Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance.
Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound.
Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives.
Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery.
Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance.
Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound.
Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives.
Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery.
Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
OFFER ONLY FOR REAL AND DIRECT BUYERS.
UPDATED PRICES
________
FOB ROTERDAM
DIP & PAY
TANK TO TANK
JET A1 (JET FUEL )
Fob Rotterdam.
Origin not sanctioned.
Price 83$/Barrel.
Min 2,000,000/Barrel.
Max 10,000,000/Barrel monthly.
Minimum contract 1 year.
The price has a commission of $2/barrel.
Seller side $1/barrel.
Buyer side $1/barrel.
________
JP54
Fob Rotterdam.
Origin not sanctioned.
Price 83$/Barrel.
Min 2,000,000/Barrel.
Max 10,000,000/barrel monthly.
Minimum contract 1 year.
The price has a commission of $2/barrel.
Seller side $1/barrel.
Buyer side $1/barrel.
________
D6 (VIRGIN FUEL OIL )
Fob Rotterdam.
Origin not sanctioned.
Price 1.01 $/Gal.
Min 200,000,000/Gal.
Max 1,000,000,000/Gal monthly.
Minimum contract 1 year.
The price has a commission of $0.02/Gal.
Seller side $0.01/Gal.
Buyer side $0.01/Gal.
________
EN590 10PPM (ULTRA LOW SULFUR DIESEL )
Fob Rotterdam.
Origin not sanctioned.
Price 530$/MT.
Min 100,000/MT.
Max 500,000/MT monthly.
â?¢ Minimum contract 1 year.
The price has a commission of $10/MT.
Seller side $5$/MT.
Buyer side $5/MT.
________
DIP & PAY PROCEDURES CI SPOT
FOB ROTTERDAM
TANK TO TANK
1. The Buyer sends the ICPO to the Seller along with TSA (Tank Storage Agreement), to be approved by the refinery.
2. The Seller issues the PROFORMA INVOICE directly to the Buyer. Buyer signs and seals and returns to Seller.
3. Seller Issues, CONDITIONAL DTA letter that must be signed by all parties, including Buyer and Tank Farm. Buyer sends TSR (Tank Storage Receipt). After.
4. The Seller issues the POP Document to the Buyer:
a. Unconditional authorization of immersion test
b. SGS Report (No more than 72 hours)
c. ATV (Authorization to Verify)
d. Injection schedule
e. Injection analysis report
f. Supply commitment
5. The Seller issues a COMMERCIAL INVOICE to the Buyer, to be signed and returned to the Seller.
Within 24-48 hours, Buyer makes 100% TT payment via MT103 and after payment is confirmed, starts injection of fuel into Buyer's tanks.
6. Seller issues ATSC (Authorization to Sell and Collect) and changes TITLE to Buyer.
7. Seller issues 12-month contract to be signed by all parties including NCNDA/IMFPA.
NOTE:
If you agree with our price and procedure, you must send the company profile to do DD due diligence.
If everything is in order, the company data is sent so that ICPO can be sent, accepting the price and the seller's procedure.
WE ARE READY TO SUPPLY IN FOB ROTTERDAM/HOUSTON CI DIP PAY
JET A1 - JP54 - VIRGIN FUEL OIL D6 - EN590
- No upfront fees
- Seller will pay Buyer's tank farm lease for 3 days
- Dip test after injecting to Buyer's tank farm
TRANSACTION PROCEDURES FOB CI DIP & PAY
1) Buyer issues ICPO.
2) Seller issues Commercial Invoice (CI). Buyer signs and returns to Seller with his TSA. Seller verifies Buyer's TANK FARM and makes 3 days tank lease payment to the Buyer's tank farm for the Injection Process.
3) Buyer pays his Tank Farm Company for 2 days tank storage costs, (totaling 5 day TSR) after his Tank Farm Company has received the payment from Seller's Company 3 days cost.
4) Seller injects into Buyer's tank and issues ATV and Unconditional DTA.
5) Buyer conducts Dip Test and makes the payment for the total value of product injected into the tanks through the means of MT103-TT.
6) Seller pays all intermediaries involved in the transaction, and subsequently monthly shipment continues as per terms and conditions of the sales and purchase agreement contract between Buyer and Seller.
DIP AND PAY PROCEDURES FOR FOB - Non-Negotiable) - KAZ Origin - Code: HT025
* ICPO - CI
* Seller issues POP : TSR, STAT. OF PRODUCT AVALIBILITY, ATV, DTA.
* Buyer extends Seller's Tank and makes arrangement for Dip Test Schedule.
*Buyer Conducts Dip Test on Seller's Tank at Buyer's expenses & Buyer makes 100% payment for the first trial lift via TT wiring and Seller transfer title ownership of the product to the buyer. Buyer lift product into Vessel or completely take over seller's tanks for further product storage.
* Seller issues final agreement to Buyer to review contract on R&E Monthly Deliveries,
* Buyer reviews and approves contract and issued SBLC/ DLC Irrevocable, Non-Transferable, Auto Revolving for 12 months shipment value, Documentary Letter of Credit for length of Contract and for each lifting as schedule
* Buyer pays after successful Dip Test by MT103 wire transfer on each Monthly delivery.
* The Subsequent delivery shall commence according to the terms and conditions of the Contract and Seller pays
We offer Jet A-1 aviation turbine fuel for commercial airlines and cargo operators. Our product meets international ASTM D1655 and DEF STAN 91-91 specifications, ensuring high thermal stability and performance. Sourced from certified refineries and terminals, available on CIF or FOB basis from major ports including Rotterdam, Houston, and Fujairah. Minimum order: 2,000,000 barrels. Full documentation and SGS inspection provided.
Request pricing, Soft Corporate Offer (SCO), and procedures today.
