R Helical Gearbox Reducer Motor

Brand : KIC
Ratio : 5:1 to 7:1
Gear Type : Helical
Output Speed(Rpm) : 70
Output Torque(Nm) : 800~100000N.M.
Rated Power(Kw) : 0.06-15kw
Input Speed(Rpm) : 350
Size D,E,F,G,H
Material Cast Iron

Specifications:
Power range: 0.12160kw
Transmission ration range: 1.6521221
Output speed: 0.05809 r/min
Output torque: top to 36000 n.M
Features:
 highly standard modular designed
  quality material ensures product reliability
  wide scope transmission ratio with fine division
  high strength, compact dimension
  long service life
  low noise
  high efficiency
  large radial loading ability
  axial load ability of up to 5% of radial load
Type and models:
Structure form
R seriesfoot mounted units, with two or three stages helical gears.
Rf seriesb5 flange mounted units, with two or three stages helical gears.
Rx seriesfoot mounted units, with single stage helical gears.
Rxf seriesflange mounted units, with single stage helical gears.
Rm seriesflange mounted helical geared motor, with extended bearing housing.
R..Sz..Ad seriesinput shaft type, altered unit connected by input shaft to instead of motor.
R..R seriescombined unit of two different types, to realize very big ratios.
Customizedprofessional technical team offer customized design and item.


Main model
R seriesr17, r27, r37, r47, r57, r67, r77, r87, r97, r107, r137, r147, r167, r177
Rf seriesrf17, rf27, rf37, rf47, rf57, rf67, rf77, rf87, rf97, rf107, rf137, rf147, rf167, rf177
Rx seriesrx57, rx67, rx77, rx87, rx97, rx107, rx137
Rxf seriesrxf57, rxf67, rxf77, rxf87, rxf97, rxf107, rxf137
Rm seriesrm57, rm67, rm77, rm87, rm97, rm107, rm137, rm147, rm167
R..R seriesr27r17, r37r17, r47r37, r57r37, r67r37, r77r37, r87r57, r97r57, r107r77, r137r77, r147r77, r147r87, r167r97, r167r107, r177r97, r177r157
Rf27r17, rf37r17, rf47r37, rf57r37, rf67r37, rf77r37, rf87r57, rf97r57, rf107r77, rf137r77, rf147r77, rf147r87, rf167r97, rf167r107, rf177r97, rf177r157
R..Sz..Ad seriesr..Sz37, r..Sz47, r..Sz57, r..Sz67, r..Sz77, r..Sz87, r..Sz97, r..Sz107, r..Sz137, r..Sz147. R..Sz167, r..Sz177.

TK - Bevel Helical Geared Motor are bevel gearboxes with monoblock housing. They are intended for applications requiring higher efficiency and strength. Their input and output shafts are perpendicular to each otherBevel gearboxes can have a maximum of three stages in a single housing. Larger sizes are available only with three stages in a monoblock housing. A higher number of transmission ratios (up to six) can be implemented through the use of additional housings.

TR - Inline Helical Geared Motor have a one-piece (monoblock) housing, which has advantages in terms of rigidity, oil leakage, noise level and gear strength. The high gear quality achieved with modern manufacturing technologies is supplemented with housings made of GG20-22 material. TR - Inline Helical Geared Motor are easy to mount and flexible in usage. Depending on customer requirements direct or IEC B5 or B14 motor connections are available. All models are foot-mounted and have two or three stages in a single housing

TF - Parallel Shaft Helical Geared Motor This series is compact and easy to mount. Flange-, foot- and hollow shaft-mounted versions, or combinations of these mounting options are available. These gearboxes are of a modular design. Output shaft and flange can be mounted to standard hollow-shaft gearboxes without modification of the gearbox. The housing has mounting points on both sides, allowing mounting from either side. The hollow-shaft gearboxes have new mounting options also for the input side. Input possibilities are standard (IEC B5 or B14), direct coupled or with solid input shaft. A combination with other gearbox types is possible with minimum change. In applications where efficiency and strength are important, hollow-shaft gearboxes are preferred to worm gearboxes. Hollow-shaft gearboxes can withstand higher overhung loads than other gearbox types.

PHB - Twin Shaft Bevel Helical Geared Motor consists of helical-geared industrial gear units with bevel stage input. Input and output shafts are perpendicular. PHB - Twin Shaft Bevel Helical Geared Motor is optimized for power density to achieve the highest rating at the smallest possible dimensions. But because high power density also means increased thermal load, the new products are provided as standard with various cooling options. Efficiency is further enhanced through the use of high-grade lubricants and sealings. Another advantage is the wide range of mounting possibilities: The units can be mounted on any side, directly to the motor flange or to the output flange, greatly simplifying their installation. Because these gear units can be mounted on any side, additional equipment, such as integrated or external forced lubrication or oil expansion tanks are available as accessories. We also offers tailored solutions for specific applications. Our standard range includes reinforced bearing arrangement or extended bearing distance for high radial load or agitator applications, backstops for single-direction applications such as conveyors or elevators, brakes for hoisting or moving applications, and shrink disks for alternating loads. Special solutions for extruder applications are provided for each size and ratio.

Gear reducer

Type : planetary, helical, worm
Orientation : horizontal, vertical
Mounting : foot, flange
Input (rpm or ratio) : 750-1500 rpm
Output torque (nm) : 20-300 rpm
Brand : roadcon
Material : cast iron, steel and bronze
Application : industrial use
Condition : new
Power source : 5 hp to 125 hp
Voltage (v) : 220v

Gear tooth geometry design combines maximum efficiency with high load carrying capacity and minimal noise generation. Serviceability of the product was key in the design of the series h helical gear boxes range allowing easy maintenance for long life and reliability, which are synonymous with our field reputation.