it is easy to print.
4. The pressure adjustment of printing roller adopt high precision crosshead shoe gapless adjustment to do the slight adjustment, can make the printing pressure reach best condition.
5. The computer adjusts the printing size 360�°, the printing electromechanical button assists the phase adjustment, and the computer phase is the main adjustment. The mechanism uses a planetary gear mechanism. When the machine is not stopped, the 360�° electric button can be adjusted arbitrarily. The machine can be operated while running or stopping.
6. ink pump provide ink automatically, lift printing plate by hand. also with the automatic ink distribution system, which avoid the bad influence to the printing result when ink dry out because of machine stop running. Used 1.2inch PVC ink-back tube, smooth tube wall avoid ink-stuff up and sticking, can send the ink to ink bucket in time to avoid ink-leak phenomenon.

3 Layer
Corrugated cardboard production line includes mill roll stand, single facer, pre-heater, conveyer bridge, gluing machine, slitter scorer machine, cut off machine and stacker. We can produce the three ply, five ply and seven ply corrugated cardboard production line, Widths from 1400 to 2500mm\min,production speeds from 60 to 250 meters/min Customer's can choose according his own needs. We can provide a complete production line and can also provide individual parts to complete customerâ??s own line.

5 Layer
Corrugated cardboard production line includes mill roll stand, single facer, pre-heater, conveyer bridge, gluing machine, slitter scorer machine, cut off machine and stacker. We can produce the three ply, five ply and seven ply corrugated cardboard production line, Widths from 1400 to 2500mm\min,production speeds from 60 to 250 meters/min Customer's can choose according his own needs. We can provide a complete production line and can also provide individual parts to complete customerâ??s own line.

Introduction:
MJZXJ-2 Semi-auto Carton Gluer Machine is new machine for carton production in recent years. It is mainly used for the glue of the carton. It can glue for 3-layer, 5-layer, 7-layer paperboard and so on. The machine structure is easy, working is stable, operation is simple, production efficiency is high, gluing quality is good, production cost is very low. The cost is 15times lower than steel wire stitcher machine.
Machine structure: Machine frame, up and down working-table, front transport equipment, front revising equipment, middle transport equipment, middle press equipment, finished product side output equipment, electrical control equipment.


Characteristics:
1. Easy and reliable operation system.
2. Novel design of the whole machine.
3. High-speed changing sizes.
4. Automatically counting and strap setting.

Technological Parameters:
Model MJZXJ-2
Max. Size (L+W)*2 2460mm
Min. Size (L+W)*2 340mm
Max. Size (W+H)*2 1515mm
Min. Size (W+H)*2 240mm
Paperboard feeding height 900mm
Power 2.2kw
Mechanical Speed 40m/min
Machine Packing Size 4.5*1.95*2.0m
Machine Weight 2000KG
Note: We can produce different size machine as customerâ??s requirements.

Main Technical Parameters:
Model RYHQ-1100c RYHQ-1300c
Max cutting width 1100mm 1300mm
Max diameter of unwinding 1400mm 1400mm
Cutting length 200-1200mm 200-1200mm
Cutting speed 10-140times/min 10-140times/min
Cutting precision ±0.2mm ±0.2mm
Range of raw material thickness 50-500g/ 50-500g/
Height of stacking Max.1200mm Max.1200mm
Total power 7.5kw 8.5kw
Weight (approx. ) 3500kg 3800kg
Overall dimension(LxWxH) 7400x3100x2000mm 7400 3300x2000mm

Introduction:
The carton stapler is the special equipment for nailing the corrugated paper carton and paper box with double-feed device. It can nail double line oblique according to 45degree at the same time and nail the big and middle size paper case continuously or interruptedly.
Sizes available: 600mm, 900mm, 1200mm, 1400mm, 1600mm, 1800mm

Technological parameters:
Model Speed Thickness Length of the arm Machine size Power (Kw) Machine weight
MJDX-3-600 250/min 3,5-layer board 600mm 1.1*0.6*1.76 0.37 300kg
MJDX-3-900 250/min 3,5,7-layer board 900mm 1.4*0.6*1.76 0.37 400kg
MJDX-3-1200 250/min 3,5,7-layer board 1200mm 1.7*0.7*1.82 0.37 600kg
MJDX-3-1400 250/min 3,5,7-layer board 1400mm 1.9*0.7*1.82 0.75 800kg
MJDX-3-1600 250/min 3,5,7-layer board 1600mm 2.1*0.7*1.82 0.75 900kg
MJDX-3-1800 250/min 3,5,7-layer board 1800mm 2.3*0.7*1.82 0.75 1000kg

Parameter:
1 Max. Paperboard (A+B)X2 3400MM
2 Min. Paperboard (A+B)X2 1060MM
3 Length of Max. paperboard (A) 1650MM
4 Length of Min. paperboard (A) 350MM
5 Width of Max. paperboard(B) 900MM
6 Width of Min paperboard (B) 180MM
7 Height of Min. paperboard (C+D+C) 400MM
8 Distance of each nail 30-120MM
9 Nails 1-99 nail
10 Machine speed 450 nailmin
11 Horse power 15HP
12 Machine length 3200MM
13 Machine width 2500MM
14 Machine weight 4000KG

Feature:
1 It can stitch single stitches and double stitches
2 Feeding unit adopt automatic counting
3 First stitch stitching position 25mm
4 Available stitching wire: 18#
5 Max. stitching wire length: 600mm
6 Stitching wire feeding length: 38mm
7 One machine can be single piece or two piece, irregular carton
8 Servo control and touch screen monitor operation menu
9 1 minute size change on screen
10 Used for 57 layer paperboard carton, carton with bottom but no top also can be work

Main Technological Parameters:
Model RYXD-1800 RYXD-2400 RYXD-2700 RYXD-3000
Max.Sheet Size (A B)2(mm) 3600 4800 5400 6000
Min.Sheet Sheet Size (A B)2(mm) 1060 1060 1060 1060
Max.Sheet Length(mm) 1450 2250 2550 2850
Min.Sheet Length(mm) 350 350 350 350
Max.Sheet Width(mm) 800 1200 1350 1500
Min.Sheet Width(mm) 180 180 180 180
Min.Sheet Height(C D C)(mm) 400 400 400 400
Stitching Pitch(mm) 20-120 20-120 20-120 20-120
No.of Stitching 1-99 1-99 1-99 1-99
Machine Speed(Stitch/min) 500 500 500 500
Power Required(HP) 13 18 18 18
Machine Length(mm) 6000 6000 6000 6000
Machine Width(mm) 3600 4200 4500 4800
Machine Weight(kg) 5600 5800 5900 6000
Max.Stopper Measurement 450mm(C) 600mm(C)
Max.TS Width 40mm (E) 45mm(E)
Min.First Stitch Pitch 25mm(D) 25mm(D)

Characteristics:
1. Classic model, patented products, applicable to compressing and packaging relatively small materials.
2. Electrical button operation control, with safety interlock, and automatic pull out bale device, contribute to safe and high-efficiency operation.
3. Unique design of door in door, B-Style adopts side-open door.
4. Suitable for waste compressing and disposing in living community, marine ship, hospital, hotel, restaurant, school, milk, chemical or drinking line, etc.

Technological Parameters:
Model MJWP10T-1 MJWP30T-1
Hydraulic power (T) 10T 30T
Bale size (L*W*H) mm 600*400*(350-600) MM 1100*700*(650-900) MM
Feed opening size (L*H) mm 540*450mm 1100*500mm
Capability(bales/h) 6-8Bales/hour 3-6Bales/hour
Bale Weight(kg) 50-80kg 150-250kg
Voltage 110V/60HZ(3 phase) 380V/50HZ(3 phase)
Power 2.2kw/3hp 5.5kw/3hp
Machine size (L*W*H) mm 870*780*2150mm 1500*950*3150mm
Machine weight(KG) 600kg 1200kg
Note:The package size can be chosen by yourself. For other model machines, we can produce as customers requirement.

Parameters:
Model: 2136L
Free speed: 2100R.P.M
Arg Air Cons: 12CFM
Air pressure: 6-8kg
Air Hose Size: 8/12
Net weight: 4.6kg

Applications:
This series machine is suitable for waste margin stripping of cardboard , thin corrugated paper and common corrugated paper in printing industry. Range for the paper is 150g/m2-1000g/m2 cardboard, single and double corrugated paper, double laminated corrugated paper.

Usage:
Mainly used for remove the corners and strips of paperboard after die-cutting.

