JQHSB-50Ã?12 double-braking air winch is a kind of manual operated single drum type air winch. It adopts compressed air as its power to drive air motor to drive air motor, driving drum via two grades gears ( to reduce transmitting speed and enlarge torque) so as to lift and drag heavy cargo. Considering security, this winch is specially designed with hand brake and foot brake. This winch is widely used for drilling, marines, minings, engineering sites, etc to pull heavy cargo.
Features:
1. Small in size, light in weight, high in mobility.
2. Variable speed control, flexible to perform clockwise and anti-clockwise rotation.
3. High practicability with anti-explosive function, especially stable and reliable in inflammable, explosive, wet, damp, and other extremely working environments.
4. High starting torque enables start with load.
5. Anti-overload function.
Drawworks Parts:
Air Valves, Brake Bands, Brake Blocks, Brake Flanges, Brake Hardware, Bushings, Catheads (Makeup / Breakout), Cathead Parts, Chains, Clutches, Clutch Friction Linings, Clutch Air Diaphragmâ?? s, Drum Assembly.
-
Drawworks Parts:
Air Valves, Brake Bands, Brake Blocks, Brake Flanges, Brake Hardware, Bushings, Catheads (Makeup / Breakout), Cathead Parts, Chains, Clutches, Clutch Friction Linings, Clutch Air Diaphragm s, Drum Assembly.
Parts we carry fit:
National, Oilwell, Cooper, Cardwell, Skytop, Brewster, Crane Carrier, Franks Cabot and Ideco. Please keep us in mind for all of your drawworks parts requirements.
WIRELINE FLOW TUBES are critical components of the GreaseInjection Control Head. It is absolutely essential that WIRELINE FLOW TUBE Sarechanged frequently in order to properly contain well pressure as the wireline is raisedand lowered into the well bore.We offer a full range of WIRELINE FLOW TUBES at very attractive prices.We invite your direct requests and assure you of our best prices and delivery anywherein the world to meet your requirements.
Tubes with a diameter slightly larger than the braded wireline or slick line that are used in the â??stuffing boxâ?? on a wireline intervention to isolate the well pressure and fluid from the atmosphere. They work in combination with oil or wireline grease injection to form a hydraulic seal.
It is absolutely essential that WIRELINE FLOW TUBES arechanged frequently in order to properly contain well pressure as the wireline is raisedand lowered into the well bore.
Drawworks Parts:
Air Valves, Brake Bands, Brake Blocks, Brake Flanges, Brake Hardware, Bushings, Catheads (Makeup / Breakout), Cathead Parts, Chains, Clutches, Clutch Friction Linings, Clutch Air Diaphragm s, Drum Assembly.
Parts we carry fit:
National, Oilwell, Cooper, Cardwell, Skytop, Brewster, Crane Carrier, Franks Cabot and Ideco. Please keep us in mind for all of your drawworks parts requirements.
Drawworks Parts:
Air Valves, Brake Bands, Brake Blocks, Brake Flanges, Brake Hardware, Bushings, Catheads (Makeup / Breakout), Cathead Parts, Chains, Clutches, Clutch Friction Linings, Clutch Air Diaphragm s, Drum Assembly.
Parts we carry fit:
National, Oilwell, Cooper, Cardwell, Skytop, Brewster, Crane Carrier, Franks Cabot and Ideco. Please keep us in mind for all of your drawworks parts requirements.
Pipeline system inflatable air grip union
Seal o grip union air o union are air inflatable connections for low pressure fluid or mud suction and return lines. The seal o grip carbon steel body welds in place on mud tanks or manifold pipe. A leak-right seal is achieved with rig supplied compressed air, even if the connecting pipe is not perfectly aligned. The oil and abrasion resistant NBR pneumatic o tube can be inflated up to 200 PSI against the outside diameter of the connecting pipe, speeding field set up and eliminating the need for low pressure flanged connections.
Features
Low requirement to centered when installed, to achieve quick install and seal.
The pipeline can be removed without other tools after pneumatic union deflated, adaptable and easy maintenance.
No wrenches, bolts & nuts required.
Fast and easy make up without close alignment.
Pneumatic Tube inflatable up to 200 PSI.
Quick Details:
Type:Drilling Mud Pump
Product name:eccentric bearing for Bomco F500/800/1000/1300/1600 pump
Usage:mud pump
Application:oil field
Advantage:high quality and competitive price
Place of Origin:China (Mainland)
Certification:API
model:92984QU 928/508QU 929/558.8QU 928/660.4QU 929/660.4QU
Outside Diameter:558.8-1060mm
Inner diameter:419.1-800mm
Supply Ability:
Supply Ability:500 Set/Sets per Month
Packaging & Delivery:
Packaging Details:Standard export packages
Port:Shanghai
Lead Time :according to your request
Quick Details
Type:Drilling Mud Pump
Product name:eccentric bearing for Bomco F500/800/1000/1300/1600 pump
Usage:mud pump
Application:oil field
Advantage:high quality and competitive price
Place of Origin:China (Mainland)
Certification:API
model:92984QU 928/508QU 929/558.8QU 928/660.4QU 929/660.4QU
Outside Diameter:558.8-1060mm
Inner diameter:419.1-800mm
Supply Ability
Supply Ability:500 Set/Sets per Month
Packaging & Delivery
Packaging Details:Standard export packages
Port:Shanghai
Lead Time :according to your request
Product Description:
1. Material : alloy steel
2. Grade: ASTM A194 2H , ASTM A193 B7
3. Size: M3 - M48
4. Standard: A194 ,A193
5. Certification: ISO9001, SGS, CTI .
Q series Pipe Threading Lath/ good price pipe threading lathe machine. mainly used for processing inner and outer pipe thread, metric thread and inch thread, and can also undertake various turning works such as turning innner and outer cylindrical surface, conical surface and revolution and end surface as general lathes.
-
Safety Clamps Type MP are necessary tools for handling drill collars, flush joint pipes and small shoulder pipes. They could adjust pipes of different sizes by changing the quantity of chain links. They are designed and manufactured according to API 7K.
Satety clamps type C and Type T are necessary tools for handling flush joint pipe and drill collar , They can accommodate pipes from 1 /1/8 to 15 5/8 inch. they are designed and manufactured according to API 7K Specification for drilling and well servicing equipment.
Satety clamps type MP are necessary tools for handling flush joint pipe and drill collar and small shoulder pipes, they could adjust pipes of different sizes by changing the quantity of chain links. they are designed and manufactured according to API 7K Specification for drilling and well servicing equipment.
Specifications
1.liner hanger body
2.setting tool
3.packoff busher
4.landing collar
1,Mechanical liner hanger is applicable to different wells,especially to deep wells.
2,With two different setting mechanisms, the SSX-A can set easily.
3,Working with SQ setting-ball carrier, the SSX-A is suitable for applications in horizontal or highly-deviated wells.
4,The piston sealing element is made of nitrile/fluorine rubber for higher pressure and temperature ratings.
5,Main parts are fabricated with high-strength alloy steel providing high burst/collapse resistance.
Lifting cap is a special tool for lifting of drilling tools in petroleum, natural gas, drilling engineering and geographical exploration.
lifting cap is a special tool for lifting of drilling tools in petroleum, natural gas, drilling engineering and geographical exploration.
lifting cap is a special tool for lifting of drilling tools in petroleum, natural gas, drilling engineering and geographical exploration.
API Standard lifting plug Technical parameter forlifting cap
The dies and Jaws are made of high-quality alloy steel in SAPWELLS.
They are chemically heart-treated for surface hardness.
They are wear-resisting and corrosion-resisting and they have a long service life.
We can also design and manufacture special inserts according to customer's requirement.
Inserts and Dies can be designed according to the customer's requirement .
The dies and Jaws are made of high-quality alloy steel in SAPWELLS.
They are chemically heart-treated for surface hardness.
They are wear-resisting and corrosion-resisting and they have a long service life.
We can also design and manufacture special inserts according to customer's requirement.
Inserts and Dies can be designed according to the customer's requirement .
XSL Swivel with spinner is a combination of swivel and kelly spinner, driven by air motor or hydraulic motor, with keyless connection adopted between spinner and central pipe of swivel. It is designed and manufactured according to API Spec 8C Specification for Drilling and Production Hoisting Equipmentâ?�
SL Swivel with spinner is a combination of swivel and kelly spinner, driven by air motor or hydraulic motor, with keyless connection adopted between spinner and central pipe of swivel. It is designed and manufactured according to API Spec 8C Specification for Drilling and Production Hoisting Equipmentâ?�
Brief Introduce:
Certificate: API 5DP, API Q1, ISO 9001, ISO 29001
Size Range: 60.32-168.28mm
OD: 2 3/8â?�, 2 7/8â?�, 3 1/2â?�, 4â?�, 4 1/2â?�, 5â?�, 5 1/2â?�, 6 5/8â?�
Grade: G105, S135, X95, E75
Wall Thickness: (0.25-0.50) inch or (6.45-12.70) mm
Length: R1: 6.10-7.01m; R2: 8.84-9.75m; R3: 12.19-13.72m
Upset style: IU, EU, IEU
Products Features:
High quality raw material and advanced heat treatment make the products higher hardness and toughness. Especially it has higher low temperature toughness.
Smoother and longer upset taper length and high performance pipe extends the drill pipes service life.
Meet or exceed API SPEC 5DP, API SPEC 7-2, and API RP 7G requirement.
dopt complete advanced testing method and strict quality control to ensure the high quality and stable performance products.
Holding advanced technology, high end product R&D capabilities and senior technical workers, we can provide customers special requirement products.
Pff gear operated two way gate valve:
According to the customer's request and the need of oil production, on basic of the pff slab gate valve, we have a new design in accordance with the api 6a specification strictly and then manufacture pff gear operated two way gate valve which with a lower indicator.
Size: 2-1/16", 3-1/8", 3-1/16", 4-1/16", 5-1/8", 7-1/16"
Wp:2000-15, 000psi
Working temperature:l u, pu
Material:aa-ff psl:1-4 pr:1-2
Pff gear operated two way gate valve:
According to the customer's request and the need of oil production, on basic of the pff slab gate valve, we have a new design in accordance with the api 6a specification strictly and then manufacture pff gear operated two way gate valve which with a lower indicator.
Size: 2-1/16", 3-1/8", 3-1/16", 4-1/16", 5-1/8", 7-1/16"
Wp:2000-15, 000psi
Working temperature:l u, pu
Material:aa-ff psl:1-4 pr:1-2
Slip Type Elevators/Spiders are mechanized tools with air operating. They can handle casings up to 24.1/2inch. They are easy to operate and dependable enough. Also they can reduce workload. They are designed and manufactured according to API Spec 8A/8C.
Lake's friction have 42mm, 45mm, 48mm etc, which can make up and break up tools easily and conveniently based on very competitie price
Dsl power swivel is the device installing on the derrick of servicing rig, to provide rotating power. Except the use for such work over jobs as casing milling, milling, drilling cement plug and bridge plug and fishing, it is also used for sidetracking drilling, drilling open hole and coring. The product is designed and manufactured according to api 8c specifications.
Advantage:
1. Various drive modes includingdiesel engine +hydraulic coupling transmission + chain compound��diesel engine +reducing gear box +narrow v belt compoundre available for option. The power is reasonable distributed for higher efficiency.
2. Either inner or outer speed change is optional for drawworks. Speed change is easy and fast by rrmote pneumatic contro. Main brake is either band brake or hydraulic disc brake. Electric magnitic eddy current brake for auxiliary brake.
3. For drilling rig over 4000mm in drilling depth, rig floor id in two levels which is front high rear lowerâ?�power and tansmission system are installed on the rear low level and the rig power is transimitted to drive rotary table and cat worka located on drill floor through bevel gear reducer and universal shaft.
4. Modul designed, advanced techology, easy for assembly and disassembly.
5. With bailing drum, mechanical friction cathead and rotary table drive device.
6. Independent driller cabin is on the users requirements. To realize intelligent contral of pneumatic, electric, hydraumatic and instrument system so that driller completes the total operation in the cabin.
7. Independent wutomatic drillin system could be equipped as the client requirment.
8. Top drive drilling system could bu supplied.
Description:
Shear pin safety valve is used at the discharge part of the mud pump.Ja-3 shear pin safety valve changes the discharging pressure by changing the position of the shear pin , which is operation easy and work reliable.
Features:
1. Opening and shutting neatly.
2. Piston's bearing pressure area is small.
3. To reposition simply.
4. Safety valve may use for multifold mud pumps.
5. Flange / screw thread connection
6. Max pressure:35mpa
Rod bop to prevent the leakage of oil and gas in the recovery operation control device, can guarantee the well-flushing, sand washing, fracturing downhole operation smoothly. By changing different valve core, and can meet the needs of all kinds of rod seal. Product design is reasonable, simple structure, convenient operation, reliable sealing, long service life and is one of indispensable tools in oil field work.
Summary:
The sb family of pumps is designed and engineered to handle abrasive, viscous and corrosive fluids in drilling fluid or industrial slurry applications. The pump performance is matched by exceptional performance, high volume, high temperature capabilities, long service life, ease to maintenance, overall economy and greater savings. Sb centrifugal pumps are currently in operation on land-based and offshore drilling rigs around the world. We will offer the best choice for the intended application, taking into consideration fluid conditions.
Applications:
Drilling applications:
Mud mixing and shearing operations, desanding and desilting, degassing, supercharging, centrifugal feed, mud cooling towers, wash down.
Others
Chemical, refinery, industrial, construction and agricultural applications.
Working conditions:
(outlet):dn=26
(flow):q=20~400m3/h
(head):h=12~62m
(working temperature):t=-40~60
Explanation of model:
Sb 65 ?11
Impeller dia(inches)
Pump outlet dia(inches)
Pump inlet dia(inches)
Sand pump
Drift is a simple and popular tool for drifting id of casing, tubing, drill pipe and other pipes. It is used to check whether inside diameter of all kinds of pipes are complied with standard, and to determine the max. Inside diameter to be drifted after deformed. The drift is thus granted as necessary tool in workover operation.
The product is installed at the center of api tubings. Ideal for the protection of any size esp cables, control lines and chemical injection lines etc., it provides a safe and quick way of conveying and securing downhole cables into well-bores.
Features:
All cable protectors have double protection to resist corrosion
All hinges are spot-welded to enhance the overall integrity of the product
Spring friction pad gripping system for superior grip
Slip and rotation resistant
Non-destructive gripping action
Designed to eliminate compression-reduced damages to the conductors
Specifications:
Manufactured of low carbon steel or stainless steel
Available as cross-coupling and mid-joint protectors
Suitable for api tubing sizes from 2 3/8" to 7"
Configured for flat, round or square cables, chemical injection lines, umbilicals etc.
Multichannel designis available to separate multiple lines
Customized upon request
Description:
F1600 pump unit is used for transporting high viscosity, large proportion, higher sediment concentration
Drilling fluid to the well bottom in high pressure, for cooling the bit, wash the bottom, break the rock, and
Carry out rock cutting when return from the well bottom. It is one the main process equipment of oil drilling
Operation.
F1600 electric pump unit is consist of mud pump, dc motor, small base, big base, belt transmission system, spray system, pressure relief manifold and charging system etc. Dc motor is installed on independent skid, and fixed integrally on the big base behind the f1600 pump. Motor power is transmitted to mud pump from input shaft by belt, then drive the mud pump. Small base is equipped with a regulating screw, which can adjust the elasticity of belt. The matching electric spray pump is used to cool hydraulic end piston, cylinder liner, thus to make sure they work properly.
Api standard
F1600 pump unit meets the requirements of api 7k drilling and wellhead equipment
Operation specifications and sy/ t5138 standards.
Product description:
We can produce all types of drilling rods such as hdd drilling rods, oil drilling rods, geological drilling rods, anchoring drilling rods and other special drilling rods, and trenchless special drilling tools such as pilot guide bits, swivels, ream bits, reducer unions, pneumatic pipe-rammer.
Technical parameter:
Od of machine(mm): 260/190
Length of machine(mm): 1390
Weight(kg): 320
Air consumption(m3/min): 3~8
Pressure of air(mpa): 0.4~0.7
Diameter of pipe laying(mm): 273\325\426
Safety clamps are tools for handling flush joint pipe and drill collar.
There are two kinds of model of safety clamps: wa-c safety clamps can accommodate pipe from 3 1/2~15 5/8 in (88.9-396.9mm)
O.D.. Model wa-t safety clamps can accommodate pipe from 1 1/8~4 1/2 in (28.6-114.3mm) o.D.
Product Description:
1. Bit Breakers
The Bit Breakers are suitable to make up or break out the drilling bit during the oil well drilling and repairing operations. The Users should be chosen the bit breaker according to the size and model of the drilling bit.
Feature:Improve support and retention
Advantage:Manage the magnitude cutter loading and bit torque
Benefit:Improved bit durability and directional responsiveness
Advantage:Higher nozzle counts and/or fixed ports to best serve cleaning,cooling and cuttings evacuation requirements with available hydraulic flows.Allow for higher flow rates with minimal increase in pump pressure.
2. Detailed introduction to Bit breaker
1) Bit breaker is mainly used to screw on or off a rock bit to the bottom of drill string.
2) It can also prevent the rock bit from dropping into well hole.
3) The price of it is cheap and the use of it is safety and reliable.
4) It is easy to operate. First, the bit breaker is placed on well hole and then put the rock bit onto it. Turn it to screw on or off the bit by turnplate.
Product Description
Lake series mud agitator is part of the drilling fluids solids control equipment, which is mainly used to agitate and mix the drilling mud to prevent solids particles from depositing in the circulating tank and to stabilize the performance of drilling fluids.
It is composed of explosion-proof motor, speed reducer, motor base and blade. The motor and speed reducer, speed reducer and impeller shaft are connected by steel coupling. The impeller is welded with four blades.
It can be used used for solid-phase separation in drilling fluid circulating system.
Features:
(1). Hellical-bevel gearbox.
(2). Explosion-proof electric motor.
(3). Able to process 20 ppg drilling fluids.
(4). Power available ranging from 2.2 to 22 Kw.
(5). Compact, quiet, smooth and easy to maintain.
(6). Durable, single reduction worm gear drive.
(7). Fewer moving parts, less maintenance.
(8). Compact design without coupling, IEC top brand gear box.
(9). C-Face Explosion proof electrical motor direct coonnection with gear box, ATEX, IEC Ex, and Marine.
Company Information
Drilling Mud Agitator for Solid Control SystemLake Petro has been focusing on the oil and gas equipment supply more than 9 years. We always consider to support the customer economic cost, stable quality and comforable service.
FAQ
How can I place order?
A: You can contact us by email about your order details, or place order on line.
How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (HSBC bank), Western Union are the most usual ways we are using.
What isthe order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15days if we donâ??t have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
Descriptions of Ram BOP Variable Ram Assembly:
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable.
BOP part name: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
Apply to below BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type:Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Working pressure:2000psi-15000psi(14 Mpa-105Mpa)
Operating temperature:-18deg--121deg
Bore size:7 1/16"-21 1/4"
Top & nottom connection:Flanged,studded
We supply slick drill collars, spiral drill collars and non-magnetic drill collars; their sizes are from 3-1/8 to 11 inches. Besides the drill collars in the table below, we can supply other drill collars at customers' request.
-
1.Cutting structure this type TCI tricone bits:
The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit.
2.Gauge structure this type TCI tricone bits:
Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
3.Bearing structure of this type TCI tricone bits:
High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved.
4.Seal and Lubrication of this type TCI tricone bits:
Premium Oring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability .
5.Product Application this type TCI tricone bits:
It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height.
6.Advantage:
1. High-strength, high flexibility, high temperature and high wear resistance.
2. High-precision metal seal.
3. Locking roller ball, to adapt to high-speed.
4. The use of high strength high toughness carbide teeth,
5. Hours in the rotary cone bit with the impact, crushing and shearing the role of broken rock.
6. Cone bit to adapt to the soft, medium and hard of various strata.
7. Reasonable price and long working life.
-
1. PDC Matrix Body bit
Type and feature
PDC bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
Bit Diameters: 5 7/8",6",6 1/2",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4",etc.Body type: Matrix or Steel Cutter Sizes:5/16"(8mm),1/2"(13mm),5/8"(16mm),3/4"(19mm),etc. Blades:2~9 Wings.
2. PDC Matrix Body Core Bit
Type and feature
PDC core bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
75/54mm,94/74mm,113/89mm,113/109mm,153/129mm,215/105mm,etc.
3. PDC Steel Body Bit
Type and feature
PDC bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
Bit Diameters: 5 7/8",6",6 1/2",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4", etc. Body Type: Matrix or Steel Cutter Sizes:5/16"(8mm),1/2"(13mm),5/8"(16mm),3/4"(19mm),etc. Blades:2~9 Wings
4.PDC Drill Bit Body & Cutters Welding
PDC body(matrix)
Customized. Wings: 2~9. Main Diamters:65mm,75mm,94mm,113mm,133mm,152mm,215.9mm,311.1mm etc.
2.PDC body(steel)
Customized. Wings: 2~9. Main Diamters:65mm,75mm,94mm,113mm,133mm,152mm,215.9mm,311.1mm etc.
Core bit body(matrix or steel)
Main Type:75/54,94/74,113/89,113/109,153/129mm,110/215.9mm, etc.
4.PDC cutter and Welding OEM
PDC Cutters Type : 5/16"(8mm), 1/2"(13mm), 5/8"(16mm), 3/4"(19mm).
-
Description:
The HDD drill rod has four different specifications for customer's choice: 50, 60, 73 and 89. And the length of drill rods and connection threads can be made totally according to specific requirements of clients. The normal length of our HDD drill rods is 3m.
Regarding its packaging, slotted steel frameworks are utilized to pack HDD drill rods in the forms of bundle, and each bundle has 20 to 50 drill rods.
Features of HDD Drill Rods:
1.Pipe end upsetting technology, self connecting mode and heat treatment have been used in the manufacture of this kind of HDD drill rod. Thus, our drill rods in different specifications possess excellent mechanical properties.
2.Double-step structure is used for its male and female threads, so this kind of drill rod has optimal sealing property and after torsion, there is little transformation in the rod.
3.Chemical plating (electroless plating) is used on the surfaces of threads so as to improve the hardness of surface and abrasive resistance of thread.
4.Our HDD drill rods can work together with various horizontal directional drill rigs within and beyond China.
Pilot/ Sonde Housing (2 3/8"~6 5/8" FH)
Connection: Direct connection with drill pipe, Octagonal connection, Side-opening
Octagonal connection back-load transmitter housing
Standard connection side -load transmitter housing
Choose the suitable drill bit based on different soil condition to improve construction efficiency.
Good wearing, connviences to demount and maintain. Available for all makes (XCMG, Ditch Witch, Vermeer, Astec, others) and bolt hole patterns. 3.5", 4", 4.5" and 5" cut.
Sonde Housings with a variety of thread configurations. Our Side-Load Housings are manufactured from American-Made 4140 Alloy. Our Heat Treatment Process and optional Hard Facing give you the wearability you can count on. They are offered for Duck Bill or Carbide Bits.
All of our sonde housings are machined from heat treated 4140 Alloy for superior strength and durability.Side load feature provides for quick installation and removal of transmitter sonde and batteries.Hex-style connection on the 2-3/4" and 3" models provides for quick disconnect from the drillstem.
-
Size: 200-2000mm
Suitable for soft soil, hard soil and strong-mantle rock, sand and medium-to-very hard soil.
Connection with drill rod: Direct connection with drill rod
Octagonal connection
Connection with laid pipe: Within or without swivel
-
We supply slick drill collars, spiral drill collars and non-magnetic drill collars; their sizes are from 3-1/8 to 11 inches. Besides the drill collars in the table below, we can supply other drill collars at customers' request.
Materials:
Drill collars are manufactured from AISI 4145H modified steel, and are supplied in the "as rolled" surface finish condition. Alternative surface finishes are available.
Trepanning and Heat Treatment:
Drill collars are trepanned and drifted to API Spec 7-1. Full-length heat-treatment processes ensure that mechanical properties meet or exceed API Spec 7-1 requirements. A hardness range of 285-341, Brinell hardness and Charpy "V" notch minimum impact strength of 40 ft-lb at 70 F are guaranteed one inch below the surface.
Traceability:
Drill collar material and process traceability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies.
Rigid Inspection Procedures:
We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar.
Cold Rolling:
Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation.
Phosphate-coated or Copper Plating:
All connections are phosphate-coated or copper plated to improve resistance to corrosion.
Slip Groove, Elevator Groove and Size:
Lake offers optional slip and elevator recesses to improve handling efficiency and safety. Unless otherwise specified, slip and elevator recesses are machined in compliance with API spec 7-1 guidelines.
Thread Protectors:
Our company offers steel, cast steel and plastic steel thread protectors for its drill stem products.
Specifications:
They are designed and manufactured according to API Spec 7K.
Manual Tongs are necessary tools applied to make up and break out pipes. Changing lug jaws and latch steps can adjust different handling sizes of pipes. They are designed and manufactured according to API Spec 7K.
Product Main Material
Steel,HDPE
Quality Control
Follow the API Q1 quality inspectionstandard. Base on the API 5CT Annex I when design the product.
Applications
Products are the required parts for oildrill pipes and drill color that can protect the thread of each side of pipe.Mainly Thread protectors can prevent your connector threads and pipe end fromdamaging during handling, transportation and storage.
Pilot/ Sonde Housing (2 3/8"~6 5/8" FH)
Connection: Direct connection with drill pipe, Octagonal connection, Side-opening
Octagonal connection back-load transmitter housing
Standard connection side -load transmitter housing
Choose the suitable drill bit based on different soil condition to improve construction efficiency.
Good wearing, connviences to demount and maintain. Available for all makes (XCMG, Ditch Witch, Vermeer, Astec, others) and bolt hole patterns. 3.5", 4", 4.5" and 5" cut.
Sonde Housings with a variety of thread configurations. Our Side-Load Housings are manufactured from American-Made 4140 Alloy. Our Heat Treatment Process and optional Hard Facing give you the wearability you can count on. They are offered for Duck Bill or Carbide Bits.
All of our sonde housings are machined from heat treated 4140 Alloy for superior strength and durability.Side load feature provides for quick installation and removal of transmitter sonde and batteries.Hex-style connection on the 2-3/4" and 3" models provides for quick disconnect from the drillstem.
1.Cutting structure this type tci tricone bits:
The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit.
2.Gauge structure this type tci tricone bits:
Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
3.Bearing structure of this type tci tricone bits:
High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved.
4.Seal and lubrication of this type tci tricone bits:
Premium oring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability .
5.Product application this type tci tricone bits:
It can receive high wob in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height.
6.Advantage:
1. High-strength, high flexibility, high temperature and high wear resistance.
2. High-precision metal seal.
3. Locking roller ball, to adapt to high-speed.
4. The use of high strength high toughness carbide teeth,
5. Hours in the rotary cone bit with the impact, crushing and shearing the role of broken rock.
6. Cone bit to adapt to the soft, medium and hard of various strata.
7. Reasonable price and long working life.
General Instruction:
We offer a complete line of single & double and triple tube core barrels, which willl provide superior performance and obtain the full recovery of the sample in any application of diamond core drilling.
Using a wireline system, core is recovered quickly by retrieving the inner tube directly through the drill string. The rods remin in the hole until the bit needs to be replaced. This has big cost advantages when drilling deep holes for mineral exploration.
The core barrel assembly is composed of the inner-tube group and outer-tube group.
Advantages:
1.Faster coring at greater depths
2.Good stability due to constant diameter of the drill string
3.excellent hydraulics
4.Good core recovery
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable.
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
APPLY TO BELOW BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Technical parameter
Specification:
1. Standad: API 16 A and ISO 9001
2. Rated Pressure: 2000Psi to 15000Psi(14-17 Mpa)
3. Size: Nominal Bore: 7-1/16" to 21-1/4" (179.4mm to 539.75mm)
4. Type: Shear Ram/ Pipe Ram/ Variable Bore Ram
5. Usage : Single Ram BOP/ Double Ram BOP/ Three Ram BOP
6.Brand:Shenkai and Rongsheng.
7.Imitate: Camaron and Shaffer
8.U type and SH type
Characters of BOP pare parts:
In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks.
Blowout preventer with spherical plastic core and dust-proof ring.
Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use.
Working of BOP pare parts:
When wells must be sealed in case of kicks high pressure (10.5Mpa) oil from control systems enters into close-cavity under piston from housing oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer to each other to moce the rubber between them to the center of wellhead so as to seal drilling tools or fully seal wellhead. In opening , hydraulic pressure oul enters into open-cavity above piston from housing oul inlet, to push piston moving downwards , so that plastic will reset with its own elasticity, wellhead will be open.
Our company manufactures Wireline Drill Rods, BQ, NQ, HQ, PQ, PHD, Parallel Threaded Drill Rods, DCDMA Sizes AW, BW, NW, HW, and Metric sizes 42 mm, 50 mm, 60 mm to 90mm.
Note:
1. Thread oil should be used when screwing the drill rod and hammer knocking should be prohibited.
2. The drill rod stand should have buffer materials, like wood, rubber, and more. The contact between the threaded ends and iron tools should be forbidden.
3. During the relocation of drill rod, the thread protector should be screwed on the threaded parts so as to protect it from damages.
-
Drift is a simple and general tool designed to measure inside size of casing, tubing, drill pipe and other pipes.
Our Services:
1.High quality products with favorable price at right delivery.
2.Customized products.
3.Warranty.
4. When enquiry, please kindly advise below:
Size: drift size & casing (tubing) spec if necessary
Material: metal/ nylon or something else
Quantity
Port of destination if you need CNF or CIF price
Your ideal delivery date if you need the goods urgently
-
We supply slick drill collars, spiral drill collars and non-magnetic drill collars; their sizes are from 3-1/8 to 11 inches. Besides the drill collars in the table below, we can supply other drill collars at customers' request.
Materials:
Drill collars are manufactured from AISI 4145H modified steel, and are supplied in the "as rolled" surface finish condition. Alternative surface finishes are available.
Trepanning and Heat Treatment:
Drill collars are trepanned and drifted to API Spec 7-1. Full-length heat-treatment processes ensure that mechanical properties meet or exceed API Spec 7-1 requirements. A hardness range of 285-341, Brinell hardness and Charpy "V" notch minimum impact strength of 40 ft-lb at 70 F are guaranteed one inch below the surface.
Traceability:
Drill collar material and process traceability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies.
Rigid Inspection Procedures:
We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar.
Cold Rolling:
Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation.
Phosphate-coated or Copper Plating:
All connections are phosphate-coated or copper plated to improve resistance to corrosion.
Slip Groove, Elevator Groove and Size:
Lake offers optional slip and elevator recesses to improve handling efficiency and safety. Unless otherwise specified, slip and elevator recesses are machined in compliance with API spec 7-1 guidelines.
Thread Protectors:
Our company offers steel, cast steel and plastic steel thread protectors for its drill stem products.
1.Cutter Structure
The durability of premiun Tungsten carbide inserts is improved with new formulas and new techniques
2.Gauge Structure
Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inders and hardfacing on the shirttail increases gauge holding capacity and bearing life.
3.Bearing Structure
High Precision jourmal bearing with two thrust faces. Balls lock the cone. hardfaced head bearing surface. cone bearing inlaid with friction-reduceing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved,and suitable for high rotary speed.
4.Seal and Lubracation
Advance metal face seal lowers seal frictional force and overall seal torque and improves seal life. the pressure compensator syste, and advanced grease can greatly increas the lubracating relaibility.
5.Six-Point Position stabilzation Structure
The bit leg is designed with specific interated stability structure, which provides near six-point contact with borehole wall for the bie. this new feature gives the bit unequaled stability which greatly reduces bit vibration protects the cutting structure from damageding blows and keeps good borehole quality, the thickened nozzle wall can protecy hydraulic system from wear and fluid erosion.
6. Product Application
It is suitable for downhole motor and high speed applications, and is the ideal selection for drilling directional and horizontal wells;
Lake Petro supplies forged and casted steel pulsation dampeners which are inter-changeable and compatible with:
Hydril series "K" dampeners
Emsco series "PD" dampeners
Bomco series "KB" dampeners
These units are dependable and reliable with API connections
K-10,3000 psi, K-10,5000 psi, K-20, 5000 psi, K-20, 7500 psi, KB-45, 5000 psi, KB-75, 5000 psi, PD-45, 5000 psi, PD-55, 5000 psi
Integral blade stabilizer is an important tool in the drilling engineering to control the well deviation. It can stabilize the drilling tools in the drilling process of oil, gas and geological exploration. It can increase the bit life, drilling speed and well bore quality. There are two kinds of integral stabilizers: spiral integral blade stabilizer and straight integral blade stabilizer
Hardfacing type: HF1000, HF2000, HF3000, HF4000
Drilling Jar Type BZ is full mechanical type drilling jar and releasing stuck tool. The Drilling Jar integrates the upward jarring with the downward jarring so that it can release from the tight pull or the sticking etc. during drilling. The load(jarring force)scope of the upward jarring and the downward jarring is so wide that it can be adjusted in the maintenance station or in the well site according to the requirement. The special flexible joint can reduce the flexural stress of the drilling jar body efficiently. So it is the first selected drilling jar for vertical well, deep sell, directional well and complicated well operations.
Our Drill bits are come from CS brand and Kingdream Brand, which are the best famous brand in China and top 5 in the word, our drill bits has solded to more than 30 countries including USA and Russia with superior quality.
- Product Specifications
1) Condition: 100% new
2) Manufacturer brand name: CS or Kingdream brand
3) The exact bit size: 8 1/2" = 215.9mm
4) IADC code: 127 Steel tooth Tricone Bit
5) Seal type: Elastomer Sealed Bearing
6) Bearing type: Journal Sealed bearing bit with gauge protection
7) Nozzle quantity and nozzle size:3 pcs
8) Connection joint Pin size: 4 1/2 API Reg pin
3-Available sizes:
60mm,65mm,76mm,93mm,95mm,98mm(3 7/8),101.6mm,114mm,118mm,120mm,127mm(5)
130.1mm(5 1/8),133.3mm(5 1/4),139.7mm(5 1/2),142.8mm(5 5/8),149.2mm(5 7/8)
152.4mm(6),155.5mm(6 1/8),158.7mm(6 1/4),161.9mm(6 3/8),165.1mm(6 1/2)
190.5mm(7 1/2),193.6mm(7 5/8),200.0mm(7 7/8)
212.7mm(8 3/8),215.9mm(8 1/2),222.2mm8 3/4)
241.3(9 1/2),244.4(9 5/8),250.8(9 7/8)
269.8(10 5/8),295.3(11 5/8)
311.1(12 1/4),346.0 (13 5/8),349.2(13 3/4)
374.6(14 3/4)
381(15),393.7(15 1/2),406.4(16)
444.5(17 1/2),508(20),558(22),609.6(24)
660.4(26)
4-Available models:
Steel tooth (IADC) :
111, 121,131
117,124,126,127,136,137
211,311
216,217, 227
TCI (IADC):
415,435, 417,437
515,525,535,545, 517,527,537,547
615,625,635,,617,627,637,737
512,522,532,612,622,632,732
* Description:
The roller reamer (drilling reamer) is used for all kinds of reaming stabilization in drilling operation, especially the function of stabilization in drilling of the abrasive formation. It is a hot-sale tool for hole size from 4 5/8 to 26. Additionally, it can be used in different hole when same body is equipped with different bearing block and rollers.
* Feature:
a. The body is made of high quality alloy steel, fully heat treated to 285-341brinell hardness and 54J minimum impact strength.
b. Rollers can be changed easily at the well.
The basic principle of the hydrocyclone is to separate the two-phase or multi-phase mixture of liquid-liquid, liquid-solid, liquid-gas and so on with a certain density difference under the action of centrifugal force. The mixed liquid is tangentially flowed into the cyclone with a certain pressure, and a high-speed rotating flow field is generated in the cylindrical cavity. The high density components in the mixture under the action of the swirling flow at the same time along the axial downward movement along the radial outward movement in the reach of the cone down along the wall along the wall, and from the bottom outlet, thus forming The small vortex component moves toward the central axis and forms an upwardly moving internal vortex in the center of the axis, and then is discharged from the overflow port, thus achieving the purpose of two-phase separation.
Polyurethane characteristics:
1. The hardness range is wide, and the elongation and elasticity of the rubber are still under high hardness. The hardness range of polyurethane board is Shao A10-D80.
2. High strength. In rubber hardness under their tensile strength, tear strength and bearing capacity rubber is much higher than general. Under the high hardness the impact strength and flexural strength and is much higher than that of plastic.
3. Wear resistance. The wear resistance is very good, about 3-5 times of the rubber.
4. Oil resistance. Polyurethane board is a strong polar polymer, and the affinity of non polar mineral oil, in fuel oil and mechanical oil is almost no corrosion.
5. Good resistance to oxygen and ozone.
6. Excellent absorption performance, can be used to reduce the vibration, buffer effect. In the mold manufacturing industry, alternative rubber and spring.
7. It has good low temperature performance.
8. Radiation resistance, high energy - ray properties of the polyurethane, the use of the 10-10 radiation dose is still satisfactory.
9. Have good mechanical processing performance. (car, milling, grinding, drilling can be)
Application: widely used in machinery, transportation, oil, mining, construction, textile, sports and other fields.
The company to undertake a variety of specifications of the size of polyurethane products custom processing.
