Dense and Light Sode Ash Chemical Specifications
NO Characteristics Range
1 Alkalinity ( as Na 2C O 3) %
2 Chloride in term of NaCL%
3 Iron ( Fe+2) %
4 Insolubility in water %
Dense and Light Sode Ash Physical Specifications
NO Characteristics Range
1 Bulk Density ( Dense),gr/cm 3 1-1.05
2 Bulk Density ( Light),gr/cm 3 0.6-0.7
Dense Granular
3
Mesh NO. %
200
>70 25-50
70-20 65-85
< 20 20-1
10 0
Soda Ash Dense, also known as Sodium Carbonate (Na2CO3), is a type of soda ash with a higher density than light soda ash.
Characteristics
1. Density: Soda Ash Dense has a density of around 1.0-1.1 g/cm�??�?�³.
2. Appearance: It is a white, odorless powder.
3. Purity: Typically has a purity of 99.5% or higher.
Applications
1. Glass manufacturing: Soda Ash Dense is used as a flux to reduce the melting point of silica, making it easier to produce glass.
2. Detergent manufacturing: It is used as a builder in detergent formulations to enhance cleaning power.
3. Paper manufacturing: Soda Ash Dense is used to improve the brightness and strength of paper.
4. Water treatment: It is used to remove impurities and soften water.
Soda ash dense is the grade preferred for glass manufacture because its granular properties make it widely dust-free and reduce the risks of segregation during transport and handling. Sodium carbonate (Na2CO3) is used in the glass and silicate industries and also in metallurgy for its sodium oxide content (Na2O) and for its properties as a flux. It is also widely used as an alkaline reagent for the neutralization of acids and mineral or organic acid salts.
Usage: Mainly used in the glass manufacturing and crystal production industries as a melting aid.
Packing: 50kg bags, 1200kg jumbo bags.
Item Specifications
Sodium Carbonate (Na2Co3) %: Min 99.2
Chloride in terms of (NACL) %: Max 0.4
Iron (Fe+2) %: Max 0.004
Insoluble in water %: Max 0.1
Bulk Density, gr/cm3: 0.85 1.1
Na2o %: Max 58
Particle Size 180UM Sieve Remaining: 70% Min
Properties : white crystal powder, easily soluble in water, water solution is alkali. Easily absorbing moisture and co2 if exposing in the air.
Applications: mainly used in glass-manufacturing, chemical industry, metallurgy, paper, dye, synthetic washes and petrochemistry.
Packing :25kg/ 40kg/50kg/750kg pp woven bag with waterproof pe inner , two layers
Specifications standard : gb210.1-2004
Items : specification
First grade : specification
Second grade
Total alkalinity(as na2co3 in dry base) %99.2% min98.8% min
Chloride content(as nacl) %0.7% max0.9% max
Iron content(as fe in dry base) /%0.003% max0.0035% max
Sulphate content(as so4 in dry base) /%0.03% max0.03% max
Water insoluble matter /%0.03% max0.03% max
Loss on ignition a/ %0.5% max0.5% max
Soda Ash Dense, also known as Sodium Carbonate (Na2CO3), is a type of soda ash with a higher density than light soda ash.
Characteristics
1. Density: Soda Ash Dense has a density of around 1.0-1.1 g/cm�³.
2. Appearance: It is a white, odorless powder.
3. Purity: Typically has a purity of 99.5% or higher.
Applications
1. Glass manufacturing: Soda Ash Dense is used as a flux to reduce the melting point of silica, making it easier to produce glass.
2. Detergent manufacturing: It is used as a builder in detergent formulations to enhance cleaning power.
3. Paper manufacturing: Soda Ash Dense is used to improve the brightness and strength of paper.
4. Water treatment: It is used to remove impurities and soften water.
Soda ash light is very well suited for detergent and chemical applications. Sodium carbonate (Na2CO3) is widely used as an alkaline support and for pH regulation. It is also commonly used as a source of sodium and for water softening applications.
Items Specification
Sodium Carbonate (Na2Co3) %: Min 99.2
Chloride in terms of (NACL) %: Max 0.4
Iron (Fe+2) %: Max 0.002
Insoluble in water %: Max 0.1
Bulk Density, gr/cm3: 0.55- 0.65
Na2o %: Max 58
Particle Size 180UM Sieve Remaining: 70% Min
True specific gravity 2.533 (20�°C), bulk density 0.90min. Easily soluble in water, Maximum solubility at 35.4�°C. The aqueous solution appears strong alkalinity. On exposure to air it easily absorbs moisture, carbon dioxide, and gradually forms sodium bicarbonate (caking soda).
Usage:
1.The manufacture of glass is one of the most important uses of sodium carbonate. When it is combined with silica (SiO2) and calcium carbonate (CaCO3) and heated to very high temperatures, then cooled very rapidly, glass is produced. This type of glass is known as soda lime glass.
2. Soda ash also is used to clean the air and soften water.
3. Manufacture of Caustic Soda and dyestuffs
4. metallurgy (processing of steel and extraction of iron etc),
5. (flat glass, sanitary pottery)
6. national defense (TNT manufacturing, 60% gelatin-type dynamite ) and some other aspects, such as rock oil refining, paper manufacturing, paint, salt refining, softening of hard water, soap, medicine , food and so on.
Eltee DMCC is the top leading suppliers of Soda Ash Dense in the world. We supply Soda Ash Dense to all the major galss manufacturers of the world. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material.
Properties of Soda Ash Dense :
* Chemical Formula: Na2CO3
* Molecular Weight : 105.99
* Absolute Density, g/cm3@25 degree C : 2.533
* Melting Point , degree centigrade: 851
* Solubility, max % @35.4 degree centigrade: 33.2
* pH of 1% solution @25 degree centigrade: 11.34
Chemical Properties:
* NaCl Weight % : 0.04% Max
* Si02% : 0.03 Max
* Organic Matter as C% : 0.01% Max
Product Usage :
* Glass Industries
* Chemical Intermediates
* Soap and Detergent formulations
* Water Treatment
* Flue Gas Desulfurization
* Pulp and paper
Eltee DMCC is the top leading suppliers of Soda Ash Dense Sachi Brand in the world. We supply Soda Ash Dense Sachi Brand to India, Bangladesh, China, Indonesia , Brazil, Egypt, Georgia, Japan, Jordan, Lithuania, Kenya, Malaysia, Nigeria, South Korea, Spain, United Arabian Emirates, Uganda, Thailand, Tanzania, Vietnam etc .
Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material.
Properties of Soda Ash Dense :
* Chemical Formula: Na2CO3
* Molecular Weight : 105.99
* Absolute Density, g/cm3@25 degree C : 2.533
* Melting Point , degree centigrade: 851
* Solubility, max % @35.4 degree centigrade: 33.2
* pH of 1% solution @25 degree centigrade: 11.34
Chemical Properties:
* NaCl Weight % : 0.04% Max
* Si02% : 0.03 Max
* Organic Matter as C% : 0.01% Max
Product Usage :
* Glass Industries
* Chemical Intermediates
* Soap and Detergent formulations
* Water Treatment
* Flue Gas Desulfurization
* Pulp and paper