Main Technological Parameters:
Model RYSM-2-500 RYSM-2-1000 RYSM-2-1200
Max sheet size (mm) 500400 1000500 1200850
Mini sheet size (mm) 200100 250200 300200
Air pressure 0.75-0.85mpa 0.75-0.85mpa 0.75-0.85mpa
Hole distance (mm) 500400 800500 1000650
Voltage 220V 220V 220V
Cylinder size (mm) 100120 125150 125150
Cylinder standard 100mm 120mm 120mm
Mini hole distance 44mm 44mm 44mm
Max paper thickness 90mm 90mm 90mm
Paper type Cardboard Cardboard corrugated board Cardboard corrugated board
Pin length 186mm 186mm 186mm
Dimension (mm) 8007001250 12008001300 140011001300

Introduction:
ROYAL PACKING is professional producer for Flexo printing plate making machine and materials, Rotary Die-cutting mould making machine and materials, Flat Die-cutting mould making machine, CNC Rotary Die making machine, It is mainly used for the Corrugated paperboard production industry, to service our carton factories.

Introduction
The Thin Blade (Paperboard slitting and pressing line machines) produced by our company is good appearance, good structure, with good design, easy to operation, easy to maintenance, and with competitive price.
The paperboard slitting and pressing machine use thin blade to cutting, the edge of the knives are very sharp, this makes the paperboard after cutting are very good edge, this improves the appearance and quality of the paperboard. Make the paperboard easier for entering printer machine, and improves the quality of the carton. The design of this machine use pressing and pulling paperboard with double wheels, can change wheels base. This means the machines can press and slitting, also can pull paper in front and back, can slitting stably. This is perfect machines for manufacturers of cartons.

Technological Parameters
Model MJBD-1-1600
Max paperboard size (mm) 1600
Max. paperboard cutting width(mm) 1580
Design speed 100m/min
Running speed 80m/min
Blade knives 4 knives
Presslines 6 pairs
Min slitting width (mm) 130
Min pressing width (mm) 30
Outer diameter of the thin blade 220mm or 200mm
Thickness of the thin blade 1.2mm(steel), 1.4mm (alloy)
Power 4.5KW
Pneumatic pressure ï¼?0.4mpa
Machine size (mm) 2000Ã??900Ã??1500
Machine Weight (kg) 1650

Note: For both of above types Thin Blade, you can choose the quantity of knives and press lines. For the sizes, we can make as customers requirement.

Main technical specifications
Width 1800mm
Machine speed 200m/min
Production speed 150m/min
Min. slitter size 135mm
Slitter knives 5set
Scorer wheels 8set
Order change time 3 ~ 8 seconds
Min. scorer size 0mm (double scorer shaft, so can make 0 scorer)
Motor inside Hebei Hengshui Motor
Program Longstar ( taiwan )

Scorer type 3 different type of scorer:
Concave-convex (single wall)
Concave-convex(double wall)
Convex-flat
Scorer type alternated with electricla system
Order bank 999orders

Introduction:
ROYAL PACKING is professional producer for Flexo printing plate making machine and materials, Rotary Die-cutting mould making machine and materials, Flat Die-cutting mould making machine, CNC Rotary Die making machine, It is mainly used for the Corrugated paperboard production industry, to service our carton factories.

Main Technical Parameters
Model RYQJ-1100L RYQJ-1400L
Max unwinding diameter 1400mm
Reference weight of cutting paper 40~500g
Max cut width 1150mm 1450mm
Cutting length 20-1000mm
Cutting speed 10-150times/min
Cutting precision ±0.2mm
Voltage: AC380V/220V, 50HZ
Total power 10KW 11KW
Main function 2rolls
With paper stacker
With round cutter for slitting
With belt transferring

Performance and Characteristics
Adopts pneumatic automatic materials loading system with much easy operation and convenience
Adopts down-up recurrent cutting with orderly finished products and without water caltrop; meantime, it can be used for horizontal cutting and vertical cutting at one time
It adopts servo motor for controlling constant-length cutting
It adopts PLC control, contact screen operation
It adopts pneumatic, displacement sensor for controlling transmission system, with photoelectric, gas together, it has the function of easy operation, high precision, good stability, low noise.
This machine has the function of the frequency converter timing device, automatic counting, stop working by alarm ,magnetic powder tension control, can be vertically, adopt blower fan to get rid of waste
It has the functions of high-precision of cutting, high speed, etc . pneumatic structure combined with computer control be adopted for transmission section ,making it become much more steady operation
It has the function of automatic stacking which is in order . Photoelectric auto tracing subtense system

Introduction:
The Paper roller splitting machine is specially used for cutting paper roller, it can used to cut many sizes as your requirement. Speed is high and good result.

Technological Parameters:
Model RYFQ-1-1500
Max. Roll Dia. 1500mm
Max. paper width 2800mm
Cutting speed 1roll/10min
Size (L*W*H) 5300*3200*2600mm
Power 22kw
Machine weight 6000kg

Introduction:
The Paper roller slitting machine is specially used for cutting paper roller, it can used to cut many sizes as your requirement. Speed is high and good result.

Technological Parameters:
Item Parameters
Model RYSD-1500 RYSD-1800
Max. width 2600mm 3000mm
Min. Diameter 400mm 600mm
Max. Diameter 1550mm 1800mm
Time consuming Itll take 3-6min to cut one roll paper, time consuming conversely to weight. 6 volumes can be cut per hour in average.
Voltage 380V/50HZ (can be design according to customer)
Total Power 40KW 47kw
Weight 4.5T 4.8T
Dimension 4500*3000*2500mm 7000*3500*2800mm
How to Place Plat on level ground, willfully adjust allowed
Blade life time The blade should be sharpened by special tool after 700 times cutting. The blade should be return to factory to be replaced after 6 times polished. We provide the reference price of the blade and the contact of the blade vendor.
Practicality The machine is made with iron accord with GB. It is durable and will not be deformed. Full welding and secure. It manufactured with the famous brand electronic components which is durable and have stable performance.

Introduction:
RYBJ-D Automatic Three-dimensional Carton Forming Machine is an ideal choice to produce hamburger boxes, chips boxes, takeout container, etc. It adopts micro-computer, PLC, alternating current frequency converter, the vacuum-sucking paper feeding, autogluing, automatic paper tape counting, chain drive. All of these main parts and electric control system adopts imported brand to guarantee steady working, precise positioning, smooth running, safety and reliability operation.


RYBJ-D Automatic Three-dimensional Carton Forming Machine is an ideal choice to produce hamburger boxes, chips boxes, takeout container, etc. It adopts micro-computer, PLC, alternating current frequency converter, the vacuum-sucking paper feeding, auto gluing, automatic paper tape counting, chain drive. All of these main parts and electric control system adopts imported brand to guarantee steady working, precise positioning, smooth running, safety and reliability operation.

Introduction:

The machine is welded and painted steel frame; Horizontal loader to help blank positioning, blank picking by vacuum cups controlled by venturi system (one venturi system for each vacuum cup ). Forming head controlled by inverter.
Citrus folding system controlled by pneumatic pistons and with possibility of setting both height and width. Glue applicator equipped. Glue system, hot melt gluing. user friendly interface with touch screen that helps the operator in reading and performing machine parameters. Available size parameters. Painting frame RAL2004 ;Panels RAL7035.

Introduction:

The machine is welded and painted steel frame; Horizontal loader to help blank positioning, blank picking by vacuum cups controlled by venturi system (one venturi system for each vacuum cup ). Forming head controlled by inverter

Citrus folding system controlled by pneumatic pistons and with possibility of setting both height and width. Glue applicator equipped. Glue system, hot melt gluing user friendly interface with touch screen that helps the operator in reading and performing machine parameters. Available size parameters. Painting frame RAL2004 ;Panels RAL7035. Machine designed and manufactured according to the related CE safety riles 2006/42/CE/(2004/108/CE et 2006/95/CE).

Introduction:
The machine is mainly used for the production and processing of the lid and base boxes, and is suitable for food packaging, fruits and vegetable packaging.

PERFORMANCE HIGHLIGHTS:
1. Imported intelligent glue dispensing system with automatic glue compensation;
2. Vacuum suction type automatic paperboard feeding, and the continuous operation of feeding, wrapping, folding and molding is completed in one time;
3. Using PLC programmable controller, photoelectric tracking system, gas source detection and operation system, touch screen man-machine interface, and implementing the whole automation process of the formation of the foldable boxes;
4. Automatically push the cardboard to apply glue front and back, reduce the error of the photoelectric eye to irradiate the cardboard, therefore gluing is more accurate;
5. Infrared safety protection system to ensure the safety of operation personnel;
6. Automatic fault diagnosis function;
7. Automatic quick mold adjustment function;
8. Rack cage design, integral processing, grouped combination;
9. Small footprint and good stability.