Description:
which is a matrix body PDC bit four to eight curved blades using arc-type ang short parabolic shape design, the rational allocation of different functions small size cutters,so that the PDC bit have a strong impact resistant, hyfrualic balance design, with each balde cuttting the amount of displacement is proportational to the volume of cutttings transports to match the PDC bit cutting transports capacity optimization. while using a dynamic flow simulation technlogy to optimize the hydraulic design of the PDC bit, so bottom hole flow field optimization, enhanced PDC bit cleaning, coolling capacity,more optimum bottom hle flow pattern and anti- balling.
Medium hard to hard formations with high compressive strength and abrasive, such as shale, limestone, anhydrite, sandstone and so on
The main structure features:
Tungsten carbide matrix PDC possesses high wear resistance and impact resistance.
Parabolic crown profile and maximizes junk slot area can clean bit better, and prolong the bit working life.
Applying hydraulics balance design, 5 renewal nozzles and reasonable nozzles locating angle can gain ideal fluid field in well bottom, fully clean and cool cutter, and prolong the cutter working life.
Non-symmetry blade arrangement enhances drilling well balance.
Optimization for cutter shape, slant angle, cutter numbers prolong the cutter working life in combination with high quality PDC cutter, and improve ROP and drilling efficiency.
It can be used on rotary or down hole motor.
High HIS is recommended.
Product Advantages:
1. PDC cutters for high speed drilling;
2. All cutters are premium grade for extended bit life and durability;
3. Cutter layout is force balanced to drill a precise round hole and reduce bit whirl;
4. Large junk slots and flushing ports;
5. Advanced geometric design for faster penetration;
6. Gauge pads have tungsten carbide inserts for maximum wear resistance;
Impregnated Diamond core bits Description:
The impregnated diamond drill bits are the most commonly useful bits in the mineral exploration industry, as they have the widest range of application. The high grades of synthetic diamond are distributed in the bit's matrix.
Casing Shoe:
The casing shoe bit is mainly used in handling casing tube in the shallow earth surfaces, and we have casing shoes bit in different hardness to better fit various casing tube bits.
The casing shoe diamond bit is mainly made up of diamond single crystal steel body, tungsten carbide and polycrystalline diamond.
Main functions of casing shoe:
1): Protect casing ends from distortion.
2): Help casing pass through stratum to bed rock.
3): Carry mud to earth surface.
4): Help down-pass of casing when drill rod is in hole.
size available:
Q series(Wireline Series): AQ, BQ, NQ, HQ, PQ, SQ,BQ3, NQ3, HQ3, PQ3
W Series: RW, EW, AW, BW, NW, HW, PW, SW, UW, ZW, HWT, PWT, BWS, NWS
Metric Series: 46, 56, 66, 76, 86, 101, 116, 131, 146
X Series: RX, EX, AX, BX, NX, HX, PX, SX, UX, ZX
TT series: NQTT, HQTT,PQTT
Geological Drill Rods
We manufacture drill rods are crafted from quality heat treated materials ensuring superior wear resistance, strength, and toughness in the most demanding applications.
Drill rods are available in DCDMA sizes AW, BW, NW and HW with tapered threaded tool joints in sizes AWY, BWY and NWY.
Drill rods are also available in Wireline sizes A, B,N, H, P and Metric sizes 42mm, 50mm, 60mm, 7Omm and 90mm.
We also manufacture Friction welded Drill Rods for other applications such as DTH Hammer rilling. Casing tubes are available in DCDMA sizes BW, NW, HW, PW and SW and Metric Sizes 46 -146 mm.
Specifications:
1.Whole heat treatment
2.Screw thread heat treatment.
3.Hard chromed on pin end
geological steel pipe-entire length thermal treatment, NC lathe with former cutters
Material:30CrMnSiA or 45MnMoB(A grade), XJY850 or BG850( B grade)
Impregnated Diamond core bits Description:
The impregnated diamond drill bits are the most commonly useful bits in the mineral exploration industry, as they have the widest range of application. The high grades of synthetic diamond are distributed in the bit's matrix.
Casing Shoe:
The casing shoe bit is mainly used in handling casing tube in the shallow earth surfaces, and we have casing shoes bit in different hardness to better fit various casing tube bits.
The casing shoe diamond bit is mainly made up of diamond single crystal steel body, tungsten carbide and polycrystalline diamond.
Main functions of casing shoe:
1): Protect casing ends from distortion.
2): Help casing pass through stratum to bed rock.
3): Carry mud to earth surface.
4): Help down-pass of casing when drill rod is in hole.
size available:
Q series(Wireline Series): AQ, BQ, NQ, HQ, PQ, SQ,BQ3, NQ3, HQ3, PQ3
W Series: RW, EW, AW, BW, NW, HW, PW, SW, UW, ZW, HWT, PWT, BWS, NWS
Metric Series: 46, 56, 66, 76, 86, 101, 116, 131, 146
X Series: RX, EX, AX, BX, NX, HX, PX, SX, UX, ZX
TT series: NQTT, HQTT,PQTT
Geological Drill Rods
We manufacture drill rods are crafted from quality heat treated materials ensuring superior wear resistance, strength, and toughness in the most demanding applications.
Drill rods are available in DCDMA sizes AW, BW, NW and HW with tapered threaded tool joints in sizes AWY, BWY and NWY.
Drill rods are also available in Wireline sizes A, B,N, H, P and Metric sizes 42mm, 50mm, 60mm, 7Omm and 90mm.
We also manufacture Friction welded Drill Rods for other applications such as DTH Hammer rilling. Casing tubes are available in DCDMA sizes BW, NW, HW, PW and SW and Metric Sizes 46 -146 mm.
Specifications:
1.Whole heat treatment
2.Screw thread heat treatment.
3.Hard chromed on pin end
geological steel pipe-entire length thermal treatment, NC lathe with former cutters
Material:30CrMnSiA or 45MnMoB(A grade), XJY850 or BG850( B grade)
Impregnated Diamond core bits Description:
The impregnated diamond drill bits are the most commonly useful bits in the mineral exploration industry, as they have the widest range of application. The high grades of synthetic diamond are distributed in the bit's matrix.
Casing Shoe:
The casing shoe bit is mainly used in handling casing tube in the shallow earth surfaces, and we have casing shoes bit in different hardness to better fit various casing tube bits.
The casing shoe diamond bit is mainly made up of diamond single crystal steel body, tungsten carbide and polycrystalline diamond.
Main functions of casing shoe:
1): Protect casing ends from distortion.
2): Help casing pass through stratum to bed rock.
3): Carry mud to earth surface.
4): Help down-pass of casing when drill rod is in hole.
size available:
Q series(Wireline Series): AQ, BQ, NQ, HQ, PQ, SQ,BQ3, NQ3, HQ3, PQ3
W Series: RW, EW, AW, BW, NW, HW, PW, SW, UW, ZW, HWT, PWT, BWS, NWS
Metric Series: 46, 56, 66, 76, 86, 101, 116, 131, 146
X Series: RX, EX, AX, BX, NX, HX, PX, SX, UX, ZX
TT series: NQTT, HQTT,PQTT
Geological Drill Rods
We manufacture drill rods are crafted from quality heat treated materials ensuring superior wear resistance, strength, and toughness in the most demanding applications.
Drill rods are available in DCDMA sizes AW, BW, NW and HW with tapered threaded tool joints in sizes AWY, BWY and NWY.
Drill rods are also available in Wireline sizes A, B,N, H, P and Metric sizes 42mm, 50mm, 60mm, 7Omm and 90mm.
We also manufacture Friction welded Drill Rods for other applications such as DTH Hammer rilling. Casing tubes are available in DCDMA sizes BW, NW, HW, PW and SW and Metric Sizes 46 -146 mm.
Specifications:
1.Whole heat treatment
2.Screw thread heat treatment.
3.Hard chromed on pin end
geological steel pipe-entire length thermal treatment, NC lathe with former cutters
Material:30CrMnSiA or 45MnMoB(A grade), XJY850 or BG850( B grade)
Geological Drill Rods
We manufacture drill rods are crafted from quality heat treated materials ensuring superior wear resistance, strength, and toughness in the most demanding applications.
Drill rods are available in DCDMA sizes AW, BW, NW and HW with tapered threaded tool joints in sizes AWY, BWY and NWY.
Drill rods are also available in Wireline sizes A, B,N, H, P and Metric sizes 42mm, 50mm, 60mm, 7Omm and 90mm.
We also manufacture Friction welded Drill Rods for other applications such as DTH Hammer rilling. Casing tubes are available in DCDMA sizes BW, NW, HW, PW and SW and Metric Sizes 46 -146 mm.
Specifications:
1.Whole heat treatment
2.Screw thread heat treatment.
3.Hard chromed on pin end
geological steel pipe-entire length thermal treatment, NC lathe with former cutters
Material:30CrMnSiA or 45MnMoB(A grade), XJY850 or BG850( B grade)
1. Standard: API
2. Pressure: 2000psi~20000psi
3. Sie: 3-1/8"~26-3/4"
Spacer spool, in accordane with API 6A, have end connectors of the same size, rated working pressure and design. Spacer spool is wellhead sections which have no prevision for suspension of tubular members and which may have no prevision for sealing of tubular members.
We manufacture the sapcer spool in all size and pressure ratings suitable for Well Head extension, BOP spacing, and Choke, Kill, and production Manifold applications.
We can produce all kinds of API 6A double studded adapter for wellhead use. It is important for wellhead use. It is important device to connect the different flange for wellhead, so the material of the body and studs and nuts shall be conforms the related requirements. The size is in accordance with API flange certification.
1. Applicable to connection at locations when drill platform, semi-submersible drilling vessel or drill vessel moves relatively and the installation dimensions of the drill rig subsequently change, and to delivery of oil, gas, mud and other high pressure media(including mainly relief line, blowout control line and choke kill line.)
2. Applicable standard: API Spec 16C.
3. The product features resitance to high preesure, thermal insulation, anti-flaming and fire resistance as well as inner wall with high abrasion resistance.
Lake can provide the drill pipes for Vemeer and Ditch Witch Drilling rigs, with long life service and good price.
The Products can be supplied:
1. Mud Pump:
8P-80, 9P-100, 10P-130, 12P-160, F-500, F-800, F-1000, F-1300, F-1600, PZ-7, PZ-9, PAH, TEE, W-440, W-446, 3NB350, 3NB-500C, 3NB-800C, 3NB-1000C, 3NB-1300C, 3NB-1600
2.Plunger Pump:
TWS600S, TWS2000, DOWILL300, HyT-400.
2. Skid- mounted & Pump Unit for each kinds of pump said above.
4. Spare Parts and Expendable parts: With the specialized & batched production liner, we can supply power end assembly, fluid end assembly and its spare parts, which can be easily matched & exchanged with some international famous mud pump brand.
Mono-Metal Liner
Lakeâ??s mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc.
Bi-Metal Liner
The outer sleeve of Rundongâ??s bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields.
Ceramic Liner
Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the linerâ??s flexural strength(�?) is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.
General Description for Drillingmud cleaner
1. QJ serial drilling fluid de-sanding and de-silting integrated mud cleaner; it is consisted of shale shaker and de-sander or de-silter, which is used for separating the solid-phase granules in the drilling fluid after treated by the vibrating screen.
2. The mud cleanercan integrate a group of de-sanding cyclones and de-silting cyclones on one vibrating screen. The drilling fluid will firstly pass the de-sanding cyclones or de-silting cyclones for separation, with overflow returning to the circulatory system and the bottom flow screened and treated by the vibrating screen. If necessary, the vibrating screen of the integrator could be used as the forestage vibrating screen.
3. The cyclone is made of wearing-resistant special polyurethane material, which has good performance in fluid erosion resistance. The feeding port is designed to have a round and smooth transition, beneficial for improved separation efficiency. It is smooth in structure and rational in design.
4. The de-silter is distributed in a round pattern, making the cyclones bear uniformed pressure and flow.
5. Different quantities of de-sanding cyclones and de-silting cyclones can be supplied according to the customersâ?? requirements.
Releasing and Circulating Overshot
1) Delivery on time
2) Standard export package
3) API-7-1 Standard
LAKE LT Overshot is one of the fishing tools which is fishing the pipes externally. It can catch drill collar, drill pipe, tubing, subs and other pipes. Because of the seals,the fluid can circulate with the high pump pressure after catching the fish. The top of the fish will be milled by under mill shoe. It can also work with jars to catch the stuck fishes. If the catched fish can't be release from stucking, we should release the overshot and lifting the drill string.
Product Description
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable.
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
APPLY TO BELOW BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Technical parameter
Specification:
1. Standad: API 16 A and ISO 9001
2. Rated Pressure: 2000Psi to 15000Psi(14-17 Mpa)
3. Size: Nominal Bore: 7-1/16" to 21-1/4" (179.4mm to 539.75mm)
4. Type: Shear Ram/ Pipe Ram/ Variable Bore Ram
5. Usage : Single Ram BOP/ Double Ram BOP/ Three Ram BOP
6.Brand:Shenkai and Rongsheng.
7.Imitate: Camaron and Shaffer
8.U type and SH type
Characters of BOP pare parts:
In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks.
Blowout preventer with spherical plastic core and dust-proof ring.
Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use.
Working of BOP pare parts:
When wells must be sealed in case of kicks high pressure (10.5Mpa) oil from control systems enters into close-cavity under piston from housing oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer to each other to moce the rubber between them to the center of wellhead so as to seal drilling tools or fully seal wellhead. In opening , hydraulic pressure oul enters into open-cavity above piston from housing oul inlet, to push piston moving downwards , so that plastic will reset with its own elasticity, wellhead will be open.
Specification:
1. Drill Pipe Wiper
2. Drill Pipe Wipers are made of specially designed rubber compound having tremendous resistance
to cutting, tearing and abrasion. They are available for water based and oil based drilling mud.
Designed for application.They are available for 5", 3.1/2", 2.3/8" and 2.5/8" drill pipes / tubings.
3.Size for 27/8",31/2" 5" 51/2"drill pipe
4.wiper is designed to clean casing,tubing in oilwell .
Advantages:
1. high strength- Resistance, wear- Resistance
2. Resistance to high temperature
3. Absorption oscillation resistance to high speed
4. Resistance to heavy load
5. Internationally advanced quality level, can be designed to meet the specific needs.
Description:
Material: Butyronitrile rubber is the basic material. The inner steel skeleton is to prevent deformation.
Main application: prevent drilling fluid returning from the drilling. Clear drilling fluid on the drill pipe wall to prevent the corrosion of metal.
Hardness: 8 to 95 �±5 shore A ,�±3 shore A tolerance specially
Color: for rubber, usually black, for silicone, can be in any color as you want
Machine type: 50 to 400 tons Mold/samples
lead-time: For prototype mold, usually in 7days For mass production mold, usually in 2 weeks
For some special molds, can be in 30 days, especially for some automotive rubber molds
Tool joints of our company are made of modified alloy steel, then fully heat treated. So the mechanical properties in accordance with API specifications, such as strength, hardness and impact strength are gaged to standard. All connections are gaged to API Spec. and phosphatized or copper plated for anti-galling treatment & resistance to corrosion.
Specifications:
1.API standard with best price excllent quality
2.in stock or 30 days
Main Material
Steel,steel-plastic:HDPE
Quality Control
Follow the API Q1 quality inspectionstandard. Base on the API 5CT Annex I when design the product.
Applications
Products are the required parts for oildrill pipes and drill color that can protect the thread of each side of pipe.Mainly Thread protectors can prevent your connector threads and pipe end fromdamaging during handling, transportation and storage.
Mud-pulse MWD(Measurement While Driling) was designed to meet various needs of hole diameters,hole size from 6in to 12 1/4 in depending on different MWD sub, flow rates and other drilling requirements.
Advantages:
1.Could be fishing
2.Save time , easy to assemble on wellsite
3.Low maintenance and using cost compare with similar products
4.More than 180hours downhoe working time(without gamma ray)
This system can be utilized to reduce lost in hole risk. In the event the BHA becomes stuck during the drilling process, the retrievable MWD system can be wireline retrieved, saving the customer the cost of replacing the MWD system.
LK-MWD tools can provide information about the conditions at the drill bit. This include:
Inclination
Azimuth
Toolface
Downhole Temperature
DIP
Magnetic field strength
Gamma Ray(Optional)
Product Description
1.competitive price and high quality
2. delivery timly and in stock
3.power:380v 50hz
4.Max.working pressure:34.5MPa(5000Psi )
The control system for surface mounted bop stacks is an important equipment for the control of bop stacks.choke and kill valves in the drilling and workover drilling operations .it has already passed the certificate of spec 16D.
Control System for Surface Mounted BOP Stack are from 2 to 14, being suitable for any difficult climate atmosphere.
Technical parameter
Main parameters as follows:
1.Environmental temperature:-13~40�°C
2, Power: 380v, 50Hz
3, Nominal pressure: 21MPa(3000Psi)
4.Max.working pressure:34.5MPa(5000Psi)
4, Pressure range: 0~14MPa(0~2000Psi)
5, Nitrogen charging pressure of accumulators: 7�±0.7MPa(1000�±100Psi)
6, Air supply pressure: 0.65~0.8MPa(93~115Psi)
7, Pressure range of pressure valve: 17.5~21MPa(2500~3000Psi)
8, Hydro-pneumatic pressure switch: 19~21MPa(2700~3000Psi)
Deadline anchors, Wireline anchors
Anchor Type Weight Indicator System is compatible with various versions of drilling rigs and workover rigs. They indicate and record variation of hook load and weight on bit during drilling and well service for the driller judging the operation situation and obtain proper drilling parameters. Each set of weight indicating system consists of a deadline anchor, a weight indicator and a recorder.
Can be used in drilling rig, workover drilling rig etc.
Material is High strength steel, extended the service time.
1.5 times pressure and tensile test before leaving the factory, high precision, stability, etc.
Two forms, horizontal and vertical.
Model JZG18A Deadline Anchor
-Max deadline load(Line pull capacity):180kN
-With hydraulic load sensor.
-Constructed with top-quality steel and proof-tested to 150% of rated capacity.
-Accommodate wireline sizes 1'',1-1/8'' or specify.
-Designed and tested for high strength, long life and exceptional accuracy.
-Floor mount.
-In accordance with API Standards, pass API8C Certificate, API ISO9001:2000
The Products can be supplied:
1. Mud Pump:
8P-80, 9P-100, 10P-130, 12P-160, F-500, F-800, F-1000, F-1300, F-1600, PZ-7, PZ-9, PAH, TEE, W-440, W-446, 3NB350, 3NB-500C, 3NB-800C, 3NB-1000C, 3NB-1300C, 3NB-1600
2.Plunger Pump:
TWS600S, TWS2000, DOWILL300, HyT-400.
2. Skid- mounted & Pump Unit for each kinds of pump said above.
4. Spare Parts and Expendable parts: With the specialized & batched production liner, we can supply power end assembly, fluid end assembly and its spare parts, which can be easily matched & exchanged with some international famous mud pump brand.
Lake can provide the drill pipes for Vemeer and Ditch Witch Drilling rigs, with long life service and good price.
1. Standard: API
2. Pressure: 2000psi~20000psi
3. Sie: 3-1/8"~26-3/4"
Spacer spool, in accordane with API 6A, have end connectors of the same size, rated working pressure and design. Spacer spool is wellhead sections which have no prevision for suspension of tubular members and which may have no prevision for sealing of tubular members.
We manufacture the sapcer spool in all size and pressure ratings suitable for Well Head extension, BOP spacing, and Choke, Kill, and production Manifold applications.
We can produce all kinds of API 6A double studded adapter for wellhead use. It is important for wellhead use. It is important device to connect the different flange for wellhead, so the material of the body and studs and nuts shall be conforms the related requirements. The size is in accordance with API flange certification.
Specifications:
API Spec 11B
5/8"(15.88),
3/4"(19.05),
7/8"(22.23)
1"(25.40)
1 1/8"(28.58)
Grade C,D,H,K,KD. Both 25ft and 30ft Length
The sucker rod is a steel rod that used to make up the mechanical assembly between the surface and downhole components of a rod pumping system.It is including main grade C and D.Grade H sucker rod made of high quality structural steel is the super strength and developed to suit for deep well, larger pumps and other heavy load.All sucker rods that our company provided standard with API specification 11B,quality class.
Fill and Circulate Tool (hereafter referred to as FAC Tool) is a surface tool used during the casing running operation. The FAC Tool is designed to both fill the casing with drilling fluid while running it in the hole and to enable quick circulation of the casing string at any time without installation of a casing swage. The FAC Tool has
features with easy â??to- use , safe and reliable , no leakage and so on, which lightens labor intensity of workers greatly and improves operation environment of well.
The FAC Tool is composed of ten parts (shown in figure) , whose main function of components are below:
1. Drill Pipe Connector: The FAC Tool built for top drive rigs connects to the drill pipe threads of the rigâ??s top drive unit via the Drill Pipe Connector. The threads of the Drill Pipe Connector are standard 4 1/2 IF, but crossovers are available for other drill pipe threads.
2. Extension: For applications where long elevator links are used, Extensions are placed between the Drill Pipe Connector and the Mandrel. On the Extension are two Pad Eyes that make it easy to manipulate the Tool around the Rig during rig up or rig down. Also, while the Tool is in use, a Safety Cable attaches to one of the Pad Eyes in the event the Tool should accidentally come loose from the top drive. In place of the Extensions, a Drill Pipe Pup can be used between the top drive connection and the Drill Pipe Connector instead of extension.
3. Mandrel: The Mandrel houses the specially designed Seal Assembly that is used to seal off the casing string. The Seal Assembly has three parts: the Seal Retainer, the Sealing Element, and the Gauge Ring.
4. Seal Retainer: Aluminum part that keeps (retains) the Sealing Element from being extruded upward while circulating.
5. Sealing Element: Elastomeric Seal that seals off the casing for circulation. It is hollow so circulation pressure can energize the seal it creates against the casing bore.
6. Gauge Ring: Tapered Aluminum piece that guides the Seal Assembly into the pipe and has holes to allow energizing pressure into the Sealing Element.
7. Retainer Sub: The Seal Assembly is held in place with the flexible hose.
8. Flexible Hose: The Retainer Sub is also used to connect a high pressure Flexible Hose. This Hose prevents any hard â??stack outâ?? between the FAC Tool and the casing and compensates for misalignment and casing movement during make up.
9. Mud Saver Valve: Below the Flexible Hose is the heart of the FAC Tool, the Mud Saver Valve. It is essentially a two-way check valve. This Valve opens with pressure when the mud pump is turned on and closes when the mud pump is turned off. It also permits flow in the upward direction for releasing pressure.
Product Description
1.competitive price and high quality
2. delivery timly and in stock
3.power:380v 50hz
4.Max.working pressure:34.5MPa(5000Psi )
The control system for surface mounted bop stacks is an important equipment for the control of bop stacks.choke and kill valves in the drilling and workover drilling operations .it has already passed the certificate of spec 16D.
Control System for Surface Mounted BOP Stack are from 2 to 14, being suitable for any difficult climate atmosphere.
Technical parameter
Main parameters as follows:
1.Environmental temperature:-13~40�°C
2, Power: 380v, 50Hz
3, Nominal pressure: 21MPa(3000Psi)
4.Max.working pressure:34.5MPa(5000Psi)
4, Pressure range: 0~14MPa(0~2000Psi)
5, Nitrogen charging pressure of accumulators: 7�±0.7MPa(1000±100Psi)
6, Air supply pressure: 0.65~0.8MPa(93~115Psi)
7, Pressure range of pressure valve: 17.5~21MPa(2500~3000Psi)
8, Hydro-pneumatic pressure switch: 19~21MPa(2700~3000Psi)
China supplier high quality LAKE Square drive Roller Kelly bushing consists of lower body half, upper body half, roller, roller pin and etc. when the bushing is installed to square kelly or hex kelly, the square part of the lower body half can be fitted in the square of the master bushing. When operating, the rotary table drive master bushing and master bushing drive Roller Kelly bushing and Roller Kelly bushing drive square kelly or hex Kelly to rotate, such is the torque transporting. The lower body half is conically shaped to readily enter the bore of the master bushing and automatically center bushing and drill string within the bore of the master bushing. Inside rollers are journal bearings which are fitted to the roller pin, when kelly rotates and moves downward, the rollers rotates with Kelly, such change sliding friction to rolling friction and minimize the abrasion of the kelly. The bushing is equipped with mud-scrapper assembly to clean the mud.
The Square Drive Roller Kelly Bushing provides the following advantages:
1.Pulling out or feeding off string can be done while rotating;
2.Because of its integral construction, it can not fly out and hurts you.
3.The bushing is easily installed into the master bushing, maintaining good alignment;
4.The contact between Kelly and roller is rolling contact, so friction is lower, and weight on bit is accurate;
5.The Kelly has lower wear and has long life.
1.Cutter Structure
The durability of premiun Tungsten carbide inserts is improved with new formulas and new techniques
2.Gauge Structure
Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inders and hardfacing on the shirttail increases gauge holding capacity and bearing life.
3.Bearing Structure
High Precision jourmal bearing with two thrust faces. Balls lock the cone. hardfaced head bearing surface. cone bearing inlaid with friction-reduceing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved,and suitable for high rotary speed.
4.Seal and Lubracation
Advance metal face seal lowers seal frictional force and overall seal torque and improves seal life. the pressure compensator syste, and advanced grease can greatly increas the lubracating relaibility.
5.Six-Point Position stabilzation Structure
The bit leg is designed with specific interated stability structure, which provides near six-point contact with borehole wall for the bie. this new feature gives the bit unequaled stability which greatly reduces bit vibration protects the cutting structure from damageding blows and keeps good borehole quality, the thickened nozzle wall can protecy hydraulic system from wear and fluid erosion.
6. Product Application
It is suitable for downhole motor and high speed applications, and is the ideal selection for drilling directional and horizontal wells.
Product Description
which is a matrix body PDC bit four of five curved blades using arc-type ang short parabolic shape design, the rational allocation of different functions small size cutters,so that the PDC bit have a strong impact resistant, hyfrualic balance design, with each balde cuttting the amount of displacement is proportational to the volume of cutttings transports to match the PDC bit cutting transports capacity optimization. while using a dynamic flow simulation technlogy to optimize the hydraulic design of the PDC bit, so bottom hole flow field optimization, enhanced PDC bit cleaning, coolling capacity,more optimum bottom hle flow pattern and anti- balling.soft to medium formation with lower compressive strength and good drillalility,such as marl shale lignite,sandstone, anhydrite tuff.etc
Features
1. Tungsten Carbide Matric PDC Possesse high weqar resistance and impact resisitance.
2.Parabolic Crown profile and maximizes junk slot area can clean bit better, and prolong the bit working life.
3.Applying hydraulics balance design,5 renewal nozzles and reasonable nozzles locking angle can gain ideal fluid field in well bottom, fully clean and cool cutter, and prolong the cutter working life.
4. Non- symmetry blade arragement enhances drilling well balance.
5. Optimizaiton for cutter shape, slant angle, cutter numbers prolong the cutter working lift in combination withe high quality PDC cutter, and improve ROP and drilling efficiency.
6.It can be used on rotary or down hole motor.
7.High HIS is recommended.
Product Advantages:
1. PDC cutters for high speed drilling;
2. All cutters are premium grade for extended bit life and durability;
3. Cutter layout is force balanced to drill a precise round hole and reduce bit whirl;
4. Large junk slots and flushing ports;
5. Advanced geometric design for faster penetration;
6. Gauge pads have tungsten carbide inserts for maximum wear resistance.
From WLA to WLP, Parallel Threaded Drill Rods, DCDMA sizes AW-HW, and Metric sizes 42mm to 90mm, tapered threaded drill rods, DCDMA sizes AWY to NWY, AWJ, BWJ and S75 drill rods.
Specification:
1. Our drill rods are of the highest quality ,are manufactured to exacting specifications using advancing maching technoogy.
2. They are manufactured from seamless steel tube by cold drawn.The material is XJY850/30CrMnSiA which meets the global standard.
3. Drill rods are made from quality heat treated materials which ensure superior strength, wear resistance and toughness in the most demanding applications.
4. Rods and casing are manufactured under stringent industry standards, and are field tested under a variety of conditions.
5. All rods are designed to be compatible with other rods manufactured to the standard DCDMA.
PDC Bits' ,Diamond Bits' cutter exposure is optimized to insure the bit can achieve higher ROP is soft to medium formations.
1.Cutting structure is force balanced and bit blade is asymmetrically designed so that the load
on bit is balanced that resulting better stability of the bit.
2.Main cutter are high performance PDC cutters to insure service life of the bit while improving
ROP.
3.Cutter exposure is optimized to insure the bit can achieve higher ROP is soft to medium
formations.
4.Shock absorbers are designed to make the bit capable of drilling through formations with hard
strigers.
5.Hydraulic system of the bit is optimized using dynamic flow pattern simulation technology to
enhance cleaning and cooling effects of the bit to effectively prevent bit from balling.
All products will be made according to API and related international standard as per customers' requirements.
Integral blade stabilizer is an important tool in the drilling engineering to control the well deviation. It can stabilize the drilling tools in the drilling process of oil, gas and geological exploration. It can increase the bit life, drilling speed and well bore quality. There are two kinds of integral stabilizers: spiral integral blade stabilizer and straight integral blade stabilizer.
Hardfacing type: HF1000, HF2000, HF3000, HF4000
Send your inquiry message to Anna Zhang in the comments section below:
All products will be made according to API and related international standard as per customers' requirements.
Integral blade stabilizer is an important tool in the drilling engineering to control the well deviation. It can stabilize the drilling tools in the drilling process of oil, gas and geological exploration. It can increase the bit life, drilling speed and well bore quality. There are two kinds of integral stabilizers: spiral integral blade stabilizer and straight integral blade stabilizer.
Hardfacing type: HF1000, HF2000, HF3000, HF4000
All products will be made according to API and related international standards as per customers' requirements.
Integral blade stabilizer is an important tool in drilling engineering to control the well deviation. It can stabilize the drilling tools in the drilling process of oil, gas and geological exploration. It can increase the bit life, drilling speed and well bore quality. There are two kinds of integral stabilizers: spiral integral blade stabilizer and straight integral blade stabilizer.
Hardfacing type: HF1000, HF2000, HF3000, HF4000
Non magnetic drill collar
Made of AISI4145H alloy steel, drill collar mainly used between the dill pipe and drill head and connected by conversion connector so that they can provide the pressure and weighting to dill head ,in order to make the dill head to keep right trace .
If order of inquiry please offer: Non magnetic drill collar
outer diameter of dill collar
handling features
length of drill collar
stress relief features
drill collar bore
connection type
1. About the Manual:
The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over).
2. CONSTITUTION:
Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) :
Crossover Sub
Safety Catch Sub
Power Section
Coupling Assembly
Bearing Assembly
3. Usage:
It is one kind of positive displacement downhole motor, with working principle is to convert the high pressure fluid power of mud into mechanical energy for bit rotation. It is widely used in oil field and mine directional well and horizontal well, cluster Wells and vertical Wells, drilling, deflecting, adjusting azimuth, coring, reaming, side tracking and workover treatment, and also applied in some special operations as compound drilling and traversing, etc.
Specifications We can produce series of downhole motors in different sizes, as 57(21/4"),73(23/4"),89(31/2"),95(33/4"),120(43/4"),127(5"),165(61/2"),172(63/4"),178(7"),185(71/4"),197(73/4"),203(8"),216(81/2"),244(95/8"), etc.
1. About the Manual:
The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over).
2. CONSTITUTION:
Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) :
Crossover Sub
Safety Catch Sub
Power Section
Coupling Assembly
Bearing Assembly
3. Usage:
It is one kind of positive displacement downhole motor, with working principle is to convert the high pressure fluid power of mud into mechanical energy for bit rotation. It is widely used in oil field and mine directional well and horizontal well, cluster Wells and vertical Wells, drilling, deflecting, adjusting azimuth, coring, reaming, side tracking and workover treatment, and also applied in some special operations as compound drilling and traversing, etc.
Specifications We can produce series of downhole motors in different sizes, as 57(21/4"),73(23/4"),89(31/2"),95(33/4"),120(43/4"),127(5"),165(61/2"),172(63/4"),178(7"),185(71/4"),197(73/4"),203(8"),216(81/2"),244(95/8"), etc.
1. tank top mud gun:
Tank top mud gun is usually with function of agitating, together with mud agitator, they are important equipments for drilling mud tank and mud mixing tank. And how many sets of agitator you have for the mud mixing tank, usually how many mud guns you have. But it also have exception, for example, when the tank room is very small, you have no room for the agitator, and the tank is not so large, you can use a mud gun instead, it is much cheaper, needs smaller area to install and convenient to operate, also do not need to use electric power, but use pressure to work, and you do not need to buy a lot of spare parts such as gear box, bearings for the mud agitator. Anyway mud gun has a lot of advantages but it can not replace mud agitator totally, the agitating effect is not so strong as agitator. We need to use them together to benefit from both of them.
2. Tank bottom mud gun:
Tank bottom mud gun also called inner tank mud gun, its function usually not agitating, but transferring and mixing line. It transfers the mud from mud mixing tank to another tank.
Where is the pressure come from ?
For high pressure mud gun, the pressure came from mud pump, for lower pressure mud gun, the pressure came from mixing pump, it can mix and transfer drilling mud to another tank.
At present, LAKE can produce 2 and 3 mud gun, both of them with 3 nozzles, it can be made into manual rotary type or fixed type, it is optional. And we will choose high pressure mud gun or low pressure mud gun according to the actual situation of clients.
For example, oilfield drilling mud solids control system usually use high pressure mud gun with high pressure gate valves. The HDD mud recycling system can use a low pressure mud gun which is much cheaper.
Purpose suitable for rotary hose for flexible connection between the top of the drilling riser and the vertically movable water faucet in the oil drilling and mud delivery systems, and for the adjustment of installing error between the drilling pump line and the riser for the connection and vibration isolation.
It is also suitable for delivering in large quantity at high pressure the water based or oil-based mud with the min. Aniline point at 66 pumped out of rotary drilling equipment. Moreover, it resists to corrosion from hydrogen sulfide and delivers water, oil, mud and other high pressure media in borehole operation in oil field.
Construction it made of inner sub or stainless steel armor inner tube, carbon fiber reinforce sub, middle sub, steel wire reinforce sub steel catenarian line reinforce sub, and carbon fiber outer sub.
The product is classified into steel wire reinforcing type and steel link line reinforcing type.
Applicable standard API Spec 7K SYT5469
API emblem practical license Numbers 7K 0082
Pressure Test Unit For BOP Or High Pressure Testing Pump
Characteristic and Advantages
- Specially suitable to the high pressure tests and ultra-high pressure tests in the field or in the workshop
- Standstill of the pump when reaching the setting pressure
- No energy consumption in case of long pressure holding times
- No dissipated heat during the pressure holding phase
- No risk for explosion and spark in oil and gas field due to air-operated pump
- Substitute of leakage by automatic re-delivery through the pump
- Regulator to control inlet air supply, then to adjust working pressure
- High pressure relief valve for protection
- Easy to install, move, use and maintain
- All piping and fittings are stainless steel for long lifespan
drilling spool and adapter can be designed according to customer's all kinds of models and sizes to meet the requirements in work site.
There are three kinds of connecting models for BOP connection and outlets, including flanged, studded and clamped-in style.
Gasket groove is line welded by stainless according to API Spec 6A, so as to prolong the using period and decrease the maintaining cost.
Accumulator unit for BOP stacks is a very important equipment which controls BOP stacks and gate valves controlled by hydraulic pressure especially in drilling and workover operations. It is necessary to accurately operate and maintain the hydraulic control system. It consists of remote control system, drillerâ??s panel, air cable (except electrical type), pipe rack (electrical warming system available for cold area), high pressure manifold, protection room, etc.
It can be divided into two types: Electrical type FKDQ series and Pneumatic type FKQ series.
blowout preventer accumulator unit, blowout preventer accumulator unit, blowout preventer accumulator unit, blowout preventer accumulator unit, blowout preventer accumulator unit, blowout preventer accumulator unit, blowout preventer accumulator unit, blowout preventer accumulator unit, blowout preventer accumulator unit, blowout preventer accumulator unit.
Complete diverter controls with sequencing options and indicators.
Alarm systems to alert operator of potential issues and if drilling operations should stop to prevent a possible uncontrolled well situation.
Components have been field tested for decades to ensure dependability, maximum life and minimal downtime service.
It work with most PLC manufacturersâ?? control equipment to be compatible with your rig electronics.
It can be designed and manufactured to any specification including ATEX, all European Directives, GOST, NORSOK, DNV, ABS and all major oil companies specifications.
Annular Blowout Preventer(Annular BOP) is important equipment for drilling well. It widly used in onshore and offshore drilling, Geothemal driling. We supply three type of annular BOP: Bloted-cover, Wedged-Cover and Latched-cover. All type of annular BOP are strictly manucatured as per API spec 16A, have same reliable quality as other US products.
Their types are Camaron, Shaffer and Hydril in the word.
Drilling Spool is the parts which are often used in the oilfield for well head extension, choke and kill manifold, etc. It is designed and manufactured is accordance with API 6A and API 17K standard, it usually has the same nominal end connections. Eternal company specializes on the manufacturing all sizes and pressure ratings used for oilfield applications. So many spools have been applied on many oilfields all over the world. Drilling spools allow the smooth circulation of mud during drilling operations and usually have the same nominal top and bottom end connections. Side outlet may differ from each other. Top, bottom, and side end connections can be hub end or flanged. We can also design customizable ideal spools for reliable and consistent performance on their production system. Our products have been exported to many countries, such as Russia, South Africa, India etc.
Send your inquiry message to Anna Zhang in the comments section below:
World famous brands of Top Drive including Varco, Canrig, NOV, BPM, JH, etc.
