TR - Inline Helical Geared Motor have a one-piece (monoblock) housing, which has advantages in terms of rigidity, oil leakage, noise level and gear strength. The high gear quality achieved with modern manufacturing technologies is supplemented with housings made of GG20-22 material. TR - Inline Helical Geared Motor are easy to mount and flexible in usage. Depending on customer requirements direct or IEC B5 or B14 motor connections are available. All models are foot-mounted and have two or three stages in a single housing
PHB - Twin Shaft Bevel Helical Geared Motor consists of helical-geared industrial gear units with bevel stage input. Input and output shafts are perpendicular. PHB - Twin Shaft Bevel Helical Geared Motor is optimized for power density to achieve the highest rating at the smallest possible dimensions. But because high power density also means increased thermal load, the new products are provided as standard with various cooling options. Efficiency is further enhanced through the use of high-grade lubricants and sealings. Another advantage is the wide range of mounting possibilities: The units can be mounted on any side, directly to the motor flange or to the output flange, greatly simplifying their installation. Because these gear units can be mounted on any side, additional equipment, such as integrated or external forced lubrication or oil expansion tanks are available as accessories. We also offers tailored solutions for specific applications. Our standard range includes reinforced bearing arrangement or extended bearing distance for high radial load or agitator applications, backstops for single-direction applications such as conveyors or elevators, brakes for hoisting or moving applications, and shrink disks for alternating loads. Special solutions for extruder applications are provided for each size and ratio.
Gear motors are used in a wide variety of applications, from industrial machinery to automotive systems to robotics. They are commonly used in situations where a high level of torque is required at low speeds, such as in conveyor systems or material handling equipment.
Helical gear motor feature
Drive motor power(p1) y/y2 induction motor, 0.12kw~180kw
Voltage scope(v) 110v~660v or make specially according to clients’requirement.
Phase single(under 3kw) or three
Pole 2 or 4 or 6 or 8 or 10
Motor speed(n1) relys on motor pole:650r/min~3000r/min
Frequency 50hz or 60hz or 50/60hz
Ip ip54 or ip55 or make specially according to clients’ requirement.
Terminal box 0º or 90º or 180º or 270º, any position is allowed
Connect method direct type, if client’s convenient to replace motor, please consider to add extra motor adapter.
Ratio scope(i) 3.2~264, if client want bigger ratio, please consider combination type.
Rated torque(n.M) 72n.M~14800n.M
Output speed(n2) depends on motor pole: n1/ratio(i), n2=0.06r/min~1090r/min
Service factor(fs) 1.2~5.0
Mount type foot and shaft mount
Different type, different size, once confirm type well, we will provide detailed packing information.
