ZMD -F Series Fluorine Plastic Self-priming Magnetic Pump
Operating temperature:-20oC ~ 100oC
Flow Capacity :3.6 m3/h ~ 60m3/h
Pump Head :20 m ~ 45m
Power: 1.5-18.5kw
Product Summarize :ZMD-F Series Magnetic pump is application of modern magnetic theory which use of permanent magnets to achieve non-contact indirect transmission of a chemical process pump . When the outer magnets steel rotated by Electric Motor drive , then the inner magnets in rotoring assembly will be synchronous rotating and at sometime due to impeller installed on rotoring assembly, the impeller was rotated which can be pumping solution under magnetic field effect .there have an double isolation sets between inner magnetic rotoring assembly and outer magnets steel .so the liquids was Completely isolated without leakage. Pumping casing designed circulation pump shell. there is always have liquids in the pump chamber after infusion of liquid in first time. It is not need pour liquids into pump shell when running in second time it combined all the excellent with self-priming and without leakage functions . the general self-priming height can reach up to 2 < 4 meters.
Advantage:Without shaft seal and driving through by magnetic coupling, which avoid leakage.
Application Field :
Chemical and petrochemical industries
Acids & lyes
Metal Pickling in automotive manufacturing
Rare-earth separation
Agricultural chemicals
Nonferrous smelting process
WFB series of seal-less self-control self-priming pump adopts no-leakage V-type seal assembly, eliminating the traditional pump packing seal, packing seal, mechanical seal, completely subdued the running, bubbling, dripping, leakingâ??, is to replace the original variety of long-shaft submerged pumps, submersible pumps, submersible pumps, etc. Ideal equipment. Disadvantages of the structure of the pump: First, downtime liquid leakage along the direction of the shaft outward, for frequent starting equipment is not very suitable for the occasion; Second, the power consumed by the secondary impeller is too large, the pump efficiency is low.WFB improved structure for the sealing device, one is to improve the efficiency of the pump, the second is to reduce the power of the motor, the third is to inhibit the leakage of the pump shutdown phenomenon. Sealing device in the movement process without friction, no wear and tear, the service life is more than 10 times longer than similar products. Transplantation of the vacuum pump principle, self-absorption performance is stable and reliable, in particular, the use of â??electric air control valveâ?? truly realised â??a diversion, life-long self-absorptionâ??. High efficiency, low vibration, low noise, flexible movement, easy disassembly, easy to install, no need for foot fixing, eliminating the difficulties of transporting, installing and maintaining the long-shaft submerged pump. With superior self-control function, it can be used with high-tech fields and highly automated series.
Focus-6200 products are kind of non-hardening and self-adhesive waterproof sealing butyl tapes. The materials are weathering resistance and fully accommodate to the surface that it attached to, with effective life up to 20 years.
Main Specification
(Customized size is acceptable.)
2mm thickness * 20mm width * 20mm roll
length 2mm thickness * 30mm width *20mm roll length
Main Color - black, grey, white
Technical Data
Product Series FOCUS-6200 Series
Application Construction Industry
Elongation - 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 25N/cm
Tensile Strength 250KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet
Advantages
* Never hardening, maintain good waterproofing property with weathering resistance performance.
* Excellent performance in waterproofing and sealing.
* Good anti-aging performance effective life up to 20years.
* Easy to apply.
Applications
* Provide waterproof and sealing protection forsteel
structure construction.
* Provide waterproof and sealing protection for door joints, window joints,roofs
and air-ducts. Provide waterproof and sealing protection for sunshine rooms, light plate rooms and thermostatic chamber.
* Provide repair function for leaks on surfaces of metal/plastic/glass/concrete.
Monoblock pumps -
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
- High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP
- Specially designed for wide voltage operation
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life
- Back pull-out design for easy servicing and repair
- Double shielded ball bearings, so no need of external lubrication
- All Model fitted to Mechanical seal.
specification
- Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 32 Mtr.
- Maximum Flow Rate : 940 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Method of Starting : Permanent Split Capacitor (PSC)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40,
50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm)
characteristics of clear cold water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : EN-8
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Plastic
Monoblock Pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- Mechanical seal is provided as per customers requirement
Specification
- Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 65 Mtr.
- Maximum Flow Rate : 1450 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80
100 X 80 and 100 X 100 (All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 mÃ?/sec (max.)
- Ph Value : 6.5 to 8.5
Material of construction - motor
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
5164 Zmd F Series Mgnetic Self Priming Pump Suppliers
Short on time? Let Zmd F Series Mgnetic Self Priming Pump sellers contact you.
Monoblock pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
specification
- Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 12 Mtr.
- Maximum Flow Rate : 3160 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase - Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150
(All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminum
Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries.
The Major Utilization Areas Of Fly Ash :
- Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC).
- Part replacement of OPC in cement concrete.
- High volume Fly Ash concrete.
- Roller Compacted Concrete used for dam & pavement construction.