Top Drive Parts including Gooseneck, saver sub, IBOP, gear, stuffing box, washpipe, etc.
Lake Petro can supply China made interchangeable parts for above mentioned Top Drive Parts.
Air bag assembly is a part of mud pump, used as pressure balance on mud pump, the max pressure is 5000psi. It is forged by high quality alloy steel 35CrMo or 40CrMnMo, which holding high machinery performance and sprying technology.We can manufacture it used on almost all types of mud pumps or customize in accordance with your request.
features:
1. Pulsation Dampener are forged with 4130 Low-Temperature Resistance Alloy Steel
2. Pulsation Dampener has precise inside chamber size with surface roughness 6.3, increase the life span of the bladder.
3. Available in various materials to meet a wide range of applications
4. We have 7 national patents. We are going to build a complete customer service system, set up a Houston, TX based warehouse for various of expendables.
The basic principle of the hydro cyclone is to separate the two-phase or multi-phase mixture of liquid-liquid, liquid-solid, liquid-gas and so on with a certain density under the action of centrifugal force. The mixed liquid is tangentially flowed into the cyclone with a certain pressure, and a high-speed rotating flow field is generated in the cylindrical cavity. The high density components in the mixture under the action of the swirling flow at the same time along the axial downward movement along the radial outward movement in the reach of the force down along the wall along the wall, and from the bottom outlet, thus forming. The small vortex component moves toward the central axis and forms an upwardly moving internal vortex in the central of the axis, and then is discharged from the overflow port, thus achieving the purpose of two-phase separation.
The desander with underflow shaker is also called mini desander cleaner which is applicable for both weighted and unweighted drilling mud, while traditional desander no underflow vibrating screen only for unweighted drilling fluids. And comparing with large size desander and desilter assembly, the mini desander is cost-effective. For compact mud system used in HDD, CBM, water well drilling and mining project, mini desilter is an ideal choice.
Features:
(1). Desilter options with shaker and without shaker for flexible application.
(2). Desilter cones with PU material with better abrasion resistance.
(3). No under shaker design structure compact and assembly flexible.
(4). Mini desilter cleaner with shaker for both weighted / unweighted mud in various drilling.
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable/
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
APPLY TO BELOW BOP:
Brand: HYDRIL , SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type :Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Standard: API Spec 16A,16C
Working pressure:2000psi-15000psi(14 Mpa-105Mpa)
Operating temperature:-18deg--121deg
Bore size:7 1/16"-21 1/4"
Top & nottom connection:Flanged,studded
* description:
The roller reamer (drilling reamer) is used for all kinds of reaming stabilization in drilling operation, especially the function of stabilization in drilling of the abrasive formation. It is a hot-sale tool for hole size from 4 5/8â?� to 26â?�. Additionally, it can be used in different hole when same body is equipped with different bearing block and rollers.
* feature:
A. The body is made of high quality alloy steel, fully heat treated to 285-341brinell hardness and 54j minimum impact strength.
B. Rollers can be changed easily at the well.
Lake reverse circulation junk basket (rcjb) is designed to remove all types of small junk objects from the hole. The tools main feature eliminates pulling a wet string. Even when the tool is fitted with a magnet insert, reverse circulation is maintained.
Operation:
Lake reverse circulation junk basket is made up to the bottom of the fishing string and lowered to a point within several feet from the bottom of the hole. Begin circulation to wash the hole. Stop circulation and drop the steel ball. (when the steel ball is dropped into the valve seat, circulation fluid travels outward and downward through the inner passage of the barrel and out through the vents in the lower end. The fluid is then deflected to the center of the tool and up through the return holes in the upper end of the barrel. This reverse fluid circulation carries the junk into the barrel above the junk catcher.) begin circulation again, slowly rotating while lowering the tool until a 10â?? core has been cut. Stop rotation and circulation and pull the tool from the hole
The water swivel is mainly used in the geological exploration, and it is mainly comprised of high-pressure sealing ring, core tubes and spindle
It is available with different threads and mountings, and capable of being used in supplying of high pressure water, coolant, slurry etc.
We have 42 and 50 water swivel for clients worldwide, and they can work well in conjunction with various reducer unions of different drill rods.
Concerning its packing, our water swivel is packaged by standard plywood wooden box.
Features:
1. High effciency and long service lifespan are always available for this water swivel.
2. High-quality material and thread treat have been used in its manufacture.
3. Its automatically adjustable sealing ring is capable of guaranteeing normal operation of water-supplying rod.
4. Transverse device is equipped for it.
5. It features compact frame and light weight.
6. It is easy to work together with commom tools
Brand new Hydraulic Break out Tong can disconnect drill pipe from 42mm-127mm.
Adopt hydraulic to economize on manpower and improve working efficiency.
-
Product Main Material
Steel,HDPE
Quality Control
Follow the API Q1 quality inspectionstandard. Base on the API 5CT Annex I when design the product.
Applications
Products are the required parts for oildrill pipes and drill color that can protect the thread of each side of pipe.Mainly Thread protectors can prevent your connector threads and pipe end fromdamaging during handling, transportation and storage.
1. PDC Matrix Body bit
Type and feature
PDC bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
Bit Diameters: 5 7/8",6",6 1/2",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4",etc.Body type: Matrix or Steel Cutter Sizes:5/16"(8mm),1/2"(13mm),5/8"(16mm),3/4"(19mm),etc. Blades:2~9 Wings.
2. PDC Matrix Body Core Bit
Type and feature
PDC core bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
75/54mm,94/74mm,113/89mm,113/109mm,153/129mm,215/105mm,etc.
3. PDC Steel Body Bit
Type and feature
PDC bit can be customized for oil well,water well, mining, explorer well drilling.
Suitable formation
Various of hardness rocks or mud except the hardest hardness or ununiform rocks like cobble.
Main type
Bit Diameters: 5 7/8",6",6 1/2",8 1/2",9 1/2",9 5/8",9 7/8",12 1/4", etc. Body Type: Matrix or Steel Cutter Sizes:5/16"(8mm),1/2"(13mm),5/8"(16mm),3/4"(19mm),etc. Blades:2~9 Wings
4.PDC Drill Bit Body & Cutters Welding
PDC body(matrix)
Customized. Wings: 2~9. Main Diamters:65mm,75mm,94mm,113mm,133mm,152mm,215.9mm,311.1mm etc.
2.PDC body(steel)
Customized. Wings: 2~9. Main Diamters:65mm,75mm,94mm,113mm,133mm,152mm,215.9mm,311.1mm etc.
Core bit body(matrix or steel)
Main Type:75/54,94/74,113/89,113/109,153/129mm,110/215.9mm, etc.
4.PDC cutter and Welding OEM
PDC Cutters Type : 5/16"(8mm), 1/2"(13mm), 5/8"(16mm), 3/4"(19mm).
From WLA to WLP, Parallel Threaded Drill Rods, DCDMA sizes AW-HW, and Metric sizes 42mm to 90mm, tapered threaded drill rods, DCDMA sizes AWY to NWY, AWJ, BWJ and S75 drill rods.
Specification:
1. Our drill rods are of the highest quality ,are manufactured to exacting specifications using advancing maching technoogy.
2. They are manufactured from seamless steel tube by cold drawn.The material is XJY850/30CrMnSiA which meets the global standard.
3. Drill rods are made from quality heat treated materials which ensure superior strength, wear resistance and toughness in the most demanding applications.
4. Rods and casing are manufactured under stringent industry standards, and are field tested under a variety of conditions.
5. All rods are designed to be compatible with other rods manufactured to the standard DCDMA.
1. Barrel reamer-2:
Specification:
Size: 200-2000mm
Suitable for soft soil.
Connection with drill rod: Direct connection with drill rod
Octagonal connection
Connection with laid pipe: Within or without swivel
2. Cutting reamer:
Specification:
Size: 200-2000mm
Suitable for hard soil and strong-mantle rock.
Connection with drill rod: Direct connection with drill rod
Octagonal connection
3. Barrel reamer-3:
Specification:
Size: 200-2000mm
Suitable for soft soil.
Connection with drill rod: Direct connection with drill rod
Octagonal connection
Connection with laid pipe: Within or without swivel
4. Barrel reamer-1:
Specification:
Size:200-2000mm
Suitable for soft soil.
Connection with drill rod: Direct connection with drill rod
Octagonal connection
Connection with laid pipe: Within or without swivel
5. Fluted reamer:
Specification:
Size: 200-2000mm
Suitable for sand and medium-to-very hard soil.
Structure: Steel casting, Welded
Connection with drill rod: Direct connection with drill rod
Octagonal connection
Connection with laid pipe: Within or without swivel
Drill Collar Slips Type A are multi-segments slips. They can accommodate the changes of outer diameter after abrasion of drill collar. They are with light weight, large handling scale and reliable quality. This kind of slips are designed and manufactured according to API Spec 7K Specificationfor drilling and well servicing equipment.
Lifting Subs are of one-piece construction and manufactured from alloy steel fully heat-treated. The structure includes sloping shoulder and straight shoulder, which can be selected by customs. Lifting Subs are normally manufactured 1200mm long overall. But this type sub can be made to any length desired.
Specification:
1).size: 2'', 3'', 4''
2).working pressure:6000-20000psi(42Mpa-140Mpa)
3).working temperature: -29°C~121°C.
4).application enrvironment: standard or H2S
5).Standard: API standard
Introduction:
1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA.
2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa).
3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space.
4. Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load.
5. All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment.
6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced.
7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.
Dual-wall drill pipes is used for R. C. drilling, when it works, circulating medium is following through the gaps between the dual-wall pipes, carrying samples out of the holes efficiency, meanwhile, it can protect the hole from collapse, matching up with our R.C. air(water) swivel, GQ air-driven hollow DTH hammer can complete getthe samples constantly.
-
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable.
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
APPLY TO BELOW BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Technical parameter
Specification:
1. Standad: API 16 A and ISO 9001
2. Rated Pressure: 2000Psi to 15000Psi(14-17 Mpa)
3. Size: Nominal Bore: 7-1/16" to 21-1/4" (179.4mm to 539.75mm)
4. Type: Shear Ram/ Pipe Ram/ Variable Bore Ram
5. Usage : Single Ram BOP/ Double Ram BOP/ Three Ram BOP
6.Brand:Shenkai and Rongsheng.
7.Imitate: Camaron and Shaffer
8.U type and SH type
Characters of BOP pare parts:
In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks.
Blowout preventer with spherical plastic core and dust-proof ring.
Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use.
Working of BOP pare parts:
When wells must be sealed in case of kicks high pressure (10.5Mpa) oil from control systems enters into close-cavity under piston from housing oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer to each other to moce the rubber between them to the center of wellhead so as to seal drilling tools or fully seal wellhead. In opening , hydraulic pressure oul enters into open-cavity above piston from housing oul inlet, to push piston moving downwards , so that plastic will reset with its own elasticity, wellhead will be open.
Our company manufactures Wireline Drill Rods, BQ, NQ, HQ, PQ, PHD, Parallel Threaded Drill Rods, DCDMA Sizes AW, BW, NW, HW, and Metric sizes 42 mm, 50 mm, 60 mm to 90mm.
Note:
1. Thread oil should be used when screwing the drill rod and hammer knocking should be prohibited.
2. The drill rod stand should have buffer materials, like wood, rubber, and more. The contact between the threaded ends and iron tools should be forbidden.
3. During the relocation of drill rod, the thread protector should be screwed on the threaded parts so as to protect it from damages.
1.Cutter Structure
The durability of premiun Tungsten carbide inserts is improved with new formulas and new techniques
2.Gauge Structure
Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inders and hardfacing on the shirttail increases gauge holding capacity and bearing life.
3.Bearing Structure
High Precision jourmal bearing with two thrust faces. Balls lock the cone. hardfaced head bearing surface. cone bearing inlaid with friction-reduceing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved,and suitable for high rotary speed.
4.Seal and Lubracation
Advance metal face seal lowers seal frictional force and overall seal torque and improves seal life. the pressure compensator syste, and advanced grease can greatly increas the lubracating relaibility.
5.Six-Point Position stabilzation Structure
The bit leg is designed with specific interated stability structure, which provides near six-point contact with borehole wall for the bie. this new feature gives the bit unequaled stability which greatly reduces bit vibration protects the cutting structure from damageding blows and keeps good borehole quality, the thickened nozzle wall can protecy hydraulic system from wear and fluid erosion.
6. Product Application
It is suitable for downhole motor and high speed applications, and is the ideal selection for drilling directional and horizontal wells
1. Tungsten Carbide Matric PDC Possesse high weqar resistance and impact resisitance.
2.Parabolic Crown profile and maximizes junk slot area can clean bit better, and prolong the bit working life.
3.Applying hydraulics balance design,5 renewal nozzles and reasonable nozzles locking angle can gain ideal fluid field in well bottom, fully clean and cool cutter, and prolong the cutter working life.
4. Non- symmetry blade arragement enhances drilling well balance.
5. Optimizaiton for cutter shape, slant angle, cutter numbers prolong the cutter working lift in combination withe high quality PDC cutter, and improve ROP and drilling efficiency.
6.It can be used on rotary or down hole motor.
7.High HIS is recommended.
Product Advantages:
1. PDC cutters for high speed drilling;
2. All cutters are premium grade for extended bit life and durability;
3. Cutter layout is force balanced to drill a precise round hole and reduce bit whirl;
4. Large junk slots and flushing ports;
5. Advanced geometric design for faster penetration;
6. Gauge pads have tungsten carbide inserts for maximum wear resistance;
Pneumatic spiders are designed and manufactured according to API Spec 7K for heavy or medium duty use. They are made of high alloy steel and heat treated for strength and wear resistance.
Type QQP Pneumatic Spiders are utilized to handling drill pipe and tubing in oil well repairing. This type spider can accommodate pipe from 23/8 to 5 inch, the rated load is 60-100 tons.
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable.
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
APPLY TO BELOW BOP:
Brand: HYDRIL , SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type :Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Standard: API Spec 16A,16C
Working pressure:2000psi-15000psi(14 Mpa-105Mpa)
Operating temperature:-18deg--121deg
Bore size:7 1/16"-21 1/4"
Top & nottom connection:Flanged,studded
1.The Quick-operating Thread Protector is a manually-operated device for protecting external pin-end threads on casing. It is simple, tough and secure, The fast and easy operation of Quick-operating Thread Protectors saves casing screw time, saves rig time and saves your money.
2.The Quick-operating Thread Protector consists of a high strength spring-steel band molted inside strong, abrasion-resistant rubber. An adjustable cam-type latch assembly is incorporated for manual locking and unlocking of the protector. To operate the Quick-operating Thread Protector, place the protector on the pin-end threads of pipe, push the handle firmly toward the center of the pipe and the locking action securely closes it in place. Pull the handle out to release.
The Shear Relief Valve consists of stem, body, box, cut pin and shroud. The mud pressure acts on the lower end of the valve body, and the valve body is subjected to an upward thrust, which is cut by the stem to cut the cut. When the thrust is such that the shearing stress received by the shearing pin is greater than the shear strength limit of the shearing material, the shearing pin is cut. When the diameter of the piston is determined, different mud pressures can be controlled by the different diameters of the shearing pins. Therefore, in the construction, as long as the construction technology requirements, to determine the mud pressure, the different diameter of the shear pin can be inserted into the corresponding hole.
Main Parameters
1. Easy to open and close
2.Piston Presure bearing area is small
3.Simple to adjust
4.Suit for multifold mud pumps
5.Type: flange and thread
6. useage: Mud pump accessories
7. interchangeable with all brand (F series, 3NB series etc)
Main Material
plastic and steel plastic
Quality Control
Follow the API Q1 quality inspection standard. Base on the API 5CT Annex I when design the product.
Applications
Products are the required parts for oil drill pipes and drill color that can protect the thread of each side of pipe.Mainly Thread protectors can prevent your connector threads and pipe end fromdamaging during handling, transportation and storage.
Non magnetic drill collar
Made of AISI4145H alloy steel, drill collar mainly used between the dill pipe and drill head and connected by conversion connector so that they can provide the pressure and weighting to dill head ,in order to make the dill head to keep right trace .
If order of inquiry please offer: Non magnetic drill collar
·outer diameter of dill collar
·handling features
·length of drill collar
·stress relief features
·drill collar bore
·connection type
API high quality mud pump bi-metal liner, triplex mud pump liner
1.Mud Pump Liner Type: Bi-metal liner, ceramic liner
2.Mud Pump Liner Standard: API 7K
Mud Pump Liner Description:
1. Our company could supply all spec premium liners and ceramic liners used in various brands of mud pumps.
2. Our premium liners are made of a forged steel outer shell and a high chromium iron inner sleeve. The out shell is centrifugally forged with high quality carbon steel, with Tensile Strength > 610Mpa, Yield Strength > 450 Mpa, Elongation >17%, Hardness HB -180-200; The inner sleeve is centrifugally forged with high chrome iron alloy, with Hardness over HRC62 after heat treatment. Each liner is machined to close tolerances to assure ease of installation and long liner life with the inside diameter of these premium liners honed to a mirror-like finish for smooth even wear during the life of the liner. It could serve more than 800 hours.
3. Our ceramic liners are made of a forged steel outer shell and a ceramic inner sleeve. We can supply Zirconia(ZrO3) sleeves as well as Alumina(Al2O3) sleeves. The ceramic liners are mainly used for well drilling and geological explorations especially widely used in harsh oil mining environment, offshore well&gas exploration etc. It serves a 5 to 10 times longer life than metal products, and will cut down the mining cost of more than 50%.
Our company manufactures Wireline Drill Rods, BQ, NQ, HQ, PQ, PHD, Parallel Threaded Drill Rods, DCDMA Sizes AW, BW, NW, HW, and Metric sizes 42 mm, 50 mm, 60 mm to 90mm.
Note:
1. Thread oil should be used when screwing the drill rod and hammer knocking should be prohibited.
2. The drill rod stand should have buffer materials, like wood, rubber, and more. The contact between the threaded ends and iron tools should be forbidden.
3. During the relocation of drill rod, the thread protector should be screwed on the threaded parts so as to protect it from damages.
From WLA to WLP, Parallel Threaded Drill Rods, DCDMA sizes AW-HW, and Metric sizes 42mm to 90mm, tapered threaded drill rods, DCDMA sizes AWY to NWY, AWJ, BWJ and S75 drill rods.
Specification:
1. Our drill rods are of the highest quality ,are manufactured to exacting specifications using advancing maching technoogy.
2. They are manufactured from seamless steel tube by cold drawn.The material is XJY850/30CrMnSiA which meets the global standard.
3. Drill rods are made from quality heat treated materials which ensure superior strength, wear resistance and toughness in the most demanding applications.
4. Rods and casing are manufactured under stringent industry standards, and are field tested under a variety of conditions.
5. All rods are designed to be compatible with other rods manufactured to the standard DCDMA.
A mud cleaner is a combination of desanders and/or desilters mounted over a shaker with a fine mesh screen. A mud is fed to the inlet of the hydrocyclone (desander and/or desilter) to separate particles and the underflow passes to the fine screen mesh where in particles larger than barite are discarded and thrown away. In most drilling operations, a mud cleaner is installed in its mud systems. It is usually located in a mud tank in the same location as with the desilters.
1.The Quick-operating Thread Protector is a manually-operated device for protecting external pin-end threads on casing. It is simple, tough and secure, The fast and easy operation of Quick-operating Thread Protectors saves casing screw time, saves rig time and saves your money.
2.The Quick-operating Thread Protector consists of a high strength spring-steel band molted inside strong, abrasion-resistant rubber. An adjustable cam-type latch assembly is incorporated for manual locking and unlocking of the protector. To operate the Quick-operating Thread Protector, place the protector on the pin-end threads of pipe, push the handle firmly toward the center of the pipe and the locking action securely closes it in place. Pull the handle out to release.
Mono-Metal Liner
Lakeâ??s mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc.
Bi-Metal Liner
The outer sleeve of Rundongâ??s bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields.
Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the linerâ??s flexural strength(�?) is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.
Mono-Metal Liner
Lakeâ??s mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc.
Bi-Metal Liner
The outer sleeve of Rundongâ??s bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields.
Ceramic Liner
Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the linerâ??s flexural strength(�?) is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.
Mono-Metal Liner
Lake mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc.
Bi-Metal Liner
The outer sleeve of Rundongs bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields.
Ceramic Liner
Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the linerâ??s flexural strength(�?) is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.
Geological Drill Rods
We manufacture drill rods are crafted from quality heat treated materials ensuring superior wear resistance, strength, and toughness in the most demanding applications.
Drill rods are available in DCDMA sizes AW, BW, NW and HW with tapered threaded tool joints in sizes AWY, BWY and NWY.
Drill rods are also available in Wireline sizes A, B,N, H, P and Metric sizes 42mm, 50mm, 60mm, 7Omm and 90mm.
We also manufacture Friction welded Drill Rods for other applications such as DTH Hammer rilling. Casing tubes are available in DCDMA sizes BW, NW, HW, PW and SW and Metric Sizes 46 -146 mm.
Specifications:
1.Whole heat treatment
2.Screw thread heat treatment.
3.Hard chromed on pin end
geological steel pipe-entire length thermal treatment, NC lathe with former cutters
Material:30CrMnSiA or 45MnMoB(A grade), XJY850 or BG850( B grade)
It is JZ series weight indicator of an important part of, oil, geological exploration rig, workover drilling or workover process, measuring the drill hanging weight and WOB change, an instrument, to help driller master the operating parameters of the rig, workover rig drilling or workover and judgment drilling work status.JZGdead line anchor made of high-quality steel, after 150% overload capacity test. High precision, solid, stable and reliable. Supporting the use of heavy table and the sensor with JZ.
BOP Testing Unit, also called pressure test pump which is recommended for high pressure testing of BOP stacks, choke and kill lines, Christmas trees and any other type of equipment requiring high pressure static testing. Test Units are available in unit-mounted, portable, skid-mounted and high flow electric driven styles. Accessories include stand-mounted chart recorders and high pressure hose assemblies. High Pressure Test Units are provided in working pressure ranges from 5,000 to 20,000 PSI.
Accessories of pressure test unit, including stand-mounted chart recorders and high pressure BOP Accumulator Units, meet the design specification specified in API 16D. Customized pressure test pump is available to assure reliable control of the BOP stack with adequate reserve for continuous operation under emergency conditions.
BOP Testing Unit
Running stability, small size, light weight, low noise, easy maintenance and high efficiency.
Can be controlled locally and remotely, and monitor, record, print and track the recording value.
Can be used both in factory and in the field installed on a vehicle.
In accordance with API 16D.
Three type of pump: Electric, Pneumatic and Electro-Pneumatic.
ZQ series of drill pipe power tong marked with III are developed types from ZQ203-100 power tong. The power tong can be fixed on the accommodation track for front and back walk. It can pass across the well head and go to the mouse hole for working. Master tong can move upward and downward. Walk and lift of the tong can be remote controlled and automatically handled. Especially suitable for the occation with small wellbay suface.
1. About the Manual
The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over).
2. ADVANTAGES OF DOWNHOLE MOTOR
Increased rate of penetration.
Better hole deviation control.
Reduction in drill string failure rate.
Reduction in wear and tear of the swivel, Kelly, and rotary drives.
Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
3. CONSTITUTION
Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) :
Crossover Sub
Safety Catch Sub
Power Section
Coupling Assembly
Bearing Assembly
Mud motor, Downhole Motor used for HDD machine Rock conditation Drilling, Rock tools
Purpose suitable for rotary hose for flexible connection between the top of the drilling riser and the vertically movable water faucet in the oil drilling and mud delivery systems, and for the adjustment of installing error between the drilling pump line and the riser for the connection and vibration isolation.
It is also suitable for delivering in large quantity at high pressure the water based or oil based mud with the min. Aniline point at 66 pumped out of rotary drilling equipment. Moreover, it resists to corrosion from hydrogen sulfide and delivers water, oil, mud and other high pressure media in borehole operation in oil field.
Construction it made of inner sub or stainless steel armor inner tube, carbon fiber reinforce sub, middle sub, steel wire reinforce sub steel catenarian line reinforce sub, and carbon fiber outer sub.
The product is classified into steel wire reinforcing type and steel link line reinforcing type.
Applicable standard API Spec 7K SYT5469
API emblem practical license Numbers 7K 0082
Fixed Diameter Hole Opener is used for enlarging the surface hole which drilled by cone bit in advance, or connected above the cone bit. It applies to Onshore and Offshore oilfield.
Cutter type:
SM: Soft to medium formation
MH: Medium to hard formation
XH: Hard formation.
World famous brands of Top Drive including Varco, Canrig, NOV, BPM, JH, etc.
Top Drive Parts including Gooseneck, saver sub, IBOP, gear, stuffing box, washpipe, etc.
Lake Petro can supply China made interchangeable parts for above mentioned Top Drive Parts.
Roll-Forged Sheaves are available in many configurations in order to meet various oilfield applications.
â?¢ Roll-Forgedâ?¢ sheaves are available in sizes up to 78â?? in diameter.
â?¢ Applications should provide for tightening separator plates against bearing cones to adjust and insure proper function of bearing.
â?¢ Each sheave in the table below has a machined bore sized to accept the respective bearing number shown.
â?¢ The sheaves are provided from the factory plain bore (the bearings are not included).
How to contact us?
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable/
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
APPLY TO BELOW BOP:
Brand: HYDRIL , SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type :Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Standard: API Spec 16A,16C
Working pressure:2000psi-15000psi(14 Mpa-105Mpa)
Operating temperature:-18deg--121deg
Bore size:7 1/16"-21 1/4"
Top & nottom connection:Flanged,studded
How to contact us?
Type
TCI(Tungsten Carbide Insert) tricone bit
IADC CODE Available
417 427 437 517 527 537 617 627 637 737 837 832 415 425 445
525 625 635 416 427 436 446 447 516 526 537 547 516 536 535
Available sizes:
3 3/4" (95mm), 4 1/8 (105mm), 4 1/4"(108mm), 4 3/4 (121mm), 5 5/8"(143mm), 5 7/8 (149mm), 6 (152mm), 6 1/4"(159mm), 6 1/2"(165mm), 6 3/4"(171mm), 7 1/2"(190mm), 7 7/8 (200mm), 8 1/2 (216mm), 8 3/4" (222mm), 9 1/2 (241mm), 9 5/8"(245mm), 9 7/8"(250mm), 10 5/8"(269mm), 12 1/4"(311mm), 14 3/4"(348mm), 17 1/2"(445mm)
Application formations
Soft ,medium soft ,hard,medium hard,very hard formation
Material
Body: Alloy steel
Tooth marterial: Tungsten carbide insert(TCI)
Fill and Circulate Tool (hereafter referred to as FAC Tool) is a surface tool used during the casing running operation. The FAC Tool is designed to both fill the casing with drilling fluid while running it in the hole and to enable quick circulation of the casing string at any time without installation of a casing swage. The FAC Tool has
features with easy â??to- use , safe and reliable , no leakage and so on, which lightens labor intensity of workers greatly and improves operation environment of well.
The FAC Tool is composed of ten parts (shown in figure) , whose main function of components are below:
1. Drill Pipe Connector: The FAC Tool built for top drive rigs connects to the drill pipe threads of the rigâ??s top drive unit via the Drill Pipe Connector. The threads of the Drill Pipe Connector are standard 4 1/2 IF, but crossovers are available for other drill pipe threads.
2. Extension: For applications where long elevator links are used, Extensions are placed between the Drill Pipe Connector and the Mandrel. On the Extension are two Pad Eyes that make it easy to manipulate the Tool around the Rig during rig up or rig down. Also, while the Tool is in use, a Safety Cable attaches to one of the Pad Eyes in the event the Tool should accidentally come loose from the top drive. In place of the Extensions, a Drill Pipe Pup can be used between the top drive connection and the Drill Pipe Connector instead of extension.
3. Mandrel: The Mandrel houses the specially designed Seal Assembly that is used to seal off the casing string. The Seal Assembly has three parts: the Seal Retainer, the Sealing Element, and the Gauge Ring.
4. Seal Retainer: Aluminum part that keeps (retains) the Sealing Element from being extruded upward while circulating.
5. Sealing Element: Elastomeric Seal that seals off the casing for circulation. It is hollow so circulation pressure can energize the seal it creates against the casing bore.
6. Gauge Ring: Tapered Aluminum piece that guides the Seal Assembly into the pipe and has holes to allow energizing pressure into the Sealing Element.
7. Retainer Sub: The Seal Assembly is held in place with the flexible hose.
8. Flexible Hose: The Retainer Sub is also used to connect a high pressure Flexible Hose. This Hose prevents any hard stack out between the FAC Tool and the casing and compensates for misalignment and casing movement during make up.
9. Mud Saver Valve: Below the Flexible Hose is the heart of the FAC Tool, the Mud Saver Valve. It is essentially a two-way check valve. This Valve opens with pressure when the mud pump is turned on and closes when the mud pump is turned off. It also permits flow in the upward direction for releasing pressure.
Air operated thread protector is also called Inflatable thread protector. It is used to protect the outer thread of casing and tubing pipe. Its outstanding feature is that its gas nozzle is manufactured on the facade, which can protect the gas nozzle in the pipes loading, unloading and transportation process. The gas nozzle of dismountable inflatable thread protector is on the side, which may damage the gas nozzle. Inflatable thread protector is made from polyurethane containing a stainless steel ring in it, so integral inflatable thread protector is resistant to corrosion, abrasion and oil. It has many advantages, such as fast inflation, easy operation, good air-tightness, lowering consumption and cost. Besides, it can be repeatedly used.
Features:
The Air operated Thread Protectors provide a 360�° grip with greater, evenly divided holding power. - Durability is enhanced because the outside of the protectors does not change; only the inside inflates to provide a better grip on the pin.
-Absence of moving parts, metal clamping bars, or other mechanisms provides a long and virtually maintenance-free life cycle.
-The bottom of each protector contains a rugged buffer.
-Air operated thread protectors provide firm attachment to all thread types for greater operational flexibility.
-Rugged construction makes this protectors resistant to high temperatures and rough handling for a long life cycle.
-Pressurization by air facilitates installation and release for operational efficiency.
Roll-Forged Sheaves are available in many configurations in order to meet various oilfield applications.
Roll-Forged sheaves are available in sizes up to 78 in diameter.
Applications should provide for tightening separator plates against bearing cones to adjust and insure proper function of bearing.
Each sheave in the table below has a machined bore sized to accept the respective bearing number shown.
The sheaves are provided from the factory plain bore (the bearings are not included).
Type
TCI(Tungsten Carbide Insert) tricone bit
IADC CODE Available
417 427 437 517 527 537 617 627 637 737 837 832 415 425 445
525 625 635 416 427 436 446 447 516 526 537 547 516 536 535
Available sizes:
3 3/4" (95mm), 4 1/8â??(105mm), 4 1/4"(108mm), 4 3/4â??(121mm), 5 5/8"(143mm), 5 7/8â??(149mm), 6â??(152mm), 6 1/4"(159mm), 6 1/2"(165mm), 6 3/4"(171mm), 7 1/2"(190mm), 7 7/8â??(200mm), 8 1/2â??(216mm), 8 3/4" (222mm), 9 1/2â??(241mm), 9 5/8"(245mm), 9 7/8"(250mm), 10 5/8"(269mm), 12 1/4"(311mm), 14 3/4"(348mm), 17 1/2"(445mm)
Application formations
Soft ,medium soft ,hard,medium hard,very hard formation
Material
Body: Alloy steel
Tooth marterial: Tungsten carbide insert(TCI)
API 6A Standard spacer spool and drilling spool
1. Standard: API
2. Pressure:2000PSI-20000PSI
3. Size: 3 1/8"--26 3/4"
Spacer spool, in accordance with API 6A, have end connectors of the same size, rated working pressure and design. Spacer spool is wellhead sections which have no provision for suspension of tubular members and which may have no provision for sealing of tubular members
We manufacture the spacer spool in all sizes and pressure ratings suitable for Well Head extension, B.O.P. spacing, and Choke, Kill, and Production Manifold applications. spacer spool usually has the same nominal end connections. spacer spool identification consists of naming each end connection and the overall length (outside of end connection face to outside of end connection face).
We can produce all kinds of API 6A double studded adapter for wellhead use. It is the important device to connection the defferent flange for wellhead, so the material of the body and studs and nuts shall be conforms the related requirements. The size is in accordance with API flange certification.
DSA (Double Studded Adapter)
API 6A 10000PSI 7-1/16" Double Stud Adapter
7-1/16"x13-5/8"
5000psi,10000psi,15000psi
API 6A
Materials:AISI4130
API 6A 10000PSI 7-1/16" Double Stud Adapter
7-1/16"x13-5/8"
5000psi,10000psi,15000psi
API 6A
Materials:AISI4130.
1. Module is made from 4135 alloy steel with strict forging and heat treatment process, or Ceramic (Zirconia and Aluminium Oxide).
2. Mud pump fluid end parts offer full lines of Cylinder Head, Valve Lock Cover, Valve Assy, Cylinder Head Threaded Ring, Cylinder head Plug, Valve Cover Plug, Upper Valve Guide, Lower Valve Guide, Liner Threaded Ring, Liner Lock, Wear Plate and much more.
3. Three types of Liner: High chrome sleeve, single shell, zirconia ceremic liner.
4. Pony rod and piston rod is made of premium quality, heat treated alloy steel.
5. Valve and seat assembly are made of forged alloy steel with deep carburized wear surface. We offer a full range of valves and seats which include full open valve and seat, 3 web / 4 web design valve and seat .
The swivel includes two main categories, which are common swivel and double duty swivel. Double duty swivel is a common swivel combined with a spinner. Common swivel consists of swivel bail, shell, support, gooseneck, central pipe, master bearing, joint and other parts. The lower end is connected with kelly stem by REG thread. The swivel bail is hung on the hook. Gooseneck and rotary hose can be connected by REG thread connection or union connection.
Washpipe packing set assembly adopts cassette structure, so it can be quickly replaced without disassembling rotary hose and gooseneck. 3LP and 4LP internal or external thread hose connection thread are available for you. We can also manufacture low temperature resistant swivel according to customer's requirements.
Our swivel meets API SPEC 8CPSL1 standards. It has been awarded the API certification issued by the American Petroleum Institute and is allowed to use API monogram.
Specification:
1. Drill Pipe Wiper
2. Drill Pipe Wipers are made of specially designed rubber compound having tremendous resistance
to cutting, tearing and abrasion. They are available for water based and oil based drilling mud.
Designed for application.They are available for 5", 3.1/2", 2.3/8" and 2.5/8" drill pipes / tubings.
3.Size for 27/8",31/2" 5" 51/2"drill pipe
4.wiper is designed to clean casing,tubing in oilwell .
Advantages:
1. high strength- Resistance, wear- Resistance
2. Resistance to high temperature
3. Absorption oscillation resistance to high speed
4. Resistance to heavy load
5. Internationally advanced quality level, can be designed to meet the specific needs.
Description:
Material: Butyronitrile rubber is the basic material. The inner steel skeleton is to prevent deformation.
Main application: prevent drilling fluid returning from the drilling. Clear drilling fluid on the drill pipe wall to prevent the corrosion of metal.
Hardness: 8 to 95 ±5 shore A ,±3 shore A tolerance specially
Color: for rubber, usually black, for silicone, can be in any color as you want
Machine type: 50 to 400 tons Mold/samples
lead-time: For prototype mold, usually in 7days For mass production mold, usually in 2 weeks
For some special molds, can be in 30 days, especially for some automotive rubber molds
Air bag assembly is a part of mud pump, used as pressure balance on mud pump, the max pressure is 5000psi. It is forged by high quality alloy steel 35CrMo or 40CrMnMo, which holding high machinery performance and sprying technology.We can manufacture it used on almost all types of mud pumps or customize in accordance with your request.
features:
1. Pulsation Dampener are forged with 4130 Low-Temperature Resistance Alloy Steel
2. Pulsation Dampener has precise inside chamber size with surface roughness 6.3, increase the life span of the bladder.
3. Available in various materials to meet a wide range of applications
4. We have 7 national patents. We are going to build a complete customer service system, set up a Houston, TX based warehouse for various of expendables.
1. Module is made from 4135 alloy steel with strict forging and heat treatment process, or Ceramic (Zirconia and Aluminium Oxide).
2. Mud pump fluid end parts offer full lines of Cylinder Head, Valve Lock Cover, Valve Assy, Cylinder Head Threaded Ring, Cylinder head Plug, Valve Cover Plug, Upper Valve Guide, Lower Valve Guide, Liner Threaded Ring, Liner Lock, Wear Plate and much more.
3. Three types of Liner: High chrome sleeve, single shell, zirconia ceremic liner.
4. Pony rod and piston rod is made of premium quality, heat treated alloy steel.
5. Valve and seat assembly are made of forged alloy steel with deep carburized wear surface. We offer a full range of valves and seats which include full open valve and seat, 3 web / 4 web design valve and seat .
1. Module is made from 4135 alloy steel with strict forging and heat treatment process, or Ceramic (Zirconia and Aluminium Oxide).
2. Mud pump fluid end parts offer full lines of Cylinder Head, Valve Lock Cover, Valve Assy, Cylinder Head Threaded Ring, Cylinder head Plug, Valve Cover Plug, Upper Valve Guide, Lower Valve Guide, Liner Threaded Ring, Liner Lock, Wear Plate and much more.
3. Three types of Liner: High chrome sleeve, single shell, zirconia ceremic liner.
4. Pony rod and piston rod is made of premium quality, heat treated alloy steel.
5. Valve and seat assembly are made of forged alloy steel with deep carburized wear surface. We offer a full range of valves and seats which include full open valve and seat, 3 web / 4 web design valve and seat .
