BX1 Technical Specification
Single-phase, on-portable, Top type transformer, step current adjustment fan cooling hight duty cycle, safely and reliable
Nice-looking easy moving suitable for industrial usage
Wooden case package whitout accessories.
BX1-C Technical Specification
Single-phase, on-portable, fan-cooled stick electrod welding machines for mma welding in alternating current (ac) stepless regulation of welding current withthemostatic protection. Use the normal welding rod.
this welder has two kinds, one can only working under the 220v only, the another can not only working under 220v but also under 380v (this is abnormal use)
JSW SERIES SELF-PRIMING PUMP
JSW series are suitable for pumping clean water.They are particularly suitable for domestic applications such as supply water pressure.
Working conditions
Max Temperature of Fluid up to+40íµ.
Max pressure:8bar.
Max Ambient Temperature up to 40íµ.
Standard data and equipment:
Single phase 220v/50Hz,Brass or plastic impeller,carbon steel motor shaft,with thermal protector insitde.
Other model and material such as three phase,110v,60Hz,dual voltage, stainless shaft,etc,will be available upon request.
CPM/CPM-A SERIES CENTRIFUGAL PUMP
CPM/CPM-A series are single stage centrifugal pumps,suitable for both domestic and industrial applications to convey clean liquids and non-aggressive chemical fludids.
The hydraulic characteristic is with higer head and smaller capacity.
Working conditions
Max Temperature of Fluid up to+80íµ.
Max pressure:10bar.
Max Ambient Temperature up to 40íµ.
Standard data and equipment:
Single phase 220v/50Hz,Brass or plastic impeller,carbon steel motor shaft,with thermal protector inside.
Other model and material such as three phase,110v,60Hz,dual voltage, stainless shaft, etc, will be available upon request.
JET-M SERIES SELF-PRIMING PUMP
JET-M series are suitable for pumping clean water.They are particularly suitable for domestic applications such as supply water from well,pool etc,the automatic distribution of water by surge tanks and pressure switch,gardening,andincreasing of water pressure.
Working conditions
Max Temperature of Fluid up to+40
Max pressure:8bar.
Max Ambient Temperature up to 40
Standard data and equipment:
Single phase 220v/50Hz,Brass or plastic impeller,carbon steel motor shaft, with thermal protector insitde.
Other model and material such as tThree phase,110v,60Hz,dual voltage, stainless shaft,etc,will be available upon request.
QDX/QDX-A SERIES SUBMERSIBLE PUMP
QDX/QDX-A submersibe pumps can be used for garden watering,oxygenating of cluster box or in supplying and draining water for ordinary places and characterized by corrosion resistance,small volume,light weight and convenient operation.It is fitted with multiple water-outlet pipes,and self-regulated according to the requirements of its lift and flow,and can deadlock(it is fitted with a floating switch,so it is possible to carry out the automatic control of start-stop action under no one care).
The normal power standard is
220V/50Hz single phase,
220V/380V/50Hz three phase.
Three phase230V/400V/50Hz/60Hz,
singe phase uni-voltage 230V,240V,or
127V,110V,115V.Modes are available on request
LS-P/PD SERIES PLASTIC GARDEN SUBMERSIBLE PUMP
LS-P/PD pumps is a submersible pump,for dirty water or clean water designed mainly for domestic use.
Construction and safety standards in compliance with the en60335-2-4li,en60335-li
Working conditions
Fluid temperature up to 35íµ.
Maxmun ambient temperture 40íµ.
Max particale:30mm(dirty water).
Max particale:5mm(clean water).
Standard data and eqipment:
Single phase 220v/50Hz.
í¦H05/07RN-fí¦Neoperene submersibe supply cable.
Supplied standard with 10 meters of cable and plug.
LS-S/SP SERIES STAINLESS STEEL GARDEN SUBMERSIBLE PUMP
The LS-S/SP is a single open impeller centrifugal submersible drainage pump designed to function either partly or totally submerged.The impeller,mounted on the end of the drive shat,consists of a back disk and blades.The fuid enters the rotating blade channel through the suction,where it moves radially from the center outwards,acquiring energy both in the form of pressure and increased speed.When it leaves the impeller the fluid is conveye~towrds the volute.Here part of the kinetic energy is transformed into pressure energy,and the fluid leaves the pump via the side delivery opening in the pump body.Correct motor cooling is ensured by the fluid being pumped.
WORKING CONDITIONS
Fluid temperature up to 35íµ.
Maximum ambient temperature 40íµ.
Max particale:5mm(Clean water).
Standard data and equipment:
Singe phase220v/50Hz.
í¦H05/07RH-Fí¦Neoperence submersible supply cable.
Supplied standard with 10 Meters of cable and plug.
KF-O/1/2 SERIES PERIPHERIAL PUMP
KF-O0/1/2 series water pumps have peripheral type impeller. On the extremities of the extremities of the impeller there are several radial paddles of the impeller and the pump body.
This characteristic enable the pump obtaining a regular and not pulsating flow and high pressures with quite slopping curves.
Working conditions
Max Temperature of Fluid up to+80
Max pressure:10bar.
Max Ambient Temperature up to 40
Standard data and equipment:
Single phase 220v/50Hz,Brass or plastic impeller,carbon steel motor shaft,with thermal protector inside.
Other model and material such as three phase,110v,60Hz,dual voltage, stainless shaft, etc, will be available upon request.