- Manufacture of ash bricks and other building products.
- Construction of road embankments, structural fills, low lying area development.
- As a soil amender in agriculture and wasteland development.
Types of Fly Ash:
- According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties.
- Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product.
- Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash.
- Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics.
The common name of the preparations: Iodine trioxide
Administration & Dosage of the Preparations: Iodine 3%.
Characterization
Appearance and usage
Reddish brown sticky liquid; its aqueous solution is acidic, foams produce when shaken.
It is easily soluble in water or ethanol.
It can be dissociated into cationic active species with reactive oxygen and active iodine in the aqueous solution, which has cleaning function.
Pharmacological effects
It is the complex compound of four alkyl amine reactive oxygen species and iodine, added the special synergist. It is stable and has no impurity.
Precautions
The preparations wrappers: should be fitted with brand new dark PET/HDPE with plastic inner lid.
The Process of making preparations: when you fill the dilution into the container, the foam will be produced. Therefore, the self-priming filling machine is not appropriate. Please be attention the requirement of the preparation's pH value.
The requirement of water quality: deionized water would be best. Don't make it with the high hardness tap-water and alkaline water.
KN95 New
US$ 0.455 - 2.58 / Piece
10000 Pieces
Minimum Order : 3 - 30 days
Product Details
Model Number : KN95 Protective Mask-#5340
Brand Name : WinHealth (Future)
Origin : China (mainland)
Small Orders : Accepted
Key Specifications/Special Features:
KN95 Particulate Respirator
CE FDA Certificate
Over 95% effectiveness in filtering non-oil particles
Product Introduction
KN95 masks have over 95% effectiveness in filtering non-oil particles. For use primarily for respiratory protection against non-oil particles, such as those from sanding, sawing, grinding, sweeping, bagging, or from processing minerals, coal, iron ore, flour, and certain other substances.
The inner and outer covers of KN95 masks are constructed from spunbond nonwoven fabric.
Polypropylene melt-blown nonwoven is layered between the inner and outer covers. The ear loops are made of polyester elastic which is attached to the mask. The inside nosepiece is a polypropylene or PU foam.
Product Specifications
Product Size Specification and Appearance Requirements
Product Appearance and Materials
Specifications of KN95 Mask
NameParameter
Product name - KN95 Particulate Respirator
Material - Spunbond nonwovens, melt-blown nonwovens, hot air cotton, nose clip, elastic ear loops
Model - Foldable
Size - 110 mm*160 mm /4.33in.*6.30in.
Product application scope and purposeMainly used for respiratory protection against non-oil particles, such as those from sanding, sawing, grinding, sweeping, bagging, or from processing minerals, coal, iron ore, flour, and certain other substances.
Expiration date - 3 years after production
Packaging specification - 2pcs/bag; 50pcs/box; 1000pcs/Carton
Usage instructions1. Hold the ear loops in both hands with the metallic strip up.
2. Put the mask against your face covering both nose and mouth. Place ear loops around both ears.
3. Adjust mask over nose and under chin.
4. Adjust the flexible strip over bridge of nose.
5. Make sure the mask fits properly, covering the nose, mouth and chin.
StorageStore in a cool, dry, clean place away from fire.
Store between -20â?? and 38 (-4 F and 100 F) with relative humidity below 80 %
Standards
KN95 mask complies with the national standard GB2626-2006 CE FDA Certificate Self-Priming, Filter-Type Mask for Respiratory Protection. This standard specifies the technical requirements, testing methods and manufacturing procedures of the mask.
Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry.
Product origin - Varanasi, Uttar Pradesh, India
Key Specifications/Special Features - 1. Copper Winding. 2. Benchmark in head and water discharge at 170 feet. 3. Full Cast Iron Body, Pump Unit and Covers for Sturdiness and Longer life. 4. Fitted with Thermal Overload Protector (T.O.P.). 5.Easy in Handling. 6. Faster Self-Priming
Minimum Order Size and Packaing details - 20 feet container
Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry.
Product origin - Varanasi, Uttar Pradesh, India
Key Specifications/Special Features - 1. Copper Winding. 2. Fitted with Thermal Overload Protector (T.O.P.). 3. Easy in Handling. 4. Faster Self-Priming. 5. Cast Iron Pump Unit and Covers in Aluminium Body for Sturdiness and Longer life. 6. Super Low Voltage Performance (Lifts Water even at 150 Volts).
Minimum Order Size and Packaging details - 20 feet container
Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry.
Product origin - Varanasi, Uttar Pradesh, India
Key Specifications/Special Features - 1. Copper Winding. 2. Huge head and water discharge at 150 feet. 3. Full Cast Iron Body, Pump Unit and Covers for Sturdiness and Longer life. 4. Fitted with Thermal Overload Protector (T.O.P.). 5. Easy in Handling. 6. Faster Self-Priming
Minimum Order Size and Packaging details - 20 feet container
Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry.
