True specific gravity 2.533 (20�°C), bulk density 0.90min. Easily soluble in water, Maximum solubility at 35.4�°C. The aqueous solution appears strong alkalinity. On exposure to air it easily absorbs moisture, carbon dioxide, and gradually forms sodium bicarbonate (caking soda).
Usage:
1.The manufacture of glass is one of the most important uses of sodium carbonate. When it is combined with silica (SiO2) and calcium carbonate (CaCO3) and heated to very high temperatures, then cooled very rapidly, glass is produced. This type of glass is known as soda lime glass.
2. Soda ash also is used to clean the air and soften water.
3. Manufacture of Caustic Soda and dyestuffs
4. metallurgy (processing of steel and extraction of iron etc),
5. (flat glass, sanitary pottery)
6. national defense (TNT manufacturing, 60% gelatin-type dynamite ) and some other aspects, such as rock oil refining, paper manufacturing, paint, salt refining, softening of hard water, soap, medicine , food and so on.
Soda ash dense is the grade preferred for glass manufacture because its granular properties make it widely dust-free and reduce the risks of segregation during transport and handling. Sodium carbonate (Na2CO3) is used in the glass and silicate industries and also in metallurgy for its sodium oxide content (Na2O) and for its properties as a flux. It is also widely used as an alkaline reagent for the neutralization of acids and mineral or organic acid salts.
Usage: Mainly used in the glass manufacturing and crystal production industries as a melting aid.
Packing: 50kg bags, 1200kg jumbo bags.
Item Specifications
Sodium Carbonate (Na2Co3) %: Min 99.2
Chloride in terms of (NACL) %: Max 0.4
Iron (Fe+2) %: Max 0.004
Insoluble in water %: Max 0.1
Bulk Density, gr/cm3: 0.85 1.1
Na2o %: Max 58
Particle Size 180UM Sieve Remaining: 70% Min
Soda Ash Dense, also known as Sodium Carbonate (Na2CO3), is a type of soda ash with a higher density than light soda ash.
Characteristics
1. Density: Soda Ash Dense has a density of around 1.0-1.1 g/cm�³.
2. Appearance: It is a white, odorless powder.
3. Purity: Typically has a purity of 99.5% or higher.
Applications
1. Glass manufacturing: Soda Ash Dense is used as a flux to reduce the melting point of silica, making it easier to produce glass.
2. Detergent manufacturing: It is used as a builder in detergent formulations to enhance cleaning power.
3. Paper manufacturing: Soda Ash Dense is used to improve the brightness and strength of paper.
4. Water treatment: It is used to remove impurities and soften water.
Soda Ash Dense has a higher density lowers the temperature at which sand melts when making glass. Glass that uses soda ash is flat glass (windows, automotive, mirrors) and container glass (food and beverage bottles, tumblers and serving dishes). Soda ash is also used in detergents, directly as a water softener in dry mix, and as a raw material for other detergent chemicals. Soda Ash is used for neutralization (lead-acid battery recycling, environmental acid controls) and in aluminum manufacturing. In addition to being a fundamental ingredient in glass manufacturing, soda ash is necessary to petroleum refining, pulp and paper production. Soda ash is one of the ten highest volume minerals produced in North America and constitutes nearly 25% of every pound of glass manufactured. It�?�¢??s used in Ceramics, chemical reagents, soaps, electroplating, metal cleaning, paper coating, enameling, and other general chemical uses.
Sodium Carbonate, Dense
WC Code: 19-011-001
Chemical Characteristics
Sodium Carbonate (as Na2CO3): 99.6% Min
Sodium Oxide (as Na2O): 58.2% Min
Sodium Sulfate (as Na2SO4): 2000PPM Max
Sodium Chloride (as NaCl): 1000PPM Max
Water Insoluble: 500PPM Max
Bulk Density (lbs/ft): 56.0 Min
*Meets FCC standards and is GRAS
Particle Size Distribution
+ 20 mesh (850 micron): 0.4% Max
+ 30 mesh (600 micron): 8.0% Max
+ 100 mesh (150 micron): 85.0% Min
200 mesh (75 micron): 2.0% Max
Packing
Soda Ash Dense has a higher density lowers the temperature at which sand melts when making glass. Glass that uses soda ash is flat glass (windows, automotive, mirrors) and container glass (food and beverage bottles, tumblers and serving dishes). Soda ash is also used in detergents, directly as a water softener in dry mix, and as a raw material for other detergent chemicals. Soda Ash is used for neutralization (lead-acid battery recycling, environmental acid controls) and in aluminum manufacturing. In addition to being a fundamental ingredient in glass manufacturing, soda ash is necessary to petroleum refining, pulp and paper production. Soda ash is one of the ten highest volume minerals produced in North America and constitutes nearly 25% of every pound of glass manufactured. Itâ??s used in Ceramics, chemical reagents, soaps, electroplating, metal cleaning, paper coating, enameling, and other general chemical uses.