Drill Pipe Screens are an important part of the directional drilling tool string. They filter out large particles in the mud protecting the MWD tools below. The Drill Pipe Screens are made of 3/16 thick perforated stainless steel, with 17-4 hub and end cap heat treated to H900. This combination of materials has been field proven to outlast the competition in high wash environments. Our screens are available in every configuration to fit your specific requirements.
Specification of Drilling Pipe Screen:
a. Material: 304 & 316 stainless
b. Perforation: 3/16 hole on 5/16 stagger
c. Retrievable with standard overshot
d. Interchangeable ring flanges
e. 33% open area perforation
f. Internal wear distribution sleeve
g. Full length safety retaining rod
Casing and tubing coupling bucking unit is widely applicable for casing and tubing manufacturing, and oil field service. Among which the TJA series is the most representive casing and tubing making equipment with most mature technology and most advanced structure. The bucking unit follows API tubing thread connection requirements, especially suitable for screwin screwout of multiple kinds of coupling. Never-stick gripping mechanism and precise torque-control system provide whole computer moninor during screwing process. Manual, semi-automatic, fully automatic are available, and features large range, high torque, long service life and safe and reliable. The product has awarded national invention patent.
A mud cleaner is a combination of desanders and/or desilters mounted over a shaker with a fine mesh screen. A mud is fed to the inlet of the hydrocyclone (desander and/or desilter) to separate particles and the underflow passes to the fine screen mesh where in particles larger than barite are discarded and thrown away. In most drilling operations, a mud cleaner is installed in its mud systems. It is usually located in a mud tank in the same location as with the desilters.
1. About the Manual
The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over).
2.Description of downhole motor
1.The down-hole drill motor is a kind of downhole drill tool driven by mud.
2.As mud fluid from the mud pump enters the motor via the bypass valve, a certain pressure difference is formed at the inlet and outlet of the motor, pushing the rotor to rotate. Torque and rotate speed are transferred via the cardan shaft and the driving shaft to the bit.
3. Performance of the down-hole drill motor depends mainly on performance parameters of the screw motor.
4.This product uses the high and new technology of coating to avoid coating off of rotors resulted from the
traditional technology. Its strength and life are greatly improved.
5.It is applicable to directional drilling,horizontal drilling, composite drilling, cluster wells, sidetrack wells and well
workover etc.
3. Advantage of downhole motor
Increased rate of penetration.
Better hole deviation control.
Reduction in drill string failure rate.
Reduction in wear and tear of the swivel, Kelly, and rotary drives.
Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
1. About the Manual
The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over).
2.Description of downhole motor
1.The down-hole drill motor is a kind of downhole drill tool driven by mud.
2.As mud fluid from the mud pump enters the motor via the bypass valve, a certain pressure difference is formed at the inlet and outlet of the motor, pushing the rotor to rotate. Torque and rotate speed are transferred via the cardan shaft and the driving shaft to the bit.
3. Performance of the down-hole drill motor depends mainly on performance parameters of the screw motor.
4.This product uses the high and new technology of coating to avoid coating off of rotors resulted from the
traditional technology. Its strength and life are greatly improved.
5.It is applicable to directional drilling,horizontal drilling, composite drilling, cluster wells, sidetrack wells and well
workover etc.
3. Advantage of downhole motor
Increased rate of penetration.
Better hole deviation control.
Reduction in drill string failure rate.
Reduction in wear and tear of the swivel, Kelly, and rotary drives.
Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
1.Cutting structure this type TCI tricone bits:
The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit.
2.Gauge structure this type TCI tricone bits:
Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
3.Bearing structure of this type TCI tricone bits:
High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved.
4.Seal and Lubrication of this type TCI tricone bits:
Premium Oring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability .
5.Product Application this type TCI tricone bits:
It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height.
6.Advantage:
1. High-strength, high flexibility, high temperature and high wear resistance.
2. High-precision metal seal.
3. Locking roller ball, to adapt to high-speed.
4. The use of high strength high toughness carbide teeth,
5. Hours in the rotary cone bit with the impact, crushing and shearing the role of broken rock.
6. Cone bit to adapt to the soft, medium and hard of various strata.
7. Reasonable price and long working life.
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable.
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
APPLY TO BELOW BOP:
Brand: HYDRIL , SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type :Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Standard: API Spec 16A,16C
Working pressure:2000psi-15000psi(14 Mpa-105Mpa)
Operating temperature:-18deg--121deg
Bore size:7 1/16"-21 1/4"
Top & nottom connection:Flanged,studded
1. About the Manual
The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over).
2. ADVANTAGES OF DOWNHOLE MOTOR
Increased rate of penetration.
Better hole deviation control.
Reduction in drill string failure rate.
Reduction in wear and tear of the swivel, Kelly, and rotary drives.
Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
3. CONSTITUTION
Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) :
Crossover Sub
Safety Catch Sub
Power Section
Coupling Assembly
Bearing Assembly
Mud motor, Downhole Motor used for HDD machine Rock conditation Drilling, Rock tools
Usage It is one kind of positive displacement downhole motor, with working principle is to convert the high pressure fluid power of mud into mechanical energy for bit rotation. It is widely used in oil field and mine directional well and horizontal well, cluster Wells and vertical Wells, drilling, deflecting, adjusting azimuth, coring, reaming, side tracking and workover treatment, and also applied in some special operations as compound drilling and traversing, etc.
A Variof Types &ety the Capabilities In accordance with the actual drilling needs, we push out high, midiem and low speed downhole motors, of a variety of types with different functional configuration and application for all working conditions.
1. Bit Breakers
The Bit Breakers are suitable to make up or break out the drilling bit during the oil well drilling and repairing operations. The Users should be chosen the bit breaker according to the size and model of the drilling bit.
Feature:Improve support and retention
Advantage:Manage the magnitude cutter loading and bit torque
Benefit:Improved bit durability and directional responsiveness
Advantage:Higher nozzle counts and/or fixed ports to best serve cleaning,cooling and cuttings evacuation requirements with available hydraulic flows.Allow for higher flow rates with minimal increase in pump pressure.
2. Detailed introduction to Bit breaker
1) Bit breaker is mainly used to screw on or off a rock bit to the bottom of drill string.
2) It can also prevent the rock bit from dropping into well hole.
3) The price of it is cheap and the use of it is safety and reliable.
4) It is easy to operate. First, the bit breaker is placed on well hole and then put the rock bit onto it. Turn it to screw on or off the bit by turnplate.
1. Bit Breakers
The Bit Breakers are suitable to make up or break out the drilling bit during the oil well drilling and repairing operations. The Users should be chosen the bit breaker according to the size and model of the drilling bit.
Feature:Improve support and retention
Advantage:Manage the magnitude cutter loading and bit torque
Benefit:Improved bit durability and directional responsiveness
Advantage:Higher nozzle counts and/or fixed ports to best serve cleaning,cooling and cuttings evacuation requirements with available hydraulic flows.Allow for higher flow rates with minimal increase in pump pressure.
2. Detailed introduction to Bit breaker
1) Bit breaker is mainly used to screw on or off a rock bit to the bottom of drill string.
2) It can also prevent the rock bit from dropping into well hole.
3) The price of it is cheap and the use of it is safety and reliable.
4) It is easy to operate. First, the bit breaker is placed on well hole and then put the rock bit onto it. Turn it to screw on or off the bit by turnplate.
1. About the Manual
The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over).
2.Description of downhole motor
1.The down-hole drill motor is a kind of downhole drill tool driven by mud.
2.As mud fluid from the mud pump enters the motor via the bypass valve, a certain pressure difference is formed at the inlet and outlet of the motor, pushing the rotor to rotate. Torque and rotate speed are transferred via the cardan shaft and the driving shaft to the bit.
3. Performance of the down-hole drill motor depends mainly on performance parameters of the screw motor.
4.This product uses the high and new technology of coating to avoid coating off of rotors resulted from the
traditional technology. Its strength and life are greatly improved.
5.It is applicable to directional drilling,horizontal drilling, composite drilling, cluster wells, sidetrack wells and well
workover etc.
3. Advantage of downhole motor
Increased rate of penetration.
Better hole deviation control.
Reduction in drill string failure rate.
Reduction in wear and tear of the swivel, Kelly, and rotary drives.
Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
Model SLX side door elevators with square shoulder are suitable for handling tubing, casing, drill pipes and drill collars in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API 8A/8C Specification for drilling and production hoisting equipment.
1. Product performance standards: API 8A and SY / T5235.
2. Environmental conditions used Sucker Rod Elevator
a) Allows the use at a temperature of -18 â?? ~ 70 â??.
b) Meet the harsh conditions of oil field operations.
3. Sucker Rod Elevator's types: reed.
4. Material requirements: kava body is made of high-quality high-strength steel, handles made of high quality alloy forged steel.
5. Sucker Rod Elevator main technical parameters:
a) Applicable rod outer diameter: 5 / 8in ~ 1 1 / 8in.
b) Maximum load: 15t (135kN), 25t (225kN).
6. Sucker Rod Elevator major quality control requirements:
1) the chemical composition of each batch of material compliance with the relevant standards.
2) Body 10% radiographic flaw detection, high stress area to meet the requirements of grade â?¡ GB / T5677, the remaining parts of the meet GB â?¢ level requirements / T5677's.
3) Mechanical Properties Body of not less than: Rmâ?¥640 PMa, RP0.2â?¥540 PMa, Zâ?¥15%, Aâ?¥25%,AKVâ?¥42J (-20 â??).
4) product 10% for 1.5 times the testimony load test.
5) All parts for magnetic particle testing, high stress area to meet the requirements of grade â?¡ GB / T9444, the remaining parts of the meet GB â?¢ level requirements / T9444's.
6) The main products from raw materials to the carrier using the site dating back the whole process.
7. Sucker Rod Elevator structure diagram and parts list below:
CDQ (S) Sucker Rod Elevator structure diagram.
Model SLX side door elevators with square shoulder are suitable for handling tubing, casing, drill pipes and drill collars in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API 8A/8C Specification for drilling and production hoisting equipment.
Model SLX side door elevators with square shoulder are suitable for handling tubing, casing, drill pipes and drill collars in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API 8A/8C Specification for drilling and production hoisting equipment.
Module is made from 4135 alloy steel with strict forging and heat treatment process, or Ceramic Zirconia and Aluminium Oxide
Mud pump fluid end parts offer full lines of Cylinder Head, Valve Lock Cover, Valve Assy, Cylinder Head Threaded Ring, Cylinder head Plug, Valve Cover Plug, Upper Valve Guide, Lower Valve Guide, Liner Threaded Ring, Liner Lock, Wear Plate and much more.
Three types of Liner High chrome sleeve, single shell, zirconia ceremic liner.
Pony rod and piston rod is made of premium quality, heat treated alloy steel.
Valve and seat assembly are made of forged alloy steel with deep carburized wear surface. We offer a full range of valves and seats which include full open valve and seat, 3 web 4 web design valve and seat .
Contact Information
1).size: 2'', 3'', 4''
2).working pressure:6000-20000psi(42Mpa-140Mpa)
3).working temperature: -29�°C~121�°C.
4).application enrvironment: standard or H2S
5).Standard: API standard
1 Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA.
2 Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa).
3 We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space.
4 Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load.
5 All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment.
6 Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced.
7 Usually good lubrication can ensure that swivel joints work normally without much maintenance.
Product Main Material:
Steel, HDPE
Quality Control:
Follow the API Q1 quality inspectionstandard. Base on the API 5CT Annex I when design the product.
Applications:
Products are the required parts for oildrill pipes and drill color that can protect the thread of each side of pipe.Mainly Thread protectors can prevent your connector threads and pipe end fromdamaging during handling, transportation and storage.
1.Standard Fishing Magnet:
Fishing Magnet is a junk retrieval tool designed to retrieve small metal, oddly-shaped objects such as milling shavings, bit cones, cutters, bearings, slips, tong pins, and hand tools from the bottom of the hole. Typically,these objects are the result of bit failures, an accumulation of mill cuttings, or simply accidental droppings of unmillable objects. In almost all of these cases, the fish cannot be engaged in the normal manner. Fishing magnets can successfully remove these objects from the hole. The toolâ??s design features generous circulation ports that wash away cuttings and other debris that might interfere with or prevent contact with the magnet. A variety of guides are available to accommodate any retrieval situation.
Construction:
The Fishing Magnet Assembly consists of top sub, housing, magnet element, pole plate, and standard flush guide. The body is manufactured from high strength alloy steel. The magnet element is a powerful permanent magnet. Used properly, it will never lose its charge. The magnet body, housing, and pole plate are threaded and welded together during assembly with the magnet element in place.The standard flush bottom guide is threaded and easily removed.
Operation:
Fishing Magnets are usually run on tubing or drill pipe, but can be run on wireline. Wireline adapters are available. The TOPMAG Fishing Magnet is made up to the bottom of the fishing string and lowered into the hole to within six to twelve inches of the fish. Circulate to wash the fish. Reduce circulation and lower the fishing magnet to the fish. Slowly rotate to ensure positive contact. Discontinue circulation and lift the fishing magnet from the hole.
2. Reverse Circulation Fishing Magnet:
Reverse Circulation Fishing Magnet is a new fishing tool based on TOPMAG Standard Fishing Magnet. It combines advantages of Reverse Circulation Fishing Basket and Fishing Magnet. Its unique reverse-circulation design brings better performance on cleaning bottom hole.
Construction:
Reverse Circulation Fishing Magnet Assembly consists of lifting bail, top sub, housing, magnet element, pole plate, standard flush guide, and steel ball. When using we can select an appropriate guide.
1.Standard Fishing Magnet:
Fishing Magnet is a junk retrieval tool designed to retrieve small metal, oddly-shaped objects such as milling shavings, bit cones, cutters, bearings, slips, tong pins, and hand tools from the bottom of the hole. Typically,these objects are the result of bit failures, an accumulation of mill cuttings, or simply accidental droppings of unmillable objects. In almost all of these cases, the fish cannot be engaged in the normal manner. Fishing magnets can successfully remove these objects from the hole. The toolâ??s design features generous circulation ports that wash away cuttings and other debris that might interfere with or prevent contact with the magnet. A variety of guides are available to accommodate any retrieval situation.
2. Reverse Circulation Fishing Magnet:
Reverse Circulation Fishing Magnet is a new fishing tool based on TOPMAG Standard Fishing Magnet. It combines advantages of Reverse Circulation Fishing Basket and Fishing Magnet. Its unique reverse-circulation design brings better performance on cleaning bottom hole.
Releasing and Circulating Overshot
1) Delivery on time
2) Standard export package
3) API-7-1 Standard
LAKE LT Overshot is one of the fishing tools which is fishing the pipes externally. It can catch drill collar, drill pipe, tubing, subs and other pipes. Because of the seals,the fluid can circulate with the high pump pressure after catching the fish. The top of the fish will be milled by under mill shoe. It can also work with jars to catch the stuck fishes. If the catched fish can't be release from stucking, we should release the overshot and lifting the drill string.
Double studded adapter flange is a combination of flanges of different sizes and pressure ratings. DSA for reliable and consistent performance on their production system. Our
adapter flanges are in various sizes and pressure ratings as per customer's specified thickness, consistent with design considerations. It is the important device to connection the different flange for wellhead, so the material of the body and studs and nuts shall be conforms the related requirements. The size is in accordance with API 16A flange certification.
1.High corrosion resistance
2.Strong bearing,Light weight
3.Easy installation
4.Excellent fatigue durability
5.Plastic pipes
Features:
1. High corrosion resistance
2. Excellent fatigue durability, more than 30 years design service life
3.Strong bearing, high safety coefficient
4. Light weight, easy installation
5. Fine tightness connected with steel pipe
6. No electrical conductivity, smooth internal surface and low friction coefficient improve the efficiency of fluid transport
7. High, middle, low pressure rating satisfy different medium transport
1.High corrosion resistance
2.Strong bearing,Light weight
3.Easy installation
4.Excellent fatigue durability
5.Plastic pipes
Features:
1. High corrosion resistance
2. Excellent fatigue durability, more than 30 years design service life
3.Strong bearing, high safety coefficient
4. Light weight, easy installation
5. Fine tightness connected with steel pipe
6. No electrical conductivity, smooth internal surface and low friction coefficient improve the efficiency of fluid transport
7. High, middle, low pressure rating satisfy different medium transport
1.High corrosion resistance
2.Strong bearing,Light weight
3.Easy installation
4.Excellent fatigue durability
5.Plastic pipes
Features:
1. High corrosion resistance
2. Excellent fatigue durability, more than 30 years design service life
3.Strong bearing, high safety coefficient
4. Light weight, easy installation
5. Fine tightness connected with steel pipe
6. No electrical conductivity, smooth internal surface and low friction coefficient improve the efficiency of fluid transport
7. High, middle, low pressure rating satisfy different medium transport
The Float Collar and Float Shoe is used to guide the casing to be put into the hole. It can adjust the floating power of the casing when the casing been laid in. That can certify the qualification of the cementing. The Float Collars and Float Shoe manufactured by our company use the Spring Driving back-pressure valve type. It has a high reliability.
Shale Shaker Screens are one of the major business for Solids Control. We understand, the cost-effective shale shaker screens are very important for the drilling operations solids control equipment.
So LAKE keeps research and develop the best technology to manufacture top quality shaker screens for our clients.
With our distribution network and cost-effective products, our Shale Shaker Screens are popular around the world.
Screen Type:
1. API RP 13C standard.
2. ASTM standard.
3. MI-Swaco: Replacement Shaker Screen for MI-Swaco MONGOOSE PRO, MONGOOSE PT & MEERKAT,
ALS, BEM, MD-3 series shale shaker or mud cleaner. Available in Steel frame or composite frame.
4. Derrick: Replacement Shaker Screen for Derrick FLC 2000, FLC 500 , DP 600 and Hyperpool series shale
shaker and mud cleaner. Available in flat screen or pyramid screen.
5. NOV Brandt: Replacement Shaker Screen for NOV Brandt Cobra, King Cobra, Mini Cobra, Venom, LCM-2D,
LCM-3D, VSM 300 series and D380/D285P shale shaker and mud cleaner. Available in steel frame
or composite frame.
6. Other: Other replacement shaker screen for Fluids System 29x42, Kemtron/Elgin KPT series and other
shale shaker manufacturer. Customized or OEM Shaker Screens are available.
Specifications:
They are designed and manufactured according to API Spec 7K.
Manual Tongs are necessary tools applied to make up and break out pipes. Changing lug jaws and latch steps can adjust different handling sizes of pipes. They are designed and manufactured according to API Spec 7K.
Product Description
Integral pup joints:
Integral pup joints are made of high quality alloy steel, integrally constructed, forged ended, and features seamless upset construction.
Detachable wing union end connections enable fast, easy make-up and break-out of temporary flow lines.
Eliminates all welds or threads.
Uniform bore for greater flow capacity.
Pup joints are hydrostatically tested at 1.5 times the rated cold working pressure.
Available from 2" to 3" sizes, lengths for pup joints range from 1 feet to 12 feet to 15,000 psi working pressure.
Integral pup joints can be made available with two models, one is plain integral pup joints, another is pup joints with retaining shoulder, integral pup joints with retention shoulder features specially machined shoulder to prevent nut from sliding down pup joints when held vertically.
Pup joints (flowline pipes) are pipe lines with thread, flange or union connectors on both ends, designed to be compatible with FMC Chiksan pup joints and SPM pup joints.Various pup joints are available for high/low pressure and temperature and H2S environment,such as integral pup joints( 10 feet length to handle fluids at cold working pressure), sour gas pup joints, pressure thread seal straight pipes and non-pressure thread seal pup joints.
NPST pup joints:
NPST Pup joints are made of high quality seamless pipeline with male and female detachable Hammer Unions.
Uniform bore for greater flow capacity.
Available from 2" to 3" sizes, lengths for pup joints range from 1 feet to 20 feet to 15,000 psi working pressure.
Butt weld pup joints:
Butt weld Pup joints are made of high quality seamless pipeline with male and female Hammer Unions welded to pup joint pipeline
Detachable wing union end connections enable fast, easy make-up and break-out of temporary flow lines
Pup joints are hydrostatically tested at 1.5 times the rated cold working pressure
Available from 2" to 4" sizes, lengths for pup joints range from 1 feet to 20 feet to 6,000 psi working pressure
Model XQ28/2.6 hydraulic power tong is an improved type of XYQ1.8 which is used to make up and break out sucker rod thread in Well Service. This product has the following features:
A. The structure is compact ,concise and light.Master tong is driven by low speed large torque hydraulic motor which matching with manual control valve. The backup tong just like a spanner. Total weight is approximately equal to XYQ1.8.
B. The operating is briefness and convenience with high efficiency. Put the respondence size jaw set into master tong and the respondence size glutting into backup tong , turning the reset knob in correct direction then can make up and break out sucker rod by operating manual control valve. Two speed,snapping at low speed, spinning at high speed .
C. Large low gear torque, especially suitable for the instance that is difficult to break out sucker rod thread.
Casing and tubing coupling bucking unit is widely applicable for casing and tubing manufacturing, and oil field service. Among which the TJA series is the most representive casing and tubing making equipment with most mature technology and most advanced structure. The bucking unit follows API tubing thread connection requirements, especially suitable for screwin screwout of multiple kinds of coupling. Never-stick gripping mechanism and precise torque-control system provide whole computer moninor during screwing process. Manual, semi-automatic, fully automatic are available, and features large range, high torque, long service life and safe and reliable. The product has awarded national invention patent.
Casing and tubing coupling bucking unit is widely applicable for casing and tubing manufacturing, and oil field service. Among which the TJA series is the most representive casing and tubing making equipment with most mature technology and most advanced structure. The bucking unit follows API tubing thread connection requirements, especially suitable for screwin screwout of multiple kinds of coupling. Never-stick gripping mechanism and precise torque-control system provide whole computer moninor during screwing process. Manual, semi-automatic, fully automatic are available, and features large range, high torque, long service life and safe and reliable. The product has awarded national invention patent.
Specification:
1. The chain encloses the pipe so that the chain shaft enters the bayonet and rotates the handle to rotate the pipe.
2. Protect your life and property, please do not overload it.
3. This product is intended for use only as a rotating pipe, no other purpose.
4. Chain pipe wrenches with specifications of 900mm, 1000mm, 1200mm and 1300mm, the jaws can be rotated 180�° for installation.
5. Please pay attention to rust prevention.
6. Product standard as GB1200 Chain Pipe Wrench.
It is JZ series weight indicator of an important part of, oil, geological exploration rig, workover drilling or workover process, measuring the drill hanging weight and WOB change, an instrument, to help driller master the operating parameters of the rig, workover rig drilling or workover and judgment drilling work status.JZGdead line anchor made of high-quality steel, after 150% overload capacity test. High precision, solid, stable and reliable. Supporting the use of heavy table and the sensor with JZ.
Product Description:
1.Manufacturer
2.Material and specification could be chosen by customer
3.Be available from stock
4.API, TUV...certificate
Hydraulic coupling during operation requiring regular check oil tank, pump suction filter regularly cleaned. The new machine is running the first 500 hours, when the working machine downtime or hydraulic fluid coupling exports decreased to clean the filter removed regularly check the oil, the timely replacement oil.
Casing and tubing coupling bucking unit is widely applicable for casing and tubing manufacturing, and oil field service. Among which the TJA series is the most representive casing and tubing making equipment with most mature technology and most advanced structure. The bucking unit follows API tubing thread connection requirements, especially suitable for screwin screwout of multiple kinds of coupling. Never-stick gripping mechanism and precise torque-control system provide whole computer moninor during screwing process. Manual, semi-automatic, fully automatic are available, and features large range, high torque, long service life and safe and reliable. The product has awarded national invention patent.
Hydraulic coupling during operation requiring regular check oil tank, pump suction filter regularly cleaned. The new machine is running the first 500 hours, when the working machine downtime or hydraulic fluid coupling exports decreased to clean the filter removed regularly check the oil, the timely replacement oil.
Hydraulic coupling during operation requiring regular check oil tank, pump suction filter regularly cleaned. The new machine is running the first 500 hours, when the working machine downtime or hydraulic fluid coupling exports decreased to clean the filter removed regularly check the oil, the timely replacement oil.
Specification:
We are producing vavious custom Zirconia Ceramic Liner ceramic sleeve for pump which is high temperature resistant tubes .
Zirconia Ceramic liner Ceramic Sleeve for pump have exceptional hardness and strength, resistance to chemical attack and wear, low dielectric loss and excellent electrical insulation properties. Additionally, Alumina can be metallized for brazing to other metals, highly polished, and comes in a variety of purities depending on it use. Due to these outstanding properties ceramic Alumina tubes are used in a wide range of industrial and advanced applications.
Zirconia Ceramic Liner Ceramic Sleeve for pump exhibits high hardness, good abrasion resistance, high strength, and stability. These products are developed incorporating sophisticated technology and are made available to patrons at market leading prices.
Zirconia Ceramic Liner ceramic sleeve for pump is a unique advanced ceramic. Products manufactured from alumina ceramic exhibit superior mechanical properties such as high strength and flexibility. Heat insulating properties and oxygen-ion conductivity indicate zirconia has potential for use in a wide variety of applications - everything from telecommunications to the new energy of the future and environmentally beneficial products.
Depending on doping material different material properties could be achieved because of influencing the Yttria's microstructure. The "Ceramic Steel" titled Zirconia is doped with Yttria forming an ultra-fine ductile structure with sub-micron grain formation leading to enormous bending strengths. Magnesia doped qualities are less strong also showing a coarser microstructure.
Advantages:
1. Excellent insulation, security, long working life.
2. High temperature resistance.
3. Resistance to electric breakdown.
4. Stand wear and tear.
5. High strength.
6. Corrosion resistance.
7. Good compactness.
8. HIgh hardness.
Lakes mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc.
The outer sleeve of Rundongâ??s bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields.
Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the liners flexural strength() is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.
The basic principle of the hydrocyclone is to separate the two-phase or multi-phase mixture of liquid-liquid, liquid-solid, liquid-gas and so on with a certain density difference under the action of centrifugal force. The mixed liquid is tangentially flowed into the cyclone with a certain pressure, and a high-speed rotating flow field is generated in the cylindrical cavity. The high density components in the mixture under the action of the swirling flow at the same time along the axial downward movement along the radial outward movement in the reach of the cone down along the wall along the wall, and from the bottom outlet, thus forming The small vortex component moves toward the central axis and forms an upwardly moving internal vortex in the center of the axis, and then is discharged from the overflow port, thus achieving the purpose of two-phase separation.
Polyurethane characteristics:
1, the hardness range is wide, and the elongation and elasticity of the rubber are still under high hardness. The hardness range of polyurethane board is Shao A10-D80.
2, high strength. In rubber hardness under their tensile strength, tear strength and bearing capacity rubber is much higher than general. Under the high hardness the impact strength and flexural strength and is much higher than that of plastic.
3, wear resistance. The wear resistance is very good, about 3-5 times of the rubber.
4, oil resistance. Polyurethane board is a strong polar polymer, and the affinity of non polar mineral oil, in fuel oil and mechanical oil is almost no corrosion.
5, good resistance to oxygen and ozone.
6, excellent absorption performance, can be used to reduce the vibration, buffer effect. In the mold manufacturing industry, alternative rubber and spring.
7, it has good low temperature performance.
8, radiation resistance, high energy - ray properties of the polyurethane, the use of the 10-10 radiation dose is still satisfactory.
9, have good mechanical processing performance. (car, milling, grinding, drilling can be)
Application: widely used in machinery, transportation, oil, mining, construction, textile, sports and other fields.
The company to undertake a variety of specifications of the size of polyurethane products custom processing.
Lake Petro supplies forged and casted steel pulsation dampeners which are inter-changeable and compatible with:
Hydril series "K" dampeners
Emsco series "PD" dampeners
Bomco series "KB" dampeners
These units are dependable and reliable with API connections
K-10,3000 psi, K-10,5000 psi, K-20, 5000 psi, K-20, 7500 psi, KB-45, 5000 psi, KB-75, 5000 psi, PD-45, 5000 psi, PD-55, 5000 psi
Description:
F1600 pump unit is used for transporting high viscosity, large proportion, higher sediment concentration
Drilling fluid to the well bottom in high pressure, for cooling the bit, wash the bottom, break the rock, and
Carry out rock cutting when return from the well bottom. It is one the main process equipment of oil drilling
Operation.
F1600 electric pump unit is consist of mud pump, dc motor, small base, big base, belt transmission system, spray system, pressure relief manifold and charging system etc. Dc motor is installed on independent skid, and fixed integrally on the big base behind the f1600 pump. Motor power is transmitted to mud pump from input shaft by belt, then drive the mud pump. Small base is equipped with a regulating screw, which can adjust the elasticity of belt. The matching electric spray pump is used to cool hydraulic end piston, cylinder liner, thus to make sure they work properly.
Api standard
F1600 pump unit meets the requirements of api 7k drilling and wellhead equipment
Operation specifications and sy/ t5138 standards.
Lake can supply the NOV Mission Magnum, Sandmaster and XP types centrifugal pumps, can interchange 100% with original!
It is ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive. An excellent choice for high volume mobile and stationary applications where a small footprint is critical. The low stuffing box pressure can increase seal life approximately 50%. The extra-heavy shaft is designed for minimum deflection. The heavy duty bearings are permanently lubricated to minimize maintenance.
How to contact with us:
Lake can supply the NOV Mission Magnum, Sandmaster and XP types centrifugal pumps, can interchange 100% with original!
It is ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive. An excellent choice for high volume mobile and stationary applications where a small footprint is critical. The low stuffing box pressure can increase seal life approximately 50%. The extra-heavy shaft is designed for minimum deflection. The heavy duty bearings are permanently lubricated to minimize maintenance.
Product Description:
The Products can be supplied:
1. Mud Pump:
8P-80, 9P-100, 10P-130, 12P-160, F-500, F-800, F-1000, F-1300, F-1600, PZ-7, PZ-9, PAH, TEE, W-440, W-446, 3NB350, 3NB-500C, 3NB-800C, 3NB-1000C, 3NB-1300C, 3NB-1600
2.Plunger Pump:
TWS600S, TWS2000, DOWILL300, HyT-400.
2. Skid- mounted & Pump Unit for each kinds of pump said above.
4. Spare Parts and Expendable parts: With the specialized & batched production liner, we can supply power end assembly, fluid end assembly and its spare parts, which can be easily matched & exchanged with some international famous mud pump brand.
The fracturing pump fluid end blocks and spares are 100% interchangeable to BJ, Gardner Denver, Halliburton, Serva, FMC.
We can supply the Spare Parts for the Pump Models as follow:
HQ 1400 4â?? fracturing pump SPM2000-5" fluid end
HQ-1400/2000 Frac Pump Fluid End Asembly
SPM-TWS 600 Triplex Plunger Pump
SPM QWS2500 Quintuplex Plunger Pump Compatible
TWS-2000/2250 Frac Pump Fluid End Assembly
Halliburton HT400 plunger pump
Serva TPA600 pump SERVA pump: TPA-400 plunger pump . TPA-600 plunger pump. TPB-600 plunger pump. TPA-400 plunger pump
GD-2500 Quintuplex Plunger Pump Compatible
OPI 1800AWS Frac Pump Compatible
Comparing with conventional tubing pump, sucker rod pump has better performance in corrosion resistance & anti-friction aspect. Plunger of it is nickel plated on alloy base, inside wall of barrel is plated with hard cadmium, key parts, such as valve hood, valve ball, are made of materials with excellent mechanical performance and corrosion resistant property. Compared with conventional pump, the series of pump has a longer working life.
The pump adopts two pumps in series with different diameters to form a double-pump and single-action pump. During the operation, the upper and lower pumps suck and drain liquid simultaneously. The tail pipe is connected under the pump and a packer is installed between the tail pipe and the casing to separate the upper and lower oil level to realize separate layer production, which avoids the inference of layer difference and improves the pumping efficiency.
Product Description:
API-RHAM, Rod, Stationary Heavy Wall Barrel, Mechanical Top Anchor Pump
API-RHAC, Rod, Stationary Heavy Wall Barrel, Cup Top Anchor Pump
API-RHBM, Rod, Stationary Heavy Wall Barrel, Mechanical Bottom Anchor Pump
API-RHBC, Rod, Stationary Heavy Wall Barrel, Cup Bottom Anchor Pump
API-RWAM, Rod, Stationary Thin Wall Barrel, Mechanical Top Anchor Pump
API-RWAC, Rod, Stationary Thin Wall Barrel, Cup Top Anchor Pump
API-RWBM, Rod, Stationary Thin Wall Barrel, Mechanical Bottom Anchor Pump
API-RWBC, Rod, Stationary Thin Wall Barrel, Cup Bottom Anchor Pump
API-RHBM-AC, Rod, Stationary Heavy Wall Barrel, Mechanical Bottom Anchor And Cup Top Anchor Pump
Sucker rod pump is equipped with a seating nipple(there are two seating nipples in API-RHBM-AC) , seating nipple connection is on the tubing string, down to the bottom of the well with the tubing string. Plunger assembly connection is on the sucker rod string and with the pump overall down to seating nipple position together , pump with fixed inside the seating nipple.Plunger assembly with the sucker rod string up and down reciprocating movement to achieve pumping work.
If the pump meet quality problem, it needn't to put forward the tubing string, only need to put the whole pump forward well through the sucker rod string together , operation is simple.
Main parts process and material:
Pump barrel: plain carbon steel plating (A1), ordinary carbon steel carbonitriding (B1), ordinary carbon steel carburizing (B2), low alloy steel nitride (B5).
Plunger: 1045 steel spraying (B1), 1045 steel spraying (B2), 1045 steel chrome plating (A1), 1045 steel double chrome plating (A2).
Valve ball and seat: stainless steel (A1), cobalt chromium (B2), tungsten carbide (C1), nickel and carbon compounds (C2), titanium carbide (C3).
Other accessories: plain carbon steel, low alloy steel, stainless steel, brass and other materials.
Specification:
We are producing vavious custom Zirconia Ceramic Liner ceramic sleeve for pump which is high temperature resistant tubes .
Zirconia Ceramic liner Ceramic Sleeve for pump have exceptional hardness and strength, resistance to chemical attack and wear, low dielectric loss and excellent electrical insulation properties. Additionally, Alumina can be metallized for brazing to other metals, highly polished, and comes in a variety of purities depending on it use. Due to these outstanding properties ceramic Alumina tubes are used in a wide range of industrial and advanced applications.
Zirconia Ceramic Liner Ceramic Sleeve for pump exhibits high hardness, good abrasion resistance, high strength, and stability. These products are developed incorporating sophisticated technology and are made available to patrons at market leading prices.
Zirconia Ceramic Liner ceramic sleeve for pump is a unique advanced ceramic. Products manufactured from alumina ceramic exhibit superior mechanical properties such as high strength and flexibility. Heat insulating properties and oxygen-ion conductivity indicate zirconia has potential for use in a wide variety of applications - everything from telecommunications to the new energy of the future and environmentally beneficial products.
Depending on doping material different material properties could be achieved because of influencing the Yttria's microstructure. The "Ceramic Steel" titled Zirconia is doped with Yttria forming an ultra-fine ductile structure with sub-micron grain formation leading to enormous bending strengths. Magnesia doped qualities are less strong also showing a coarser microstructure.
Advantages:
1. Excellent insulation, security, long working life.
2. High temperature resistance.
3. Resistance to electric breakdown.
4. Stand wear and tear.
5. High strength.
6. Corrosion resistance.
7. Good compactness.
8. HIgh hardness.
1. Module is made from 4135 alloy steel with strict forging and heat treatment process. 2. Mud pump fluid end parts offer full lines of Cylinder Head, Valve Lock Cover, Cylinder Head Threaded Ring, Cylinder head Plug, Valve Cover Plug, Upper Valve Guide, Lower Valve Guide, Liner Threaded Ring, Liner Lock, Wear Plate and much more.
3. Three types of Liner:High chrome sleeve/single shell/zirconia ceremic liner.
4.Pony rod and piston rod is made of premium quality,heat treated alloy steel.
5.Valve and seat assembly are made of forged alloy steel with deep carburized wear surface. We offer a full range of valves and seats which include full open valve and seat, 3 web / 4 web design valve and seat .
Our main products :
1.Fluid End Pump Parts:Liners,Piston Rod and Pony Rod,Piston and Hubs,Fluid End Modules
and Accessories, Valve and Seat for all major brand mud pumps.
2.Mud Pump: EMSCO,3NB
3.OCTG Production Equipment: Hydro-Tester, Lengthening Weighing & Marking Equipments
Coupling Application Machine etc.
4.We also offer custom design-built service per our clientâ??s drawings and specifications.
-
We can supply many spare parts of slurry pump. OEM pump part is welcome.
Material options:
-High Chrome alloy
-Grey Iron
-Cast Iron
-Rubber
-Polyurethane
-OEM Pump Parts:
Metal impeller is made of high chrome alloy, SA05,SA49, anti-abrasive, SA33 anti-corrosive
Rubber impeller is made of SR26,SR55, SR33
Polyurethane material is available.
Brief introduction:
-Spare parts in anti-abrasion high chrome cast iron alloy.
-Largest weight of single workpiece can be 13t.
-Largest outside diameter of workpiece can be 5m
-Manufacture other mechanical parts according to your drawing.
-
Waste vacuum pump, also named as solids transfer pump. It is a pneumatic slurry transfer vacuum pump for liquid, slurry, and solids transfer. With special structure design, it can be used at tough environmental for solids transfer, high working performance and less maintenance. The pump can transfer material with high gravity and high density, solids content max. up to 80%.