Introduction:
The machine is mainly used for packaging Integrated cover carton production, processing, packaging boxes are widely used in clothing and footwear; crafts, daily necessities packaging; electronics, electrical boxes; and hardware, standard parts, such as the need for packaging products manufacture paper boxes.

FEATURES:
1. The use of water-based glue spraying system;
2.cardboard automatic feed, feed coherent operation, edging, folding side and folded into the molding action once completed;
3.PLC programmable controller, photoelectric tracking system, gas source detection operation system, touch screen man machine interface, implement the carton forming process automation;
4. infrared security system to ensure safe operation personnel;
5. automatic fault diagnosis function;
6. quick die adjustment device;
7. rack cage design, the overall processing, packet type combination;
8. small machine footprint, good stability.

Introduction:
The machine is mainly used for packaging Integrated cover carton production, processing, packaging boxes are widely used in clothing and footwear; crafts, daily necessities packaging; electronics, electrical boxes; and hardware, standard parts, such as the need for packaging products manufacture paper boxes.

FEATURES:
1. The use of Thermal sol spraying system;
2. Cardboard automatic feed, feed coherent operation, edging, folding side and folded inTo the molding action once completed;
3. Adopt moving controller, photoelectric tracking system, gas supply inspect system, touch screen int erface, achieve full aotumactic cover injoined box forming process;
4. Infrared security system to ensure safe operation personne
5. Automatic fault diagnosis function;
6. Automatic quick die adjustment device;
7. The replacement module adopts CNC system which speed is fast and with memory function.
8. Rack cage design, the overall processing, packet type combination;
9. Automatic cover box function;
10. Circulation switch function.

Introduction:
The machine is mainly used for packaging Integrated cover carton production, processing, packaging boxes are widely used in clothing and footwear; crafts, daily necessities packaging; electronics, electrical boxes; and hardware, standard parts, such as the need for packaging products manufacture paper boxes.

USAGE:
The machine is mainly used for packaging Integrated cover carton production, processing, packaging boxes are widely used in clothing and footwear; crafts, daily necessities packaging; electronics, electrical boxes; and hardware, standard parts, such as the need for packaging products manufacture paper boxes.

The main features:
1 The use of water-based glue spraying system;
2 Cardboard automatic feed, feed coherent operation, edging, folding side and folded into the molding action once completed;
3 PLC programmable controller, photoelectric tracking system, gas source detection operation system, touch screen man machine interface, implement the carton forming process automation;
4 Automatic quick die adjustment device ;
5 Automatic fault diagnosis function;
6 Quick die adjustment device;
7 Rack cage design, the overall processing, packet type combination;
8 Small machine footprint, good stability.
9 Automatic cover box function.
10 Circulation switch function.

Introduction:
RYHW02Y Slitting & Rewinding machine is specially used for many different kind paper and paperboard, around 50-550g/m2. It is used for slitting and rewinding the big width rollers to small width rollers. It is widely used for the paper &paperboard production factory, carton production factory and so on.

Structure introduction:
This Slitting & Rewinding machine is composed by Roll stand Device, Slitting Equipment, Frame Combination, Drive system, Supporting Roller Device, Paper roller tighten device, Paper press roller device, Paper leading roller device, Pushing roller device, Adjustable multi-section type movable curved roller device, Electrical control device and Pneumatic control system and other components.

1.Roll stand device
1 Roll stand device is located in the back of the main machine body, separately stand with the main machine. It is mainly used for supporting the raw paper roll and adding tension for the paper roll when do the rewinding.
2 This device is composed by Roll stand frame, head, Pneumatic brake, Paper roll head, hydraulic oil cylinder and so on.
3 There are one set hydraulic oil cylinder in both drive side and operation side, it is used for operation the move of the raw paper roll. Action include relative move, opposite move, left move and rive move.
4 Head use mechanical expand structure, such as 3 and 4 .
5 The action of hydraulic oil cylinder is operated by hydraulic station, oil pump motor model Y112M-4,4KW,1500rpm.
6 There is one worm-wheel worm reducer, it is used for the orientation of the raw paper roll. The paper roll will automatically stop at the middle line of the roll stand, then up it to a suitable place with the electrical up and down machine.
7 There are each one unit magnetic powder brake in both operation side and drive side, it is used for adjust the tension of paper roll, it is controlled by the operation case.

2.Slitting Device
1 It is composed by front-round-knife device, back-round-knife device, frame of front-round- knife device and so on. Back-round-knife diameter is 310, front-round-knife device diameter is 190.
2 Paper after pass the leading roll, start to slitting. The back-round-knife device is composed by round-knife, axis and so on. Diameter is 310, totally 5units. The knifes are installed on the axis, when adjust the slitting width, just need loosen the screw. The speed of the bottom-round- knife is controlled by AC frequency conversion motor, model: YVP132S-4, 5.5KW.
3 Front-round-knife is pneumatic adjust, front knives and back knives have totally 5sets.

3.Frame Combination
1 It is Frame Structure which is composed by bottom rail, front machine frame, back machine frame, ross member and so on.

Introduction:
RYHW02Y Slitting & Rewinding machine is specially used for many different kind paper and paperboard, arround 50-550g/m2. It is used for slitting and rewinding the big width rollers to small width rollers. It is widely used for the paper &paperboard production factory, carton production factory and so on.

Structure introduction:
This Slitting & Rewinding machine is composed by Roll stand Device, Slitting Equipment, Frame Combination, Drive system, Supporting Roller Device, Paper roller tighten device, Paper press roller device, Paper leading roller device, Pushing roller device, Adjustable multi-section type movable curved roller device, Electrical control device and Pneumatic control system and other components.

1.Roll stand device
1 Roll stand device is located in the back of the main machine body, separately stand with the main machine. It is mainly used for supporting the raw paper roll and adding tension for the paper roll when do the rewinding.
2 This device is composed by Roll stand frame, head, Pneumatic brake, Paper roll head, hydraulic oil cylinder and so on.
3 There are one set hydraulic oil cylinder in both drive side and operation side, it is used for operation the move of the raw paper roll. Action include relative move, opposite move, left move and rive move.
4 Head use mechanical expand structure, such as 3 and 4.
5 The action of hydraulic oil cylinder is operated by hydraulic station, oil pump motor model Y112M-4,4KW,1500rpm.
6 There is one worm-wheel worm reducer, it is used for the orientation of the raw paper roll. The paper roll will automatically stop at the middle line of the roll stand, then up it to a suitable place with the electrical up and down machine.
7 There are each one unit magnetic powder brake in both operation side and drive side, it is used for adjust the tension of paper roll, it is controlled by the operation case.

2.Slitting Device
1 It is composed by front-round-knife device, back-round-knife device, frame of front-round- knife device and so on. Back-round-knife diameter is 310, front-round-knife device diameter is 190.
2 Paper after pass the leading roll, start to slitting. The back-round-knife device is composed by round-knife, axis and so on. Diameter is 310, totally 5units. The knifes are installed on the axis, when adjust the slitting width, just need loosen the screw. The speed of the bottom-round- knife is controlled by AC frequency conversion motor, model: YVP132S-4, 5.5KW.
3 Front-round-knife is pneumatic adjust, front knives and back knives have totally 5sets.

Introduction:
RYHW02Y Slitting & Rewinding machine is specially used for many different kind paper and paperboard, arround 50-550g/m2. It is used for slitting and rewinding the big width rollers to small width rollers. It is widely used for the paper &paperboard production factory, carton production factory and so on.

Structure introduction:
This Slitting & Rewinding machine is composed by Roll stand Device, Slitting Equipment, Frame Combination, Drive system, Supporting Roller Device, Paper roller tighten device, Paper press roller device, Paper leading roller device, Pushing roller device, Adjustable multi-section type movable curved roller device, Electrical control device and Pneumatic control system and other components.

1.Roll stand device
1 Roll stand device is located in the back of the main machine body, separately stand with the main machine. It is mainly used for supporting the raw paper roll and adding tension for the paper roll when do the rewinding.
2 This device is composed by Roll stand frame, head, Pneumatic brake, Paper roll head, hydraulic oil cylinder and so on.
3 There are one set hydraulic oil cylinder in both drive side and operation side, it is used for operation the move of the raw paper roll. Action include relative move, opposite move, left move and rive move.
4 Head use mechanical expand structure, such as 3 and 4.
5 The action of hydraulic oil cylinder is operated by hydraulic station, oil pump motor model Y112M-4,4KW,1500rpm.
6 There is one worm-wheel worm reducer, it is used for the orientation of the raw paper roll. The paper roll will automatically stop at the middle line of the roll stand, then up it to a suitable place with the electrical up and down machine.
7 There are each one unit magnetic powder brake in both operation side and drive side, it is used for adjust the tension of paper roll, it is controlled by the operation case.

