Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance.
Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound.
Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives.
Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery.
Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
JET A1 FUEL
Minimum Quantity: 500,000 Barrels per Month
Maximum Quantity: 5,000,000 Barrels per Month
CIF Price: Gross USD $ 102.00BBL NET/ USD $100.00 NET on CIF
FOB Price: Gross USD $ 92.00BBL NET / USD $90.00 NET on FOB/ PORT AKTAU
/Rotterdam
TRANSACTION WORKING PROCEDURE FOB ROTTERDAM
1. Buyer accepts seller working procedure and issue ICPO addressed to the End seller
via Seller's representative.
2. Seller issues commercial invoice (CI) and Buyer signs and returns back commercial
invoice along with Buyer�??s Tank
storage agreement (TSA).
3. Seller provides buyer with the below listed PPOP.
A. Product Passport (product analysis report)
B. Authorization to verify (ATV) via email or call
C. Authorization to verify (ATV) via email or call
Commitment Letter to Supplier
D. Authorization to sell and collect (ATSC)
E. Tank to Tank Injection Agreement (TTIA) to be signed by Buyer's tank farm
4. Seller provides buyer with SGS report, Injection Report, unconditional DTA
5. (NCNDA/IMFPA) will be signed, buyer within 24 hours after successful dip test in seller
tanks provide tank storage receipt (TSR) seller proceed for Tank-to-Tank injection and
provide buyer with the injection report of the product into buyer tanks.
6. Buyer makes payment for total cost of product injected into buyer tanks via MT103,
Seller transfer title ownership to buyer with all exportation documents required of buyer
for the transaction.
7. Upon conclusion of first lift transaction, seller pays all intermediaries involved in the
Transaction and proceeds with the signing of contract with Buyer
8. Buyer pays the buyer side and seller pays the seller side same time Buyer pays Seller
for fuel
WE ALSO HAVE SPOT FOB DIP & PAY PROCEDURE, FOB TANK TO TANK WORKING PROCEDURE, TANK TO VESSEL PROCEDURE FOB, TANK TO VESSEL-ROTTERDAM/HOUSTON/FUJAIRAH/JURONG PORT, CIF, TANK TAKE OVER (TTO) PROCEDURE.
FOB US$84; CIF US$86 for Jet A1, up to, or less than 2,000,000 bbls trial and up to, or less than 8,000,000 bbls pm x 12m under SPA.
2. We offer a range of TTT FOB or TTV FOB procedural options, our preferred ones are the ones that appear below. We can offer alternatives if these do not suit for whatever reason. We offer only one CIF procedure, and it is our most preferred mode of delivery of the range.
3. For interested and genuine Buyers, please email me
We are able to supply multiple kind of petroleum product.
Please read the procedure before you have send any inquiry.
Buyer issues ICPO with banking details, corporate registration certificate and profile, passport copy of authorised representative and proof of fund.
Seller issues draft contract for Buyer to countersign upon acceptance of the terms and conditions which shall be returned immediately.
Buyer triggers Proof of Fund (MT199) to Sellerâ??s fiduciary bank which shall be acknowledged by return SWIFT (MT199).
Within 5 days upon receipt of POF, Seller provides partial proof of product (PPOP) to Buyer for verification;
a) Product Passport (dip test report)
b) Authorisation-to-Sell & Collect (ATSC)
c) Statement of Product Availability
d) Refinery Commitment to Supply Product e) Certificate of Product Origin
Buyer verifies PPOP and issue SBLC (MT700/760/799-Blocked) to Seller nominated bank account within five (05) days as guarantee for the product. In the event of default in the issuance of DLC / BG / SBLC within the grace period, Buyer shall be liable for charges of Storage Tank(s).
Within 5 days upon receipt of payment guarantee, Seller proceed with the Act of Transfer (Change of Ownership Title) from Sellerâ??s name to Buyerâ??s name as legal title-holder of the product with the Ministry of Energy.
Simultaneously, Seller appoints and executes charter party agreement (CPA) with the shipping company and sends full proof of product (POP) and shipping documents to Buyer via Bank-to-Bank;
a) Approval to Export (issued by the Ministry of Justice)
b) Tank Storage Receipt
c) Certificate of Conformity
d) Full set of Bill of Lading (03 original copies)
e) Vessel Notice of Readiness (NOR)
f) Vessel Estimated Time of Arrival (ETA)
g) Marine Insurance Certificate
h) Material Safety Data Sheet (MSDS)
i) Vessel Q88 Document
j) Vessel details
k) Ullage Report
l) Cargo Manifest
m) Corporate Invoice
Upon arrival of cargo and after successful SGS/CIQ at discharge port, Buyer makes payment for product delivery to Sellerâ??s Bank via SWIFT Telegraphic Transfer (MT103) within 72 hours.
Seller pays commission to intermediaries as per MFPA within 50 hours.