Material transfer applications:
Waste mud and waste solids discharged from shale shaker, mud cleaner and centrifuge transfer
Drilling mud transfer
Waste pit cleaning
Hazardous waste recovery
Oil sludge, tank bottoms residual removal and transfer
Barge holdings and vessel bottom clean out
Bulk tank and silo transfer of material
Sand; Course, fine, conventional and frac sand
Diatomaceous earth
Animal waste etc.
Summary:
The SB family of pumps is designed and engineered to handle abrasive, viscous and corrosive fluids in drilling fluid or industrial slurry applications. The pump performance is matched by exceptional performance, high volume, high temperature capabilities, long service life, ease to maintenance, overall economy and greater savings. SB centrifugal pumps are currently in operation on land-based and offshore drilling rigs around the world. We will offer the best choice for the intended application, taking into consideration fluid conditions.
Applications:
Drilling applications:
Mud mixing and shearing operations, desanding and desilting, degassing, supercharging, centrifugal feed, mud cooling towers, wash down.
Others
Chemical, refinery, industrial, construction and agricultural applications.
Working conditions:
(Outlet):DN=2â?³~6â?³
(Flow):Q=20~400m3/h
(Head):H=12~62m
(Working temperature):T=-40°C~60°C
Please contact with us to meet you various demands.
Explanation of model:
SB 6 Ã? 5 11
Impeller Dia(inches)
Pump outlet Dia(inches)
Pump inlet Dia(inches)
Sand pump
Lake can supply the NOV Mission Magnum, Sandmaster and XP types centrifugal pumps, can interchange 100% with original!
It is ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive. An excellent choice for high volume mobile and stationary applications where a small footprint is critical. The low stuffing box pressure can increase seal life approximately 50%. The extra-heavy shaft is designed for minimum deflection. The heavy duty bearings are permanently lubricated to minimize maintenance.
We can supply many spare parts of slurry pump. OEM pump part is welcome.
Material options:
-High Chrome alloy
-Grey Iron
-Cast Iron
-Rubber
-Polyurethane
-OEM Pump Parts:
Metal impeller is made of high chrome alloy, SA05,SA49, anti-abrasive, SA33 anti-corrosive
Rubber impeller is made of SR26,SR55, SR33
Polyurethane material is available.
Brief introduction:
-Spare parts in anti-abrasion high chrome cast iron alloy.
-Largest weight of single workpiece can be 13t.
-Largest outside diameter of workpiece can be 5m
-Manufacture other mechanical parts according to your drawing.
The fracturing pump fluid end blocks and spares are 100% interchangeable to BJ, Gardner Denver, Halliburton, Serva, FMC.
We can supply the Spare Parts for the Pump Models as follow:
HQ 1400 4â?? fracturing pump SPM2000-5" fluid end
HQ-1400/2000 Frac Pump Fluid End Asembly
SPM-TWS 600 Triplex Plunger Pump
SPM QWS2500 Quintuplex Plunger Pump Compatible
TWS-2000/2250 Frac Pump Fluid End Assembly
Halliburton HT400 plunger pump
Serva TPA600 pump SERVA pump: TPA-400 plunger pump . TPA-600 plunger pump. TPB-600 plunger pump. TPA-400 plunger pump
GD-2500 Quintuplex Plunger Pump Compatible
OPI 1800AWS Frac Pump Compatible
1. Module is made from 4135 alloy steel with strict forging and heat treatment process, or Ceramic (Zirconia and Aluminium Oxide).
2. Mud pump fluid end parts offer full lines of Cylinder Head, Valve Lock Cover, Valve Assy, Cylinder Head Threaded Ring, Cylinder head Plug, Valve Cover Plug, Upper Valve Guide, Lower Valve Guide, Liner Threaded Ring, Liner Lock, Wear Plate and much more.
3. Three types of Liner: High chrome sleeve, single shell, zirconia ceremic liner.
4. Pony rod and piston rod is made of premium quality, heat treated alloy steel.
5. Valve and seat assembly are made of forged alloy steel with deep carburized wear surface. We offer a full range of valves and seats which include full open valve and seat, 3 web / 4 web design valve and seat .
Lake Petro supplies forged and casted steel pulsation dampeners which are inter-changeable and compatible with:
Hydril series "K" dampeners
Emsco series "PD" dampeners
Bomco series "KB" dampeners
These units are dependable and reliable with API connections
K-10,3000 psi, K-10,5000 psi, K-20, 5000 psi, K-20, 7500 psi, KB-45, 5000 psi, KB-75, 5000 psi, PD-45, 5000 psi, PD-55, 5000 psi
Lakes mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc.
The outer sleeve of Rundongs bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields.
Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the liners flexural strength() is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.
Waste vacuum pump, also named as solids transfer pump. It is a pneumatic slurry transfer vacuum pump for liquid, slurry, and solids transfer. With special structure design, it can be used at tough environmental for solids transfer, high working performance and less maintenance. The pump can transfer material with high gravity and high density, solids content max. up to 80%.
Material transfer applications:
Waste mud and waste solids discharged from shale shaker, mud cleaner and centrifuge transfer
Drilling mud transfer
Waste pit cleaning
Hazardous waste recovery
Oil sludge, tank bottoms residual removal and transfer
Barge holdings and vessel bottom clean out
Bulk tank and silo transfer of material
Sand; Course, fine, conventional and frac sand
Diatomaceous earth
Animal waste etc.
Air operated thread protector is also called Inflatable thread protector. It is used to protect the outer thread of casing and tubing pipe. Its outstanding feature is that its gas nozzle is manufactured on the facade, which can protect the gas nozzle in the pipes loading, unloading and transportation process. The gas nozzle of dismountable inflatable thread protector is on the side, which may damage the gas nozzle. Inflatable thread protector is made from polyurethane containing a stainless steel ring in it, so integral inflatable thread protector is resistant to corrosion, abrasion and oil. It has many advantages, such as fast inflation, easy operation, good air-tightness, lowering consumption and cost. Besides, it can be repeatedly used.
Features:
The Air operated Thread Protectors provide a 360�° grip with greater, evenly divided holding power. - Durability is enhanced because the outside of the protectors does not change; only the inside inflates to provide a better grip on the pin.
-Absence of moving parts, metal clamping bars, or other mechanisms provides a long and virtually maintenance-free life cycle.
-The bottom of each protector contains a rugged buffer.
-Air operated thread protectors provide firm attachment to all thread types for greater operational flexibility.
-Rugged construction makes this protectors resistant to high temperatures and rough handling for a long life cycle.
-Pressurization by air facilitates installation and release for operational efficiency.
How to contact us?
We produce all kinds of mud pump parts such as Crosshead, Crosshead pin, Crosshead extension rod, Cylinder cover, Cylinder cover flange, Cylinder liner flange, Cylinder head plug, Liner wear ring, Discharge filter screen, Piston draw rod, End cover, Stuffing box, Clamp assembly, Ejector, Spacer, Guide plate, Valve cover, Crankshaft, Pinion shaft, JA-3 Relief Valve, etc.
Our company also own pump accossories warehouse and product center for all type of HT300, HT400, HT600, 900, 1800, 2500 plunger pump with high quality and enough storage.
The fracturing pump fluid end blocks and spares are 100% interchangeable to BJ, Gardner Denver, Halliburton, Serva, FMC.
We can supply the Spare Parts for the Pump Models as follow:
HQ 1400 4 fracturing pump SPM2000-5" fluid end
HQ-1400/2000 Frac Pump Fluid End Asembly
SPM-TWS 600 Triplex Plunger Pump
SPM QWS2500 Quintuplex Plunger Pump Compatible
TWS-2000/2250 Frac Pump Fluid End Assembly
Halliburton HT400 plunger pump
Serva TPA600 pump SERVA pump: TPA-400 plunger pump . TPA-600 plunger pump. TPB-600 plunger pump. TPA-400 plunger pump
GD-2500 Quintuplex Plunger Pump Compatible
OPI 1800AWS Frac Pump Compatible
Waste vacuum pump, also named as solids transfer pump. It is a pneumatic slurry transfer vacuum pump for liquid, slurry, and solids transfer. With special structure design, it can be used at tough environmental for solids transfer, high working performance and less maintenance. The pump can transfer material with high gravity and high density, solids content max. up to 80%.
How to contact us?
We can supply many spare parts of slurry pump. OEM pump part is welcome.
Material options:
-High Chrome alloy
-Grey Iron
-Cast Iron
-Rubber
-Polyurethane
-OEM Pump Parts:
Metal impeller is made of high chrome alloy, SA05,SA49, anti-abrasive, SA33 anti-corrosive
Rubber impeller is made of SR26,SR55, SR33
Polyurethane material is available.
Brief introduction:
-Spare parts in anti-abrasion high chrome cast iron alloy.
-Largest weight of single workpiece can be 13t.
-Largest outside diameter of workpiece can be 5m
-Manufacture other mechanical parts according to your drawing.
1.API F 1000 triplex mud pump
2.Emsco mud pump
3.Mud pump with ISO9001:2008 certification
4.Precise designed mud pump
1.API triplex mud pump
2.Emsco mud pump
3.Mud pump with ISO9001:2008 certification
4.Precise designed mud pump
F-1000 Triplex drilling Mud pump
LW means horizontal spiral type which is a normal model of decanting centrifuge Solids. Decanter Centrifuge is the last stage equipment in drilling mud system for solids control and mud cleaning. The superiority of Decanting Centrifuge is embodied in the solids processing size. Decanter Centrifuge could remove the solid particles with size 2-7 microns using the principle of centrifugal action, it is an ideal choice for separating particles in drilling mud. Always there is a screw pump or submersible pump to feed the mud to Decanter Centrifuge. After the drilling fluids being fed into the centrifuge drum, under the function of centrifugal force, solid phase particles are pushed to the internal wall of the drum, then to the solid discharge export of the small end of the drum and excreted. While the fluids is excreted from the overflow hole of the large end. Such cycle is to achieve the purpose of continuous separation. High speed decanting centrifuge are more effective for separation of fine solids.
Air bag assembly is a part of mud pump, used as pressure balance on mud pump, the max pressure is 5000psi. It is forged by high quality alloy steel 35CrMo or 40CrMnMo, which holding high machinery performance and sprying technology.We can manufacture it used on almost all types of mud pumps or customize in accordance with your request.
features:
1. Pulsation Dampener are forged with 4130 Low-Temperature Resistance Alloy Steel
2. Pulsation Dampener has precise inside chamber size with surface roughness 6.3, increase the life span of the bladder.
3. Available in various materials to meet a wide range of applications
4. We have 7 national patents. We are going to build a complete customer service system, set up a Houston, TX based warehouse for various of expendables.
WIRELINE FLOW TUBES are critical components of the GreaseInjection Control Head. It is absolutely essential that WIRELINE FLOW TUBES are changed frequently in order to properly contain well pressure as the wireline is raisedand lowered into the well bore.We offer a full range of WIRELINE FLOW TUBES at very attractive prices.We invite your direct requests and assure you of our best prices and delivery anywherein the world to meet your requirements.
Tubes with a diameter slightly larger than the braded wireline or slick line that are used in the stuffing box on a wireline intervention to isolate the well pressure and fluid from the atmosphere. They work in combination with oil or wireline grease injection to form a hydraulic seal.
Tubes with a diameter slightly larger than the braded wireline or slick line that are used in the stuffing box on a wireline intervention to isolate the well pressure and fluid from the atmosphere. They work in combination with oil or wireline grease injection to form a hydraulic seal.
It is absolutely essential that WIRELINE FLOW TUBES arechanged frequently in order to properly contain well pressure as the wireline is raisedand lowered into the well bore.
Product Description:
Lake Petro provides API 6A standard Plug Valve with standard Male and Female end connections, and a standard service rating up to 15000psi NSCWP. Plug valve provides flow control for oilfield applications such as cementing, fracturing, aciding, coiled tubing, sand control, and manifold trailers. Manual and Hydraulic operation available for standard and sour gas application. To meet the level standard of PLS3 and PR2, and can be interchangeable with SPM products.
Lake Petro low torque and high pressure plug valve are made of high quality and high strength structural alloy steel. Strict heat treatment ensures even metallographic structure and loading capacity. The materials completely conform to USA ASTM and AISI standards and to be produced according to API Spec 6A. The connection available in LP thread, Tubing thread, butt weld, and non-pressure sealing end.
Specification
Size:
1 Plug Valve Low Torque (1 x 1) Male x Female FIG1502
1 Plug Valve Low Torque (1 x 2) Male x Female FIG1502
2 Plug Valve Low Torque (2 x 2) Male x Female FIG1502
3 Plug Valve Low Torque (3 x 3) Male x Female FIG1502
Cold working pressures: 42Mpa (6000Psi), 70Mpa (10000Psi), 105Mpa (15000Psi).
Connection type: hammer union (Fig.602, Fig.1002, Fig.1502 MXM, MXF, and FXF), LP female thread and LP external thread and the plug valve with bottom base can be designed upon the client's request.
Plug Valve Repair Kit Interchangeability
Plug valve repair kits can be provided for standard service, or low temperature and sour gas condition. These repair kits are replaceable and interchangeable for Weir SPM, FMC and 3 DR plug Valve, which is including plug, seal segment, side segment, elastomer seals, and grease fittings.
8 Types of Drill Pipe Float Valves:
Lake's Drill Pipe Float Valves
Drill pipe float valves, or non-return valves, are downhole safety valves that create barriers to prevent unwanted flow of fluids up the drill string. The valve locks down the flow of fluids while the crew at the rigfloor is making or breaking connections.
Finding the best fit for every individual project is important, and the different types go beyond just the split between the F-type plunger valves and the G-type flapper valves. Hereâ??s a fast primer and reminder on the differences between the types of non-return valves available.
1. Model F Plunger Type Valve:
2. Model FA Ported Plunger Type Valve:
3. Model FC Plunger Type Automatic Fill Valve:
4. Model G Full Flow Flapper Type Valve:
5. Model GA Flapper Type Valve:
6. Model GC Automatic Fill Flapper Type Valve:
7. Model GCA Automatic Fill/Pressure Monitoring Flapper Type Valve:
8. Flapper Valve F/Dual Flapper Check Valve:
BACK PRESSURE VALVE (INSIDE BOP/ GRAY VALVE) is a heavy-duty drop check valve that is positioned in the drill string to control formation pressure during kicks. It controls the backflow through the inside of the drill pipe itself, preventing damage to the swivel, drilling hose, standpipe and circulation equipment. During normal circulation of drilling fluids down the drill pipe, the valve remains open to permit the flow through it. A conical plug, or dart, minimizes the erosive action of the drilling fluid on the valve seat and assures a long lasting seal between the valve dart and valve seat.When any backflow occurs, the valve closes automatically to contain it, protecting the drilling equipment as well as controlling the kick that could otherwise lead to a blowout.
Ball Type Full Opening Safety Valve is designed to be stabbed into the top joint of drill pipe or tubing at the rig floor and closed quickly in case a well kicks. After weight material is added to the mud, the Kelly can be reconnected, the safety valve opened, and circulation initiated.
Like the Kelly valve, the Safety Valve is full opening. The ball-type design permits the valve to be compact, easy to handle, and yet have great strength. Standard test pressure is 10,000 pounds, but higher pressure ratings are available.
Kelly Valve also named Kelly Cock/Drill Pipe Safety Valve allowing free passage of drilling fluid without pressure loss. The valve can be used as a dill pipe safety valve or upper Kelly valve to control blowout pressures, or as a lower Kelly Valve to prevent loss of drilling fluid when the Kelly is disconnected. It has a pressure rating of 5,000psi or 10,000psi or 15,000psi.
Swaco Choke valves are designed to control flow or pressure of fluids by change of choking area, available with various types such as positive choke valve, adjustable choke valve, orifice type choke valve and plunger type choke valve.
We can offer customized choke valve based on customer needs.
Feature:
1. Products design, manufacture and inspection fully comply with API Spec 6A and NACE MR0175.
2. Body is available with a port for monitor and pressure release.
3. The added safety pin is designed to release cavity pressure prior to removing bonnet.
4. Made of hard alloy, valve plug and seat have excellent wear and erosion resistance to ensure normal operation of choke valves.
5. Orifice and seat are installed below the entry pass to extend the service life.
6. Simple configuration and easy to maintain.
Swaco Style drilling choke in China
The LAKE DM Gate Valves are solid gate, rising stem, gate valves with resilient seals. They are purpose made for mud, cement, fracturing and water service and are easy to operate and simple to maintain.
The DM Gate Valves with superior design features precision workmanship and a proven principle are engineered to meet the harsh drilling requirements in todays oilfield.
DM Series Mud Gate Valves are designed and manufactured in accordance with the following specifications:-
API 6A Specification for Wellhead and Christmas Tree Equipment.
ANSI B31.3 Chemical Plant and Petroleum Refinery Piping.
ASME VIII Boiler and Pressure Vessel Code.
MSS-SP-55 Quality Standard for Steel Castings for Valve, Flanges and Fittings and Other Piping Components.
NACE MR-01-75 Sulphide Stress Cracking Resistant Metallic Materials for Oilfield Equipment.
1.Plastic/chevron packing stays clean and free from contaminants to reduce maintenance costs.
2.Tight mechanical seal is assured with parallel expanding gate design.
3.This design provide upstream and downstream sealing simultaneously which is not affected by pressure fluctuation and vibration.
4.A double row roller thrust bearing on the stem makes operation easy,even under full pressure.
Hydraulic actuator installed on the top of the bonnet which controls the open and close of the valve by hydraulic pressure
Metal seal between the body and bonnet
Backseat seal between the stem and the bonnet ,easy for the change of sealing stuff under pressure
Sealing surface is hard-faced or the QBQ with the performance of anti-corrosion,wear-resistance
Low operating torque
End Connection: Flange,Thread,Union,BW
Size:1 13/16- 7 1/16
Temperature:K. L .P. R .S. T. U. V
Material:AA. BB. CC. DD. EE. FF
PSL:PSL1-PSL3G
PR:PR1. PR2
Pressure:2000-20000 PSI
Application:Oil, Chemical industry, etc.
Medium:Oil,Gas,Water,etc.
Butterfly valve is closed a disc, around the axis of rotation to achive a valve open and close, in the tube on the main cuttring and throttling. opening and closing is a disc-shiped buttefly plate, the body is around its own axis rotation turn, so as to achieve the aim of opening and closing or adjust. buttefly valve fully open to the barrier is usually less than 90°C, Butterfly valve and the adjusment rod itself-locking ability, for the sake of the butterfly plate positioning, to add worm gear reducer on the valve stem, the use of worm gear reducer, can not only make the butterfly plate with self-locking ability. make the butterfly plate to stop at any position, can also improve the operating performance of the valve.
Model of products:
D371F-16C
D: Valve code: D butterfly valve.
3: Driver code: handle-drive, two screw-link transmission,3 worm transmission,6 pneumatic,9 electric.
7: Link forn code: 4 flange,7pairs of folders.
1. Structure of the code: 0 the center line, a vertical plate, two pairs of eccentric, 3 triple eccentric.
F:Sealing material: X-NBR, XE-EPDM,,Xsi slicone Rubber,Xt fluorine rubber, Xt special rubber, F PTFE
16: Nominal Pressure: PN0.6-16Mpa.
C: Body Material: Ht200 Cast Iron, C carbon steel, Q-iron.
Product Description
The LAKE DM Gate Valves are solid gate, rising stem, gate valves with resilient seals. They are purpose made for mud, cement, fracturing and water service and are easy to operate and simple to maintain.
The DM Gate Valves with superior design features precision workmanship and a proven principle are engineered to meet the harsh drilling requirements in todayâ??s oilfield.
DM Series Mud Gate Valves are designed and manufactured in accordance with the following specifications:-
API 6A Specification for Wellhead and Christmas Tree Equipment.
ANSI B31.3 Chemical Plant and Petroleum Refinery Piping.
ASME VIII Boiler and Pressure Vessel Code.
MSS-SP-55 Quality Standard for Steel Castings for Valve, Flanges and Fittings and Other Piping Components.
NACE MR-01-75 Sulphide Stress Cracking Resistant Metallic Materials for Oilfield Equipment.
Technical Parameters
1. Designed specifically for Abrasive and Erosive use.
2. All Valves Have Stainless Steel Stems.
3. API 6A PSL 1, 2 and 3 available.
4. Gates can be supplied in Nickel-Plated Carbon Steel, Monel, Aluminum Bronze or Stainless Steel.
5. Stainless or Carbon Steel Inserts with Nitrile or HNBR Elastomer.
6. Factory Pressure Tested in Accordance with API.6A.
7. Can be supplied with Flanged End Connections, Hammer Union Ends, Threaded Connections or Butt Weld Ends.
8. Sour Service Models to NACE MR-01-75.
9. Available with Pressure Ratings: 2000psi, 3000psi, 5000psi, 7500psi. Port Size with: 2", 3", 4", 5" x 4" and 6" x 4"
10. Full Material Traceability Guaranteed.
11. Supplied with Full Certification at no extra charge.
Pff Gear Operated Two Way Gate Valve:
According to the customer's request and the need of oil production,on basic of the PFF slab gate valve,we have a new design in accordance with the API 6A specification strictly and then manufacture PFF gear operated two way gate valve which with a lower indicator.
Size: 2-1/16",3-1/8",3-1/16",4-1/16",5-1/8",7-1/16"
WP:2000-15,000psi
Working Temperature:L U,PU
Material:AA-FF PSL:1-4 PR:1-2
Material Level: DD, EE, FF
Spec: PSL1~PSL3
Customized Orders (eg. 5 way or 6 way blocks)
PFF GEAR OPERATED TWO WAY GATE VALVE:
According to the customer's request and the need of oil production,on basic of the PFF slab gate valve,we have a new design in accordance with the API 6A specification strictly and then manufacture PFF gear operated two way gate valve which with a lower indicator.
Size: 2-1/16",3-1/8",3-1/16",4-1/16",5-1/8",7-1/16"
WP:2000-15,000psi
Working Temperature:L U,PU
Material:AA-FF PSL:1-4 PR:1-2
High pressure plug valve produced by our company is designed for a wide range of standard and sour gas drilling production and well servicing appliancation with maximum pressure up to 15000psi. This kind valve features a compact structure, low torque,quick open/and close an easy operation. They are mostly applied on various oilfield manifold.
-Main parts include body, bonnet,plug,segments and hand wheel.
-Cylinder-shaped metal to metal sealing surface between plug and segments ensure reliable working performance.
-Regular end connection is fig 1502M* F nions which can be customized per request.
-Valve shall succesfully complete hydro test prior to delivery.
features:
1) Plug valves, forged of quality high strength alloy steel, are low torque valves based on the technologies introduced from SPM.
2) 1",2"and 3" plug valves with rated working pressure of 6000,10000,15000 psi(42,70,105MPa) are available.
3) They can work in normal temperature, low temperature or H2S environments.
Design features:
1.End connection of plug valve with sizes in English system maybe union or male/female thread (LP,TBG)and they can be freely connected with products in international market
2.Maintenance and repair of valve body can be done without removal ,and no special tools are needed for removal
3.The plugs have very good sealing performance
Visible :there is a visible positioner where we can see fi valve is open or closed .Brake spring will limit the position of valve
Applications:
Fracking
Cementing
Well Service
Gate Valve is used to open or close the pipeline. According to the structure, the gate valves is distributed into rising or non-rising stem gate valve. According to the mode of operation, it is distributed into manual or hydraulic etc. The gate valve is used for drilling fluid manifold, choke manifold, kill manifold and Christmas tree etc.
FL Gate valve:
(1)Full-bore design, effectively eliminate the pressure drop and eddy current, slow flow of solid particles in the valve.
(2)The unique sealing, make the switch torque greatly reduced.
(3)Between bonnet & body and gate & seat are adopt metal to metal seal.
(4)Between gate and seat are adopt metal to metal seal, surface spraying (heap) welding hard alloy, has good abrasion resistance, corrosion resistance.
(5)Seat ring is fixed with plate, keep well steady.
(6)Stem has back seal structure so as to replace seal ring of stem with pressure.
(7)There is seal grease injection valve on bonnet sided so as to repair seal grease, and provided seal and lubricate performance of gate and seat.
(8)It is match with all kind of pneumatic (hydraulic) actuator as customer requirements.
Lake's Slab Gate Valve is equivalent to CAMARON model F & FC series, whose feature is a non-rising stem with a slab gate, full-bore thru-conduit design, floating slab gate and seats, floating seat ring body bushing design to provide safe dependable service. This series of gate valves are made by integral die forging, the body and flanges are integral (non-welding). Shot Blasting for every parts of valve. Phosphate to improve corrosion resistance.All these valves are manufactured by API 6A approved factories with top quality to ensure wellhead working security.
Specifications:
Manufactured and tested in accordance with API Spec 6A
Forged Steel Body and Bonnet
A True Bi-Directional Valve
Low Operating Torque
API Spec 6A PSL, 1, 2, 3
Material Classes DD, EE, FF, to NACE MR-01-75
Connections: Threaded, Butt-weld, Flanged, Union
Medium available: Oil, Gas, and Water
Specification Level: PSL1 ~ PSL4
Performance Requirement: PR1 ~ PR2
Size from 1 13/16"- 7 1/16"
Working pressures: 5000-20000 PSI
Application:
Well Control System, Drilling Manifolds, X-mas trees
Lake's Slab Gate Valve is equivalent to CAMARON model F & FC series, whose feature is a non-rising stem with a slab gate, full-bore thru-conduit design, floating slab gate and seats, floating seat ring body bushing design to provide safe dependable service. This series of gate valves are made by integral die forging, the body and flanges are integral (non-welding). Shot Blasting for every parts of valve. Phosphate to improve corrosion resistance.All these valves are manufactured by API 6A approved factories with top quality to ensure wellhead working security.
Specifications:
Manufactured and tested in accordance with API Spec 6A
Forged Steel Body and Bonnet
A True Bi-Directional Valve
Low Operating Torque
API Spec 6A PSL, 1, 2, 3
Material Classes DD, EE, FF, to NACE MR-01-75
Connections: Threaded, Butt-weld, Flanged, Union
Medium available: Oil, Gas, and Water
Specification Level: PSL1 ~ PSL4
Performance Requirement: PR1 ~ PR2
Size from 1 13/16"- 7 1/16"
Working pressures: 5000-20000 PSI
Application:
Well Control System, Drilling Manifolds, X-mas trees
The Mud Gate Valve, with superior design, features precision workmanship and a proven principle are engineered to meet the harsh drilling requirements in today's oilfield.
Lake Mud Gate Valve is equivalent to OTECO model 72 series, easy operation, tight shut offs, long service life before overhaul. This assures simple, fast, low cost renewal in the field.
Specifications:
Size: 2", 3", 4", 4 x 5
Working Pressure: 2000psi, 3000psi, 5000psi
Working Temperature: -46°C ~ +240°C
Connections: LP Threaded, Butt-weld, Flanged, Union Available
Working Medium: Sour Gas, Water Flood
Valve body protected by oil and abrasion resistant long life rubber seals
Full rising, one piece forged gate & stem, shows at a glance if valve is open, partly open or closed.
Application:
Mud pump line, standpipe manifolds, oil and gas pipelines, abrasive drilling mud system, corrosive water flood lines, cementing services, wellheads, and well treating chemicals.
The Mud Gate Valve, with superior design features precision workmanship and a proven principle are engineered to meet the harsh drilling requirements in today's oilfield.
Lake Mud Gate Valve is equivalent to OTECO model 72 series, easy operation, tight shut offs, long service life before overhaul. This assures simple, fast, low cost renewal in the field.
Specifications:
Size: 2", 3", 4", 4 x 5
Working Pressure: 2000psi, 3000psi, 5000psi
Working Temperature: -46°C ~ +240°C
Connections: LP Threaded, Butt-weld, Flanged, Union Available
Working Medium: Sour Gas, Water Flood
Valve body protected by oil and abrasion resistant long life rubber seals
Full rising, one piece forged gate & stem, shows at a glance if valve is open, partly open or closed.
Application:
Mud pump line, standpipe manifolds, oil and gas pipelines, abrasive drilling mud system, corrosive water flood lines, cementing services, wellheads, and well treating chemicals.
The Mud Gate Valve, with superior design features precision workmanship and a proven principle are engineered to meet the harsh drilling requirements in today's oilfield.
The LAKE DM Gate Valves are solid gate, rising stem, gate valves with resilient seals. They are purpose made for mud, cement, fracturing and water service and are easy to operate and simple to maintain.
The DM Gate Valves with superior design features precision workmanship and a proven principle are engineered to meet the harsh drilling requirements in todays oilfield.
DM Series Mud Gate Valves are designed and manufactured in accordance with the following specifications:-
API 6A Specification for Wellhead and Christmas Tree Equipment.
ANSI B31.3 Chemical Plant and Petroleum Refinery Piping.
ASME VIII Boiler and Pressure Vessel Code.
MSS-SP-55 Quality Standard for Steel Castings for Valve, Flanges and Fittings and Other Piping Components.
NACE MR-01-75 Sulphide Stress Cracking Resistant Metallic Materials for Oilfield Equipment.
1. Designed specifically for Abrasive and Erosive use.
2. All Valves Have Stainless Steel Stems.
3. API 6A PSL 1, 2 and 3 available.
4. Gates can be supplied in Nickel-Plated Carbon Steel, Monel, Aluminum Bronze or Stainless Steel.
5. Stainless or Carbon Steel Inserts with Nitrile or HNBR Elastomer.
6. Factory Pressure Tested in Accordance with API.6A.
7. Can be supplied with Flanged End Connections, Hammer Union Ends, Threaded Connections or Butt Weld Ends.
8. Sour Service Models to NACE MR-01-75.
9. Available with Pressure Ratings: 2000psi, 3000psi, 5000psi, 7500psi, 10000psi. Port Size with: 2", 3", 4", 5" x 4" and 6" x 4", and temperature service up to 400°F.
10. Full Material Traceability Guaranteed.
11. Supplied with Full Certification at no extra charge.
Product Description:
The Shear Relief Valve consists of stem, body, box, cut pin and shroud. The mud pressure acts on the lower end of the valve body, and the valve body is subjected to an upward thrust, which is cut by the stem to cut the cut. When the thrust is such that the shearing stress received by the shearing pin is greater than the shear strength limit of the shearing material, the shearing pin is cut. When the diameter of the piston is determined, different mud pressures can be controlled by the different diameters of the shearing pins. Therefore, in the construction, as long as the construction technology requirements, to determine the mud pressure, the different diameter of the shear pin can be inserted into the corresponding hole.
Main Parameters:
1. Easy to open and close
2.Piston Presure bearing area is small
3.Simple to adjust
4.Suit for multifold mud pumps
Full Opening Safety Valve is a ball type safety valve used to stop flow through the drill string when the drill string is being withdrawn from the well.
Our Full Opening Safety Valve is dual body full-opening safety valve, so it does not interfere with the running of tools such as core barrels or survey instruments. It is designed to be stabbed into the top joint of drill pipe or tubing string at the rig floor and closed quickly in case a well kicks.
The ball-type design permits the valve to be compact, easy to handle, and yet have great strength. Standard test pressure is 10,000PSI, but higher pressure ratings are available.
Full Opening Safety Valve and operating wrench be should be maintained on the rig floor at all times.
Lake's Drill Pipe Float Valves
Drill pipe float valves, or non-return valves, are downhole safety valves that create barriers to prevent unwanted flow of fluids up the drill string. The valve locks down the flow of fluids while the crew at the rigfloor is making or breaking connections.
Finding the best fit for every individual project is important, and the different types go beyond just the split between the F-type plunger valves and the G-type flapper valves. Hereâ??s a fast primer and reminder on the differences between the types of non-return valves available.
The plug valve is a necessary part that is utilized on the high pressure manifold for the cementing and fracturing operations in oil field and also suitable to control over the similar high pressure fluid.
Featuring the compact structure, easy maintenance, small torque, rapid opening and easy operation, the plug valve is ideal for the cementing and fracturing manifolds.
The plug valve consists of the valve body, plug cap, plug and etc. The plug valve is available with the union 1502 inlet and outlet preparations(also available upon customer request). The cylinder body inner wall and side segments work together with the rubber seal segments to provide sealing.
The metal to metal sealing is available between the side segments and cylinder plug, featuring high precision and reliability.
The valve can be easily opened or closed even under the 10000psi high pressure.
SPECIFICATION:
Manufactured and Tested in Accordance with API Spec 6A
Forged Steel Body and Bonnet
API 6A PSL 1, 2 and 3 available
Valve seat and gate are sealed by Metal to Metal Sealing
Low Operating Torque
Quick Release Hand Wheel
Factory Pressure Tested in Accordance with API.6A
Can be supplied with Flanged End Connections, Hammer Union Ends, Threaded Connections or Butt Weld Ends
Material Classes DD, EE, FF, to NACE MR-01-75
Available with Pressure Ratings 3000psi, 5000psi and 10000psi in 2", 3", 4", 5" Valve Sizes
APPLICATIONS:
Oil and Gas lines/Wellheads/Manifolds and Pipelines/Crude Oil and Sour Gas/Well Treating Chemicals
API thread Gauges usage:
Used for checking API internal & external thread.
Conform to: API 5B and 7.
CSG,LCSG,LP,BCSG,TBG,UPTBG
API Thread Gauges:
Used for checking API internal and external threads.
Spec 5B:
CSG 4-1/2 to 20"
LCSG 4-1/2 to 20"
LP 1/8 to 12"
BCSG 4-1/2 to 6"
TBG1.050 to 4-1/2"
UPTBG 1.050 to 4-1/2"
Standard: API Spec 7-2
NC10 to NC77
REG 2-3/8 to 8-5/8"
FH 3-1/2 to 6-5/8"
IF 2-3/8 to 5-1/2"
The LAKE DM Gate Valves are solid gate, rising stem, gate valves with resilient seals. They are purpose made for mud, cement, fracturing and water service and are easy to operate and simple to maintain.
The DM Gate Valves with superior design features precision workmanship and a proven principle are engineered to meet the harsh drilling requirements in todayâ??s oilfield.
DM Series Mud Gate Valves are designed and manufactured in accordance with the following specifications:-
API 6A Specification for Wellhead and Christmas Tree Equipment.
ANSI B31.3 Chemical Plant and Petroleum Refinery Piping.
ASME VIII Boiler and Pressure Vessel Code.
MSS-SP-55 Quality Standard for Steel Castings for Valve, Flanges and Fittings and Other Piping Components.
NACE MR-01-75 Sulphide Stress Cracking Resistant Metallic Materials for Oilfield Equipment.
1.Plastic/chevron packing stays clean and free from contaminants to reduce maintenance costs.
2.Tight mechanical seal is assured with parallel expanding gate design.
3.This design provide upstream and downstream sealing simultaneously which is not affected by pressure fluctuation and vibration.
4.A double row roller thrust bearing on the stem makes operation easy,even under full pressure.
High pressure plug valve produced by our company is designed for a wide range of standard and sour gas drilling production and well servicing appliancation with maximum pressure up to 15000psi. This kind valve features a compact structure, low torque,quick open/and close an easy operation. They are mostly applied on various oilfield manifold.
-Main parts include body, bonnet,plug,segments and hand wheel.
-Cylinder-shaped metal to metal sealing surface between plug and segments ensure reliable working performance.
-Regular end connection is fig 1502M* F nions which can be customized per request.
-Valve shall succesfully complete hydro test prior to delivery.
features:
1) Plug valves, forged of quality high strength alloy steel, are low torque valves based on the technologies introduced from SPM.
2) 1",2"and 3" plug valves with rated working pressure of 6000,10000,15000 psi(42,70,105MPa) are available.
3) They can work in normal temperature, low temperature or H2S environments.
Design features:
1.End connection of plug valve with sizes in English system maybe union or male/female thread (LP,TBG)and they can be freely connected with products in international market
2.Maintenance and repair of valve body can be done without removal ,and no special tools are needed for removal
3.The plugs have very good sealing performance
Visible :there is a visible positioner where we can see fi valve is open or closed .Brake spring will limit the position of valve
Applications:
Fracking
Cementing
Well Service
Processes:
Well completion
Each tong torque system consists of a tension load cell that converts line pull into a hydraulic pressure signal, which it sends to a pressure-sensing gauge through an interconnecting Hydraulic Hose. Each system also includes mounting hardware.
Features:
1) Systems designed and build for the rugged requirements of the oil filled
2) Load Cell's are designed to ensure a long service life with minimum maintenance
3) 6"Fluid filled gauge has years of proven reliability and ease of maintenance
4) Target pointer on gauge helps operator maintain accurate torque
We are also a proud member of the China Pressure Gauge Association.With many years experience,our company specialized in the YK series of Mud Pump Pressure gauges and other oilfield related instruments. we have a strong network that allows us the ability to design and customize. We currently produce over 30 different styles of instruments for various industries that include the oil exploration, chemical industry, chemical fiber industry, iron and steel industry, metallurgical industry, power generation plants, scientific research and so on.we never stop upgrading our technology. We are continually developing new products to meet the more customers'need.
Each tong torque system consists of a tension load cell that converts line pull into a hydraulic pressure signal, which it sends to a pressure-sensing gauge through an interconnecting Hydraulic Hose. Each system also includes mounting hardware.