2.Slitting Device
1 It is composed by front-round-knife device, back-round-knife device, frame of front-round- knife device and so on. Back-round-knife diameter is 310, front-round-knife device diameter is 190.
2 Paper after pass the leading roll, start to slitting. The back-round-knife device is composed by round-knife, axis and so on. Diameter is 310, totally 5units. The knifes are installed on the axis, when adjust the slitting width, just need loosen the screw. The speed of the bottom-round- knife is controlled by AC frequency conversion motor, model: YVP132S-4, 5.5KW.
3 Front-round-knife is pneumatic adjust, front knives and back knives have totally 5sets.

Introduction:
RYHW02Y Slitting & Rewinding machine is specially used for many different kind paper and paperboard, around 50-550g/m2. It is used for slitting and rewinding the big width rollers to small width rollers. It is widely used for the paper &paperboard production factory, carton production factory and so on.

Structure introduction:
This Slitting & Rewinding machine is composed by Roll stand Device, Slitting Equipment, Frame Combination, Drive system, Supporting Roller Device, Paper roller tighten device, Paper press roller device, Paper leading roller device, Pushing roller device, Adjustable multi-section type movable curved roller device, Electrical control device and Pneumatic control system and other components.

1.Roll stand device
1 Roll stand device is located in the back of the main machine body, separately stand with the main machine. It is mainly used for supporting the raw paper roll and adding tension for the paper roll when do the rewinding.
2 This device is composed by Roll stand frame, head, Pneumatic brake, Paper roll head, hydraulic oil cylinder and so on.
3 There are one set hydraulic oil cylinder in both drive side and operation side, it is used for operation the move of the raw paper roll. Action include relative move, opposite move, left move and rive move.
4 Head use mechanical expand structure, such as 3 and 4.
5 The action of hydraulic oil cylinder is operated by hydraulic station, oil pump motor model Y112M-4,4KW,1500rpm.
6 There is one worm-wheel worm reducer, it is used for the orientation of the raw paper roll. The paper roll will automatically stop at the middle line of the roll stand, then up it to a suitable place with the electrical up and down machine.
7 There are each one unit magnetic powder brake in both operation side and drive side, it is used for adjust the tension of paper roll, it is controlled by the operation case.

2.Slitting Device
1 It is composed by front-round-knife device, back-round-knife device, frame of front-round- knife device and so on. Back-round-knife diameter is 310, front-round-knife device diameter is 190.
2 Paper after pass the leading roll, start to slitting. The back-round-knife device is composed by round-knife, axis and so on. Diameter is 310, totally 5units. The knifes are installed on the axis, when adjust the slitting width, just need loosen the screw. The speed of the bottom-round- knife is controlled by AC frequency conversion motor, model: YVP132S-4, 5.5KW.
3 Front-round-knife is pneumatic adjust, front knives and back knives have totally 5sets.

Introduction
This Slitting and rewinding machine is widely used for slitting white board paper, carbon-free paper, coated paper, two-side offset paper, etc. It is high speed with 400m/min which can cut 30-510gsm paper and other film materials.

Function description:
Unwinding part
Adopts shaftless hydraulic fixing system, easily for one person operation. Using special conic node system from 3 to 6 for durable using. The 2 sides clamping arm are controlled by the hydraulic dovetail groove linear guideway. 2pcs of hydraulic clamping oil cylinder moves to each side at the same time, easily operation.
2pcs of hydraulic type loading and unloading material oil cylinder can bear 3T material to save the manpower and time.
It does not need to input the material thickness, the proximity switch can inspect the unwinding diameter directly which near the transmission shaft. The machine can slow down according to the rest material, in this way, the worker can prepare for the next roller. The unwinding tension adopts the sensor close-cycle automatic tension, controlled by PLC.
With the manual adjustment system, the unloading material tightness can be controlled. The adjustable range: +/-20mm
Automatic error-correction for the edge position is controlled by the CCD photographic system. The whole frame adopts guide way type to move left and right which driven by the servo motor. The moving part uses thread screw.
Pneumatic material connecting device, with the square steel structure, adopts the way of pneumatic and rubber pressing roll to save the material
Bridge type feeding materials
The unwinding adopts the Italy pneumatic braking.
Precision proportional valve use SMC

Main body part
The bare frame uses the 80# casting material, easily for dismounting and transportation.
The transmission combines the servo motor with synchronous wheel speed ratio.
Automatic traction device adopts pneumatic pressure way. The servo motor drives the mirror roll.
Close-cycle vector control.

Introduction:
This slitting rewinding machine is suitable for slitting small rolling materials such as paper, aluminum foil, PVC, plastic film, insulation material, etc.it is equipped with frequency converter timing device, constant tension magnetic power control system for unwinding, photoelectric auto error-correction, two pieces magnetic powder clutches, main machine for controlling the center rewinding can be touched with surface, double shafts rewinding interlaced without meeting.

Introduction:
This slitter is used for slitting and rewinding various large rolling materials such as paper,(20g/-300g/)cellophane paper, bill paper, double-face adhesive tape, PVC, weave material, non-woven of cloth, etc. Adopt A and B pneumatic shaft structure for rewinding. It adopts photoelectric automatic error correction adjustment system for unwinding, auto materials will be easy slit. Equipped with automatic waste film blowing device. Manual material loading for unwinding with taper cover style pneumatic shaft.

Introduction:
This machine adopts suction belt for feeding paper. It has the function of slitting and pressing at one time. The standard model is four knives and six lines. The power of this machine is divided into three parts. The first power motor is the belt paper feeding part, which adopts variable frequency speed regulation. To control the speed of paper feeding time, the second part of the power motor is the paper slitting and line pressing part. The frequency conversion speed regulation can make the paper slitting speed adjustable, and it is used at a differential speed with the paper feeding motor speed. The third part of the motor is a suction paper feeding motor. When the cardboard is too large or warped, the suction fan is turned on to make the maximum area of the cardboard contact the paper feeding belt to achieve smooth paper feeding. The pressure of the paper feeding shaft and paper separation shaft are all mechanical and manual. Adjust, the upper shaft pressure rises and falls by twisting the pressure handle, and the pressure is adjusted in a coordinated and balanced manner on both sides.

Product Parameter
Model MJKC-3-2000
Max. feeding speed 80m/min
Slitting precision ±1.0mm
Slitting knives distance 60mm
Max. work size 1800mm X 1200mm
Min. work size 450mm X 170mm
Suction motor power 4KW
Feeder motor power 1.5KW
Slitting motor power 0.4KW
Total Power 5.9KW

Introduction:
This machine adopts suction belt for feeding paper. It has the function of slitting and pressing at one time. The standard model is four knives and six lines. The power of this machine is divided into three parts. The first power motor is the belt paper feeding part, which adopts variable frequency speed regulation. To control the speed of paper feeding time, the second part of the power motor is the paper slitting and line pressing part. The frequency conversion speed regulation can make the paper slitting speed adjustable, and it is used at a differential speed with the paper feeding motor speed. The third part of the motor is a suction paper feeding motor. When the cardboard is too large or warped, the suction fan is turned on to make the maximum area of the cardboard contact the paper feeding belt to achieve smooth paper feeding. The pressure of the paper feeding shaft and paper separation shaft are all mechanical and manual. Adjust, the upper shaft pressure rises and falls by twisting the pressure handle, and the pressure is adjusted in a coordinated and balanced manner on both sides.

Product Parameter
Model MJKC-3-2000
Max. feeding speed 80m/min
Slitting precision â?¤�±1.0mm
Slitting knives distance 60mm
Max. work size 1800mm X 1200mm
Min. work size 450mm X 170mm
Suction motor power 4KW
Feeder motor power 1.5KW
Slitting motor power 0.4KW
Total Power 5.9KW

Introduction:

This machine is suitable for slitting small rolling materials such as paper, aluminum foil, PVC, plastic film, insulation material, etc. it is equipped with frequency converter timing device, constant tension magnetic power control system for unwinding, photoelectric auto error-correction, two pieces magnetic powder clutches, main machine for controlling the center rewinding can be touched with surface, it also has the function of meter can be setup in advance and auto stop working, etc.



Main Technological Parameters:

1. Width: 1100mm

2. Thickness of material: 20g/m2~500g/m2 decided according to the material

3. Max diameter of raw material: 600mm

4. Max diameter of rewinding: 150mm

5. Width of material:

Introduction:
This machine is suitable for surface embossing of sheet paper, film, aluminum film, aluminum foil, etc. widely used for paper bag, book cover and etc.
It is an ideal machine for enhancing and aesthetic feeling of the products and decorative effect.