Sodium Carbonate, Dense
WC Code: 19-011-001
Chemical Characteristics
Sodium Carbonate (as Na2CO3): 99.6% Min
Sodium Oxide (as Na2O): 58.2% Min
Sodium Sulfate (as Na2SO4): 2000PPM Max
Sodium Chloride (as NaCl): 1000PPM Max
Water Insoluble: 500PPM Max
Bulk Density (lbs/ft): 56.0 Min
*Meets FCC standards and is GRAS
Particle Size Distribution
+ 20 mesh (850 micron): 0.4% Max
+ 30 mesh (600 micron): 8.0% Max
+ 100 mesh (150 micron): 85.0% Min
200 mesh (75 micron): 2.0% Max
Packing
Grade Industrial Grade
Purity % 99.9%
Usage/Application Industrial
Packaging Details 25 Kg Bag
Grade Standard Industrial Grade
Form Powder
Packaging Size 25 Kg
Physical State Powder
Country of Origin Made in India
Dense and Light Sode Ash Chemical Specifications
NO Characteristics Range
1 Alkalinity ( as Na 2C O 3) %
2 Chloride in term of NaCL%
3 Iron ( Fe+2) %
4 Insolubility in water %
Dense and Light Sode Ash Physical Specifications
NO Characteristics Range
1 Bulk Density ( Dense),gr/cm 3 1-1.05
2 Bulk Density ( Light),gr/cm 3 0.6-0.7
Dense Granular
3
Mesh NO. %
200
>70 25-50
70-20 65-85
< 20 20-1
10 0
Dense soda ash, also known as sodium carbonate (Naâ??COâ??), is a highly versatile and inorganic compound used across multiple industries. It is a key ingredient in glass manufacturing, where it lowers the melting point of silica, and is widely employed in the production of detergents, helping to soften water and improve cleaning efficiency. In water treatment, dense soda ash adjusts pH levels and neutralizes acidity. Its high purity and granular form make it suitable for industrial and commercial applications, ensuring efficiency and reliability. Ideal for use in glassmaking, chemical processing, and other heavy-duty applications, dense soda ash is essential for various processes that require strong alkalinity.
Eltee DMCC is the top leading suppliers of Soda Ash Dense in the world. We supply Soda Ash Dense to all the major galss manufacturers of the world. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material.
Properties of Soda Ash Dense :
* Chemical Formula: Na2CO3
* Molecular Weight : 105.99
* Absolute Density, g/cm3@25 degree C : 2.533
* Melting Point , degree centigrade: 851
* Solubility, max % @35.4 degree centigrade: 33.2
* pH of 1% solution @25 degree centigrade: 11.34
Chemical Properties:
* NaCl Weight % : 0.04% Max
* Si02% : 0.03 Max
* Organic Matter as C% : 0.01% Max
Product Usage :
* Glass Industries
* Chemical Intermediates
* Soap and Detergent formulations
* Water Treatment
* Flue Gas Desulfurization
* Pulp and paper
Eltee DMCC is the top leading suppliers of Soda Ash Dense Sachi Brand in the world. We supply Soda Ash Dense Sachi Brand to India, Bangladesh, China, Indonesia , Brazil, Egypt, Georgia, Japan, Jordan, Lithuania, Kenya, Malaysia, Nigeria, South Korea, Spain, United Arabian Emirates, Uganda, Thailand, Tanzania, Vietnam etc .
Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material.
Properties of Soda Ash Dense :
* Chemical Formula: Na2CO3
* Molecular Weight : 105.99
* Absolute Density, g/cm3@25 degree C : 2.533
* Melting Point , degree centigrade: 851
* Solubility, max % @35.4 degree centigrade: 33.2
* pH of 1% solution @25 degree centigrade: 11.34
Chemical Properties:
* NaCl Weight % : 0.04% Max
* Si02% : 0.03 Max
* Organic Matter as C% : 0.01% Max
Product Usage :
* Glass Industries
* Chemical Intermediates
* Soap and Detergent formulations
* Water Treatment
* Flue Gas Desulfurization
* Pulp and paper