Features:
1) Systems designed and build for the rugged requirements of the oil filled
2) Load Cell's are designed to ensure a long service life with minimum maintenance
3) 6"Fluid filled gauge has years of proven reliability and ease of maintenance
4) Target pointer on gauge helps operator maintain accurate torque
We are also a proud member of the China Pressure Gauge Association.With many years experience,our company specialized in the YK series of Mud Pump Pressure gauges and other oilfield related instruments. we have a strong network that allows us the ability to design and customize. We currently produce over 30 different styles of instruments for various industries that include the oil exploration, chemical industry, chemical fiber industry, iron and steel industry, metallurgical industry, power generation plants, scientific research and so on.we never stop upgrading our technology. We are continually developing new products to meet the more customers'need.
Specification
Size:
1â?? Plug Valve Low Torque (1 x 1) Male x Female FIG1502
1â?? Plug Valve Low Torque (1 x 2) Male x Female FIG1502
2â?? Plug Valve Low Torque (2 x 2) Male x Female FIG1502
3â?? Plug Valve Low Torque (3 x 3) Male x Female FIG1502
Cold working pressures: 42Mpa (6000Psi), 70Mpa (10000Psi), 105Mpa (15000Psi).
Connection type: hammer union (Fig.602, Fig.1002, Fig.1502 MXM, MXF, and FXF), LP female thread and LP external thread and the plug valve with bottom base can be designed upon the clientâ??s request.
Plug Valve Repair Kit Interchangeability
Plug valve repair kits can be provided for standard service, or low temperature and sour gas condition. These repair kits are replaceable and interchangeable for Weir SPMâ?¢, FMCâ?¢ 2â?? and 3â?? DR plug Valve, which is including plug, seal segment, side segment, elastomer seals, and grease fittings
How to contact us?
Valve Seat Puller & Claw, which is a hydraulic device. The connecting screw thread between leading screw and claw is API Standard and it can be exchangeable. Claw is manufactured by ASTM1066 and has 3 armed, 4 armed and full open type, which is suitable for the size of API-5#,API-6#,API-7#,API-8# valve seat.
Hydraulic valve seat puller is a removal service tool in a mud pump.
The hydraulic valve seat puller is used to take installed mud pump valve seat out of mud pump fluid end module, during the process of replacing the valves seat or mud pump maintenance. At the same time, eliminate damage to fluid end
expendables caused by removing valve seat with a cutting torch.
Material:
Full-threaded rod, claw head is 35CrMo forged.
Hydraulic Valve Seat Puller
Mud pump valve seat puller consists of oil cylinder, hydraulic hand pump with pressure gauge, all thread rod, puller claw etc.
This tool is more effective to finish the maintenance and mud pump repair work with fewer manpower and shorter time.
Advantage:
simple structure, easy to use, can save a lot of manpower and time, and cost-effective.
Valve Seat Puller & Claw, which is a hydraulic device. The connecting screw thread between leading screw and claw is API Standard and it can be exchangeable. Claw is manufactured by ASTM1066 and has 3 armed, 4 armed and full open type, which is suitable for the size of API-5#,API-6#,API-7#,API-8# valve seat.
Hydraulic valve seat puller is a removal service tool in a mud pump.
The hydraulic valve seat puller is used to take installed mud pump valve seat out of mud pump fluid end module, during the process of replacing the valves seat or mud pump maintenance. At the same time, eliminate damage to fluid end
expendables caused by removing valve seat with a cutting torch.
Material:
Full-threaded rod, claw head is 35CrMo forged.
Hydraulic Valve Seat Puller
Mud pump valve seat puller consists of oil cylinder, hydraulic hand pump with pressure gauge, all thread rod, puller claw etc.
This tool is more effective to finish the maintenance and mud pump repair work with fewer manpower and shorter time.
Advantage:
simple structure, easy to use, can save a lot of manpower and time, and cost-effective.
Lake Petro provides API 6A standard Plug Valve with standard Male and Female end connections, and a standard service rating up to 15000psi NSCWP. Plug valve provides flow control for oilfield applications such as cementing, fracturing, aciding, coiled tubing, sand control, and manifold trailers. Manual and Hydraulic operation available for standard and sour gas application. To meet the level standard of PLS3 and PR2, and can be interchangeable with SPMâ??s products.
Lake Petro low torque and high pressure plug valve are made of high quality and high strength structural alloy steel. Strict heat treatment ensures even metallographic structure and loading capacity. The materials completely conform to USA ASTM and AISI standards and to be produced according to API Spec 6A. The connection available in LP thread, Tubing thread, butt weld, and non-pressure sealing end.
Specification
Size:
1â?? Plug Valve Low Torque (1 x 1) Male x Female FIG1502
1â?? Plug Valve Low Torque (1 x 2) Male x Female FIG1502
2â?? Plug Valve Low Torque (2 x 2) Male x Female FIG1502
3â?? Plug Valve Low Torque (3 x 3) Male x Female FIG1502
Cold working pressures: 42Mpa (6000Psi), 70Mpa (10000Psi), 105Mpa (15000Psi).
Connection type: hammer union (Fig.602, Fig.1002, Fig.1502 MXM, MXF, and FXF), LP female thread and LP external thread and the plug valve with bottom base can be designed upon the clientâ??s request.
Plug Valve Repair Kit Interchangeability
Plug valve repair kits can be provided for standard service, or low temperature and sour gas condition. These repair kits are replaceable and interchangeable for Weir SPMâ?¢, FMCâ?¢ 2â?? and 3â?? DR plug Valve, which is including plug, seal segment, side segment, elastomer seals, and grease fittings
High pressure plug valve produced by our company is designed for a wide range of standard and sour gas drilling production and well servicing appliancation with maximum pressure up to 15000psi. This kind valve features a compact structure, low torque,quick open/and close an easy operation. They are mostly applied on various oilfield manifold.
-Main parts include body, bonnet,plug,segments and hand wheel.
-Cylinder-shaped metal to metal sealing surface between plug and segments ensure reliable working performance.
-Regular end connection is fig 1502M* F nions which can be customized per request.
-Valve shall succesfully complete hydro test prior to delivery.
features:
1) Plug valves, forged of quality high strength alloy steel, are low torque valves based on the technologies introduced from SPM.
2) 1",2"and 3" plug valves with rated working pressure of 6000,10000,15000 psi(42,70,105MPa) are available.
3) They can work in normal temperature, low temperature or H2S environments.
Design features:
1.End connection of plug valve with sizes in English system maybe union or male/female thread (LP,TBG)and they can be freely connected with products in international market
2.Maintenance and repair of valve body can be done without removal ,and no special tools are needed for removal
3.The plugs have very good sealing performance
Visible :there is a visible positioner where we can see fi valve is open or closed .Brake spring will limit the position of valve
Applications:
Fracking
Cementing
Well Service
Processes:
Well completion
Rotary table Master bushings and insert bowls Specifications:
We can supply rotary table master bushing and insert bowls sizing from 17 1/2 " to 49 1/2".They are casted with high-quality alloy steel and the sizes conform to API 7K Specification for drilling and well servicing equipment.There are two types,pin drive and square drive.API standard rotary slips,drill collar slips,casing slips and roller kelly bushings can be contained in them.
The basic principle of the hydro cyclone is to separate the two-phase or multi-phase mixture of liquid-liquid, liquid-solid, liquid-gas and so on with a certain density under the action of centrifugal force. The mixed liquid is tangentially flowed into the cyclone with a certain pressure, and a high-speed rotating flow field is generated in the cylindrical cavity. The high density components in the mixture under the action of the swirling flow at the same time along the axial downward movement along the radial outward movement in the reach of the force down along the wall along the wall, and from the bottom outlet, thus forming. The small vortex component moves toward the central axis and forms an upwardly moving internal vortex in the central of the axis, and then is discharged from the overflow port, thus achieving the purpose of two-phase separation.
Product Description:
Drilling mud shale shaker solids control manufacture
First API certified solids control equipments manufacturer in China
Own worldâ??s most advanced patent 4th generation BEM shaker
Drilling fluids shale shaker have been exported to over 50 countries and regions
All Facilities total area are over 70,000sqaure meters
Very few China companies who provide Vertical Cutting Dyer & Hi G Dryer.
Drilling mud solids control shale shaker Recent Applications
(1) OIL&GAS DRILLING----Solids Control System
(2) HDD & CBM Drilling ----Mud Recycling System
(3) Mining & Industrial----Slurry Separation Plan
Complete Line Products
Main Equipment: Shale Shaker, Mud Cleaner ,Desander ,Desilter, Centrifuge, Cutting Dryer ,Agitator, Mixing Hopper, Flare Igniter, Various Tanks, Pumps, Degassers etc.
Manufacture all types of shale shaker screens in Asia largest wiremesh center city.
Company Information:
Solid Control Linear Type Shale ShakerLake Petro has been focusing on the oil and gas equipment supply more than 9 years. We always consider to support the customer economic cost, stable quality and comforable service.
FAQ:
How can I place order?
A: You can contact us by email about your order details, or place order on line.
How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (HSBC bank), Western Union are the most usual ways we are using.
What is the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15days if we donot have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
Milling shoe can be divided into three kind: flat-bottom(or concave-bottom) milling shoe, guide mill shoe and come mill shoe according to its structure and shape At the milling surface, the carbide particles are built up by welding, which plays a part of self-milling. It is used to mill the fallen substances, such as bolt, nut, tooth wheel, slip dog, fittings for deep-well pump, etc.
The junk mill are designed to mill away metal objects, such as alloy-steel packers, squeeze tool, perforating guns, drill pipe, tool joints, reamers, reamer blades, and rock bits. The junk mills consists fo the body made from high-strength alloy steel and dressed with super tough sintered tungsten carbide.available in OD s from 3 3/4 to 18 1/2 with no blades or 3 to 6 blades in 10 to 36 lengths with convex, concave, flat bottom, or offset design.
SJ series auxiliary elevators are mainly used in handling single casings or tubings in oil drilling natural gas drilling and cementing operation. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.
SP series auxiliary elevators are mainly used in handling single tubings, casings and drill pipes with taper shoulder. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.
Product Description
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable.
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
APPLY TO BELOW BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Technical parameter
Specification:
1. Standad: API 16 A and ISO 9001
2. Rated Pressure: 2000Psi to 15000Psi(14-17 Mpa)
3. Size: Nominal Bore: 7-1/16" to 21-1/4" (179.4mm to 539.75mm)
4. Type: Shear Ram/ Pipe Ram/ Variable Bore Ram
5. Usage : Single Ram BOP/ Double Ram BOP/ Three Ram BOP
6.Brand:Shenkai and Rongsheng.
7.Imitate: Camaron and Shaffer
8.U type and SH type
Characters of BOP pare parts:
In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks.
Blowout preventer with spherical plastic core and dust-proof ring.
Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use.
Working of BOP pare parts:
When wells must be sealed in case of kicks high pressure (10.5Mpa) oil from control systems enters into close-cavity under piston from housing oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer to each other to moce the rubber between them to the center of wellhead so as to seal drilling tools or fully seal wellhead. In opening , hydraulic pressure oul enters into open-cavity above piston from housing oul inlet, to push piston moving downwards , so that plastic will reset with its own elasticity, wellhead will be open.
Description:
Shear pin safety valve is used at the discharge part of the mud pump.JA-3 shear pin safety valve changes the discharging pressure by changing the position of the shear pin ,which is operation easy and work reliable.
Features:
1. Opening and shutting neatly.
2. Piston's bearing pressure area is small.
3. To reposition simply.
4. Safety Valve may use for multifold mud pumps.
5. flange / screw thread connection
6. Max pressure:35Mpa
We can supply many spare parts of slurry pump. OEM pump part is welcome.
Material options:
-High Chrome alloy
-Grey Iron
-Cast Iron
-Rubber
-Polyurethane
-OEM Pump Parts:
Metal impeller is made of high chrome alloy, SA05,SA49, anti-abrasive, SA33 anti-corrosive
Rubber impeller is made of SR26,SR55, SR33
Polyurethane material is available.
Brief introduction:
-Spare parts in anti-abrasion high chrome cast iron alloy.
-Largest weight of single workpiece can be 13t.
-Largest outside diameter of workpiece can be 5m
-Manufacture other mechanical parts according to your drawing.
Product Description
BOP parts: interchangeable 100% with original.
BOP PART NAME: packing element, top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
SUITABLE FOR BELOW BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Technical parameter
Specification:
1. Standad: API 16 A and ISO 9001
2. Rated Pressure: 2000Psi to 15000Psi(14-17 Mpa)
3. Size: Nominal Bore: 7-1/16" to 21-1/4" (179.4mm to 539.75mm)
4. Type: Shear Ram/ Pipe Ram/ Variable Bore Ram
5. Usage : Single Ram BOP/ Double Ram BOP/ Three Ram BOP
6.Brand:Shenkai and Rongsheng.
7.Imitate: Camaron and Shaffer
8.U type and SH type
Characters of BOP pare parts:
In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks.
Blowout preventer with spherical plastic core and dust-proof ring.
Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use.
Working of BOP pare parts:
When wells must be sealed in case of kicks high pressure (10.5Mpa) oil from control systems enters into close-cavity under piston from housing oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer to each other to moce the rubber between them to the center of wellhead so as to seal drilling tools or fully seal wellhead. In opening , hydraulic pressure oul enters into open-cavity above piston from housing oul inlet, to push piston moving downwards , so that plastic will reset with its own elasticity, wellhead will be open.
Blowout Preventers are designed to give positive protection against blowouts when operating with wire line in well services work, by providing a positive seal around wire line.
This BOP's are available basically in two types: Hydraulically Operated and Manually Operated, with configurations as desired. An equalizer valve allows the operator to equalize the pressure with lubricator pressure.
Blowout Preventers are available in sizes ranging from 2-1/2" ID through 6-3/8" ID and 3000 PSI through 15,000 PSI working pressure. Contact factory for details on pump, fittings, hoses and other accessories.
1. Module is made from 4135 alloy steel with strict forging and heat treatment process. 2. Mud pump fluid end parts offer full lines of Cylinder Head, Valve Lock Cover, Cylinder Head Threaded Ring, Cylinder head Plug, Valve Cover Plug, Upper Valve Guide, Lower Valve Guide, Liner Threaded Ring, Liner Lock, Wear Plate and much more.
3. Three types of Liner:High chrome sleeve/single shell/zirconia ceremic liner.
4.Pony rod and piston rod is made of premium quality,heat treated alloy steel.
5.Valve and seat assembly are made of forged alloy steel with deep carburized wear surface. We offer a full range of valves and seats which include full open valve and seat, 3 web / 4 web design valve and seat .
Our main products :
1.Fluid End Pump Parts:Liners,Piston Rod and Pony Rod,Piston and Hubs,Fluid End Modules
and Accessories, Valve and Seat for all major brand mud pumps.
2.Mud Pump: EMSCO,3NB
3.OCTG Production Equipment: Hydro-Tester, Lengthening Weighing & Marking Equipments
Coupling Application Machine etc.
4.We also offer custom design-built service per our clientâ??s drawings and specifications.
The 2S gear oil pump produced by MT is a spare part of the mud pump for the oilfield drilling equipment.The productive process of it employs premium material,advanced manufacturing process and its quality is reliable.
We have specialized in manufacturing spare parts of mud pump for over 10 years to the worldwide Oil Drilling industry.
We stock and sell a wide selection of mud pump fluid end expendables and spares parts.
Mud pump parts for F series mud pump, For P series mud pump, For PZ series mud pump, For 3NB series mud pump.
These parts include liners, pistons, valves & seats,piston rods, rod clamps, extension rods, all
fluid end seals and gaskets, fluid cylinder modules and accessories, as well as power end
components, such as crankshaft assemblies, gear sets, connecting rods, crosshead, and bearings.
The fracturing pump fluid end blocks and spares are 100% interchangeable to BJ, Gardner Denver, Halliburton, Serva, FMC.
We can supply the Spare Parts for the Pump Models as follow:
HQ 1400 4 fracturing pump SPM2000-5" fluid end
HQ-1400/2000 Frac Pump Fluid End Asembly
SPM-TWS 600 Triplex Plunger Pump
SPM QWS2500 Quintuplex Plunger Pump Compatible
TWS-2000/2250 Frac Pump Fluid End Assembly
Halliburton HT400 plunger pump
Serva TPA600 pump SERVA pump: TPA-400 plunger pump . TPA-600 plunger pump. TPB-600 plunger pump. TPA-400 plunger pump
GD-2500 Quintuplex Plunger Pump Compatible
OPI 1800AWS Frac Pump Compatible
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable.
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
SIUTABLE FOR BELOW BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
How to contact with us:
1. Reverse Circulation Fishing Magnet:
Reverse Circulation Fishing Magnet is a new fishing tool based on TOPMAG Standard Fishing Magnet. It combines advantages of Reverse Circulation Fishing Basket and Fishing Magnet. Its unique reverse-circulation design brings better performance on cleaning bottom hole.
Construction:
Reverse Circulation Fishing Magnet Assembly consists of lifting bail, top sub, housing, magnet element, pole plate, standard flush guide, and steel ball. When using we can select appropriate guide.
Operation:
Run the fishing magnet in a place which approximate 40 inches from the bottom of hole. Circulate to wash the fish,reduce circulation and lower the fishing magnet to the bottom of hole to attach the fish. Slowly rotate to ensure positive contact. Lift up 10 to 20 inches, drop the steel ball into the fishing string, and pump the steel ball into ball seat. Rotate and circulate for a moment, discontinue circulation and lift the fishing magnet from the hole.
Optional Accessories:
A flush guide is standard. Lipped guides and mill guides are also available.
2.Standard Fishing Magnet:
Fishing Magnet is a junk retrieval tool designed to retrieve small metal, oddly-shaped objects such as milling shavings, bit cones, cutters, bearings, slips, tong pins, and hand tools from the bottom of the hole. Typically,these objects are the result of bit failures, an accumulation of mill cuttings, or simply accidental droppings of unmillable objects. In almost all of these cases, the fish cannot be engaged in the normal manner. Fishing magnets can successfully remove these objects from the hole. The tools design features generous circulation ports that wash away cuttings and other debris that might interfere with or prevent contact with the magnet. A variety of guides are available to accommodate any retrieval situation.
Construction:
The Fishing Magnet Assembly consists of top sub, housing, magnet element, pole plate, and standard flush guide. The body is manufactured from high strength alloy steel. The magnet element is a powerful permanent magnet. Used properly, it will never lose its charge. The magnet body, housing, and pole plate are threaded and welded together during assembly with the magnet element in place.The standard flush bottom guide is threaded and easily removed.
1. Reverse Circulation Fishing Magnet:
Reverse Circulation Fishing Magnet is a new fishing tool based on TOPMAG Standard Fishing Magnet. It combines advantages of Reverse Circulation Fishing Basket and Fishing Magnet. Its unique reverse-circulation design brings better performance on cleaning bottom hole.
2.Standard Fishing Magnet:
Fishing Magnet is a junk retrieval tool designed to retrieve small metal, oddly-shaped objects such as milling shavings, bit cones, cutters, bearings, slips, tong pins, and hand tools from the bottom of the hole. Typically,these objects are the result of bit failures, an accumulation of mill cuttings, or simply accidental droppings of unmillable objects. In almost all of these cases, the fish cannot be engaged in the normal manner. Fishing magnets can successfully remove these objects from the hole. The toolâ??s design features generous circulation ports that wash away cuttings and other debris that might interfere with or prevent contact with the magnet. A variety of guides are available to accommodate any retrieval situation.
1. Reverse Circulation Fishing Magnet:
Reverse Circulation Fishing Magnet is a new fishing tool based on TOPMAG Standard Fishing Magnet. It combines advantages of Reverse Circulation Fishing Basket and Fishing Magnet. Its unique reverse-circulation design brings better performance on cleaning bottom hole.
Construction:
Reverse Circulation Fishing Magnet Assembly consists of lifting bail, top sub, housing, magnet element, pole plate, standard flush guide, and steel ball. When using we can select appropriate guide.
Operation:
Run the fishing magnet in a place which approximate 40 inches from the bottom of hole. Circulate to wash the fish,reduce circulation and lower the fishing magnet to the bottom of hole to attach the fish. Slowly rotate to ensure positive contact. Lift up 10 to 20 inches, drop the steel ball into the fishing string, and pump the steel ball into ball seat. Rotate and circulate for a moment, discontinue circulation and lift the fishing magnet from the hole.
Optional Accessories:
A flush guide is standard. Lipped guides and mill guides are also available.
General instruction:
We offer a complete line of single & double and triple tube core barrels, which willl provide superior performance and obtain the full recovery of the sample in any application of diamond core drilling.
Using a wireline system, core is recovered quickly by retrieving the inner tube directly through the drill string. The rods remin in the hole until the bit needs to be replaced. This has big cost advantages when drilling deep holes for mineral exploration.
The core barrel assembly is composed of the inner-tube group and outer-tube group.
Advantages:
1.Faster coring at greater depths
2.Good stability due to constant diameter of the drill string
3.Excellent hydraulics
4.Good core recovery
1. Product performance standards: api 8a and sy / t5235.
2. Environmental conditions used sucker rod elevator
A) allows the use at a temperature of -18, ~ 70, .
B) meet the harsh conditions of oil field operations.
3. Sucker rod elevator's types: reed.
4. Material requirements: kava body is made of high-quality high-strength steel, handles made of high quality alloy forged steel.
5. Sucker rod elevator main technical parameters:
A) applicable rod outer diameter: 5 / 8in ~ 1 1 / 8in.
B) maximum load: 15t (135kn), 25t (225kn).
6. Sucker rod elevator major quality control requirements:
1) the chemical composition of each batch of material compliance with the relevant standards.
2) body 10% radiographic flaw detection, high stress area to meet the requirements of grade â?¡ gb / t5677, the remaining parts of the meet gb , level requirements / t5677's.
3) mechanical properties body of not less than: rm, 640 pma, rp0.2, 540 pma, z, 15%, a, 25%, akv, 42j (-20, ).
4) product 10% for 1.5 times the testimony load test.
5) all parts for magnetic particle testing, high stress area to meet the requirements of grade â?¡ gb / t9444, the remaining parts of the meet gb , level requirements / t9444's.
6) the main products from raw materials to the carrier using the site dating back the whole process.
7. Sucker rod elevator structure diagram and parts list below:
Cdq (s) sucker rod elevator structure diagram.
Api 9a drilling wire line rope
Construction:
1x3;1x7;1x12;1x19;6x7+fc/iwrc ;6x12+7fc;6x19+fc/iwrc;6x24+7fc;6x37 6x25fi+fc/iwrc;6x26ws;6x36+fc/iwrc, ws;8x19s+fc/iwrc;19x7
Quality assurance system:
A. Strict selection of domestic high-quality hard-line to control theh product quality : using domestic the best materials, such as bomco wire rope company and shagang group.
B. Perfect rod testing equipment: spectrometer, tensile testing machine, metallographic analyzer, high and low times metallographic analyzer.Testing for detection rod into the plant chemical costs, tissue properties and mechanical properties.
C. With perfect wire rope and wire rope testing equipment: medium and small tensile testing machine, torsion testing machine, bending test machine, steel strands-tension fatigue testing machine, wire bending fatigue testing machine, fatigue testing
Machine wire rope, wire rope pre-tensioning equipment, etc, we can test the the performance of wire rope.
D. Wire rope production process using the advanced north america, germany management models. Meanwhile, the introduction of technology also brings the foreign advanced production organization and management mode such as quality track record, pre-production equipment, tooling, mold and other inspection records, processing management.
E. Product organizational processes in according to gb/t19001 and apispecq1 for quality control.
F. Corresponding to each batch of steel wire rope in accordance with rigorous testing standards, including process and final inspection.
G. Approved by the american petroleum institute api monogram. And had passed the iso9000 certification.
Product Description
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable.
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
APPLY TO BELOW BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Technical parameter
Specification:
1. Standad: API 16 A and ISO 9001
2. Rated Pressure: 2000Psi to 15000Psi(14-17 Mpa)
3. Size: Nominal Bore: 7-1/16" to 21-1/4" (179.4mm to 539.75mm)
4. Type: Shear Ram/ Pipe Ram/ Variable Bore Ram
5. Usage : Single Ram BOP/ Double Ram BOP/ Three Ram BOP
6.Brand:Shenkai and Rongsheng.
7.Imitate: Camaron and Shaffer
8.U type and SH type
Characters of BOP pare parts:
In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks.
Blowout preventer with spherical plastic core and dust-proof ring.
Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use.
Working of BOP pare parts:
When wells must be sealed in case of kicks high pressure (10.5Mpa) oil from control systems enters into close-cavity under piston from housing oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer to each other to moce the rubber between them to the center of wellhead so as to seal drilling tools or fully seal wellhead. In opening , hydraulic pressure oul enters into open-cavity above piston from housing oul inlet, to push piston moving downwards , so that plastic will reset with its own elasticity, wellhead will be open.
Specification:
1).Size: 2'', 3'', 4''
2).Working pressure:6000-20000psi(42mpa-140mpa)
3).Working temperature: -29â°c~121â°c.
4).Application enrvironment: standard or h2s
5).Standard: api standard
Introduction:
1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from fmc, usa.
2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or h2s environments, with sizes ranging from 2" to 4" and rated wp ranging from 6000-20000psi(42mpa-140mpa).
3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space.
4. Patterns of swivel joint are made in nc machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet fmc standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load.
5. All sizes of swivel joints can be interchanged with fmc equivalent products used in cementing and fracturing equipment.
6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced.
7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.
1. Material : alloy steel
2. Grade: ASTM A194 2H , ASTM A193 B7
3. Size: M3 - M48
4. Standard: A194 ,A193
5. Certification: ISO9001, SGS, CTI .
How to contact with us:
The Lake Fishing Magnet is a junk retrieval tool designed to effectively remove metal particles, shavings, and debris from the bottom of the well bore.
The process of retrieving small, oddly shaped objects is one of the most frequent and most difficult fishing jobs.
Typically, these objects are the result of bit failures that leave cones and cutters in the hole, or are an accumulation of mill cuttings, or are simply accidental droppings of unmillable objects into the hole.
In these cases, the fish is nearly always an odd-shaped object that cannot be engaged in the normal manner.
Fishing magnets successfully remove these small objects from the hole bottom. The tool's design incorporates generous circulation holes that wash away the cuttings and other debris that other wise would prevent contact with the magnet.
Fishing magnets can be run on either wire line or pipe.
Annular Blowout Preventer(Annular BOP) is important equipment for drilling well. It widly used in onshore and offshore drilling, Geothemal driling. We supply three type of annular BOP: Bloted-cover, Wedged-Cover and Latched-cover. All type of annular BOP are strictly manucatured as per API spec 16A, have same reliable quality as other US products.
There type are Camaron, shaffer and Hydril in the the word.
Material level: dd, ee, ff
Spec: psl1~psl3
Customized orders (eg. 5 way or 6 way blocks)
Vacuum Degasser are used to remove the small entrained gas bubbles left in the mud by the mud/gas separator. These units are positioned downstream from mud/gas separators, shale shakers and mud cleaners, while hydrocyclones and centrifuges follow in the arrangement.
Operational Theory:
Vacuum degasser utilize negative pressure by vacuum pump to withdraw entrained gases from the mud. In order for this to work, mud is pumped through a venturi, which develops a negative pressure in the vessel by vacuum pump, thus sucking mud into the unit. The choice between horizontally- or vertically-mounted units is typically based on the footprint requirements of the specific rig.
Features and Advantages:
1.Scientific reasonable design for structure,it can get effective gas fluids separation,filter out impurities to guarantee vent pipe always clear.
2.Adopt belt drive,avoid the complication of the reducing gear,ensure the long working time without trouble.
3.Water circle type of vacuum pump is always at a constant temperature,apply to pump the flammable and explosive.
4.High degassing efficiency,up to 95%.
5.There is gas-water separator in vacuum degasser,which can avoid the gas and fluids are all removed together,and also can supply water for vacuum pump,saving water and environment-friendly
Vacuum Degasser are used to remove the small entrained gas bubbles left in the mud by the mud/gas separator. These units are positioned downstream from mud/gas separators, shale shakers and mud cleaners, while hydrocyclones and centrifuges follow in the arrangement.
Operational Theory:
Vacuum degasser utilize negative pressure by vacuum pump to withdraw entrained gases from the mud. In order for this to work, mud is pumped through a venturi, which develops a negative pressure in the vessel by vacuum pump, thus sucking mud into the unit. The choice between horizontally- or vertically-mounted units is typically based on the footprint requirements of the specific rig.
Features and Advantages:
1.Scientific reasonable design for structure,it can get effective gas fluids separation,filter out impurities to guarantee vent pipe always clear.
2.Adopt belt drive,avoid the complication of the reducing gear,ensure the long working time without trouble.
3.Water circle type of vacuum pump is always at a constant temperature,apply to pump the flammable and explosive.
4.High degassing efficiency,up to 95%.
5.There is gas-water separator in vacuum degasser,which can avoid the gas and fluids are all removed together,and also can supply water for vacuum pump,saving water and environment-friendly
How to contact us?
Specification:
We are producing vavious custom Zirconia Ceramic Liner ceramic sleeve for pump which is high temperature resistant tubes .
Zirconia Ceramic liner Ceramic Sleeve for pump have exceptional hardness and strength, resistance to chemical attack and wear, low dielectric loss and excellent electrical insulation properties. Additionally, Alumina can be metallized for brazing to other metals, highly polished, and comes in a variety of purities depending on it use. Due to these outstanding properties ceramic Alumina tubes are used in a wide range of industrial and advanced applications.
Zirconia Ceramic Liner Ceramic Sleeve for pump exhibits high hardness, good abrasion resistance, high strength, and stability. These products are developed incorporating sophisticated technology and are made available to patrons at market leading prices.
Zirconia Ceramic Liner ceramic sleeve for pump is a unique advanced ceramic. Products manufactured from alumina ceramic exhibit superior mechanical properties such as high strength and flexibility. Heat insulating properties and oxygen-ion conductivity indicate zirconia has potential for use in a wide variety of applications - everything from telecommunications to the new energy of the future and environmentally beneficial products.
Depending on doping material different material properties could be achieved because of influencing the Yttria's microstructure. The "Ceramic Steel" titled Zirconia is doped with Yttria forming an ultra-fine ductile structure with sub-micron grain formation leading to enormous bending strengths. Magnesia doped qualities are less strong also showing a coarser microstructure.
Advantages:
1. Excellent insulation, security, long working life.
2. High temperature resistance.
3. Resistance to electric breakdown.
4. Stand wear and tear.
5. High strength.
6. Corrosion resistance.
7. Good compactness.
8. HIgh hardness.
Wellhead and Christmas tree is used for well drilling and oil or gas production, water injection and downhole operation. wellhead and christmas tree is installed on the top of a well to seal the annular space between casing and tubing, can control wellhead pressure and adjust well flow rate and transport oil from well to pipe line.
We design and manufacture the wellhead and christmas tree in according with API 6A standards totally, also can be supplied to meet the complete material class, temperature range and PSL & PR level requirements. We have lots of type of wellhead for choice,such as conventional spool wellhead, ESP wellhead system, thermal wellhead ,water injection wellhead, time saving wellhead, dual tubing wellhead, integral wellhead, etc.
We can supply Christmas Tree for ESP USE as well. And our X-MASS TREE have been widely used for oil and gas production and geothermal well.
Product Application:
Core Trays are designed for the mining and exploration industry to store and transport core samples.
Lake series core tray is designed according to standard wire-line rock core, its model include BQ.NQ.HQ.PQ,and we also have lid, block and tag as accessories to perfect drilling work. All our goods are produced by large injection machine, and A.B.C grade are separated according to different raw material, so client can choose the suitable core tray. Compare to ordinary type, Q core tray performs excellent under quite high/low temperature, and its age is much longer.
Feature:
1. Triangle support on the bottom to Strengthen boxâ??s load capacity.
2. Two lines of 7mm width drainage hole on the end to make sure mud flows smoothly.
3. Block is inserted inside core tray to tell different rock core apart.
4. Paper tag on the top end to remark core information.
5. 30 pieces of core trays can be stacked tightly without falling down.
Product Application:
Core Trays are designed for the mining and exploration industry to store and transport core samples.
Lake series core tray is designed according to standard wire-line rock core, its model include BQ.NQ.HQ.PQ,and we also have lid, block and tag as accessories to perfect drilling work. All our goods are produced by large injection machine, and A.B.C grade are separated according to different raw material, so client can choose the suitable core tray. Compare to ordinary type, Q core tray performs excellent under quite high/low temperature, and its age is much longer.
Feature:
1. Triangle support on the bottom to Strengthen boxâ??s load capacity.
2. Two lines of 7mm width drainage hole on the end to make sure mud flows smoothly.
3. Block is inserted inside core tray to tell different rock core apart.
4. Paper tag on the top end to remark core information.
5. 30 pieces of core trays can be stacked tightly without falling down.
Product Application:
Core Trays are designed for the mining and exploration industry to store and transport core samples.
Lake series core tray is designed according to standard wire-line rock core, its model include BQ.NQ.HQ.PQ,and we also have lid, block and tag as accessories to perfect drilling work. All our goods are produced by large injection machine, and A.B.C grade are separated according to different raw material, so client can choose the suitable core tray. Compare to ordinary type, Q core tray performs excellent under quite high/low temperature, and its age is much longer.
Feature:
1. Triangle support on the bottom to Strengthen boxâ??s load capacity.
2. Two lines of 7mm width drainage hole on the end to make sure mud flows smoothly.
3. Block is inserted inside core tray to tell different rock core apart.
4. Paper tag on the top end to remark core information.
5. 30 pieces of core trays can be stacked tightly without falling down.
Pipeline system inflatable air grip union
Seal o grip union air o union are air inflatable connections for low pressure fluid or mud suction and return lines. The seal o grip carbon steel body welds in place on mud tanks or manifold pipe. A leak right seal is achieved with rig supplied compressed air, even if the connecting pipe is not perfectly aligned. The oil and abrasion resistant NBR pneumatic o tube can be inflated up to 200 PSI against the outside diameter of the connecting pipe, speeding field set up and eliminating the need for low pressure flanged connections.
Features
Low requirement to centered when installed, to achieve quick install and seal
The pipeline can be removed without other tools after pneumatic union deflated, adaptable and easy maintenance.
No wrenches, bolts & nuts required.
Fast and easy make up without close alignment.
Pneumatic Tube inflatable up to 200 PSI.
Pipeline system inflatable air grip union
Seal o grip union air o union are air inflatable connections for low pressure fluid or mud suction and return lines. The seal o grip carbon steel body welds in place on mud tanks or manifold pipe. A leak right seal is achieved with rig supplied compressed air, even if the connecting pipe is not perfectly aligned. The oil and abrasion resistant NBR pneumatic o tube can be inflated up to 200 PSI against the outside diameter of the connecting pipe, speeding field set up and eliminating the need for low pressure flanged connections.
Features
Low requirement to centered when installed, to achieve quick install and seal.
The pipeline can be removed without other tools after pneumatic union deflated, adaptable and easy maintenance.
No wrenches, bolts & nuts required.
Fast and easy make up without close alignment.
Pneumatic Tube inflatable up to 200 PSI.
LAKE company can provide the piston assy and piston rod for F series,3NB series and other type of mud pump.
Piston and piston rod are made of high hardness alloy steel,and they are wear-resistant , anti-corrosive and anti-distortion after heat treatment.
The seal of the piston can be made of polyure-thane,polyther material and it can be also made of thiakol rubber.
We have specialized in manufacturing spare parts of mud pump for over 10 years to the worldwide Oil Drilling industry.We stock and sell a wide selection of mud pump fluid end expendables and spares parts.
Mud pump parts for F series mud pump, For P series mud pump, For PZ series mud pump, For 3NB series mud pump.
These parts include liners, pistons, valves & seats,piston rods, rod clamps, extension rods, all
fluid end seals and gaskets, fluid cylinder modules and accessories, as well as power end
components, such as crankshaft assemblies, gear sets, connecting rods, crosshead, and bearings.
Specification:
Our GRE oil pipes and fittings had already certificated by API 15HR and API 15LR.
SPECIFICATION:
a. Diameter Range: 25mm - 1000mm (1" - 40")
b. Rated Pressure Range:, 25MPa
c. Max. Operating Temperature: 110,
Advantages:
(1)High strength, Used for the carriageways directly buried, don,t need concrete cover, Can speed up the construction progress
(2)Flexibility, Resistant to outside pressure and damage
(3)Electric insulation, flame retardant, heat resistant performance is good, can be use for a long time in 130 degrees heat and not easy deformation.
(4)Resistance corrosion, long service life, can resist acid, alkali and salt corrosion; can be used more than 50 years.
(5)Smooth inner wall, protect cable
(6)Sealing circle and socket connection, easy to handling
(7)Light weight, easy to construction, saves cost
(8)Applicability range is wide: Glass fiber reinforced plastic cable protection tube is buried cable laying in the protection work, also used in Cable Bridge, high demand across the occasion.
Application:
(1) City power grid construction and renovation project
(2) City reconstruction project
(3) Aviation airport project construction
(4) Industrial zone, residential project construction
(5) Traffic road , bridge construction
The type of pipe's coupling:
1). Sole sealing ring socket coupling: suitable for medium pressure
2). Double sealing ring socket coupling: suitable for high pressure
3). Socket coupling: suitable for high pressure and heavy-caliber piping
4). Spigot coupling: suitable for high, medium and low pressure piping and fittings' coupling
5). Socket '0' type sealing coupling, nylon clapper '0' wedged lock which mainly apply to axial strength piping
6). Flange coupling: suitable for medium and low pressure piping
Recommended For:
Flexible hose between the riser and manifold or around the ball joint of offshore drilling rigs, specially designed to withstand high pressure.
Tube:
Modified Nitrile. Black. Resists abrasion, corrosion, oil, and up to 20% H2S.
