Model NO.: IRASOLAR-HE
FOB Price:US $ 6.00-15.00 / pieces
Min order:100 pieces
Accept Min order:Yes
Supply Ability:100000 pieces / Week
Country of Origin:China
Stock Time:20 Days
Main Parameters
Model: SY06-30UT
Tube Material: Copper(T2)/Stainless Stell
Output power: 1000W-3000W +5%, -10%
Voltage: 220V-240V/50Hz. 110V/60Hz
Hi-pot test: 1800V/S min cold condition
Leakage Current: 0.75ma max
Insulation: 500MΩ
Heating resistance wire: Ocr25AI5, Cr20NI80 or as custom's requirement
Sheath Diameter: 8mm-8.4mm
Hydraulic testing: 8.0KG
Total Length: 30cm
Flange: 1 1/4"brass flange with/without Mg anode holding M6/M8
Thermostat: With 16A 250V. L=275mm. Double safety thermostat.
Temperature Range: 20-80
Model NO.: IRA-MB
FOB Price:US $ 1.50-5.00 / pieces
Min order:100 pieces
Accept Min order:Yes
Supply Ability:1000000 pieces / Week
Country of Origin:China
Stock Time:20 Days
Specifications:
Magnesium Anode Water Heaters parts are excellent sacrificial rods, used to protect the inside metal surface of your water heater tank. The magnesium corrodes instead of your tank. The standard anodes can be used for all tank sizes and types (all brands) , are available optionally with a M4,M6,M8 bolt,etc. with a screw connection or adapter G ?, G1, G 1 ?, G 1 ?,etc.
Application:
Magnesium alloy extruded rods Anodes are mainly used in water heater, boiler, heat exchanger, water tank,etc.It has properties of softing water, de-dirt residual ,en-longing the working life of container.
Heat pipe pressurized solar water heater features
1.Adopts the best conduction performance metal- heat pipe (copper).
2.Can be used all year round in the cold climate.
3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly.
4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa.
5.No water in the tube, one tube broken don't influence the system working.
6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage.
7.Dual-purpose brackets for both flat and inclined roof.
8.The system is pressurized, it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out.
Pressurized solar water heater working principle
1.The pressurized solar water heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water. The hot water comes out because of water pressure.
2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot.
3.No water in the heat pipe makes the whole system could bear pressure.
Description: Flat panel solar water heater(IRA-FP-1)
Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel
Material of inner tank: Food grade 1.2 mm thickness SUS304 stainless steel
Tank insulating layer: 50mm thickness, 45kg/m³ high-density polyurethane foamed
Inlet and outlet hole: Female G 3/4
Max pressure: 0.6Mpa
Flat panel solar collector Dimension: 2000x1000x80mm
Absorber material: Selective balck chorme/Blue coating
Head pipe: Copper/Φ22x0.6
Branch pipe: Copper/Φ10x0.5
Quantity of Branch pipe: 7PCS
Welding: Laser welding
Cover: Low iron tempered textured glass
Frame: Anodised aluminium alloy
Insulation material: Rock wall
Bracket: 1.5mm thickness of galvanized steel material,25degree.
Structure of tank: 8 holes for PT valve,water inlet and outlet,electric heater,Mag Rod , Temp.Sensor.Heat exchange inlet and outlet
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 2m²
Temperature tolerance: from -5C to 250C
Tank capacity: 150L
Quality features, certificates:
High level of efficiency due to Sunselect coating on the absorber.
Low energy loss thanks to excellent thermal insulation.
Suitable for onâ??roof and flatâ??roof assembly Installation: vertical, side by side.
Robust aluminium frame for maximum durability.
Highly reliable with long useful life due to the use of high quality, corrosionâ??resistant materials. Glass covering made from low iron solar glass.
Easy to erect and install.
Model: IRA-HP58/1.8-12
Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel
Material of inner tank: Food grade 1.0 mm thickness SUS304 stainless steel
Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed
Inlet and outlet hole: Female G 3/4
Max pressure: 0.9Mpa
Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe
Thickness of glass tube: 1.6mm
Vacuum tube tightness: Pâ?¤0.005 Pa
Absorption: as=0.93-0.96(AM1.5)
Emission ratio: εh=0.04-0.06(80C±5C)
Idle sunning property parameters: Y=220~260m2.C/KW
Average heat loss coefficient: ULT=0.6~0.7W/(m2.C)
Bracket: 1.2mm thickness of galvanized steel material
Structure of tank: 6 holes for PT valve,water inlet and outlet,Mag Rod
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 1.874m2
Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total
Heat pipe material: TU1 copper
Heat pipe power: >120W/pcs
Temperature tolerance: from -35C to 250C
Tube quantity: 20 tubes
Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes
Tank capacity: 200L
Other Tank capacity: 80/100/120/150/180/200/240/300/360L
Model: IRA-HP58/1.8-24
Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel
Material of inner tank:Food grade 1.2 mm thickness SUS304 stainless steel
Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed
Inlet and outlet hole: Female G 3/4
Max pressure: 0.9Mpa
Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe
Thickness of glass tube: 1.6mm
Vacuum tube tightness: Pâ?¤0.005 Pa
Absorption: as=0.93-0.96(AM1.5)
Emission ratio: εh=0.04-0.06(80C±5C)
Idle sunning property parameters: Y=220~260m2.C/KW
Average heat loss coefficient: ULT=0.6~0.7W/(m2.C)
Bracket: 1.5mm thickness of galvanized steel material,45degree.