Product origin - Varanasi, Uttar Pradesh, India
Key Specifications/Special Features - 1. Copper Winding. 2. Huge discharge 600 L.P.H. at 125 feet. 3. Fitted with Thermal Overload Protector (T.O.P.). 4. Easy in Handling. 5. Faster Self-Priming. 6. Cast Iron Pump Unit and Covers in Aluminium Body for Sturdiness and Longer life. 7. Super Low Voltage Performance (Lifts Water even at 150 Volts).
Minimum Order Size and Packaging details - 20 feet container
Price of product ( USD price or FOB price) -prices will be quoted directly to the clients upon enquiry.
Product origin - Varanasi, Uttar Pradesh, India
Key Specifications/Special Features - 1. Copper Winding. 2. Huge discharge 1000 L.P.H. at 110 feet. 3. Fitted with Thermal Overload Protector (T.O.P.). 4. Easy in Handling. 5. Faster Self-Priming. 6. Cast Iron Pump Unit and Covers in Aluminium Body for Sturdiness and Longer life. 7. Super Low Voltage Performance (Lifts Water even at 150 Volts).
Minimum Order Size and Packaging details - 20 feet container
JET-M SERIES SELF-PRIMING PUMP
JET-M series are suitable for pumping clean water.They are particularly suitable for domestic applications such as supply water from well,pool etc,the automatic distribution of water by surge tanks and pressure switch,gardening,andincreasing of water pressure.
Working conditions
Max Temperature of Fluid up to+40
Max pressure:8bar.
Max Ambient Temperature up to 40
Standard data and equipment:
Single phase 220v/50Hz,Brass or plastic impeller,carbon steel motor shaft, with thermal protector insitde.
Other model and material such as tThree phase,110v,60Hz,dual voltage, stainless shaft,etc,will be available upon request.
Falcon Dlx. 250 mm ( 9 & 10) Borewell Submersible Pumpsets are powered by water filled, rewindable submersibleMotor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressureand rigidly locked in stainless steel stator shell. T-Bolt design in all motor ensures rigid construction.
Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow MRS series 27Mtr head per stage in radial flow series.
- FG 250 Cast Iron Bowl with CED Catted and SS-304 Grade Impeller in Mix flow FMC Series 22Mtr head per stage in
Mix flow series.
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads.
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set.
- Dynamically balanced rotating parts ensures minimum vibration and longer life.
- Designed for wide voltage fluctuations.
- Motor portion covered with corrosive resistance Stainless steel (SS 304) shell.
- More durability and hygiene & High operating efficiency.
- Specially designed thrust bearing to withstand high axial thrust load.
- Extremely hardwearing water lubricated bearing.
- Thread type motor construction ensures service feasibility.
- Designed for wide voltage operation.
- Best alternative for JET & Compressor pump set.
- Additional intermediate bearing in higher stage pumps.
Specification
- Power Range : 55 kW to 112 kW (75 HP to 150HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Speed : 2900 RPM
- Head Range : 12 mtr. To 300 mtr.
- Discharge Range : 3600 LPM to 960 LPM
- Outlet Size in Inch : 4.0" & 5.0"
- Degree of Protection : IP 58
- Maximum Starts Per Hour : 10 Times
Falcon Premium 200 mm (8) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure and rigidly locked in stainless steel stator shell.
Salient Features
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- SS-304 Grade investment casting bowl and SS-304 grade impeller in radial flow series
- 20 Mtr. Head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting pad with carbon plate) to with stand axial thrust
loads
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Special designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures services feasibility
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS Pumps are available
Specification
Direction of Rotation : Counter clockwise from driving end -1ph : Electrically Reversible -3ph
- Power Range : 7.5 kW to 75 kW (10 HP to 100 HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Thrust Load : 7.5 kW -30 kW -10000 lbs
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 440 Mtr.
- Discharge Range : 2400 LPM to 300 LPM
- Outlet Size in Inch : 4.0" & 5.0"
- Degree of Protection : IP 58
- Minimum Cooling Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : Star Delta (SD)
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
V5 Borewell Submersible Pumpset
Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are
assembled under pressure and rigidly locked in stainless steel stators shell.
Salient Features
- SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series)
- 9 Mtr. Head Per Stage In Radial Flow Series.
- Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads.
- Dynamically balanced roating parts ensure minimum vibration and longer life
- Motor Portion covered with corrosion resistant S.S. J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS pumps are available in (GRS - Series)
Specification
- Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply
(Single Phase available in 3 HP to 5 HP)
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 640 Mtr.
- Discharge Range : 690 LPM to 80 LPM
- Outlet Size in Inch : 1.5 , 2.0" & 2.5"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW, 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2
kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star
Delta (SD) upto 9.3 kW
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
5164 Zmd F Series Mgnetic Self Priming Pump Suppliers
Short on time? Let Zmd F Series Mgnetic Self Priming Pump sellers contact you.