Main Parameterï¼?
Model RYWJ-750A RYWJ-1150A RYWJ-1300A
Embossing Width 750mm 1150mm 1300mm
Embossing Speed 0-38m/min 0-38m/min 0-38m/min
Paper Range â?¥70g/m�² â?¥80g/m�² â?¥80g/m�²
Working Pressure 3-8Mpa 3-8Mpa 3-8Mpa
Main-engines Power 2.2kw 4.0kw 4.0kw
Heating Power 3.0kw 3.0kw 3.0kw
Machine Weight 1350kg 2000kg 2500kg
Overall Dimensions 1750*1100*1500mm 2200*1300*1800mm 2350*1300*1800mm

Introduction:
Window Patching Machines are widely used for sticking films on the windows of various color window boxes, color boxes and paper boxes, e.g medicine box, shirt box, etc.
RYKT-C is the Innovation Machine of Window Patching Machine, Manufactured & Designed by our own Technical Team.
Technical Parameters:
ê?´Previousï¼? Royal Packing Multifunction Window Patching Machine
ê?²Nextï¼? null
Royal Packing Window Patching Machine

Introduction:
Window Patching Machines are widely used for sticking films on the windows of various color window boxes, color boxes and paper boxes, e.g medicine box, shirt box, etc.
RYKT-C is the Innovation Machine of Window Patching Machine, Manufactured & Designed by our own Technical Team.

More Details:
High Speed Window Patching Machine

Introduction:
Window Patching Machines are widely used for sticking films on the windows of various color window boxes, color boxes and paper boxes, e.g medicine box, shirt box, etc.
RYKT-C is the Innovation Machine of Window Patching Machine, Manufactured & Designed by our own Technical Team.
Technical Parameters:
Model RYKT-700C RYKT-1080C
Paper Caliper: Paper box & cardboard box: 250-1000g/m2
Corrugated/flute up to 3mm
Film Thickness: 0.03 - 0.25mm, OPP,PVC,PET,PE etc
Paper Length(B): 140-700mm 200 - 680mm
Paper Width(A): 150-690mm 120 - 1080mm
Film Length (C) 65-380mm 70- 330mm
Film Width(D) 30 - 380mm 30 - 500mm
Single line speed: 21000 pcs/h 6000-19000pcs/h
Power of Pump 1.5KW 1.5KW
Main Power 2.2KW 2.2KW
Weight 1600kg 2700kg
Dimension 6300*1400*1500 mm 6500*1600*1500 mm

Specification:
Model RYC-1400/1700/1900A
Model of cutting paper The upper knife cut reciprocally and the down knife is fixed
Thickness of cutting paper 60-550GSM
(per thickness of per paper are need >60GSM;
Total thickness of five roll are need

Technological Parameters:
Item RYSD-1500A
Max. width 2800mm
Min. Work Diameter 300mm
Max. Work Diameter 1500mm
Main Motor 22KW
Cutting speed 10-15minutes/roll
Voltage 380V/50HZ (can be design according to customer)
Total Power 35KW
Weight 9.0T
Dimension 5000*6000*2600mm

Configuration:
Item Qty. Brand
1. Control System
High-performance heavy-duty Inverter 4units Quality same as ABB
Electric Frequency Conversion Control System 1set High Stability, Independent design
2. Dimension positioning system
Dimensional Inverter motor 1unit 1.1KW, TAILI Brand
Paper holder 2sets Independent design with lifting function
3. Machine system
Gearbox Drive 1set Independent design
Gearbox Bearing 4 sets Japan NSK self-aligning bearing, Japan
High temperature resistant sealing ring 2units Japan NOK Brand
P bearing Japan NSK 4sets LK Brand
4. Cutting System
Paper Holder roller 1set 2.8m length, 194mm diameter, 25mm thickness
Main Motor 1unit 22KW, quality same as ABB
Paper holder Frequency Motor 1unit 1.5KW, Made in Taiwan
Alloy Band Saw Blade 4pcs Good stability, durability without deformation and swing, high safety.
New Design Dust-free vacuum hood 1set Independent design
Accessories Spare parts 3pcs Band Saw Blade
2units Professional dust bag
1set Allen wrench
8units Buttons/switch
1set Screwdriver
2units Vacuum tubes
1unit Operate Manual

Technological Parameters:
Item Parameters
Model RYSD-1500 RYSD-1800
Max. width 2600mm 3000mm
Min. Diameter 400mm 600mm
Max. Diameter 1550mm 1800mm
Time consuming It'll take 3-6min to cut one roll paper, time consuming conversely to weight. 6 volumes can be cut per hour in average.
Voltage 380V/50HZ (can be design according to customer)
Total Power 40KW 47kw
Weight 4.5T 4.8T
Dimension 4500*3000*2500mm 7000*3500*2800mm
How to Place Plat on level ground, willfully adjust allowed
Blade life time The blade should be sharpened by special tool after 700 times cutting. The blade should be return to factory to be replaced after 6 times polished. We provide the reference price of the blade and the contact of the blade vendor.
Practicality The machine is made with iron accord with GB. It is durable and will not be deformed. Full welding and secure. It manufactured with the famous brand electronic components which is durable and have stable performance.

Main Spare Parts (RYSD-1500)
1. Control System
The machine use high performance variable frequency driving system, High quality, easy operation and stable
Item Qty. Origin Note
High-performance overloading inverter 4unit China 30KW 1unit 1.5KW 3unit
Electric frequency control system
1set High stability
2. Size positioning system
Inverter motor for measure size 1unit Taiwan 1.1KW
Paper stand 2set China Factory made
3.Mechanical system
Reduce gearbox driver 1set China High speed, high quality
Reduce gearbox bearing 4set Japan NSK Tip Bearing
High temperature seal ring 2unit Japan NOK
Japan NSK P bearing 4set LK
Machine transmission shaft and mechanical parts are adopt digital controlled lathe processing, good quality and high precision.
4.Cutting system
Shaft roller for Paper 1set China Length:2.8m, Dia.:194mm, thick: 25mm high quality material good running
Main inverter motor 1unit 30K imported Quality same as ABB motor
Paper Stand Inverter motor 1unit 1.5KW Taiwan
Alloy Blade1850*12mm 1psc Saw body: 80 chromium Germany Saw head made in Taiwan Blade modulation, dynamic balance, heat treatment process. Good stability and durability deformation swing, safety performance
5. Inner vacuum negative pressure fan 2unit High stability Reduce 80% dust
6. Dust hood 1unit China Factory made

Introduction:
The Paper roller splitting machine is specially used for cutting paper roller, it can used to cut many sizes as your requirement. Speed is high and good result.

Technological Parameters:
Model RYFQ-1-1500
Max. Roll Dia. 1500mm
Max. paper width 2800mm
Cutting speed 1roll/10min
Size (L*W*H) 5300*3200*2600mm
Power 22kw
Machine weight 6000kg

Main Technical Parameters
Model RYQJ-1100L RYQJ-1400L
Max unwinding diameter 1400mm
Reference weight of cutting paper 40~500g
Max cut width 1150mm 1450mm
Cutting length 20-1000mm
Cutting speed 10-150times/min
Cutting precision ±0.2mm
Voltage: AC380V/220V, 50HZ
Total power 10KW 11KW
Main function 2rolls
With paper stacker
With round cutter for slitting
With belt transferring

Technical parameters:
1. Effective width: 1800mm
2. Operate direction: left or right(Determined in accordance with the customer's facility)
3. Design speed: 150m/min, Running Speed: 120m/min.
4. Range of temperature: 160 ~ 180
5. Air source: 0.4 ~ 0.9Mpa
6. Steam pressure: 0.8 ~ 1.3Mpa
7. Corrugate flute (UV type or UVV type)

Roller diameter parameters:
1. Diameter of corrugated roller:  320mm
2. Diameter of pressure roller:  324mm
3. Diameter of glue roller:  242mm
4. Diameter of preheat roller:  325mm
Powered motor parameters:
1. Main drive motor: 18.5KW rated voltage: 380V 50Hz
continuous (S1) working system
2. Suction motor: 11KW rated voltage: 380V 50Hz
continuous (S1) working system
3. Adjust glue reducer: 100W rated voltage: 380V 50Hz
short (S2) working system
4. Adjust glue gap motor: 250W rated voltage: 380V 50Hz
short (S2) working system
5. Glue pump motor: 2.2KW rated voltage: 380V 50Hz
continuous (S1) working system

