Model: IRA-HP58/1.8-20
Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel
Material of inner tank: Food grade 1.0 mm thickness SUS304 stainless steel
Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed
Inlet and outlet hole: Female G 3/4
Max pressure: 0.9Mpa
Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe
Thickness of glass tube: 1.6mm
Vacuum tube tightness: P0.005 Pa
Absorption: as=0.93-0.96(AM1.5)
Emission ratio: µh=0.04-0.06(80C±5C)
Idle sunning property parameters: Y=220~260m2.C/KW
Average heat loss coefficient: ULT=0.6~0.7W/(m2.C)
Bracket: 1.2mm thickness of galvanized steel material
Structure of tank: 6 holes for PT valve,water inlet and outlet,Mag Rod
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 1.874m2
Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total
Heat pipe material: TU1 copper
Heat pipe power: >120W/pcs
Temperature tolerance: from -35C to 250C
Tube quantity: 20 tubes
Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes
Tank capacity: 200L
Other Tank capacity: 80/100/120/150/180/200/240/300/360L
Model: IRA-HP58/1.8-24
Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel
Material of inner tank:Food grade 1.2 mm thickness SUS304 stainless steel
Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed
Inlet and outlet hole: Female G 3/4
Max pressure: 0.9Mpa
Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe
Thickness of glass tube: 1.6mm
Vacuum tube tightness: Pâ?¤0.005 Pa
Absorption: as=0.93-0.96(AM1.5)
Emission ratio: εh=0.04-0.06(80C±5C)
Idle sunning property parameters: Y=220~260m2.C/KW
Average heat loss coefficient: ULT=0.6~0.7W/(m2.C)
Bracket: 1.5mm thickness of galvanized steel material,45degree.
Structure of tank: 6 holes for PT valve,water inlet and outlet,electric heater,Mag Rod , Temp.Sensor.
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 2.249m2
Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total
Heat pipe material: TU1 copper
Heat pipe power: >120W/pcs
Temperature tolerance: from -35C to 250C
Tube quantity: 24 tubes
Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes
Tank capacity: 240L
Other Tank capacity: 80/100/120/150/180/200/240/300/360L
Model: IRA-HP58/1.8-12
Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel
Material of inner tank: Food grade 1.0 mm thickness SUS304 stainless steel
Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed
Inlet and outlet hole: Female G 3/4
Max pressure: 0.9Mpa
Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe
Thickness of glass tube: 1.6mm
Vacuum tube tightness: Pâ?¤0.005 Pa
Absorption: as=0.93-0.96(AM1.5)
Emission ratio: εh=0.04-0.06(80C±5C)
Idle sunning property parameters: Y=220~260m2.C/KW
Average heat loss coefficient: ULT=0.6~0.7W/(m2.C)
Bracket: 1.2mm thickness of galvanized steel material
Structure of tank: 6 holes for PT valve,water inlet and outlet,Mag Rod
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 1.874m2
Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total
Heat pipe material: TU1 copper
Heat pipe power: >120W/pcs
Temperature tolerance: from -35C to 250C
Tube quantity: 20 tubes
Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes
Tank capacity: 200L
Other Tank capacity: 80/100/120/150/180/200/240/300/360L
1.Adopts the best conduction performance metal- heat pipe (copper).
2.Can be used all year round in the cold climate.
3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly.
4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa.
5.No water in the tube, one tube broken don't influence the system working.
6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage.
7.Dual-purpose brackets for both flat and inclined roof.
8.The system is pressurized, it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out.
Pressurized solar water heater working principle
1.The pressurized solar water heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water. The hot water comes out because of water pressure.
2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot.
3.No water in the heat pipe makes the whole system could bear pressure.