Structure of tank: 6 holes for PT valve,water inlet and outlet,electric heater,Mag Rod , Temp.Sensor.
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 2.249m2
Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total
Heat pipe material: TU1 copper
Heat pipe power: >120W/pcs
Temperature tolerance: from -35C to 250C
Tube quantity: 24 tubes
Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes
Tank capacity: 240L
Other Tank capacity: 80/100/120/150/180/200/240/300/360L
Model: IRA-HP58/1.8-OEM12
Color: Custom made
Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel
Material of inner tank: Food grade 1.0 mm thickness SUS304 stainless steel
Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed
Inlet and outlet hole: Female G 3/4
Max pressure: 0.9Mpa
Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe
Thickness of glass tube: 1.6mm
Vacuum tube tightness: P0.005 Pa
Absorption: as=0.93-0.96(AM1.5)
Emission ratio: µh=0.04-0.06(80C±5C)
Idle sunning property parameters: Y=220~260m2.C/KW
Average heat loss coefficient: ULT=0.6~0.7W/(m2.C)
Bracket: 1.0mm thickness of galvanized steel material
Structure of tank: 4 holes for PT valve,water inlet and outlet,Mag Rod
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 1.124m2
Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total
Heat pipe material: TU1 copper
Heat pipe power: >120W/pcs
Temperature tolerance: from -35C to 250C
Tube quantity: 12 tubes
Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes
Tank capacity: 150L
Other Tank capacity: 80/100/120/150/180/200/240/300/360L
Heat pipe pressurized solar water heater features:
1.Adopts the best conduction performance metal- heat pipe (copper).
2.Can be used all year round in the cold climate.
3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly.
4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa.
5.No water in the tube, one tube broken don't influence the system working.
6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage.
7.Dual-purpose brackets for both flat and inclined roof.
8.The system is pressurized, it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out.
Pressurized solar water heater working principle:
1.The pressurized solar water heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water. The hot water comes out because of water pressure.
2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot.
3.No water in the heat pipe makes the whole system could bear pressure.
Model: IRA-HP58/1.8-20
Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel
Material of inner tank: Food grade 1.0 mm thickness SUS304 stainless steel
Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed
Inlet and outlet hole: Female G 3/4
Max pressure: 0.9Mpa
Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe
Thickness of glass tube: 1.6mm
Vacuum tube tightness: P0.005 Pa
Absorption: as=0.93-0.96(AM1.5)
Emission ratio: µh=0.04-0.06(80C±5C)
Idle sunning property parameters: Y=220~260m2.C/KW
Average heat loss coefficient: ULT=0.6~0.7W/(m2.C)
Bracket: 1.2mm thickness of galvanized steel material
Structure of tank: 6 holes for PT valve,water inlet and outlet,Mag Rod
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 1.874m2
Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total
Heat pipe material: TU1 copper
Heat pipe power: >120W/pcs
Temperature tolerance: from -35C to 250C
Tube quantity: 20 tubes
Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes
Tank capacity: 200L
Other Tank capacity: 80/100/120/150/180/200/240/300/360L
Description: OEM Flat panel solar water heater
Color: Custom made
Size: 2mx1m
Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel
Material of inner tank: Food grade 1.2 mm thickness SUS304 stainless steel
Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed
Inlet and outlet hole: Female G 3/4
Max pressure: 0.6Mpa
Flat panel solar bcollector Dimension: 2000x1000x80mm
Absorber material: Selective balck chorme/Blue coating
Head pipe: Copper/Φ22x0.6
Branch pipe: Copper/Φ10x0.5
Quantity of Branch pipe: 7PCS
Welding: Laser welding
Cover: Low iron tempered textured glass
Frame: Anodised aluminium alloy
Insulation material: Rock wall
Bracket: 1.5mm thickness of galvanized steel material,25degree.
Structure of tank: 8 holes for PT valve,water inlet and outlet,electric heater,Mag Rod , Temp.Sensor.Heat exchange inlet and outlet
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 2m2
Temperature tolerance: from -5C to 250C
Tank capacity: 150L
Quality features, certificates
1.High level of efficiency due to Sunselect coating on the absorber.
2.Low energy loss thanks to excellent thermal insulation.
3.Suitable for on?roof and flat?roof assembly Installation: vertical, side by side.
4.Robust aluminium frame for maximum durability.
5.Highly reliable with long useful life due to the use of high quality, corrosion?resistant materials. Glass covering made from
6.low iron solar glass.
Absorb material: Aluminum alloy
Dimension: 2000*1000*80
Absorb coating: Black chrome/Blue Coating
Absorption rate: 0.95
Emission rate: 0.25
Cover glass: Tempered patterned glass
Edging materials and color: Aluminum alloy(black/Silver)
Insulation: Fiberglass(30mm)
Materials of back cover: Galvznized steel,Ï?=0.3mm
Sealing material: Special metal resilience seal,safty and lifetime are better than rubber seal
Solar collector working principle
Flat panel solar collectors working principle is different from evacuated tubes collector. A glazed flat-plate solar collector consists of a shallow rectangular box with a flat black plate behind a tempered glass cover. The plate is attached to a series of parallel tubes or one serpentine tube through which water or another liquid (such as an antifreeze solution) passes. Sunlight passes through the glazing and strikes the absorber plate, which heats up, changing sunshine into heat energy. The heat is transferred to liquid passing through pipes attached to the absorber plate. IRASOLAR can supply you different kinds of high quality absorber plate with selective film.
