Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance.
Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound.
Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives.
Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery.
Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
After numerous years in the fuel trades, we have been successful in building a solid business relationship with a strong global supplier. Initially, our contracts were limited, but now this restriction has been removed. That said, it appears time for us to initiate a positive working program with the following benefits:
1. Strong supplier with over 24 refineries world-wide.
2. Established track record within the market for EN 590, Jet A-1 and other specialty fuels.
3. Attractive pricing with deep-discounts against Platts.
4. Experienced and reputable administrative team.
We recommend you contact us with your buyer needs defined in detail. For quote consideration, we require listing of the product(s) you wish to consider contracting. We will respond within 72 hours with available specifications, tonnage delivered each month and procedures. Beneficiaries and broker-related contacts will receive commissions immediately upon closing and wired to their individual paymaster accounts. That's it! We try to make the sales and delivery process a pleasure.
EN 590 is a European standard for diesel fuel known as Ultra-Low Sulphur Diesel. It is used in the European Union and other European countries. EN 590 diesel is used in a variety of vehicles, including Cars, Lorries, Vans, Marine craft, and Agricultural vehicles.
For more information contact Boggash Investment Limited
The dealer company is looking for a distributor of an oil refinery to enter into an annual Contract for the purchase of diesel fuel EN 590 10 ppm, of Qatar or Saudi Arabia origin in the amount of 30,000 MT per month. Total quantity: 360 000 MT per year; Terms of delivery: CIF seaport Tallinn (Estonia), Klaipda (Lithuania); Terms of payment: DLC (MT700); Price: 380 $ tons; Product quality: European Union EN 590 standard; Inspection: SGS/ Equivalent; Delivery time: shipment of the first batch within 10 days after issuing the letter of credit. Contact person: Nick
The dealer company is looking for Buyers for diesel fuel EN 590 10 ppm produced in Azerbaijan in volumes from 5,000 to 15,000 metric tons per month on EXW terms, Klaipeda Sea port terminal (Lithuania), according to Incoterms 2020. Total quantity: 5,000 - 180,000 MT per year. The first batch is trial, with a possible extension of the Agreement for 11 months; Payment terms: DLC (MT700), irrevocable, divisible, transferable; Price: $670 - $680 per ton; Product quality: European Union standard EN 590; Inspection: SGS/equivalent; Performance guarantee: 2% of the nominal value of the monthly delivery by the Seller's Bank to the Buyer's Bank; Delivery term: within 20 working days from the date of issue of the letter of credit by the Buyer. Contact person: Nik
The dealer company is looking for Buyers for the conclusion of annual Contracts for the sale of EN 590 10 ppm diesel fuel produced in countries that are not under sanctions, in volumes from 25,000 to 100,000 tons per month, FOB Rotterdam. Delivery of the first batch of goods in the amount of 25,000 - 50,000 MT is trial; Total quantity: 300,000 - 1,200,000 tons per year; Terms of payment: MT103/TT; Price: $ 625 - 630 MT; Product quality: European Union standard EN 590; Inspection: SGS/equivalent; Transaction procedure DIP & PAY: The Buyer issues ICPO together with TSA, and the Seller, in turn, provides the Buyer with PPOP (ATV, TSR, Injection Report and DTA). Contact person: Nick
The dealer company is looking for Buyers to enter into annual Contracts for the sale of EN 590 10 ppm diesel fuel produced in non-sanctioned countries, in volumes from 50,000 to 100,000 tons per month, FOB Fujairah. The delivery of the first batch of goods in the amount of 50,000 - 50,000 MT is trial; Total quantity: 600,000 - 1,200,000 tons per year; Terms of payment: MT103/TT; Price: $ 690 MT; Product quality: European Union standard EN 590; Inspection: SGS/equivalent; Transaction procedure DIP & PAY: The Buyer issues the ICPO and after receiving the CI, provides the BCL, in response, the Seller provides the Buyer with the PPOP (Fresh report of SGS, ATV, TSR, Injection Report and DTA). Contact person: Nick