Main parameters:
Model MJBD-5-2300
Max. Paperboard width 2300mm
Max. Slitting width 2100mm
Max. Machine speed 120 m/min
Quantity of slitter knife 6
Quantity of score wheel 10
Min. slitting width 140mm
Min. Score width 55mm
Outer diameter of slitter knife 200mm
Thickness of slitter knife 1.3mm
Power of main motor 7.5kw
Power of Blower 3.4kw
Pneumatic pressure 0.8mpa
Machine size 3000-2300-1500mm
Machine weight 1800kg
Min. paperboard width (Distance between the two rubber wheels) 320mm

A. RYHM-2A A4 paper cutting machine
A-1. Main Technical Parameter
Paper Width Gross width 860mm, net width 845mm
Cutting numbers 4 cutting-A4 210mm (width)
Paper rolls diameter Max. 1500mm. Min. 600mm
Paper cores diameter 3(76.2mm)or 6(152.4mm) or according to the clients demand
Packing Paper grade High-grade copy paper; High-grade office paper; High grade Free Wood paper etc.
Paper weight 60-100g/m2
Sheet length 297mm ( specially design for A4 paper, the cutting length is 297mm)
Ream amount 500 sheets Max. Height: 45-55mm
Production speed Max 0-250m/min(depends on different paper quality)
Max. Numbers of cutting Max 670/min
Output of the ream Max 30-34 reams/min
Load of cutting 500g/m2 (5100g/m2)
Cutting accuracy ±0.2mm
Cutting condition No variation of the speed, no break, cut all the paper at one time and need the eligible paper.
Power 34KW
Air consumption 300NL/min
Air pressure 6 bar
Edge cutting 210mm
Safety standard Design according the safety standard of China

A-2. Standard Configuration
1. Unwind Stand
A-1 Type: RYHM-5
1) Machine Type Each machine table can take 2 sets of shaftless paper rack.
2) Diameter of the paper roll Max. 1500mm
3) Width of the paper roll Max. 860mm
4) Paper racks material Steel
5) Clutch device Pneumatic Braker and control
6) Clip arms adjustment Manual adjust by oil pressure
7) Paper core demanding 3(76.2mm)or 6(152.4mm) or according to the clients need

Introduction:

ROYAL PACKING is professional producer for Flexo printing plate making machine and materials, Rotary Die-cutting mould making machine and materials, Flat Die-cutting mould making machine, CNC Rotary Die making machine, It is mainly used for the Corrugated paperboard production industry, to service our carton factories.

ROYAL PACKING is professional producer for Flexo printing plate making machine and materials, Rotary Die-cutting mould making machine and materials, Flat Die-cutting mould making machine, CNC Rotary Die making machine, It is mainly used for the Corrugated paperboard production industry, to service our carton factories.

Technological Parameters:
Item Parameters
Model RYPW60P
Hydraulic Power 60Tons
Bale size 1100*750*(300-1600)MM
Design Capability 3 ~ 4tons/hour
Feed opening size 1600*1100mm
Bale Line 4Lines
Bale Weight 400-500kg/m3
Voltage 200-480V, can be customized
Power 30KW/40HP
Machine Size About 6.97*3.45*2.2m
Machine Weight About 9500KG

Introduction:
It is an ideal equipment of processing the raw materials including Paper tube, wood branch, round logs, square blocks, and wood pieces into wood chips once.
It has compact structure, reliable simple operation and solves the problem of the large difficult wood feeding.
RYX model Paper tube shredder machine is widly used in production of paper making, edible fungus, shaving board, sawdust, high density board, fiber board and so on.

How It Works:
The Paper tube is fed into through feed port, when it touches to cut blade, along with the cutting knife plate of high-speed rotation to peel and cut,
At last, these wood pieces are sent out through high speed steam-flow produced by fan blade in the knife plate.

Specification:
Model Power Capacity Input opener Dimension Weight
RYX-600 22KW 1~3 T/H 150*140 mm 1.6*1*1.4m 880kg
RYX-800 37KW 3~6 T/H 170*160 mm 1.8*1.1*1.5m 1680kg

Remarks:
Motor voltage: 380V/50Hz; three phases
Payment terms: T/T; 40% as deposit, the balance is paid before delivery
Delivery: 10-20 days after receiving the deposit
Package: wooden case
Shipment: by sea
Warranty: 12 months except spare parts, counting from delivery date

Machine parameter:
Model RYJP-1500 RYJP-2000
Inlet (L*H) mm 1500*150 2000*150
Crushing capacity ( kg/h) 1500 2000
Power (kw/hp) 11KW/15HP 15KW/20HP
Voltage (customizable) 380V/50HZ 380V/50HZ
Machine size (L*W*H)mm 2100*1750*2000 2600*1850*2100
Machine weight 4000kg 5000kg

Main Configuration:
1. 1. Double servo system are brand of YASKAWA, the Asian well-known brand, which provide a stable and accurate stitching distance
2. The control system adopted from Siemens, the well-known brand from Germany
3. All the bearing uses Japan NSK brand
4. The nail head assemblies are made from imported precise processing material and monitored by computerized Numerical control machine
5. The base mould and blade use tungsten steel made by Japan with strong abrasion resistance
6. All switch in the control box of the machine and shift knobs use brand of Schneider from Germany.
7. All flat bell are the brand from Italy, and all triangle belt are made by Taiwan.

Main Technological Parameters:
Model RYXD-1800 RYXD-2400 RYXD-2700 RYXD-3000
Max.Sheet Size (A B)-2(mm) 3600 4800 5400 6000
Min.Sheet Sheet Size (A B)-2(mm) 1060 1060 1060 1060
Max.Sheet Length(mm) 1450 2250 2550 2850
Min.Sheet Length(mm) 350 350 350 350
Max.Sheet Width(mm) 800 1200 1350 1500
Min.Sheet Width(mm) 180 180 180 180
Min.Sheet Height(C D C)(mm) 400 400 400 400
Stitching Pitch(mm) 20-120 20-120 20-120 20-120
No.of Stitching 1-99 1-99 1-99 1-99
Machine Speed(Stitch/min) 500 500 500 500
Power Required(HP) 13 18 18 18
Machine Length(mm) 6000 6000 6000 6000
Machine Width(mm) 3600 4200 4500 4800
Machine Weight(kg) 5600 5800 5900 6000
Max.Stopper Measurement 450mm(C) 600mm(C)
Max.TS Width 40mm (E) 45mm(E)
Min.First Stitch Pitch 25mm(D) 25mm(D)

Introduction:
The carton stapler is the special equipment for nailing the corrugated paper carton and paper box with double-feed device. It can nail double line oblique according to 45degree at the same time and nail the big and middle size paper case continuously or interruptedly.
Sizes available: 600mm, 900mm, 1200mm, 1400mm, 1600mm, 1800mm

Technological parameters:
Model Speed Thickness Length of the arm Machine size Power (Kw) Machine weight
MJDX-3-600 250/min 3,5-layer board 600mm 1.1*0.6*1.76 0.37 300kg
MJDX-3-900 250/min 3,5,7-layer board 900mm 1.4*0.6*1.76 0.37 400kg
MJDX-3-1200 250/min 3,5,7-layer board 1200mm 1.7*0.7*1.82 0.37 600kg
MJDX-3-1400 250/min 3,5,7-layer board 1400mm 1.9*0.7*1.82 0.75 800kg
MJDX-3-1600 250/min 3,5,7-layer board 1600mm 2.1*0.7*1.82 0.75 900kg
MJDX-3-1800 250/min 3,5,7-layer board 1800mm 2.3*0.7*1.82 0.75 1000kg

Introduction:
The carton stapler uses the servo motor and driver's stop and emergency start actions instead of mechanical clutches and electromagnetic clutches to increase the Kyoto and service life of the nail box machine.
With speed control function, 150-500 nails per minute, free to adjust.
The structure of the head is easy to maintain and operate easily. Cam transmission is used. The alloy head is used for the cutter head. The connecting rod is connected with the bearing to reduce wear and increase service life.
Paper feed section using servo control, precise nail pitch.