Reinforcement:
Multiple layers of textile fabric and steel cable, with one layer middle rubber placed between cable layers.
Cover:
Fire resistant rubber cover, stainless steel armored to handle abrasion, corrosion, cutting, gouging, oil and weather.
Couplings:
Swaged couplings. Full range of couplings are available, such as hammer unions, flanges, camlock, male thread, etc.
Temperature:
-4 to +200 (-20 to +93) continuous service.
Options:
Accessories such as safety clamps and hose lift eyes are available upon request.
Test:
Each hose is tested at 22500psi for 15 minutes. Pressure test graph, test certificate and letter of conformance are issued for each hose.
Application:
The hose for well contro. high-pressure, fire-resistant and heat-insulation hose assembly is mainly used for the hydraulic control of the BOP for drilling and for hydraulic transmission at high-temperature and flammable places in the metallurgic industry.
Classificatioin:
high molecular polymer jacket type, stainless stell armored jacket type and braided stainless steel wire jacket type.
Pressure:
5,000psi W.P. 10,000 psi Test-15,000 Minimum Burst
Tube:
Modified Nitrile. Black.
Reinforcement:
Multiple layers of textile fabric and steel cable, with one layer middle rubber placed between cable layers.
Cover:
Fire resistant, rubber cover, stainless steel armored to handle abrasion, corrosion, cutting, gouging, oil and weather.
Couplings:
Crimped couplings with over-ferrule fire protection. Temperature: -40°F to +212°F (-40°C to +100°C) continuous service.
Standard:
API 16D SY/T5023.2-2002
World famous brands of Top Drive including Varco, Canrig, NOV, BPM, JH, etc.
Top Drive Parts including Gooseneck, saver sub, IBOP, gear, stuffing box, washpipe, etc.
Lake Petro can supply China made interchangeable parts for above mentioned Top Drive Parts.
If you need any related parts or tools, freely ask me.
Bend is a kind of metal pipe joints with ball bearing, is in the united states FMC company transfer of technology digestion, absorption and production of technical innovation on the base of series products, its specifications are 1"-4", the rated working pressure of 25-140 Mpa(3629 psi- 20000psi), can provide the normal temperature, low temperture and sulfurous gas under the condition of using various typeds of elbow and repair kits.
1. Applicable to connection at locations when drill platform, semi-submersible drilling vessel or drill vessel moves relatively and the installation dimensions of the drill rig subsequently change, and to delivery of oil, gas, mud and other high pressure media(including mainly relief line, blowout control line and choke kill line.)
2. Applicable standard: API Spec 16C.
3. The product features resitance to high preesure, thermal insulation, anti-flaming and fire resistance as well as inner wall with high abrasion resistance.
API Spec 16C Flexible line connection in the choke manifold and kill manifold system.
TEMPERATURE: -20~+121 (Grade B+U)
TUBE:Nitrile rubber, resistant to oil, abrasion, acid & alkali.
REINFORCEMENT:2-8 layers of single high strength steel wire spiral.
COVER:Neoprene, resistant to oil, abrasion and low temperature, weather proof and anti-aging.
ARMORE: Stainless steel armore.
CONNECTION:Welded or integral union, flange or clamp connection form. Special type can be available upon customers' request.
OPTIONAL:Accessories such as safety chain or clamp and hose lift eye & collar clamp are available.
How to contact with us:
Application:
The hose for well contro. high-pressure, fire-resistant and heat-insulation hose assembly is mainly used for the hydraulic control of the BOP for drilling and for hydraulic transmission at high-temperature and flammable places in the metallurgic industry.
Classificatioin:
high molecular polymer jacket type, stainless stell armored jacket type and braided stainless steel wire jacket type.
Pressure:
5,000psi W.P. â?? 10,000 psi Test-15,000 Minimum Burst
Tube:
Modified Nitrile. Black.
Reinforcement:
Multiple layers of textile fabric and steel cable, with one layer middle rubber placed between cable layers.
Cover:
Fire resistant, rubber cover, stainless steel armored to handle abrasion, corrosion, cutting, gouging, oil and weather.
Couplings:
Crimped couplings with over-ferrule fire protection. Temperature: -40�°F to +212�°F (-40�°C to +100�°C) continuous service.
Standard:
API 16D SY/T5023.2-2002
Product Description;
BOP parts: interchangeable 100% with original.
BOP PART NAME: packing element, top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
Technical parameter
Specification:
1. Standad: API 16 A and ISO 9001
2. Rated Pressure: 2000Psi to 15000Psi(14-17 Mpa)
3. Size: Nominal Bore: 7-1/16" to 21-1/4" (179.4mm to 539.75mm)
4. Type: Shear Ram/ Pipe Ram/ Variable Bore Ram
5. Usage : Single Ram BOP/ Double Ram BOP/ Three Ram BOP
6.Brand:Shenkai and Rongsheng.
7.Imitate: Camaron and Shaffer
8.U type and SH type
Characters of BOP pare parts:
In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks.
Blowout preventer with spherical plastic core and dust-proof ring.
Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use.
Working of BOP pare parts:
When wells must be sealed in case of kicks high pressure (10.5Mpa) oil from control systems enters into close-cavity under piston from housing oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer to each other to moce the rubber between them to the center of wellhead so as to seal drilling tools or fully seal wellhead. In opening , hydraulic pressure oul enters into open-cavity above piston from housing oul inlet, to push piston moving downwards , so that plastic will reset with its own elasticity, wellhead will be open.
SUITABLE FOR BELOW BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Specification:
Our GRE oil pipes and fittings had already certificated by API 15HR and API 15LR.
SPECIFICATION:
a. Diameter Range: 25mm - 1000mm (1" - 40")
b. Rated Pressure Range: 25MPa
c. Max. Operating Temperature: 110
Advantages:
(1)High strength, Used for the carriageways directly buried, dont need concrete cover, Can speed up the construction progress
(2)Flexibility, Resistant to outside pressure and damage
(3)Electric insulation, flame retardant, heat resistant performance is good, can be use for a long time in 130 degrees heat and not easy deformation.
(4)Resistance corrosion, long service life, can resist acid, alkali and salt corrosion; can be used more than 50 years.
(5)Smooth inner wall, protect cable
(6)Sealing circle and socket connection, easy to handling
(7)Light weight, easy to construction, saves cost
(8)Applicability range is wide: Glass fiber reinforced plastic cable protection tube is buried cable laying in the protection work, also used in Cable Bridge, high demand across the occasion.
Application:
(1) City power grid construction and renovation project
(2) City reconstruction project
(3) Aviation airport project construction
(4) Industrial zone, residential project construction
(5) Traffic road , bridge construction
The type of pipe's coupling:
1). Sole sealing ring socket coupling: suitable for medium pressure
2). Double sealing ring socket coupling: suitable for high pressure
3). Socket coupling: suitable for high pressure and heavy-caliber piping
4). Spigot coupling: suitable for high, medium and low pressure piping and fittings' coupling
5). Socket '0' type sealing coupling, nylon clapper '0' wedged lock which mainly apply to axial strength piping
6). Flange coupling: suitable for medium and low pressure piping
Hose Loops
Hose loops are suitable for HP discharge pipelines,water supply line,well test lines,cementing slurry lines and other HP supply lines.They are composed of swivel joints and straight pipes,and features by flexibility,stability,quick installation and easy dismantling.They can be easily connected with pumps or other pipes with unions.
There types of hose loops are available:short radius flexible manifold,long radius flexible manifolds and integral type flexible manifolds,with sizes of 1",1-1/2",2",3",4"and pressure of 5000psi-15000psi.
Recommended For:
Flexible hose between the riser and manifold or around the ball joint of offshore drilling rigs, specially designed to withstand high pressure.
Tube:
Modified Nitrile. Black. Resists abrasion, corrosion, oil, and up to 20% H2S.
Reinforcement:
Multiple layers of textile fabric and steel cable, with one layer middle rubber placed between cable layers.
Cover:
Fire resistant rubber cover, stainless steel armored to handle abrasion, corrosion, cutting, gouging, oil and weather.
Couplings:
Swaged couplings. Full range of couplings are available, such as hammer unions, flanges, camlock, male thread, etc.
Temperature:
-4 to +200 (-20 to +93) continuous service.
Options:
Accessories such as safety clamps and hose lift eyes are available upon request.
Test:
Each hose is tested at 22500psi for 15 minutes. Pressure test graph, test certificate and letter of conformance are issued for each hose.
Recommended For:
Flexible hose between the riser and manifold or around the ball joint of offshore drilling rigs, specially designed to withstand high pressure.
Tube:
Modified Nitrile. Black. Resists abrasion, corrosion, oil, and up to 20% H2S.
Reinforcement:
Multiple layers of textile fabric and steel cable, with one layer middle rubber placed between cable layers.
Cover:
Fire resistant rubber cover, stainless steel armored to handle abrasion, corrosion, cutting, gouging, oil and weather.
Couplings:
Swaged couplings. Full range of couplings are available, such as hammer unions, flanges, camlock, male thread, etc.
Temperature:
-4 to +200 (-20 to +93) continuous service.
Options:
Accessories such as safety clamps and hose lift eyes are available upon request.
Test:
Each hose is tested at 22500psi for 15 minutes. Pressure test graph, test certificate and letter of conformance are issued for each hose.
World famous brands of Top Drive including Varco, Canrig, NOV, BPM, JH, etc.
Top Drive Parts including Gooseneck, saver sub, IBOP, gear, stuffing box, washpipe, etc.
Lake Petro can supply China made interchangeable parts for above mentioned Top Drive Parts.
If you need any related parts or tools, freely ask me.
Swivel loop Pup joint is cementing and fracturing equipment delivery High Pressure Fluid Control Products. Widely used in the acidic operating environment (excluding containing CO2, H2S sour gas operating environment) in the high-pressure discharge line, input line, a temporary flow line, well testing, and other high-voltage transmission lines on pipelines.
Pup joint made of high strength steel, with a special toughening process. It uses Acme threaded connection, making it with the demolition convenient, fast, reliable connection, and reliable. Multiple seal design and high precision, to ensure the sealing performance of Pup joint.
1. The integral pup joint is union instead of screw connection on the top, which is more secure and reliable.
2. Easy and quick assembling and disassembling.
3. High strength and low weight.
4. Each technical parameters and performances of pup joints conform to standards of API Spec 6A and can be exchanged with like products internationally.
Pup joint is cementing and fracturing equipment delivery High Pressure Fluid Control Products. Widely used in the acidic operating environment (excluding containing CO2, H2S sour gas operating environment) in the high-pressure discharge line, input line, a temporary flow line, well testing, and other high-voltage transmission lines on pipelines.
Pup joint made of high strength steel, with a special toughening process. It uses Acme threaded connection, making it with the demolition convenient, fast, reliable connection, and reliable. Multiple seal design and high precision, to ensure the sealing performance of Pup joint.
How to contact us?
Specification:
1. The chain encloses the pipe so that the chain shaft enters the bayonet and rotates the handle to rotate the pipe.
2. Protect your life and property, please do not overload it.
3. This product is intended for use only as a rotating pipe, no other purpose.
4. Chain pipe wrenches with specifications of 900mm, 1000mm, 1200mm and 1300mm, the jaws can be rotated 180 degree for installation.
5. Please pay attention to rust prevention.
6. Product standard as GB1200 Chain Pipe Wrench.
Recommended For:
Flexible hose between the riser and manifold or around the ball joint of offshore drilling rigs, specially designed to withstand high pressure.
Tube:
Modified Nitrile. Black. Resists abrasion, corrosion, oil, and up to 20% H2S.
Reinforcement:
Multiple layers of textile fabric and steel cable, with one layer middle rubber placed between cable layers.
Cover:
Fire resistant rubber cover, stainless steel armored to handle abrasion, corrosion, cutting, gouging, oil and weather.
Couplings:
Swaged couplings. Full range of couplings are available, such as hammer unions, flanges, camlock, male thread, etc.
Temperature:
-4 to +200 (-20 to +93) continuous service.
Options:
Accessories such as safety clamps and hose lift eyes are available upon request.
Test:
Each hose is tested at 22500psi for 15 minutes. Pressure test graph, test certificate and letter of conformance are issued for each hose.
Recommended For:
Flexible hose between the riser and manifold or around the ball joint of offshore drilling rigs, specially designed to withstand high pressure.
Tube:
Modified Nitrile. Black. Resists abrasion, corrosion, oil, and up to 20% H2S.
Reinforcement:
Multiple layers of textile fabric and steel cable, with one layer middle rubber placed between cable layers.
Cover:
Fire resistant rubber cover, stainless steel armored to handle abrasion, corrosion, cutting, gouging, oil and weather.
Couplings:
Swaged couplings. Full range of couplings are available, such as hammer unions, flanges, camlock, male thread, etc.
Temperature:
-4 to +200 (-20 to +93) continuous service.
Options:
Accessories such as safety clamps and hose lift eyes are available upon request.
Test:
Each hose is tested at 22500psi for 15 minutes. Pressure test graph, test certificate and letter of conformance are issued for each hose.
Product Main Material:
Steel, HDPE
Quality Control:
Follow the API Q1 quality inspectionstandard. Base on the API 5CT Annex I when design the product.
Applications:
Products are the required parts for oildrill pipes and drill color that can protect the thread of each side of pipe.Mainly Thread protectors can prevent your connector threads and pipe end fromdamaging during handling, transportation and storage.
Product Main Material:
Steel, HDPE
Quality Control:
Follow the API Q1 quality inspectionstandard. Base on the API 5CT Annex I when design the product.
Applications:
Products are the required parts for oildrill pipes and drill color that can protect the thread of each side of pipe.Mainly Thread protectors can prevent your connector threads and pipe end fromdamaging during handling, transportation and storage.
Quality assurance system
A, Strict selection of domestic high-quality hard-line to control theh product quality : using domestic the best materials, such as Bomco Wire Rope Company and Shagang Group.
B, Perfect rod testing equipment: spectrometer, tensile testing machine, metallographic analyzer, high and low times metallographic analyzer.Testing for detection rod into the plant chemical costs, tissue properties and mechanical properties.
C, With perfect wire rope and wire rope testing equipment: medium and small tensile testing machine, torsion testing machine, bending test machine, steel strands-tension fatigue testing machine, wire bending fatigue testing machine, fatigue testing machine wire rope, wire rope pre-tensioning equipment, etc, we can test the the performance of wire rope.
D, Wire rope production process using the advanced North America, Germany management models. Meanwhile, the introduction of technology also brings the foreign advanced production organization and management mode such as quality track record, pre-production equipment, tooling, mold and other inspection records, processing management.
E, Product organizational processes in according to GB/T19001 and APISPECQ1 for quality control.
F, Corresponding to each batch of steel wire rope in accordance with rigorous testing standards, including process and final inspection.
G, Approved by the American Petroleum Institute API Monogram. And had passed the ISO9000 certification.
Shaker screens including but not limited to the following types:
1. Steel Frame Shake Screen
2. Composite Frame Shaker Screen
3. Pyramid Shaker Screen
4. Hook Strip Flat Screen
5. Hook Strip Soft Screen
We provides all the API series screens from API 20 to API 400.
Our shale shaker screens are available for the FLC Series. Brandt VSM, Cobra Series, Mi-Swaco, Derrick, NOV Brant, Swaco Mongoose and KEM-TRON shale shakers, and we accept customized shale shaker screen.
Shaker screens including but not limited to the following types:
1. Steel Frame Shake Screen
2. Composite Frame Shaker Screen
3. Pyramid Shaker Screen
4. Hook Strip Flat Screen
5. Hook Strip Soft Screen
We provides all the API series screens from API 20 to API 400.
Our shale shaker screens are available for the FLC Series. Brandt VSM, Cobra Series, Mi-Swaco, Derrick, NOV Brant, Swaco Mongoose and KEM-TRON shale shakers, and we accept customized shale shaker screen.
Shaker screens including but not limited to the following types:
1. Steel Frame Shake Screen
2. Composite Frame Shaker Screen
3. Pyramid Shaker Screen
4. Hook Strip Flat Screen
5. Hook Strip Soft Screen
We provides all the API series screens from API 20 to API 400.
Our shale shaker screens are available for the FLC Series. Brandt VSM, Cobra Series, Mi-Swaco, Derrick, NOV Brant, Swaco Mongoose and KEM-TRON shale shakers, and we accept customized shale shaker screen.
Shaker screens including but not limited to the following types:
1. Steel Frame Shake Screen
2. Composite Frame Shaker Screen
3. Pyramid Shaker Screen
4. Hook Strip Flat Screen
5. Hook Strip Soft Screen
We provides all the API series screens from API 20 to API 400.
Our shale shaker screens are available for the FLC Series. Brandt VSM, Cobra Series, Mi-Swaco, Derrick, NOV Brant, Swaco Mongoose and KEM-TRON shale shakers, and we accept customized shale shaker screen.
Shaker screens including but not limited to the following types:
1. Steel Frame Shake Screen
2. Composite Frame Shaker Screen
3. Pyramid Shaker Screen
4. Hook Strip Flat Screen
5. Hook Strip Soft Screen
We provides all the API series screens from API 20 to API 400.
Our shale shaker screens are available for the FLC Series. Brandt VSM, Cobra Series, Mi-Swaco, Derrick, NOV Brant, Swaco Mongoose and KEM-TRON shale shakers, and we accept customized shale shaker screen.
Shaker screens including but not limited to the following types:
1. Steel Frame Shake Screen
2. Composite Frame Shaker Screen
3. Pyramid Shaker Screen
4. Hook Strip Flat Screen
5. Hook Strip Soft Screen
We provides all the API series screens from API 20 to API 400.
Our shale shaker screens are available for the FLC Series. Brandt VSM, Cobra Series, Mi-Swaco, Derrick, NOV Brant, Swaco Mongoose and KEM-TRON shale shakers, and we accept customized shale shaker screen.
FAQ
How can I place order?
A: You can contact us by email about your order details, or place order on line.
How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (HSBC bank), Western Union are the most usual ways we are using.
Whatâ??s the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15days if we donâ??t have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
How to contact with us:
Shaker screens including but not limited to the following types:
1. Steel Frame Shake Screen
2. Composite Frame Shaker Screen
3. Pyramid Shaker Screen
4. Hook Strip Flat Screen
5. Hook Strip Soft Screen
We provides all the API series screens from API 20 to API 400.
Our shale shaker screens are available for the FLC Series. Brandt VSM, Cobra Series, Mi-Swaco, Derrick, NOV Brant, Swaco Mongoose and KEM-TRON shale shakers, and we accept customized shale shaker screen.
Shaker screens including but not limited to the following types:
1. Steel Frame Shake Screen
2. Composite Frame Shaker Screen
3. Pyramid Shaker Screen
4. Hook Strip Flat Screen
5. Hook Strip Soft Screen
We provides all the API series screens from API 20 to API 400.
Our shale shaker screens are available for the FLC Series. Brandt VSM, Cobra Series, Mi-Swaco, Derrick, NOV Brant, Swaco Mongoose and KEM-TRON shale shakers, and we accept customized shale shaker screen.
FAQ
How can I place order?
A: You can contact us by email about your order details, or place order on line.
How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (HSBC bank), Western Union are the most usual ways we are using.
Whatâ??s the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15days if we donâ??t have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
Shaker screens including but not limited to the following types:
1. Steel Frame Shake Screen
2. Composite Frame Shaker Screen
3. Pyramid Shaker Screen
4. Hook Strip Flat Screen
5. Hook Strip Soft Screen
We provides all the API series screens from API 20 to API 400.
Our shale shaker screens are available for the FLC Series. Brandt VSM, Cobra Series, Mi-Swaco, Derrick, NOV Brant, Swaco Mongoose and KEM-TRON shale shakers, and we accept customized shale shaker screen.
FAQ
How can I place order?
A: You can contact us by email about your order details, or place order on line.
How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (HSBC bank), Western Union are the most usual ways we are using.
Whatâ??s the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15days if we donâ??t have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
Shaker screens including but not limited to the following types:
1. Steel Frame Shake Screen
2. Composite Frame Shaker Screen
3. Pyramid Shaker Screen
4. Hook Strip Flat Screen
5. Hook Strip Soft Screen
We provides all the API series screens from API 20 to API 400.
Our shale shaker screens are available for the FLC Series. Brandt VSM, Cobra Series, Mi-Swaco, Derrick, NOV Brant, Swaco Mongoose and KEM-TRON shale shakers, and we accept customized shale shaker screen.
The basic principle of the hydrocyclone is to separate the two-phase or multi-phase mixture of liquid-liquid, liquid-solid, liquid-gas and so on with a certain density difference under the action of centrifugal force. The mixed liquid is tangentially flowed into the cyclone with a certain pressure, and a high-speed rotating flow field is generated in the cylindrical cavity. The high density components in the mixture under the action of the swirling flow at the same time along the axial downward movement along the radial outward movement in the reach of the cone down along the wall along the wall, and from the bottom outlet, thus forming The small vortex component moves toward the central axis and forms an upwardly moving internal vortex in the center of the axis, and then is discharged from the overflow port, thus achieving the purpose of two-phase separation.
Polyurethane characteristics:
1, the hardness range is wide, and the elongation and elasticity of the rubber are still under high hardness. The hardness range of polyurethane board is Shao A10-D80.
2, high strength. In rubber hardness under their tensile strength, tear strength and bearing capacity rubber is much higher than general. Under the high hardness the impact strength and flexural strength and is much higher than that of plastic.
3, wear resistance. The wear resistance is very good, about 3-5 times of the rubber.
4, oil resistance. Polyurethane board is a strong polar polymer, and the affinity of non polar mineral oil, in fuel oil and mechanical oil is almost no corrosion.
5, good resistance to oxygen and ozone.
6, excellent absorption performance, can be used to reduce the vibration, buffer effect. In the mold manufacturing industry, alternative rubber and spring.
7, it has good low temperature performance.
8, radiation resistance, high energy - ray properties of the polyurethane, the use of the 10-10 radiation dose is still satisfactory.
9, have good mechanical processing performance. (car, milling, grinding, drilling can be)
Application: widely used in machinery, transportation, oil, mining, construction, textile, sports and other fields.
The company to undertake a variety of specifications of the size of polyurethane products custom processing.
1.Details of ring gauge:
Material:
Ring gauges are manufactured in both steel and tungsten Carbide,other material are availiable.
Sizes:
Ring gauges are manufactured from Inner Diameter 3.5 mm. to 60 mm. Steel ring gauges and master setting rings are manufactured from Inner Dia. 1 mm. to 200 mm.
Description:
Ring gauges have an outer steel casing, which protects the inner carbide ring.
Usage:
Ring gauges are used to check the outside diameter of work pieces. The work piece is inserted into the Inner dia. Of the steel ring. If it passes through the GO ring gauge then it means that the work piece is good for its lower size limit. If the work piece does not pass through the NOGO ring gauge it means that the work piece is OK for the higher size limit. A ring gauge is also effective to check out of roundness on the higher side. A master setting ring is used as a standard to set bore gauges, which can then be used to determine deviation from the master size.
Product Description:
The fracturing pump fluid end blocks and spares are 100% interchangeable to BJ, Gardner Denver, Halliburton, Serva, FMC.
We can supply the Spare Parts for the Pump Models as follow:
HQ 1400 4 fracturing pump SPM2000-5" fluid end
HQ-1400/2000 Frac Pump Fluid End Asembly
SPM-TWS 600 Triplex Plunger Pump
SPM QWS2500 Quintuplex Plunger Pump Compatible
TWS-2000/2250 Frac Pump Fluid End Assembly
Halliburton HT400 plunger pump
Serva TPA600 pump SERVA pump: TPA-400 plunger pump . TPA-600 plunger pump. TPB-600 plunger pump. TPA-400 plunger pump
GD-2500 Quintuplex Plunger Pump Compatible
OPI 1800AWS Frac Pump Compatible
The fracturing pump fluid end blocks and spares are 100% interchangeable to BJ, Gardner Denver, Halliburton, Weir SPM, Serva, FMC.
We can supply the Spare Parts for the Pump Models as follow:
HQ 1400 4 fracturing pump SPM2000-5" fluid end
HQ-1400/2000 Frac Pump Fluid End Asembly
SPM-TWS 600 Triplex Plunger Pump
SPM QWS2500 Quintuplex Plunger Pump Compatible
TWS-2000/2250 Frac Pump Fluid End Assembly
Halliburton HT400 plunger pump
Serva TPA600 pump SERVA pump: TPA-400 plunger pump . TPA-600 plunger pump. TPB-600 plunger pump. TPA-400 plunger pump
GD-2500 Quintuplex Plunger Pump Compatible
OPI 1800AWS Frac Pump Compatible
1.Fluid End Pump Parts:Liners,Piston Rod and Pony Rod,Piston and Hubs,Fluid End Modules
and Accessories, Valve and Seat for all major brand mud pumps.
2.Mud Pump: EMSCO,3NB
3.OCTG Production Equipment: Hydro-Tester, Lengthening Weighing & Marking Equipments
Coupling Application Machine etc.
4.We also offer custom design-built service per our clientâ??s drawings and specifications.
-
All products will be made according to api and related international standard as per customers' requirements.
Integral blade stabilizer is an important tool in the drilling engineering to control the well deviation. It can stabilize the drilling tools in the drilling process of oil, gas and geological exploration. It can increase the bit life, drilling speed and well bore quality. There are two kinds of integral stabilizers: spiral integral blade stabilizer and straight integral blade stabilizer.
Hardfacing type: hf1000, hf2000, hf3000, hf4000
Drawworks Parts:
Air Valves, Brake Bands, Brake Blocks, Brake Flanges, Brake Hardware, Bushings, Catheads (Makeup / Breakout), Cathead Parts, Chains, Clutches, Clutch Friction Linings, Clutch Air Diaphragmâ?? s, Drum Assembly.
Parts we carry fit:
National, Oilwell, Cooper, Cardwell, Skytop, Brewster, Crane Carrier, Franks Cabot and Ideco. Please keep us in mind for all of your drawworks parts requirements.
Flexible Composite Pipe is a kind of composite pipe developed inter- nationally in recent years, its main features are corrosion resistance/ high operation pressure endurance and keeping flexibility at the same time, it can be made into a reel form (continuous pipe), with a length from tens of meters to kilometers in one reel.
Pipe Structure:
Pipe Type:
Steel-cord Reinforced Thermoplastic Pipe
Aramid-fiber-belt Reinforced Thermoplastic Pipe (RTP)
Plastic Steel-belt Reinforced Pipe (PSP)
Glass-fiber Reinforced Pipe (GRP)
Pipe Application:
Land Oil & Gas
Offshore Oil & Gas
Petrochemical Industry
Specification:
Our GRE oil pipes and fittings had already certificated by API 15HR and API 15LR.
SPECIFICATION:
a. Diameter Range: 25mm - 1000mm (1" - 40")
b. Rated Pressure Range: â?¤ 25MPa
c. Max. Operating Temperature: 110â??
Advantages:
(1)High strength, Used for the carriageways directly buried, donâ??t need concrete cover, Can speed up the construction progress
(2)Flexibility, Resistant to outside pressure and damage
(3)Electric insulation, flame retardant, heat resistant performance is good, can be use for a long time in 130 degrees heat and not easy deformation.
(4)Resistance corrosion, long service life, can resist acid, alkali and salt corrosion; can be used more than 50 years.
(5)Smooth inner wall, protect cable
(6)Sealing circle and socket connection, easy to handling
(7)Light weight, easy to construction, saves cost
(8)Applicability range is wide: Glass fiber reinforced plastic cable protection tube is buried cable laying in the protection work, also used in Cable Bridge, high demand across the occasion.
Application:
(1) City power grid construction and renovation project
(2) City reconstruction project
(3) Aviation airport project construction
(4) Industrial zone, residential project construction
(5) Traffic road , bridge construction
The type of pipe's coupling:
1). Sole sealing ring socket coupling: suitable for medium pressure
2). Double sealing ring socket coupling: suitable for high pressure
3). Socket coupling: suitable for high pressure and heavy-caliber piping
4). Spigot coupling: suitable for high, medium and low pressure piping and fittings' coupling
5). Socket '0' type sealing coupling, nylon clapper '0' wedged lock which mainly apply to axial strength piping
6). Flange coupling: suitable for medium and low pressure piping
Shale Shaker Screens are one of the major business for Solids Control. We understand, the cost-effective shale shaker screens are very important for the drilling operations solids control equipment.
So LAKE keeps research and develop the best technology to manufacture top quality shaker screens for our clients.
With our distribution network and cost-effective products, our Shale Shaker Screens are popular around the world.
Screen Type:
1. API RP 13C standard.
2. ASTM standard.
3. MI-Swaco: Replacement Shaker Screen for MI-Swaco MONGOOSE PRO, MONGOOSE PT & MEERKAT, ALS, BEM, MD-3 series shale shaker or mud cleaner. Available in Steel frame or composite frame.
4. Derrick: Replacement Shaker Screen for Derrick FLC 2000, FLC 500 , DP 600 and Hyperpool series shale shaker and mud cleaner. Available in flat screen or pyramid screen.
5. NOV Brandt: Replacement Shaker Screen for NOV Brandt Cobra, King Cobra, Mini Cobra, Venom, LCM-2D, LCM-3D, VSM 300 series and D380/D285P shale shaker and mud cleaner. Available in steel frame or composite frame.
6. Other: Other replacement shaker screen for Fluids System 29x42, Kemtron/Elgin KPT series and other
shale shaker manufacturer. Customized or OEM Shaker Screens are available.
-
Shale Shaker Screens are one of the major business for Solids Control. We understand, the cost-effective shale shaker screens are very important for the drilling operations solids control equipment.
So LAKE keeps research and develop the best technology to manufacture top quality shaker screens for our clients.
With our distribution network and cost-effective products, our Shale Shaker Screens are popular around the world.
Screen Type:
1. API RP 13C standard.
2. ASTM standard.
3. MI-Swaco: Replacement Shaker Screen for MI-Swaco MONGOOSE PRO, MONGOOSE PT & MEERKAT, ALS, BEM, MD-3 series shale shaker or mud cleaner. Available in Steel frame or composite frame.
4. Derrick: Replacement Shaker Screen for Derrick FLC 2000, FLC 500 , DP 600 and Hyperpool series shale shaker and mud cleaner. Available in flat screen or pyramid screen.
5. NOV Brandt: Replacement Shaker Screen for NOV Brandt Cobra, King Cobra, Mini Cobra, Venom, LCM-2D, LCM-3D, VSM 300 series and D380/D285P shale shaker and mud cleaner. Available in steel frame or composite frame.
6. Other: Other replacement shaker screen for Fluids System 29x42, Kemtron/Elgin KPT series and other shale shaker manufacturer. Customized or OEM Shaker Screens are available.
-
Rod bop to prevent the leakage of oil and gas in the recovery operation control device, can guarantee the well-flushing, sand washing, fracturing downhole operation smoothly. By changing different valve core, and can meet the needs of all kinds of rod seal. Product design is reasonable, simple structure, convenient operation, reliable sealing, long service life and is one of indispensable tools in oil field work.
Cup Tester
"F" type Cup Tester assemblies are designed to be attached to the drill string and then running into the casing beneath the wellhead to pressure test the blowout preventer stack and the wellhead. When the F type Cup Tester is running into the casing beneath the wellhead, pressure is applied to either a test pump, or by hoisting the "F" type cup after filling the hookup with water. The latter method is fast and accurate.
The Cup Tester assemblies are rated to the
API standard mill test pressure for casing sizes up to 10,000 psi. Hanlling has the sizes, pressure ratings and connections for every single one of your jobs.
Hanlling Cup Tester assemblies come standard with internal flush (IF) connections.
Other connections are available at an additional cost.
Anytime the "F" type Cup Tester is used; care should be taken to ensure that the drill pipes load capacity is not exceeded. This can be checked by adding the weight of the suspended pipe to the vertical load due to pressure. To find this multiply the cup pressure area (IN.2) by the pressure. The table below shows the total load capacity for each size tester.
When ordering please specify:
1. Casing size & weight
2. Part number
3. OD, ID, and drift diameter.
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable.
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
APPLY TO BELOW BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
-
1. About the Manual
The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over).
2. ADVANTAGES OF DOWNHOLE MOTOR
Increased rate of penetration.
Better hole deviation control.
Reduction in drill string failure rate.
Reduction in wear and tear of the swivel, Kelly, and rotary drives.
Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
3. CONSTITUTION
Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) :
Crossover Sub
Safety Catch Sub
Power Section
Coupling Assembly
Bearing Assembly
-
The dies and Jaws are made of high-quality alloy steel in SAPWELLS.
They are chemically heart-treated for surface hardness.
They are wear-resisting and corrosion-resisting and they have a long service life.
We can also design and manufacture special inserts according to customer's requirement.
The Hammer Union type mainly consists of Figure 100, Figure 200, Figure 206, Figure 300, Figure 400, Figure 600, Figure 602, Figure 1002, Figure 1003, Figure 1502 and Figure 2002, figure 2202
Hammer Union
We can provide various hammer unions based on the introduced technologies from other country,including thread connection type,welding type and H2S service unions.1"-6" and CWP of 1000psi-20,000psi unions are available.For easy identification,unions with different pressure ratings will be painted in different colors,and there are evident marks indicating size,connecting mode and pressure ratings.
Seal rings are made of quality rubber compound which greatly enhance load-bearing capacity and sealing performance and protect connectors from erosion.Different pressures and applications have different sealing method.
Fast Installation
Wherever they are,wing nuts and right ACME will ensure quick installation or dismantling without special tools.
Highly Interchangeable
All unions are made in American system,and can be interchanged with products in international market.Seal rings are fully interchangeable with equivalent products;Marks of size and pressure in wing nuts are formed in die-forging model,same as international products.
1.Introduction:
Wellhead Wireline Pressure Control Equipment is used for testing and paraffin treatment in flowing oil well, gas well, water injection well and coalbed methane testing. The unit supplies buffer and transitional area for string running with pressure to hole, could satisfy the wellhead seal requirement and there is no overflow. Simple operating, safe and reliable function. Working pressure is 10MPa, 21MPa, 35MPa, 70MPa and 105MPa. Standard ID is 30mm, 52mm, 62mm (65mm), 76mm(78mm), 89mm, 102mm(103mm), 120mm, 140mm, 160mm and 180mm. Our factory has the ability to design products to adapt to different environment according to clients ' requirements.
The whole Wellhead Wireline Pressure Control Equipment is composed of Grease Injection Control Head, Top Catcher, Lubricator, Bottom Catcher (include testing blowout assly), BOP, Pump-in Tee, Up sheave, Down sheave, Crossover Flange, Quick testing Assly, all kinds of pipes and other components which necessary.
2.Features and Benefits:
1.Grease Injection Control Head is operated by remote hydraulic manual pump, which could seal wellhead in time and promise safety of operation. A lube oil cup mounted on top of Grease Injection Control Head, which is as lubricator for downing cable and assistant for setting tools in well.
2.Top and Bottom Catcher is double safe feature, in order to prevent string tools dropping in well. Top Catcher is by hydraulic remote control, Bottom Catcher has manual operation system if hydraulic system is fault. There is pressure testing blowout sub, which for checking wellhead pressure, releasing left pressure in Lubricator and pressure self-check.
3.Lubricator supplies buffer and transitional area for string tools, which connected by many Union Lubricators. Single Lubricator is 0.8â??3m, the number of lubricator and total length could be decided by operation. Titanium alloy Lubricator is much better quality and lightweight than normal steel materials.
4.BOP could be separated by Single, Dual, Triple and Quad Ram. Hydraulic or Manual control.
5.There is antifreeze& unfreeze and pressure self-check system.
6.Quick testing Assly could improve the safety of BOP, then avoid the second pressure self-check.
7.Up& Down sheave is selected of Aluminium alloy, and has the function of preventing cable jump.
8.Transport and Storage Frame could accommodate full set of Pressure Control Equipments. Has the ability of designing and producing as requirements.
9.According to different service conditions, our factory supply HP/HT Wellhead Wireline Pressure Control Unit with H2S&Acid services.
Casing Slips Type UC-3 are multisegment slips with of 3 in/ft on the diameter taper slips(except size 8-5/8"). Every segment of one slip is forced equally while working.Thus the casings could keep a better shape. They should work together with spiders and insert bowls with same taper. The slips are designed and manufactured according to API Spec 7K.
Description:
The packing element for Annular BOP FH35-35 is a special high performance product. The packing element is combined by the main body which is made up of the independent innovation rubber based polymer alloy material and the high strength metal frame, which conforms to the USA 16A, SATM D412, D624, D2240 and D471 standard. It is suitable for the drilling work on the oil field, which shares a high cost performance comparing to the other same type packing elements. And the repair seal kits are equipped.
Features:
1Standar: API 16A and ISO9001
2.Type: Annular and Taper
3.Usage: Annular Blowout Preventer/ Annular BOP
4.Brand: Shenkai, and Rongsheng
5.Imitate: Camron,Shaffer
6.China Top Quality and best price
LAKE Reverse Circulation Junk Basket (RCJB) is designed to remove all types of small junk objects from the hole. The tool�¢??s main feature eliminates pulling a wet string. Even when the tool is fitted with a magnet insert, reverse circulation is maintained.
Operation:
LAKE Reverse Circulation Junk Basket is made up to the bottom of the fishing string and lowered to a point within several feet from the bottom of the hole. Begin circulation to wash the hole. Stop circulation and drop the steel ball. (When the steel ball is dropped into the valve seat, circulation fluid travels outward and downward through the inner passage of the barrel and out through the vents in the lower end. The fluid is then deflected to the center of the tool and up through the return holes in the upper end of the barrel. This reverse fluid circulation carries the junk into the barrel above the junk catcher.) Begin circulation again, slowly rotating while lowering the tool until a 10�¢?? core has been cut. Stop rotation and circulation and pull the tool from the hole.
