Introduction:
Using destructive method to measure coating thickness, containing single and multiple coats, applied on all of substrates, e.g.:aluminum, iron, plastic, wood, concrete, glass etc.
Using Principle:
A cut is made on the test surface with a V-shaped tool.The coating thickness can be measured with the built-in microscope underthe LED light.
Introduction:
BEVS bar applicator is a fully new generation technology against traditional wire bar, ideal for the application of inks and coatings onto flexible materials such as paper, card, textiles, leather, automatic film applicator and etc.
The wet film thickness applied is controlled by the area of the groove between the coils of bar,the minimum thickness can be reach to 6μm.
Feature:
Not peel off
Easy to clean
Apply to 6μm
Technical Specification:
Excellent stainless steel bar : diaÃ?10mm
Total bar lengthï¼?240 or 400mm
Introduction:
Samples can be measured separately at each
angle or at 2 or 3 angles simultaneously and
effectively processed using the powerful built-in
software.
Features:
Automatic calibration integrated in protective holder.
Touch screen with one button measurement
Display reading, statistics and calibration procedure on colorful touch screen
One second to complete automatic calibration
Memory up to 16000 x 3 readings
Multi- languages menu available
Built-in battery with USB port
Transfer data to PC via USB cable, more extended functions
Blue tooth connection
Real-time to view measurement data via mobile phone
Standard:
ISO 2813, AS TM D 523, DIN 67530
Order In formation
1503 Intelligent T r i-Gloss meter ( 20/60/85)
1503/1 Intelligent Gloss meter (20)
1503/2 Intelligent Gloss meter (60)
1503/3 Intelligent Gloss meter (85)
Introduction:
Bevs fineness of grind gauge is manufactured
According to the gb/t1724, iso1524 standard.
Application:
Paint, plastic, pigment, printing ink, paper,
Ceramic, pharmaceutical, food and many other
Industries.
Technical specification:
Material: stainless steel
Dimension(cm)of packing
23.5*19*5
Gross weight(kg)
1.6
Introduction:
Control the actual thickness of dry film or wet film by the precise test of coating.
The coating with excellent consistency and repeatability is required when
doing the coating opacity, wear-resistance, sag-resistance performance and other.
Technical Specification:
High grade stainless steel
C- Sharp design
Film Width: 80 mm
Overall Length: 90 mm
Order Information:
BEVS 1802/ 1: Two Sided Applicator 80 mm film width gap size 25&50um
BEVS 1802/ 2: Two Sided Applicator 80 mm film width gap size 75&100um
BEVS 1802/ 3: Two Sided Applicator 80 mm film width gap size 150&200um
BEVS 1802/4: Two Sided Applicator 80 mm film width gap size 300&400um
Introduction:
This Wet Film Gauge is used to measure the
wet film thickness on smooth & flat coated
surfaces such as lacquer, varnish, adhesive
and other materials. It is made of high grade
stainless steel, easy to clean with related
solvent but hardly be damaged.
Standard:
ASTM- ISO
Used to determine the permeability of films of paints , varnishes, coatings, coating systems and related products, it consists of aluminum cup, seal ring and threaded ring cover.
Introduction:
BEVS supplies the Specific Gravity Cups
which are made of robust aluminum or
stainless steel with 3 different specifications,
50cc/1000cc/83.3cc (US gallon).
Precision:
The manufacturing accuracy of Specific
Gravity Cups is ±0.2% under the room
temperature at 15 ?~25?.
Material:
2101Aluminum/2102Stainless
Introduction:
Control the actual thickness of dry film or wet film by the precise test of coating. Excellent consistency and repeatability coating is required when testing the coating opacity, abrasion sag performance and other quality tests.
Technical Specification:
High grade stainless steel material
H-Sharp design
Available in 2 film widths: 50 or 75 mm
Available in 6 film thickness gap sizes: 50, 75, 100, 125, 150 and 200 μm
Introduction:
BEVS 60°Glossmeter is designed according to ISO-2813, ASTM-D2457, GB9754, GB9966, GB8807 standards.
Features:
Light and portable, adjustable knob type.
Single AA alkaline battery can be used for a long time.
Long lifetime light source, stable performance.