Technological Parameters:
Model MJDX-2-1200 MJDX-2-1400 MJDX-2-1600
Max. Paperboard width (C+D) 1200mm 1400mm 1600mm
Length of Arm 1400mm 1600mm 1800mm
Stitch wire spec. 18 # 18 # 18 #
Stitch speed 500nails/min 500nails/min 500nails/min
Machine size 2000*650*1750mm 2200*650*1750mm 2400*650*1750mm
Weight 490kgs 520kgs 550kgs
Power 0.5 HP 0.5 HP 0.5 HP
Paperboard thickness 3 10mm (Normal 3,5,7 layer corrugated board

Technology Parameter:
Model MJBL-4
Economic speed 60-80pcs/min
Max feeding size 1400X2600mm
Max printing size 1400X2400mm
Min feeding size 380x750mm
Wallboard thickness 40 mm
Main power 7.5kw
Thickness 2-11mm
Plate roller axial adjustm ±5mm
Plate roller radial adjustment 360

Machine Parameters:
Model RYKB-1625
machine inner width 2500mm
design speed 100 sheets/min
economic speed 80 sheets/min
max feeding size 1600Ã??2500mmmm
min feeding size 450Ã??750mm
printing thickness of cardboard 3-11mm
printing precision ±0.5mm
max printing area 1600-2400mm
Slotting L245x W80x L240x W80
Axial adjustment of printing roller ±5mm

Structural feature:
It can save 200 units orders replace the cutter specifications quickly and accurately changing orders without stop, And enables networked computers to facilitate production management.
Knife shaft drive gears are precision forged steel induction hardening, backlash-free transmission, advanced keyless connection, high transmission accuracy.
Cutting machine adopts inlaid front steel blade knife spiral structure, serrated knife. scissors, shears, shear force, long blade life.
around feed rollers are used the sun gear platen way, smooth delivery, pressure evenly, easy to crush plate board or cause blockage.
This model is the braking energy storage (non-dynamic braking), so the energy consumption in the production process, the average electricity consumption is 1/3 of an ordinary NC cutting machine, saving more than 70% power to reach the goal of saving money .
Precision adjustable no gap gear to ensure precise blade engagement, running balance.
Using an independent oil pump and filter with two copper distribution in each gear position oil, lubrication and cooling.
Knife roller: fine quality forged steel material, the balanced, with good stability.

Technical parameters:
1. Effective width: 1800mm
2. Operation direction: left or right (determined to the customers factory)
3. Highest machinery speed: 200m/min, Economic running speed: 150m/min.
4. Mechanical configuration: computer-control helical cross cutter
5. Minimum cutting length: 500mm
6. Maximum cutting length: 9999mm
7. Precision of cutting paper: uniform speed: ±1mm non-uniform speed: ±2mm
8. Equipment size: Lmx5.0*Wmx2.0*Hmx2.0

Rollers size:
1. Centre distance between up-knife and down-knife:  230mm.
2. Front down transfer roller:  156mm
3. Back down transfer roller:  156mm
4. Front up paper press roller:  150mm

Power motors and electrical parameters:
1. Main drive motor power: 37KW Full AC synchronous servo
2. Before and after feeding motor power: 3KW(Frequency Control)
3. Lubricating oil pump motor power: 0.18KW*2

Mainly purchased parts, raw materials and origin:
Name of main parts Brands or place of origin Material and type
Full AC servo motor Italy Phase 37KW
Feeding frequency motor Hebei hengshui yongshun
bearing HRB,ZWZ,LYC Up and down the knife roller bearings from Japan NSK
belt Germany OPTIBELT
Up sleeve Xianyang chaoyue
Seat belt bearing Zhejiang wuhuan
Contactors and relays, relays of middle France Schneider
Proximity Switch Japan OMRON
Flying shear servo control system USA Emerson
Motion control board USA Emerson
Rotary encoder Wuxi Ruipu
Feeding drive Taiwan Delta
Human Machine Interface Taiwan WEINVIEW or MCGS
Sun gear China Shenzhen
Pneumatic components Zhejiang Sonor CSM

Introduction:
MJNC-2 series NC paperboard cutter is mainly used for the transversely cutting of the corrugated paperboard, single-face paperboard, industrial paperboard. It is connected to the high-speed 7-layer, 5-layer, 3-layer corrugated paperboard production line and single-facer line. It has high working speed and high cutting precision. The Computer control system use German servo control technology. The technology is advanced all over the world.

Characteristics:
1. Computer control intercourse servo controller drives the motor working, has high cutting precision.
2. Have following special functions: Order can be real-time input, the computer can save many different orders, edit, modify, save, real-time monitor (parameters of speed, cut length, rest length, production process and so on.), automatically change order (change in order, change by force), output, alarm for the rest order and so on.
3. Instantaneously control cutting length and numbers, can modify, add or cancel at any moment.
4. The transmission gears are dealt with grinding, spray lubrication.
5. High-quality alloy spiral knife, exactly gears driving, cutting is stable and smooth.
6. Intercourse servo cutting control, high precision, high efficiency and high credibility.
7. Frequency conversion control the transportation of input & output paperboard, synchronize with the production line.
8. Certain length, color-mark tracing the cutting, automatically change order.
9. Colorful touch-screen for easy operation, control and monitor.
10. Run in-phase with the paperboard production line.

Specifications:
Model MJNC-2-1400 MJNC-2-1800 MJNC-2-2200
Width 1400mm 1800mm 2200mm
Cutting length 50 - 9999mm 50 - 9999mm 50 - 9999mm
Order keeping 999orders 999orders 999orders
Cutting precision ±1mm ±1mm ±1mm
Max. design speed 150m/min 150m/min 150m/min
Economic production speed 120m/min 120m/min 120m/min

Main Parameters
Model MJKC-1-600
Max machine speed 200pieces/min
Max feeding size (L * W) 1700*650mm
Min feeding size (L * W) 430*170mm
Min slotting interval 80*80*80*80mm
Min height of box (H) 70mm

Introduction
This machine adopts the vacuum adsorption auxiliary sun feeder system feeding mode. Automatic feeder.
It has the function of slotting, chamfering, dividing edge and rolling line of corrugated board at one time. The machine and slotting depth are all electrically adjusted, and the scale reading is attached. The slotted phase adjustment mechanism is a planetary gear structure, which adopts an electric computer-type 360-degree adjustment, and the upper and lower slotted cutter heads and the pressure roller are synchronously moved left and right. (Note: special tools adjust the left and right movement), which is convenient to use and maintain, small and exquisite, It is a professional equipment for slotting and forming small cartons.
1. The slotting blade head is made of all-steel parts. The slotted cutter adopts a sawtooth curved semicircular cutter to cut the chip and remove the chip. After the slotting is completed, the cardboard enters the paper separation shaft, and the paper separator cuts the two sides of the carton neatly. (Note: The pressure roller and the paper cutter are installed on the same axis for easy adjustment.)
2. Slotting plate adopt full steel processed accessories, slotting knives adopt zigzagarc-shaped semicircle knives to slot and remove the scrap, paperboard get into slitting roller after slotting, slitting knives slit both sides of the paperboard
3. This machine is equipped with a frequency converter (can be adjusted freely and slowly).

Introduction:
MJNC-1 High Speed NC paperboard cutter is mainly used for the transversely cutting of the corrugated paperboard, single-face paperboard, industrial paperboard. It is connected to the high-speed 7-layer, 5-layer, 3-layer corrugated paperboard production line and single-facer line. It has high working speed and high cutting precision. The Computer control system use German servo control technology. The technology is advanced all over the world.

Characteristics:
1. Computer control intercourse servo controller drives the motor working, has high cutting precision.
2. Have following special functions: Order can be real-time input, the computer can save many different orders, edit, modify, save, real-time monitor (parameters of speed, cut length, rest length, production process and so on.), automatically change order (change in order, change by force), output, alarm for the rest order and so on.
3. Instantaneously control cutting length and numbers, can modify, add or cancel at any moment.
4. The transmission gears are dealt with grinding, spray lubrication.
5. High-quality alloy spiral knife, exactly gears driving, cutting is stable and smooth.
6. Intercourse servo cutting control, high precision, high efficiency and high credibility.
7. Frequency conversion control the transportation of input & output paperboard, synchronize with the production line.
8. Certain length, color-mark tracing the cutting, automatically change order.
9. Colorful touch-screen for easy operation, control and monitor.
10. Run in-phase with the paperboard production line.

Specifications:
Model MJNC-1-1800 MJNC-1-1800
Width 1800mm 2200mm
Cutting length 50 - 9999mm 50 - 9999mm
Order keeping 999orders 999orders
Cutting precision ±1mm ±1mm
Max.design speed 200m/min 200m/min
Economic production speed 180m/min 180m/min

Detail Introduction:
Automatic feeding part:
1) Machine adopts screw rod to adjust paperboard Size, only one worker can easy and fast to finish adjust.
2) Paperboard Size adjustment structure which is better adapt to different length paperboard, and paper feeding is stable and accurate.
3) Feeding Belt adopt high quality rubber seamless belt, which can bear great friction force and with long using life

Slitting part:
1) MJBD-5 type slitter score thin blade machine adopt thin blade knife to cut, the knife is sharp after deal with grinding wheel which make the paperboard edge is smooth, and with less flattening problem, this improve the quality of paperboard and will good for the paper feeding on printing machine, also can reduce waste and improve the quality of cartons.