Model: IRA-HP58/1.8-OEM12
Color: Custom made
Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel
Material of inner tank: Food grade 1.0 mm thickness SUS304 stainless steel
Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed
Inlet and outlet hole: Female G 3/4
Max pressure: 0.9Mpa
Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe
Thickness of glass tube: 1.6mm
Vacuum tube tightness: P0.005 Pa
Absorption: as=0.93-0.96(AM1.5)
Emission ratio: µh=0.04-0.06(80C±5C)
Idle sunning property parameters: Y=220~260m2.C/KW
Average heat loss coefficient: ULT=0.6~0.7W/(m2.C)
Bracket: 1.0mm thickness of galvanized steel material
Structure of tank: 4 holes for PT valve,water inlet and outlet,Mag Rod
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 1.124m2
Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total
Heat pipe material: TU1 copper
Heat pipe power: >120W/pcs
Temperature tolerance: from -35C to 250C
Tube quantity: 12 tubes
Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes
Tank capacity: 150L
Other Tank capacity: 80/100/120/150/180/200/240/300/360L
Heat pipe pressurized solar water heater features:
1.Adopts the best conduction performance metal- heat pipe (copper).
2.Can be used all year round in the cold climate.
3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly.
4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa.
5.No water in the tube, one tube broken don't influence the system working.
6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage.
7.Dual-purpose brackets for both flat and inclined roof.
8.The system is pressurized, it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out.
Pressurized solar water heater working principle:
1.The pressurized solar water heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water. The hot water comes out because of water pressure.
2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot.
3.No water in the heat pipe makes the whole system could bear pressure.
Description: OEM Flat panel solar water heater
Color: Custom made
Size: 2mx1m
Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel
Material of inner tank: Food grade 1.2 mm thickness SUS304 stainless steel
Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed
Inlet and outlet hole: Female G 3/4
Max pressure: 0.6Mpa
Flat panel solar bcollector Dimension: 2000x1000x80mm
Absorber material: Selective balck chorme/Blue coating
Head pipe: Copper/Φ22x0.6
Branch pipe: Copper/Φ10x0.5
Quantity of Branch pipe: 7PCS
Welding: Laser welding
Cover: Low iron tempered textured glass
Frame: Anodised aluminium alloy
Insulation material: Rock wall
Bracket: 1.5mm thickness of galvanized steel material,25degree.
Structure of tank: 8 holes for PT valve,water inlet and outlet,electric heater,Mag Rod , Temp.Sensor.Heat exchange inlet and outlet
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 2m2
Temperature tolerance: from -5C to 250C
Tank capacity: 150L
Quality features, certificates
1.High level of efficiency due to Sunselect coating on the absorber.
2.Low energy loss thanks to excellent thermal insulation.
3.Suitable for on?roof and flat?roof assembly Installation: vertical, side by side.
4.Robust aluminium frame for maximum durability.
5.Highly reliable with long useful life due to the use of high quality, corrosion?resistant materials. Glass covering made from
6.low iron solar glass.
Bracket: 1.5mm thickness of galvanized steel material,25degree.
Structure of tank: 8 holes for PT valve,water inlet and outlet,electric heater,Mag Rod , Temp.Sensor.Heat exchange inlet and outlet
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 2m²
Temperature tolerance: from -5C to 250C
Tank capacity: 150L
Quality features, certificates:
High level of efficiency due to Sunselect coating on the absorber.
Low energy loss thanks to excellent thermal insulation.
Suitable for onâ??roof and flatâ??roof assembly Installation: vertical, side by side.
Robust aluminium frame for maximum durability.
Highly reliable with long useful life due to the use of high quality, corrosionâ??resistant materials. Glass covering made from low iron solar glass.
Easy to erect and install.
Plug & Play: E.FOR.U 800 Watt Solar Balcony Power Plant is the perfect solution for anyone who wants to generate electricity in an environmentally friendly and sustainable way. It is easy to install and can be connected in a few minutes.
Solar panels: The solar panels have a total output of 800W (2x400W) and come with a 12-year product warranty and a 25-year performance warranty. Thanks to the 210mm PERC cells, the module efficiency is 20.81%. You can generate a lot of green electricity if you set up the system in a sunny location.
Inverter: The Deye inverter has a peak power of 600W. You can save up to â?¬327.60 annually on electricity costs. The product has a warranty of 10 years.
Smart monitoring: Through the inverter's WiFi function, you can use the SOLARMAN APP to intelligently monitor and record your system. This gives you real-time information about the amount of electricity generated.
German company: We are a local company in Germany and deliver by freight forwarder with a fast shipping of 3-5 days. Our experienced staff will be happy to advise you before and after your purchase and will be available to answer any questions you may have.