Technical Specification:
Reading range : 0.0�199.9 GU
Indication error: �±1.2 GU
Stability: ±0.4 GU / 30 Mins
Measuring area: 14Ã?30 mm
Dimension: 122Ã?49Ã?94 mm (LÃ?WÃ?Hï¼?
Power supply: 1.5 V
Application:
Furniture, electrical appliances and automotive industry: Printing ink, paint, wooden products, leather products etc.
Decorative industry: Marble, granite, ceramic tile, floor etc.
Printing and packing industry: Plastic and paper.
Other kinds of materials and objects.
Order Information:
BEVS 1501 60°Glossmeter
Introduction:
BEVS Automatic Film Applicators are made with high precision machined components, sturdy mainframe and heavy duty power train assembly, to ensure long term reliable operation. Consistent drawdown conditions such as speed, flatness, combined with applicator gap and geometry are essential elements to obtain perfectly reproducible samples, eliminating human error and uncertainty
Electrically Heated Vacuum Bed
BEVS automatic vacuum applicator is also available with an electrically heated vacuum
bed. The bed temperature can be set from ambient +5°C to + 150°C and temperature is
uniform over the whole bed.
Minimum temperature: Ambient +5ºC
Maximum temperature: +150ºC
Temperature accuracy: 1ºC
Order Information:
BEVS 1811/1 Automatic Film Applicator (with glass bed)
BEVS 1811/2 Automatic Film Applicator (with vacuum bed)
BEVS 1811/3 Automatic Film Applicator (with electrically heated vacuum bed)
Introduction:
Scratch Tester is applied to the scratch resistance performance evaluation of single coating or complex coating system in insulated color coated sheet. It will be known the coating scratch resistance performance by evaluating whether the coating is scratched by tungsten carbide hemispherical stylus with a certain weight or the maximum load of the coating which can not be scratched.
The Scratch Tester of BEVS is complied with the standards of ISO1518, BS3900.
Features:
Big LCD design,touch-screen operation
Adjustable work platform---More convenient
Display the test result on the conductive substrate
High Hardness Scriber---More durable
Special design for sample clamp---Equipped with ruler
Show the testing procedure with real time graph
Technical Specification:
Scratch Speed: 30-40 mm/sec
Moving Distance: 65 mm
Power: 220V/50Hz or 110V/60Hz
Stylus: Tungsten carbide hemispherical stylus, diameter 1mm
Metallic test panel size: 100Ã?150Ã?0.2mm(LÃ?WÃ?H)
Order Information:
BEVS 2801--------Scratch Tester
BEVS 2801/P/001--Tungsten carbide hemispherical stylus, diameter: 1mm
Introduction:
BEVS 2501 series Laboratory Mixer adopts frequency- adapter to adjust speed with the advanced touch-screen control design. Enable to disperse, mix and grind by changing different impellers. Through the touch- screen to set the speed (RPM) and the time of disperse, mix and grind. It's the best choice for R&D,laboratory and spot testing.
Application:
This Laboratory Mixer is applicable to the high- speed stir, dissolution and dispersion of liquid and solidification material in coating, paint, ink, pigments, cosmetic, foodstuff, resin, adhesive, latex, medicine, petroleum and other fields.
Introduction:
BEVS supplies the Specific Gravity Cups which are made of robust aluminum or stainless steel with 3 different specifications, 50cc/1000cc/83.3cc (US gallon).
Precision:
The manufacturing accuracy of Specific Gravity Cups is ±0.2ï¼? under the room temperature at 15â??ï½?25â??.
Standard:
BS3900 A19, ISO 2811, DIN 53217, ASTM 1475
Introduction:
resistance performance evaluation of single
coating or complex coating system in
insulated color coated sheet. It will be known
the coating scratch resistance performance by
evaluating whether the coating is scratched
by tungsten carbide hemispherical stylus
with a certain weight or the maximum load
of the coating which can not be scratched.
Dimension(cm)of packing
60*44*31
Gross Weight(KG)
20
Introduction:
This small, portable instrument is made for measuring
the gloss of curved surface, samll pieces ,specially
shaped surface of small products, application in the
area of coatings, automobiles, toys, furniture, plastics,
banknotes, teeth, ceramics etc.
Order Information :
BEVS 1506 Bench Glossmeter
Introduction:
Adjustable Applicator is applied to evaluate
the slight difference of the film thickness
accurately. It can control the film thickness
by adjusting scraper. And the gap is the final thickness.