2) Blade Grinding has two ways: grind by hand and automatic grinding, customer can judge the blade grinding time by paperboard cutting speed. Keep knife sharp will make the paperboard edge smooth and orderly.

3) Electric adjust the knife distance, pneumatic lock and fixation automatically. Manual adjust the score line width. Machine adopt independent single knife lift device which can adjust according to the quantity of paperboard you want to cut; this machine can adjust cutter size with different wear degree arbitrarily.

Feature: Paperboard feeding with rubber wheel, then slitting, then pull paperboard by rubber wheel and finally creasing score line on paperboard. For the last step of creasing can set the depth of the score line, slitting part adopt the high steel slitter knife, transmission knife drive by timing belt, customer can change knife very fast. Machine adopts pastern axes to pull paper which is much better than the normal machine.

Main parameters:
Model MJBD-5-2300
Max. Paperboard width 2300mm
Max. Slitting width 2100mm
Max. Machine speed 120 m/min
Quantity of slitter knife 6
Quantity of score wheel 10
Min. slitting width 140mm
Min. Score width 55mm
Outer diameter of slitter knife 200mm
Thickness of slitter knife 1.3mm
Power of main motor 7.5kw
Power of Blower 3.4kw
Pneumatic pressure ï¼?0.8mpa
Machine size 3000x2300x1500mm
Machine weight 1800kg
Min. paperboard width (Distance between the two rubber wheels) 320mm

Introduction
MJKC-2 High-speed Automatic Clapboard Machine is mainly used for producing the clapboard of carton for wine, beverage, medicine, fruits, electrical products, glass products and so on. It can also make small boxes. It is good choice for carton factory. The machine has following characteristics: novel structure, beautiful appearance, stable running, easy operation, automatic feeding, the processing size can be adjusted, safe and reliable, high-efficiency and so on.

Technological Parameters:
Processing size 1200(Max.width) 400mm(Max.Height)
100(Min.Width) 90mm(Min.Height)
Min. distance for slotting Width between two slot is 45mm.
Width of slotting 3.5mm
Max. Working speed 120times/min.
Three-phase inverter motor Inverter motor 1.1WK
Machine size 1550mmx1550mmx1220mm
Knife quantity 9sets

Main Parameters;
B Min. 700mm
Max. 2800mm
A Min. 420mm
Max. 1600mm
A (paper skip feeding) Max. 2000mm
C Min. 350mm
Max. 1500mm
E Min. 150mm
Max. 2000mm
D Min. 250mm
Max. 1000mm
F Min. 35mm
Max. 50mm
G Min. 100mm
Max. 830mm
Square Carton Max. 700X700m
Min. 250X250mm
Paperboard thickness Max. 11mm
Min. 3mm
Max. Slot Depth 400mm
Slot width (T) 7mm
Max. work speed 150pcs/min
Economic speed 120 pcs/min
Main motor 20KW
Total Power 30KW
Weight 7500kg
Dimension 5200*2000*2200m

Functions and features:
1) This machine adopts photoelectric and pneumatic joint control, which is safe and efficient. The template can complete the processes of slotting, corner cutting and creasing of the corresponding box at one time.
2) Adopt advanced leading edge paper feeding system, vacuum adsorption auxiliary feeding, adjustable air volume, high accuracy and fast speed.
3) Electric adjustment of the workbench backstop and cardboard pusher.
4) Side baffle electric PLC control, text display input adjustment.
5) The paper feeding roller gently presses the grooved rubber surface structure to accurately feed paper and protect the cardboard.
6) The transmission gear is made of high-quality 20CrMnTi and 40Cr alloy steel materials, high-frequency quenching, precision grinding, and six-level precision. Automatic spray lubrication makes the gears durable.
7) Planetary electric phase adjustment, PLC text display
8) The axial direction of the grooving knife adopts double screw rod linkage, with a trimming knife, and the middle knife can move in a wide range
9) Circumferential adjustment of the grooving knife and electric computer adjustment of the internal teeth
10) The slotting machine can be changed with a single button in 2-3 minutes, with zero reset memory, including front edge side blocks and rear brackets.

Main technical specifications:
Width 1800mm
Machine speed 200m/min
Production speed 150m/min
Min. slitter size 135mm
Slitter knives 5set
Scorer wheels 8set
Order change time 3 ~ 8 seconds
Min. scorer size 0mm (double scorer shaft, so can make 0 scorer)
Motor inside Hebei Hengshui Motor
Program Longstar ( taiwan )
Scorer type 3 different type of scorer:

Concave-convex (single wall)
Concave-convex(double wall)
Convex-flat
Scorer type alternated with electricla system

Order bank 999orders
Network System Computer can link to Auto corr Management system,
But the information of existing management system should be provide by User
Display:
--Present order no. length, sheet quantity
--Next order no, length, sheet quantity
--Speed, actual length, set length, preset order

Introduction:
The Thin Blade (Paperboard slitting and pressing line machines) produced by our company is good appearance, good structure, with good design, easy to operation, easy to maintenance, and with competitive price.
The paperboard slitting and pressing machine use thin blade to cutting, the edge of the knives are very sharp, this makes the paperboard after cutting are very good edge, this improves the appearance and quality of the paperboard. Make the paperboard easier for entering printer machine, and improves the quality of the carton. The design of this machine use pressing and pulling paperboard with double wheels, can change wheels base. This means the machines can press and slitting, also can pull paper in front and back, can slitting stably. This is perfect machines for manufacturers of cartons.

Function and Features:
1.Adopt front-scoring feeding, back double rubber roll leading paper, paperboard running steady
2. Slitting part: adopt high quality tungsten steel blade, sharp and long work-life, slice more tidy, non-pressing and non-burr.
3. Scoring part: adopt 5 points scoring, scoring distance in-phase adjust, blazonry and easy to bend the carton sheet.
4. Grinding part: adopt automatic and manual two kinds pneumatic grinding type, it could be grinding when working, improve work efficiency.

Technological Parameters:
Model MJBD-2-2000 MJBD-2-2200 MJBD-2-2400
Max paperboard size (mm) 1900 2100 2300
Max mechanical speed 100pcs/min 100pcs/min 100pcs/min
Blade knives 4 knives 4 knives 4 knives
Presslines 6 pairs 6 pairs 6 pairs
Min slitting width (mm) 130 130 130
Min pressing width (mm) 30 30 30
Outer diameter of the thin blade 220mm or 200mm 220mm or 200mm 220mm or 200mm
Thickness of the thin blade 1.2mm(steel), 1.4mm (alloy) 1.2mm(steel), 1.4mm (alloy) 1.2mm(steel), 1.4mm (alloy)
Power 4.0KW 4.0KW 4.0KW
Pneumatic pressure 0.4mpa 0.4mpa 0.4mpa
Machine size (mm) 2600x1600x1500 3000x1600x1500 3200x1600x1500
Machine Weight (kg) 1550 1950 2500
18000RMB 19000RMB 20000RMB
Note: For the Thin Blade, you can choose the quantity of knives and press lines. For the sizes, we can make as customer's requirement.

Introduction:
The Thin Blade (Paperboard slitting and pressing line machines) produced by our company is good appearance, good structure, with good design, easy to operation, easy to maintenance, and with competitive price.
The paperboard slitting and pressing machine use thin blade to cutting, the edge of the knives are very sharp, this makes the paperboard after cutting are very good edge, this improves the appearance and quality of the paperboard. Make the paperboard easier for entering printer machine, and improves the quality of the carton. The design of this machine use pressing and pulling paperboard with double wheels, can change wheels base. This means the machines can press and slitting, also can pull paper in front and back, can slitting stably. This is perfect machines for manufacturers of cartons.

Technological Parameters:
Model MJBD-1-1600
Max paperboard size (mm) 1600
Max. paperboard cutting width(mm) 1580
Design speed 100m/min
Running speed 80m/min
Blade knives 4 knives
Presslines 6 pairs
Min slitting width (mm) 130
Min pressing width (mm) 30
Outer diameter of the thin blade 220mm or 200mm
Thickness of the thin blade 1.2mm(steel), 1.4mm (alloy)
Power 4.5KW
Pneumatic pressure 0.4mpa
Machine size (mm) 2000x900x1500
Machine Weight (kg) 1650
Note: For both of above types Thin Blade, you can choose the quantity of knives and press lines. For the sizes, we can make as customer's requirement.