CMS-XL Casing Slips are made up of body segments of the same sizes linked up by Hinge Pins.Adding or reducing body segments and changing button inserts according to the specification can suit different sizes of casings pipes.The buttion inserts can be used in both Casing Slips and Drilling Collar Slips.Eight different kinds of button inserts will satisify all needs.
1.Casing Slips can accommodate casing from 65/8 to 30 inch (168.3-762mm) O.D.
2.Full range of Replacement Part
The lightweight Lubricators enable the wireline tool string to be introduced or retrieved from a well bore under pressure. The lubricator can be used singly also can use multiply according to the requirement of the oilfield operation, but the seal control head always be assembled on the top of the lubricator. Single Lubricator is 0.8-3m, the number of lubricator and total length could be decided by operation. Titanium alloy Lubricator is much better quality and lightweight than normal steel materials.
The lightweight Lubricators usually consists of four basic parts: a quick union collar, a male quick union, a lubricator tube, and a female quick union.
Casing Cutters
When the entire drill string cannot be recovered, Roschen casing cutters are the perfect tool to minimize loss.
Single blade "Bradley Style" and dual blade casing cutters are available in all industry standard sizes.
Casing Cutter Assembly
The casing cutter assembly is for cutting steel pipe underground. Our unique downhole hydraulic pipe cutter applies smooth constant pressure onto three knives via a piston assembly, thereby assuring clean and rapid cutting. Once the device is lowered to the desired depth where water pressure can be applied, it begins rotating. The cutting blade normally makes cuttings before water pressure reaches to 150 to 200 PSI. CDGâ??s casing cutter assembly includes AW, BW, NW and HW.
Casing Cutters Functions:
1. When a string of casing is stuck in a drill hole , a portion of it can be salvaged by cutting the casing above the stuck zone with a casing cutter. The casing can be cut at any desired point in the string.
2. The cutter connects directly to the drill rods and the pressure of the circulating water against a piston forces the steel or tungsten carbide tipped cutters out against the casing. After the casing is cut the pressure is released and the cutters retract.
Features:
1. Used for cutting NW casing or HRHP/H/HM rod at any point in a drill hole when the entire string can not be retrieved.
2. NW NWL HW HWL rod box connection.
3. Each knife is made of crushed tungsten carbide.
4. To make these cutters more practical, our downhole hydraulic pipe cutters are designed with fully interchangeable internal components.
5. In fact, the only difference of various casing cutter assembly is the size of heavy duty cutter body. This means there are fewer parts in need of repair and replace. Therefore, you need not to buy and stock casing cutters' components in order to run and maintain cutter with multiple sizes.
Applications:
1. Upon lowering the assembly, the cutting lugs are retracted inside the body by the spring. With low rotation (25 rpm) initially, the cutting lugs are forced out using water pressure, 1 380 kpa (200 psi). A drop in pressure indicates that the cutting operation is complete.
2. AW, BW, NW, HW/HWT casing cutter all is available.
3. Used for Odex drilling system
4. Pipe casing for difficult rock formations
The Hammer Union type mainly consists of Figure 100, Figure 200, Figure 206, Figure 300, Figure 400, Figure 600, Figure 602, Figure 1002, Figure 1003, Figure 1502 and Figure 2002, figure 2202
Hammer Union
We can provide various hammer unions based on the introduced technologies from other country,including thread connection type,welding type and H2S service unions.1 6
and CWP of 1000psi 20,000psi unions are available. For easy identification,unions with different pressure ratings will be painted in different colors,and there are evident marks indicating size,connecting mode and pressure ratings.
Seal rings are made of quality rubber compound which greatly enhance load-bearing capacity and sealing performance and protect connectors from erosion. Different pressures and applications have different sealing method.
Casing Cutters
When the entire drill string cannot be recovered, Roschen casing cutters are the perfect tool to minimize loss.
Single blade "Bradley Style" and dual blade casing cutters are available in all industry standard sizes.
Casing Cutter Assembly
The casing cutter assembly is for cutting steel pipe underground. Our unique downhole hydraulic pipe cutter applies smooth constant pressure onto three knives via a piston assembly, thereby assuring clean and rapid cutting. Once the device is lowered to the desired depth where water pressure can be applied, it begins rotating. The cutting blade normally makes cuttings before water pressure reaches to 150 to 200 PSI. CDGâ??s casing cutter assembly includes AW, BW, NW and HW.
Casing Cutters Functions:
1. When a string of casing is stuck in a drill hole , a portion of it can be salvaged by cutting the casing above the stuck zone with a casing cutter. The casing can be cut at any desired point in the string.
2. The cutter connects directly to the drill rods and the pressure of the circulating water against a piston forces the steel or tungsten carbide tipped cutters out against the casing. After the casing is cut the pressure is released and the cutters retract.
Features:
1. Used for cutting NW casing or HRHP/H/HM rod at any point in a drill hole when the entire string can not be retrieved.
2. NW NWL HW HWL rod box connection.
3. Each knife is made of crushed tungsten carbide.
4. To make these cutters more practical, our downhole hydraulic pipe cutters are designed with fully interchangeable internal components.
5. In fact, the only difference of various casing cutter assembly is the size of heavy duty cutter body. This means there are fewer parts in need of repair and replace. Therefore, you need not to buy and stock casing cutters' components in order to run and maintain cutter with multiple sizes.
Applications:
1. Upon lowering the assembly, the cutting lugs are retracted inside the body by the spring. With low rotation (25 rpm) initially, the cutting lugs are forced out using water pressure, 1 380 kpa (200 psi). A drop in pressure indicates that the cutting operation is complete.
2. AW, BW, NW, HW/HWT casing cutter all is available.
3. Used for Odex drilling system
4. Pipe casing for difficult rock formations
Drift is a simple and general tool designed to measure inside size of casing, tubing, drill pipe and other pipes.
Our Services:
1.High quality products with favorable price at right delivery.
2.Customized products.
3.Warranty.
4. When enquiry, please kindly advise below:
Size: drift size & casing (tubing) spec if necessary
Material: metal/ nylon or something else
Quantity
Port of destination if you need CNF or CIF price
Your ideal delivery date if you need the goods urgently
The lightweight Lubricators enable the wireline tool string to be introduced or retrieved from a well bore under pressure. The lubricator can be used singly also can use multiply according to the requirement of the oilfield operation, but the seal control head always be assembled on the top of the lubricator. Single Lubricator is 0.8-3m, the number of lubricator and total length could be decided by operation. Titanium alloy Lubricator is much better quality and lightweight than normal steel materials.
The lightweight Lubricators usually consists of four basic parts: a quick union collar, a male quick union, a lubricator tube, and a female quick union.
Product Description
Detailed Product Description:
Automatic Trip Hammer is produced as per BS1377: Part9:1990 for carrying out the Standard Penetration Test (SPT).
The Automatic Trip Hammer comprises following parts:
a) A weight made of steel and provided with an axial hole with a diameter which is 3 mm to 4 mm larger than that of the guide rod. It is of 63.5 kg.
b) A pick-up and release mechanism to ensure that the weight has a free fall of 760 mm and shall not influence the acceleration and deceleration of the weight or the rods.
c) An inner guide shaft to permit the weight to drop with minimal resistance, and to ensure the weight strikes the anvil squarely.
d) An anvil made of steel with an integral threaded portion to connect squarely and rigidly on to the top of the uppermost extension rod.
In order to carry out the Standard Penetration Test (SPT) to BS 1377:Part 9:1990. The Auto Trip Hammer, SPT Drive Rods and a Split Tube Sampler are worked together.
Technical Parameters
The basic operation of the complete set Standard Penetration Equipment are like the following sketch shows.
Description of goods:
SPT Split Tube Sampler is for doing the Standard Penetration Test (SPT). We manufacture it according to BS 1377: Part 9: 1990. A Top ball valve Adaptor, a pair of Split Spoons, and an open SPT Shoe compose a complete set of SPT Sampler. Both plastic type and steel type basket retainers are available. The ball valve adaptor prevents sample from being washed out of the sampler when the sampler is withdrawn from the borehole. A 60 degree nose cone and long solid rod with 60 degree point are available as well. The screw connection on the top adaptor depends on the type of drill rods being used to drive the sampler, but is most frequently 1.1/2" B.S. Whitworth, NWY Rod, BW or AW Rod.
Split Spoon compose of Sample Spoon Head, Split Tube, SPT Adaptor, SPT Shoe.
The standard Split Tube Sampler is 2" (50.8 mm) OD x 1.3/8" (34.9 mm )ID x 18" (457mm)/ 24" (610 mm) long. For heavy driving conditions, the Heavy-duty "Tuflok" design is available.
Components:
1. Ball Valve Adaptor
2. SPT Solid Rod
3. SPT Nose Cone
(2). Split Tubes
(3). Basket Retainer
(4). SPT shoe
LAKE'S friction have 42mm, 45mm, 48mm etc, which can make up and break up tools easily and conveniently based on very competitie price.
Marine Casing cutter is one of tools which cuts the casing internally. It uses water horsepower to drive cutters work, It has structure reasonable and convenient maintenance, faster cutting speed. When cutting multi-layer non-concentric casings, It could bear drastic shaking. Strong cutter arms can extend to 5 times as much as body diameter, so that get max stability performance under all kind of disadvantage cutting condition( including hard point, concentric, cutting discontinuity), such as 13-3/8" marine cutter body diameter is just 11-3/4", but the max cutting range of pipes reach 60".
Shaker screens including but not limited to the following types
Steel Frame Shake Screen
Composite Frame Shaker Screen
Pyramid Shaker Screen
Hook Strip Flat Screen
Hook Strip Soft Screen
We provides all the API series screens from API 20 to API 400.
Our shale shaker screens are available
Each tong torque system consists of a tension load cell that converts line pull into a hydraulic pressure signal, which it sends to a pressure-sensing gauge through an interconnecting Hydraulic Hose. Each system also includes mounting hardware.
Features:
1) Systems designed and build for the rugged requirements of the oil filled
2) Load Cell's are designed to ensure a long service life with minimum maintenance
3) 6"Fluid filled gauge has years of proven reliability and ease of maintenance
4) Target pointer on gauge helps operator maintain accurate torque
We are also a proud member of the China Pressure Gauge Association.With many years experience,our company specialized in the YK series of Mud Pump Pressure gauges and other oilfield related instruments. we have a strong network that allows us the ability to design and customize. We currently produce over 30 different styles of instruments for various industries that include the oil exploration, chemical industry, chemical fiber industry, iron and steel industry, metallurgical industry, power generation plants, scientific research and so on.we never stop upgrading our technology. We are continually developing new products to meet the more customers'need.
Shaker screens including but not limited to the following types:
1. Steel Frame Shake Screen
2. Composite Frame Shaker Screen
3. Shaker Screen
4. Hook Strip Flat Screen
5. Hook Strip Soft Screen
We provides all the API series screens from API 20 to API 400.
Rod bop to prevent the leakage of oil and gas in the recovery operation control device, can guarantee the well-flushing, sand washing, fracturing downhole operation smoothly. By changing different valve core, and can meet the needs of all kinds of rod seal. Product design is reasonable, simple structure, convenient operation, reliable sealing, long service life and is one of indispensable tools in oil field work.
Cup Tester
"F" type Cup Tester assemblies are designed to be attached to the drill string and then running into the casing beneath the wellhead to pressure test the blowout preventer stack and the wellhead. When the F type Cup Tester is running into the casing beneath the wellhead, pressure is applied to either a test pump, or by hoisting the "F" type cup after filling the hookup with water. The latter method is fast and accurate.
The Cup Tester assemblies are rated to the
API standard mill test pressure for casing sizes up to 10,000 psi. Hanlling has the sizes, pressure ratings and connections for every single one of your jobs.
Hanlling Cup Tester assemblies come standard with internal flush (IF) connections.
Other connections are available at an additional cost.
Anytime the "F" type Cup Tester is used; care should be taken to ensure that the drill pipes load capacity is not exceeded. This can be checked by adding the weight of the suspended pipe to the vertical load due to pressure. To find this multiply the cup pressure area (IN.2) by the pressure. The table below shows the total load capacity for each size tester.
When ordering please specify:
1. Casing size & weight
2. Part number
3. OD, ID, and drift diameter.
Lifting cap is a special tool for lifting of drilling tools in petroleum, natural gas, drilling engineering and geographical exploration.
Back pressure valve (inside bop/ gray valve) is a heavy-duty drop check valve that is positioned in the drill string to control formation pressure during kicks. It controls the backflow through the inside of the drill pipe itself, preventing damage to the swivel, drilling hose, standpipe and circulation equipment. During normal circulation of drilling fluids down the drill pipe, the valve remains open to permit the flow through it. A conical plug, or dart, minimizes the erosive action of the drilling fluid on the valve seat and assures a long lasting seal between the valve dart and valve seat.When any backflow occurs, the valve closes automatically to contain it, protecting the drilling equipment as well as controlling the kick that could otherwise lead to a blowout.
Ball type full opening safety valve is designed to be stabbed into the top joint of drill pipe or tubing at the rig floor and closed quickly in case a well kicks. After weight material is added to the mud, the kelly can be reconnected, the safety valve opened, and circulation initiated.
Like the kelly valve, the safety valve is full opening. The ball-type design permits the valve to be compact, easy to handle, and yet have great strength. Standard test pressure is 10, 000 pounds, but higher pressure ratings are available.
API 6A Standard spacer spool and drilling spool
1. Standard: API
2. Pressure:2000PSI-20000PSI
3. Size: 3 1/8"--26 3/4"
Spacer spool, in accordance with API 6A, have end connectors of the same size, rated working pressure and design. Spacer spool is wellhead sections which have no provision for suspension of tubular members and which may have no provision for sealing of tubular members
We manufacture the spacer spool in all sizes and pressure ratings suitable for Well Head extension, B.O.P. spacing, and Choke, Kill, and Production Manifold applications. spacer spool usually has the same nominal end connections. spacer spool identification consists of naming each end connection and the overall length (outside of end connection face to outside of end connection face).
We can produce all kinds of API 6A double studded adapter for ellhead use. It is the important device to connection the defferent flange for wellhead, so the material of the body and studs and nuts shall be conforms the related requirements. The size is in accordance with API flange certification.
DSA (Double Studded Adapter)
API 6A 10000PSI 7-1/16" Double Stud Adapter
7-1/16"x13-5/8"
5000psi,10000psi,15000psi
API 6A
Materials:AISI4130
API 6A 10000PSI 7-1/16" Double Stud Adapter
7-1/16"x13-5/8"
5000psi,10000psi,15000psi
API 6A
Materials:AISI4130.
Characters:
In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks.
Blowout preventer with spherical plastic core and dust-proof ring.
Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use.
Working Principle:
When wells must be sealed in case of kicks high pressure (10.5Mpa) oil from control systems enters into close-cavity under piston from housing oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer to each other to moce the rubber between them to the center of wellhead so as to seal drilling tools or fully seal wellhead. In opening , hydr aulic pressure oul enters into open-cavity above piston from housing oul inlet, to push piston moving downwards , so that plastic will reset with its own elasticity, wellhead will be open.
When you have any demands on BOP, BOP ram, Ram Packers and packing element, freely contact me for best quotation. We can provide you various brand and type product.
Specification:
Our GRE oil pipes and fittings had already certificated by API 15HR and API 15LR.
SPECIFICATION:
a. Diameter Range: 25mm - 1000mm (1" - 40")
b. Rated Pressure Range: â?¤ 25MPa
c. Max. Operating Temperature: 110â??
Advantages:
(1)High strength, Used for the carriageways directly buried, donâ??t need concrete cover, Can speed up the construction progress
(2)Flexibility, Resistant to outside pressure and damage
(3)Electric insulation, flame retardant, heat resistant performance is good, can be use for a long time in 130 degrees heat and not easy deformation.
(4)Resistance corrosion, long service life, can resist acid, alkali and salt corrosion; can be used more than 50 years.
(5)Smooth inner wall, protect cable
(6)Sealing circle and socket connection, easy to handling
(7)Light weight, easy to construction, saves cost
(8)Applicability range is wide: Glass fiber reinforced plastic cable protection tube is buried cable laying in the protection work, also used in Cable Bridge, high demand across the occasion.
Application:
(1) City power grid construction and renovation project
(2) City reconstruction project
(3) Aviation airport project construction
(4) Industrial zone, residential project construction
(5) Traffic road , bridge construction
The type of pipe's coupling:
1). Sole sealing ring socket coupling: suitable for medium pressure
2). Double sealing ring socket coupling: suitable for high pressure
3). Socket coupling: suitable for high pressure and heavy-caliber piping
4). Spigot coupling: suitable for high, medium and low pressure piping and fittings' coupling
5). Socket '0' type sealing coupling, nylon clapper '0' wedged lock which mainly apply to axial strength piping
6). Flange coupling: suitable for medium and low pressure piping
Satety clamps type C and Type T are necessary tools for handling flush joint pipe and drill collar , They can accommodate pipes from 1 /1/8 to 15 5/8 inch. they are designed and manufactured according to API 7K Specification for drilling and well servicing equipment.
Satety clamps type MP are necessary tools for handling flush joint pipe and drill collar and small shoulder pipes, they could adjust pipes of different sizes by changing the quantity of chain links. they are designed and manufactured according to API 7K Specification for drilling and well servicing equipment.
Roller Kelly Bushings can be classified as two types based on different ways of drive, square drive and pin drive. Also they can be classified as three types based on different style, heavy, medium and light-duty. They are used for 17 1/2 to 49 1/2inch rotary tables. They are designed and manufactured according to API Spec 7K.
Lifting cap is a special tool for lifting of drilling tools in petroleum, natural gas, drilling engineering and geographical exploration.
Kelly Valve also named Kelly Cock/Drill Pipe Safety Valve allowing free passage of drilling fluid without pressure loss. The valve can be used as a dill pipe safety valve or upper Kelly valve to control blowout pressures, or as a lower Kelly Valve to prevent loss of drilling fluid when the Kelly is disconnected. It has
a pressure rating of 5,000psi or 10,000psi or 15,000psi
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable.
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
APPLY TO BELOW BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Description:
F1600 pump unit is used for transporting high viscosity, large proportion, higher sediment concentration
drilling fluid to the well bottom in high pressure, for cooling the bit, wash the bottom, break the rock, and
carry out rock cutting when return from the well bottom. It is one the main process equipment of oil drilling
operation.
F1600 electric pump unit is consist of mud pump, DC motor, small base, big base, belt transmission system, spray system, pressure relief manifold and charging system etc. DC motor is installed on independent skid, and fixed integrally on the big base behind the F1600 pump. Motor power is transmitted to mud pump from input shaft by belt, then drive the mud pump. Small base is equipped with a regulating screw, which can adjust the elasticity of belt. The matching electric spray pump is used to cool hydraulic end piston, cylinder liner, thus to make sure they work properly.
API Standard
F1600 pump unit meets the requirements of API 7K drilling and wellhead equipment
operation specifications and SY/ T5138 standards.
The drill pipe power tong is an ideal oil drilling wellhead tools, widely used in marine, land drilling and workover operations on unloading column threaded operations. Use of this clamp can play safety, effort to improve the ergonomics of the role. The series clamp, open type, be free to disengage
the column, the mobile; set torque clamp and spinner clamp atone shackle on alternative catwork, tongs and spin rope. The tongs are in line with norms SY/T5074 standards and API Spec 7K.
The Casing Tong KHT9625 is used make up and break out for casing operation in oil fields. It has greatly reduced the labor of worker, enhanced connection quality of thread and diminished accidents in inappropriate casing operation.
1. Steel Frame:
Constructed with two or three 304 or 316 stainless steel wire cloth layers with a steel backing plate and steel frame combined together. Because of different mesh size and hole size, get a better filtering effect.
The bottom high strength steel frame, supporting bar with the moderate tension screen cloth, combined together. Infinitely enhance the screen intensity and endurance, get a better filtering effective. Mesh sizes ranging from 20 to 325. The whole cloth is divided into independent small surfaces, prevent the part excessive expansive damaged, with a special rubber plug together to repair damage, can save the time to replace the screen, Increase the efficiency and reduce the cost.
2. Compatible Frame:
Composite Frame Shaker Screen is made by polyurethane material frame with two or three layers 304 or 316 Stainless steel wire cloth, Main feature as follows:
High strength plastic frame and moderate tension screen cloth that from a reliable whole, greatly enhance the tolerable.
The screen is divided into several independent small cloths to pervent excessive expansion of local damage.At the same time, With a special rubber plug to repair damage, it can save time and reduce use-cost.
Rapid wedge tensioning devices make screen installation more convenient, and save the time of machine half for changing.
Excellent polyurethane material frame enhance corrosion resistance, have a good stock absorption and ectend working life of screen.
We can supply many spare parts of slurry pump. OEM pump part is welcome.
Material options:
-High Chrome alloy
-Grey Iron
-Cast Iron
-Rubber
-Polyurethane
-OEM Pump Parts:
Metal impeller is made of high chrome alloy, SA05,SA49, anti-abrasive, SA33 anti-corrosive
Rubber impeller is made of SR26,SR55, SR33
Polyurethane material is available.
Brief introduction:
-Spare parts in anti-abrasion high chrome cast iron alloy.
-Largest weight of single workpiece can be 13t.
-Largest outside diameter of workpiece can be 5m
-Manufacture other mechanical parts according to your drawing.
Product Main Material:
Steel, HDPE
Quality Control:
Follow the API Q1 quality inspectionstandard. Base on the API 5CT Annex I when design the product.
Applications:
Products are the required parts for oildrill pipes and drill color that can protect the thread of each side of pipe.Mainly Thread protectors can prevent your connector threads and pipe end fromdamaging during handling, transportation and storage.
Specifications:
API & PDO Sucker rod pump
1. API standard
2. fast delivery time
3. competitive pric
4. Tubing size:15-40 in. OD
5. Pump bore: 125-475
6. Barrel length:8-30ft
7. Plunger length:2-7ft
The rod pump plunger is directly connected to the sucker rod string, and may be tripped into and out the tubing with the barrel together with no need to pull out the tubing string, which can reduce maintenance time and downtime.
The life span of tubing can be prolonged by decreasing times of turning on and off the tubing thread and the time of working over is also shortened. The rod pump can be classified into two types of mechanical seating and cup seating. Also, it is divided into three types as RHA (stationary heavy well barrel top anchor rod pump), RHB (stationary heavy well barrel bottom anchor rod pump) and RHT (traveling heavy well barrel bottom anchor rod pump).
The pump barrel is anchored on the top by a holder. This type of rod pump is suitable for sand production well since the fluid discharged from the guide cage washes away the sand between tubing and the top of the pump. But the pump barrel is more subjected to inside pressure and tensile load caused by the fluid column, and the plunger clearance will intend to increase during up stroke so the top anchored pumps are not recommended in deep wells
This structure has the following advantages
When the rod pump is running, fluid discharged from the guide cage flushes sand sedimentation away
The standing valve at the bottom of the pump is apt to immerse in the well fluid, therefore, it is applicable to the well with low fluid level
the top anchor mode helps the pump to keep in free suspension state and provides with self-alignment effect, therefore, it is applicable to the deviated well
the pump barrel functions as a gas anchor, making these pumps suitable for gassy wells
Compared with the bottom anchor rod pumps, the pump is more suitable for oil wells with heavy oil. However, it is not suitable for deep oil wells because the internal pressure and tension caused by the fluid column is likely to cause the pump barrel to expand, and enlarges plunger clearance.
1.Users can choose different reamer on the basis of working soil layer and expanding demand.
2.Barrel reamer are suitable for claypan.
3.Sand and pebbles layer we suggest fluted type reamer.
4.Wide range of connect type.Can be connected with octagon,pin&box tool joint,drill pipe,also can be connected with swivel directly.
Our Clamping Jaws can be supply for HDD drilling machine Ditch Witch, Cash, American Auger, or produce according to your size/drawings. We will check and back very quickly if you have any demand.
Quality service:
1.Test Report & MTC
2.Ready stock for normal sizes
3.Customized sizes welcomed
4.One stop service
1. The chain encloses the pipe so that the chain shaft enters the bayonet and rotates the handle to rotate the pipe.
2. Protect your life and property, please do not overload it.
3. This product is intended for use only as a rotating pipe, no other purpose.
4. Chain pipe wrenches with specifications of 900mm, 1000mm, 1200mm and 1300mm, the jaws can be rotated 180° for installation.
5. Please pay attention to rust prevention.
6. Product standard as GB1200 Chain Pipe Wrench.
Specification:
1).size: 2'', 3'', 4''
2).working pressure:6000-20000psi(42Mpa-140Mpa)
3).working temperature: -29°C~121°C.
4).application enrvironment: standard or H2S
5).Standard: API standard
Introduction:
1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA.
2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa).
3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space.
4. Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load.
5. All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment.
6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced.
7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.
Our company manufactures Wireline Drill Rods, BQ, NQ, HQ, PQ, PHD, Parallel Threaded Drill Rods, DCDMA Sizes AW, BW, NW, HW, and Metric sizes 42 mm, 50 mm, 60 mm to 90mm.
Note:
1. Thread oil should be used when screwing the drill rod and hammer knocking should be prohibited.
2. The drill rod stand should have buffer materials, like wood, rubber, and more. The contact between the threaded ends and iron tools should be forbidden.
3. During the relocation of drill rod, the thread protector should be screwed on the threaded parts so as to protect it from damages.
Dual-wall drill pipes is used for R. C. drilling, when it works, circulating medium is following through the gaps between the dual-wall pipes, carrying samples out of the holes efficiency, meanwhile, it can protect the hole from collapse, matching up with our R.C. air(water) swivel, GQ air-driven hollow DTH hammer can complete getthe samples constantly.
Extension rod, other names are Extension drill steel, Extension drill rod, and Extension steel, M/F rod ( Speed rod ), Produce Hexagonal and round cross sections, Hexagon rods are more rigid, heavier and transfer energy more efficiently, while increasing flushing. Round rods are generally lighter than hexagonal rods and are normally used in extension drilling applications. With the longer steel tending to be larger in diameter, conventional
Drifter rod, another names are tunneling steels, tunneling rod, drifting drill rod, has Round and hexagon rod available, most of drifting drill steel with drill Steel Hexagon is for tunneling and drifting drilling application. Hexagon rods are more rigid, heavier and transfer energy more efficiently, while increasing flushing.
Main Products:
1-12 inch middle-low/high air pressure DTH hammers & bits
Big hole high air pressure DTH hammer using in water well, oil, gas and construction drilling
Eccentric overburden drilling Equipment
Hole opener bit
Rock thread bit (R22, R25, R28, R32, R35, R38, T38, T45, T51, ST58, GT60)
Extension Rod, M/F Rod, M/m Rod, Drift Rod,
Shank adapter, coupling sleeves and all kinds of adapters
Advantages:
Compared with the oversea brands, our advantages are bellowing:
A. Our products can match over 95% against the original products
B. Price are competitive against the famous brands and best quality against the small factory.
Q series Pipe Threading Lath/ good price pipe threading lathe machine. mainly used for processing inner and outer pipe thread, metric thread and inch thread, and can also undertake various turning works such as turning innner and outer cylindrical surface, conical surface and revolution and end surface as general lathes.
1. Product performance standards: API 8A and SY / T5235.
2. Environmental conditions used Sucker Rod Elevator
a) Allows the use at a temperature of -18 â?? ~ 70 â??.
b) Meet the harsh conditions of oil field operations.
3. Sucker Rod Elevator's types: reed.
4. Material requirements: kava body is made of high-quality high-strength steel, handles made of high quality alloy forged steel.
5. Sucker Rod Elevator main technical parameters:
a) Applicable rod outer diameter: 5 / 8in ~ 1 1 / 8in.
b) Maximum load: 15t (135kN), 25t (225kN).
6. Sucker Rod Elevator major quality control requirements:
1) the chemical composition of each batch of material compliance with the relevant standards.
2) Body 10% radiographic flaw detection, high stress area to meet the requirements of grade â?¡ GB / T5677, the remaining parts of the meet GB â?¢ level requirements / T5677's.
3) Mechanical Properties Body of not less than: Rmâ?¥640 PMa, RP0.2â?¥540 PMa, Zâ?¥15%, Aâ?¥25%,AKVâ?¥42J (-20 â??).
4) product 10% for 1.5 times the testimony load test.
5) All parts for magnetic particle testing, high stress area to meet the requirements of grade â?¡ GB / T9444, the remaining parts of the meet GB â?¢ level requirements / T9444's.
6) The main products from raw materials to the carrier using the site dating back the whole process.
7. Sucker Rod Elevator structure diagram and parts list below:
CDQ (S) Sucker Rod Elevator structure diagram.
Slip Type Elevators/Spiders are mechanized tools with air operating. They can handle casings up to 24.1/2inch. They are easy to operate and dependable enough. Also they can reduce workload. They are designed and manufactured according to API Spec 8A/8C.
Type DH Single Arm Elevator Links
1.high quality service
2.Oil Production Tools
3.Competivie price
4.API 8A/8C Spec.
Elevators links are suitable for hanging pipes in the operation of well drilling or repairing. According to the structures, they have two forms: Type DH & Type SH. The weldless links are forged with high quality alloy steel. They are designed and manufactured according to API Spec 8A/8C.
DDZ series elevators are center latch elevator with 18 degree taper shoulder,applied in handing the drilling pipe and drilling tools, ect. The load ranges from 100 tons to 750 tons.The size range from 2-3/8 to 6-5/8.
The products are designed and manufactured according to the requirements in API Spec 8C specification for drilling and production hoisting equipment.
Integral blade stabilizer is an important tool in the drilling engineering to control the well deviation. It can stabilize the drilling tools in the drilling process of oil, gas and geological exploration. It can increase the bit life, drilling speed and well bore quality. There are two kinds of integral stabilizers: spiral integral blade stabilizer and straight integral blade stabilizer
Hardfacing type: HF1000, HF2000, HF3000, HF4000
Washover pipe is a special tool to release the stuck section of drill string in the well bore. TIANHE offers a complete range of washover pipe in the industry. TIANHE unique FJWP thread is a two-step double shoulder thread which assure quick make up and high torsion strength.
Washover pipe accessories:
Drive Sub
Drive Subs provide the crossover connection between fishing string and the washover pipe. Each is machined from high-grade alloy steel and heat treated to provide maximum strength and durability.
Lift Plug
Lift Plug is designed to provide an economical method of handling washover strings. It is available in all thread types and size, has sufficient shoulder diameter to support handling the washover string.
Washover Safety Joint
Washover safety joint is manufactured to provide safe and easy release and make-up whenever disengagement from the washover string becomes necessary. This dependable, field-tough tool is designed to transmit torque in either direction when placed in the washover string.
Rotary Shoes
Rotary Shoe are manufactured from specially heat treated alloy to provide the ultimate in toughness and durability. They are used to cut a clearance between the fish and the wall of the well bore.
Releasing and Circulating Overshot
1) Delivery on time
2) Standard export package
3) API-7-1 Standard
LAKE LT Overshot is one of the fishing tools which is fishing the pipes externally. It can catch drill collar, drill pipe, tubing, subs and other pipes. Because of the seals,the fluid can circulate with the high pump pressure after catching the fish. The top of the fish will be milled by under mill shoe. It can also work with jars to catch the stuck fishes. If the catched fish can't be release from stucking, we should release the overshot and lifting the drill string.
Extension rod, other names are Extension drill steel, Extension drill rod, and Extension steel, M/F rod ( Speed rod ), Produce Hexagonal and round cross sections, Hexagon rods are more rigid, heavier and transfer energy more efficiently, while increasing flushing. Round rods are generally lighter than hexagonal rods and are normally used in extension drilling applications. With the longer steel tending to be larger in diameter, conventional
Drifter rod, another names are tunneling steels, tunneling rod, drifting drill rod, has Round and hexagon rod available, most of drifting drill steel with drill Steel Hexagon is for tunneling and drifting drilling application. Hexagon rods are more rigid, heavier and transfer energy more efficiently, while increasing flushing.
Main Products:
1-12 inch middle-low/high air pressure DTH hammers & bits
Big hole high air pressure DTH hammer using in water well, oil, gas and construction drilling
Eccentric overburden drilling Equipment
Hole opener bit
Rock thread bit (R22, R25, R28, R32, R35, R38, T38, T45, T51, ST58, GT60)
Extension Rod, M/F Rod, M/m Rod, Drift Rod,
Shank adapter, coupling sleeves and all kinds of adapters
Advantages:
Compared with the oversea brands, our advantages are bellowing:
A. Our products can match over 95% against the original products
B. Price are competitive against the famous brands and best quality against the small factory.
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable.
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
APPLY TO BELOW BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Technical parameter
Specification:
1. Standad: API 16 A and ISO 9001
2. Rated Pressure: 2000Psi to 15000Psi(14-17 Mpa)
3. Size: Nominal Bore: 7-1/16" to 21-1/4" (179.4mm to 539.75mm)
4. Type: Shear Ram/ Pipe Ram/ Variable Bore Ram
5. Usage : Single Ram BOP/ Double Ram BOP/ Three Ram BOP
6.Brand:Shenkai and Rongsheng.
7.Imitate: Camaron and Shaffer
8.U type and SH type
Characters of BOP pare parts:
In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks.
Blowout preventer with spherical plastic core and dust-proof ring.
Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use.
Working of BOP pare parts:
When wells must be sealed in case of kicks high pressure (10.5Mpa) oil from control systems enters into close-cavity under piston from housing oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer to each other to moce the rubber between them to the center of wellhead so as to seal drilling tools or fully seal wellhead. In opening , hydraulic pressure oul enters into open-cavity above piston from housing oul inlet, to push piston moving downwards , so that plastic will reset with its own elasticity, wellhead will be open.
Specification:
1).size: 2'', 3'', 4''
2).working pressure:6000-20000psi(42Mpa-140Mpa)
3).working temperature: -29°C~121°C.
4).application enrvironment: standard or H2S
5).Standard: API standard
Introduction:
1. Our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA.
2. Various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 2" to 4" and rated WP ranging from 6000-20000psi(42Mpa-140Mpa).
3. We can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space.
4. Patterns of swivel joint are made in NC machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load.
5. All sizes of swivel joints can be interchanged with FMC equivalent products used in cementing and fracturing equipment.
6. Sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced.
7. Usually good lubrication can ensure that swivel joints work normally without much maintenance.
Application: used as a flexible connection between the cementing pump and maniford and cementing head for conveyance of cement slurries at high pressure.
Inner tube: Moidified NItrile. 3/16" thick, black, specially compound for handling abrasion and corrosion.
Cover:Moidified NItrile. Black, oilproof, Anti-abrasion, weather resistant,synthetic rubber
Working pressure:69 bar
Temperature range: -4~180; (-20 to +82)
Type of Coupling: Swaged-7k hose assemblies with working pressures exceeding 5,000 psi, the end fitting will be butt-welded onto the hose coupling, couplings can be supplied with your hcoice of end fittings.
Fittings: hammer unions, femal sub, male sub/nut. hubs, flanges
Note: field welding of fittings to coupling is not recommended.
Optional: safety clamps
Specification:
1. The chain encloses the pipe so that the chain shaft enters the bayonet and rotates the handle to rotate the pipe.
2. Protect your life and property, please do not overload it.
3. This product is intended for use only as a rotating pipe, no other purpose.
4. Chain pipe wrenches with specifications of 900mm, 1000mm, 1200mm and 1300mm, the jaws can be rotated 180° for installation.
5. Please pay attention to rust prevention.
6. Product standard as GB1200 Chain Pipe Wrench.
ST-80 is a kind of iron roughneck with fully-hydraulic drive,compact structure and solid bottom part. It can realize all functions including fastening, loosening, making up and breaking out the drill pipe.
Main Technical Parameter:
Weight: 2813kg (6200lbs)
Hydraulic requirements: 13.8 MPa (2000psi)
Tubular OD range: 4.1/4-8.1/2 (108~216 mm)
Spin speed: 100 RPM
Spin torque: 2373 N.m (1750ft-lbs)
Max make-up torque: 81500 N.m (6000ft-lbs)
Max break-out torque: 108500 N.m (8000ft-lbs)
Connection height: 812~1727mm(32~68in)
Horizontal travel: 1170mm(46in)
Vertical travel: 889mm (35in)
RSG216-110 iron roughneck is our newly designed product. It is a convenient and modularized product. The tool is used for make-up and break-out operations of drill pipes, drill collars, casings and other type couplings from 31/2â?? to 81/2â??. It is an upgrade product. This product suits for hot or cool environment, onshore or offshore locations.
RSG216-110 iron roughneck can be remote controlled. It is designedand manufactured according to API Spec 7k specifications.
API 6A wellhead equipment and christmas tree
1.advanced manufacturing technology
2.superior well control detection device
We design and manufacture the wellhead and christmas tree in according with API 6A standards totally, also can be supplied to meet the complete material class, temperature range and PSL& PR level requirements. We have lots of type of wellhead for choice,such as conventional spool wellhead, ESP wellhead system, thermal wellhead ,water injection wellhead, time saving wellhead, dual tubing wellhead, integral wellhead,etc.
Rated working pressure: 14-140MPa (2000-20000PSI); rated temperature level: K, L, P, R, A, T, U, V and XY; material grade: AA, BB, CC, DD, EE, FF and HH; specification level: PSL1-PSL4; performance requirement level: PR 1 and PR2.