Technical Specification:
Stainless steel-Wear resistance
6 film Widths are available:
50/ 100/ 150/ 200/ 250/ 300 mm
Precision: 2 um
Film Thickness Range: 0-3500 um
In 10 um increment
Order Information:
1806/50 50 mm Width
1806/100 100 mm Width
1806/150 150 mm Width
1806/200 200 mm Width
1806/250 250 mm Width
1806/300 300 mm Width
Other width and gap size are available upon request.
Introduction:
The instrument is used for sag resistance evaluation to ensure a uniform film thickness by selecting suitable thickness, which is conducive to verticals , corners, holes, circular pieces of painting controlled. Viscosity, fineness, thickness are major factors in the impact of sagging.
Technical Specification:
High-grade stainless steel
10 different films incremented by 25um
Wet film width 6mm, spacing 1.5mm
Standard:
ASTM D4400,
Introduction:
The instrument is made for evaluating the liquid coating in a horizontal state in order to select an appropriate coating state by controlling the physical properties of the coating.
Technical Specification:
High-grade stainless steel
5 pairs of coating stripes with increased thickness 100-200-300-500-1000um
250-500-1000-2000-4000um
Standard:
ASTM D2801
Technical Specification:
Volume: 108±1 ml
Material: Cup body- aluminum alloy
Nozzle- stainless steel
Flow Time: 30-100 secs
Order Information:
Order No. Orifice(mm) Viscosity Range( cSt)
BEVS 1106/3 3 7~42
BEVS 1106/4 4 35~135
BEVS 1106/5 6 91~325
BEVS 1106/6 8 188~684
BEVS 1106/8 5 600~2000
Introduction:
BEVS1301 Pencil Tester complies with the
requirements of ASTM D3363 and ISO15184
standard, through leaving a superficial trace
on the dry coating film with a certain pencil
hardness, the surface will be variably damaged
by the hardest pencil to evaluate pass/fail or
hardness . Recommend to apply on the smooth
film surface. Use variety of different hardness
pencils,the angle between pencil and the coated
surface is 45°, scratch on the coated surface under
a certain of force, the scratch resistance hardness
of the coating is the pencil hardness which just
scratched the coating.
Introduction:
This machine is used to test the abrasion, scrub and washability performance for many kinds of materials, do the abrasion scrub test in wet and dry condition; touch screen control. It is widely used in water-based coating field.
Application:
Paint, coating, leather, wood, plastic, printing materials and fiber etc.
Big LCD design, touch-screen operation
Operating Menu: Chinese or English
Testing fluid flow is controlled by peristaltic pump
Technical Specification:
Scrub rate: 37±1 cycles/min
Maximum setting of abrasion times: 9999
Sample thickness: 0-25 mm
Test panel thickness range:0-25 mm (Adjustable)
Standards:
ASTM D2486, D3450
DIN 53778
Order Information:
BEVS 2805
Wet Abrasion Scrub Tester
Introduction:
It is designed according to ASTM D1200, D333 and D365 standards and widely used to measure the viscosity of paints,inks, lacquers and other liquids.It is made of high quality aluminum with a stainless steel nozzle insert and the capacity is 100ml.
Evaluate the viscosity of the material by measuring the time of a certain amount specimen in the aluminum cup outflows from the stainless steel nozzle in the bottom.
Technical Specification:
Material: Cup body-aluminum alloy;
Nozzle-stainless steel
Volume: 100 ml
Introduction:
It is designed according to the American Dupont standard and applied to the abrasion resistant test for all kinds of nonconductive coating layers. Judge the abrasion degree of samples by using rubber,artificial sweat, steel wool or alcohol to scrub the surface of the samples.
Features:
Big LCD design, touch-screen operation
Adjustable speed intelligent system, ensure the accuracy of sample measurement
Universal fixture to fix the sample in different shape & size
Technical Specification:
Humanized screen, touch-screen control
Rubbing frequency: No sections and adjustable speed frequency
Adjustalbe rubbing cycle times: 0â??9999
Adjustable stroke length: 20-99 times/min
Adjustable rubbing distance: 10â??50 mm
Test platform: 350Ã?400mm (LÃ?W)
Order Information:
BEVS 2803 Liner Abraser
Introduction:
BEVS 2202 Cross Hatch Cutter is designed and manufactured according to ISO 2409-1992, GB/T9286-98, BS 3900 E6 and ASTM D3359 standards.
Electrically Heated Vacuum Bed
BEVS automatic vacuum applicator is also available with an electrically heated vacuum
bed. The bed temperature can be set from ambient +5°C to + 150°C and temperature is
uniform over the whole bed.
Minimum temperature: Ambient +5ºC
Maximum temperature: +150ºC
Temperature accuracy: 1ºC
Order Information:
BEVS 1811/1 Automatic Film Applicator (with glass bed)
BEVS 1811/2 Automatic Film Applicator (with vacuum bed)
BEVS 1811/3 Automatic Film Applicator (with electrically heated vacuum bed)
Introduction:
The holder is used to simply apply the paint to the glass strip to achieve film combined with cube applicator. It is made by high grade stainless steel to place the glass strip to allow the operator to hold the strip in position, cube applicator is positioned on the glass strip and fill paint into applicator depending on the demand and then applicator is drawn to the end of the glass strip.
Order Information:
BEVS 1815/P/003 Glass Strip Holder
BEVS 1815/P/004 Weight, set of 10, 5 grams per weight
BEVS 1815/P/005 Glass strip
BEVS 1805/1 Cube Applicator
Introduction:
BEVS bar applicator is a fully new generation technology against traditional wire bar, ideal for the application of inks and coatings onto flexible materials such as paper, card, textiles, leather, automatic film applicator and etc.
The wet film thickness applied is controlled by the area of the groove between the coils of bar,the minimum thickness can be reach to 6μm.
Feature:
Easy to clean
Apply to 6μm
Technical Specification:
Excellent stainless steel bar : diaÃ?10mm
Two film width available ï¼?200 or 320 mm
Total bar lengthï¼?240 or 400mm
Introduction:
This BEVS portable intelligent glossmeter has a wide range of applications from matt to high gloss measurements, with advanced touch screen technology and ideal for production and laboratory.
Samples can be measured separately at each angle or at 2 or 3 angles simultaneously and effectively processed using the powerful built-in software.
Introduction:
BEVS Buchholz Indentation Tester can be used to evaluate of indentation resistance of plastic deformable coatings. It is placed onto the specimen surface under a constant test load (500g) provided by a block tester, move the tester after 30 seconds, there is a trace left and then measure via a 20 x magnification illuminated microscope. The coating hardness is indicated by the length of the indentation mark.
Features:
â??Two support pins made of hardened stainless steel
â??Circular tool made of hard metal
â??Built-in bubble level to keep accuracy
â??High precision microscope to obtain correct result
Standard:
BS EN ISO 2815:2003
Order Information:
BEVS 1303 Buchholz Indentation Tester
Standard Delivery: Buchholz tester, precise illuminated microscope,indentation template, AA batteries.
Technical Specification:
High grade stainless steel
Enable to form the parallel film strips with high repeatability
Easily compare with different samples
Two kinds of widths for each applicator
Introduction:
A very robust mechanical unit for determining the elasticity, adhesion and elongation of dry paint on metal sheet.
Perfect design, the instrument can be adapted to the diameter of the mandrel used.
Technical Specification:
Maximum sample width:70mm or 100mm
Sample thickness: 0.3 ~ 1 mm
Mandrels with diameters:
2,3,4,5,6,8,10,12,13,16,19,20,25 and 32mm
Standard:
ASTM D522
Order Information:
BEVS1603 Cylindrical Mandrel Bend Tester, width 70mm
BEVS1603A Cylindrical Mandrel Bend Tester, width 100mm
Other mandrels are available upon request.
Introduction:
BEVS Impact Tester is used to make the reliable evaluation of coatings resistance by simulating actual impact condition.A free falling object impacts coated surface and lead to craze in the substrate,test the destroy degree of crazing.
Most of coating in protective field must be carried out the impact test, such as painting, plating, plastic, varnish, resin, compound, coil coating, sheet and metal material etc.
Instrument including:
Sturdy substrate to connect tube frame
Different falling weight
Clamp ring to adjust the falling weight
Up and down
A graduated tube
Technical Specification:
BEVS 1601/1 Impact Tester
Comply with ASTM D2794
Falling weight: 8.9N (2 Lbs)
Indenter diameter :15.9 mm
Die diameter :16.3 mm
Tuber height: 63.6 cm
BEVS 1601/2 Impact Tester
Comply with ASTM D2794,BS6496
Falling weight: 17.9 N (4 Lbs)
Indenter diameter: 15.9 mm
Die diameter: 16.3 mm
Tuber height: 101.7cm
BEVS 1601/3 Impact Tester
Comply with BS3900, DIN55669, ISO6272
Falling mass:1 kg
Indenter diameter:20 mm
Die diameter:27 mm
Tuber height:100 cm
BEVS 1601/5 Impact Tester
Comply with GB/T 1732
Impact height:1 m
Tube division scale:1 cm
Falling weight:1 kg
Indenter dia:8 mm
Die diameter:15 mm
Impact depth: 2 mm
BEVS 1601/4 Impact Tester
Comply with GB/T 1732
Impact height:50 cm
Tube division scale :1 cm
Falling mass:1 kg
Indenter dia:8 mm
Die diameter:15 mm
Impact depth: 2 mm
Introduction:
The instrument is used for sag resistance evaluation to ensure a uniform film thickness by selecting suitable thickness, which is conducive to verticals, corners, holes, circular pieces of painting controlled. Viscosity,fineness,thickness are major factors in the impact of sagging.
Technical Specification:
â??High-grade stainless steel
â??10 different films incremented by 25 μm
â??Wet film width 6mm, spacing 1.5m
zm
Introduction:
BEVS Buchholz indentation tester can be used
to evaluate of indentation resistance of plastic
deformable coatings.
It is placed onto the specimen surface under a
constant test load (500g) provided by a block
tester, move the tester after 30 seconds, there
is a trace left and then measure via a 20 x
magnification illuminated microscope. The
coating hardness is indicated by the length of
the indentation mark.
Features:
Two support pins made of hardened stainless steel
Circular tool made of hard metal
Built-in bubble level to keep accuracy
High precision microscope to obtain correct result
Standard:
ISO
Order Information:
BEVS 1303 Buchholz Indentation Tester
Standard Delivery: Buchholz tester, precise illuminated
microscope,indentation template, AA batteries.
Introduction:
The cylindrical shape provides excellent
result especially on fire substrate and
smooth surface.
Technical Specification:
High grade stainless steel
Available in 2 film widths: 60 or 80 mm
Available in 4 gaps sizes
Order Information:
1803/ 60/ 1: Four Sided Applicator Width: 60 mm Gap: 30, 60, 90, 120 um
1803/ 60/ 2: Four Sided Applicator Width: 60 mm Gap: 50, 100, 150,2 00 um
1803/80/1: Width: 80 mm Gap: 30, 60, 90, 120 um
1803/80/2: Four Sided Applicator Width: 80 mm Gap: 50, 100, 150,2 00 um
1803/80/3: Four Sided Applicator Width: 80 mm Gap: 100, 200, 300,4 00 um
1803/80/4: Four Sided Applicator Width: 80 mm Gap: 300, 400, 500,6 00 um
Other width and gap size are available upon request.
Introduction:
Through leaving a superficial trace
on the dry coating film with a certain pencil
hardness, the surface will be variably damaged
by the hardest pencil to evaluate pass/fail or
hardness . Recommend to apply on the smooth
film surface. Use variety of different hardness
pencils,the angle between pencil and the coated
surface is 45, scratch on the coated surface under
a certain of force, the scratch resistance hardness
of the coating is the pencil hardness which just
scratched the coating.
Technical Specification:
Pressure of Pencil Tip: 1000/750 /500g
The angle between pencil and film surface is 45
Three points are touched on the tested
surface ( roller, pencil tip)
Scratch Speed: 1 mm/ sec
Hardness Class:
Standard pencil: A set of Mitsubishi pencil (14 pcs from 6B to 6H)
Other brand pencils are available upon request ( Option)
Order Information:
1301/500 Pencil Hardness Tester (500g)
1301/750 Pencil Hardness Tester (750g)
1301/1000 Pencil Hardness Tester (1000g)
Introduction:
BEVS Fineness of Grind Gauge is manufactured according to the GB/T1724, ISO1524 standard.
Application:
Paint, plastic, pigment, printing ink, paper, ceramic, pharmaceutical, food and many other industries.
Technical Specification:
Material: Stainless steel
