Please click here to check who's online and chat with them.

Find Verified Water Based Overprint Varnish Suppliers, Manufacturers and Wholesalers

Oct-09-24

Water-Based Overprint Varnish

$1.65
MOQ: Not Specified
Supplier From Badr, Cairo, Egypt
 
Water-Based Overprint Varnish is an eco-friendly alternative that provides a clear protective coating for printed materials. This varnish offers excellent clarity and adhesion while being safe for food packaging applications.
Technical Specifications:
o Viscosity: 20-25 seconds (DIN 4)
o Drying Method: Air-drying or heat-drying
o Finish Options: Gloss, satin, and matte finishes available
o Substrates: Suitable for coated and uncoated papers
o Coverage: 10-15 m/L
o Shelf Life: 12 months in unopened containers
Mar-24-12
Supplier From Foshan, Guangdong Province, China
Mar-26-12
Supplier From Foshan, Guangdong Province, China
 
Name: Capsule water-based varnish
Model: H-8006
Use: capsule varnish , for plastic and paper package.

Description: H-8006 is using a variety of specialty monomers synthesized varnish which used for plastic. This product has good fluidity, easy to operate, fast drying, and high brightness. Suitable for PET, the adhesion between the film and paper. Applied to paper, plastic bonding with a solid.

Appearance: milky white liquid,
Solid content 40%
Viscosity (seconds): 13 ~ 14, (3 cup, 25 ),
Gloss: 55 5


Notes:
1, It based on conditions of use plus appropriate diluent (water) or alcohol and water (1-5:1) mixture dilution. In order to achieve gloss and abrasion resistance requirements of the situation according to the paper, roll coated with light plus 5 to about 15% thinner, with inline coating liquid, the use of high viscosity coating process should be adjusted to increase the amount of diluent the appropriate viscosity.
2, Varnish on paper should meet the principle, if excessive dilution will affect gloss, abrasion resistance and leveling; the contrary will result in dilution of inadequate leveling varnish is not good, the drying rate is too slow .
3, depending on fuel quality and gloss paper requirements, are generally on-line coating of :2-5 g / m, offline coating 3-7g / m.
4, drying method: to use infrared drying, hot air or heat pipe heating and drying. Drying equipment operation during the first table shows the temperature not lower than 70 .
5, Take 12 hours after polishing of the varnish in order to achieve optimal performance.
6,It can use water to clean equipment, the dry varnish can used Isopropyl alcohol or alcohol to clean.
7, the product of alkali-soluble varnish, when veneer to the cartons (laminating), try to choose a neutral or weakly alkaline (PH 10) adhesives, when used starch caustic soda glue (yellow glue) fluid, Please be strictly controlled to avoid excess glue with a glue penetrate varnished surface caused by dissolution of the coating adhesive.







Package:
25KG/50KG/120KG plastic containers, sealed in a cool place, the shelf life is one year.
Mar-26-12
 
Name: water-based varnish (in-line)
Model: H-5303C
Use :for in-line printing , wet to wet printing , matt ,for paper package .

Description: H-5303C is an environmentally friendly oil dumb fast printing, excellent wear resistance, good leveling characteristics. Fast drying and good printability. Wet ink on good wetting leveling, strong resistance to alcohol, printing machine is easy to clean. Used for frozen packaging, bottled instant noodles, electrical appliances, wine packaging and other high-end printing cigarette packaging. This varnish coating for offset printing blanket, inline coating, glazing, and off-line flexo coating.

Appearance: milky white liquid,
Solid content 40%,
Viscosity (seconds): 18 ~ 20, (Viscosity Cups 3 , 25¡æ)
Gloss: 6 ~10

Notes:
1, It based on conditions of use plus appropriate diluent (water) or alcohol and water (1-5:1) mixture dilution. In order to achieve gloss and abrasion resistance requirements of the situation according to the paper, roll coated with light plus 5 to about 15% thinner, with inline coating liquid, the use of high viscosity coating process should be adjusted to increase the amount of diluent the appropriate viscosity.
2, Varnish on paper should meet the principle, if excessive dilution will affect gloss, abrasion resistance and leveling; the contrary will result in dilution of inadequate leveling varnish is not good, the drying rate is too slow .
3, depending on fuel quality and gloss paper requirements, are generally on-line coating of :2-5 g / m, offline coating 3-7g / m.
4, drying method: to use infrared drying, hot air or heat pipe heating and drying. Drying equipment operation during the first table shows the temperature not lower than 70.
5, Take 12 hours after polishing of the varnish in order to achieve optimal performance.
6,It can use water to clean equipment, the dry varnish can used Isopropyl alcohol or alcohol to clean.
7, the product of alkali-soluble varnish, when veneer to the cartons (laminating), try to choose a neutral or weakly alkaline (PH 10) adhesives, when used starch caustic soda glue (yellow glue) fluid, Please be strictly controlled to avoid excess glue with a glue penetrate varnished surface caused by dissolution of the coating adhesive.






25kg/50kg/120kg plastic containers.
Mar-26-12
 
Name: Water-based Varnish (high viscosity)
Model: H-5312

Use : high gloss ,high viscosity ,for paper package printing
Description: H-5312 is an environmentally friendly water-based varnish, excellent wear resistance, high gloss, gloss retention, dry fast, good printability. A variety of ink has good wetting leveling, printing machine is easy to clean s. It is meet the national and EU environmental standards, through the EU ROHS test, compliance with international environmental requirements. Scratch resistance is strong, mainly used for dusting and more printing, high wear resistance.

Appearance: milky white liquid,
Solid content: 461%,
Viscosity (Viscosity Cups 3 , 25 seconds): 18 ~ 20,
Gloss: 4 ~ 7

Notes:
1, It based on conditions of use plus appropriate diluent (water) or alcohol and water (1-5:1) mixture dilution. In order to achieve gloss and abrasion resistance requirements of the situation according to the paper, roll coated with light plus 5 to about 15% thinner, with inline coating liquid, the use of high viscosity coating process should be adjusted to increase the amount of diluent the appropriate viscosity.
2, Varnish on paper should meet the principle, if excessive dilution will affect gloss, abrasion resistance and leveling; the contrary will result in dilution of inadequate leveling varnish is not good, the drying rate is too slow .
3, depending on fuel quality and gloss paper requirements, are generally on-line coating of :2-5 g / m, offline coating 3-7g / m.
4, drying method: to use infrared drying, hot air or heat pipe heating and drying. Drying equipment operation during the first table shows the temperature not lower than 70 .
5, Take 12 hours after polishing of the varnish in order to achieve optimal performance.
6,It can use water to clean equipment, the dry varnish can used Isopropyl alcohol or alcohol to clean.
7, the product of alkali-soluble varnish, when veneer to the cartons (laminating), try to choose a neutral or weakly alkaline (PH 10) adhesives, when used starch caustic soda glue (yellow glue) fluid, Please be strictly controlled to avoid excess glue with a glue penetrate varnished surface caused by dissolution of the coating adhesive.







Package:
25KG/50KG/120KG plastic containers, sealed in a cool place, the shelf life is one year.
152502 Water Based Overprint Varnish Suppliers
Short on time? Let Water Based Overprint Varnish sellers contact you.
Mar-26-12
 
Name: water-based varnish (self-adhesive)
Model: H-5803C
Use: for in-line printing , wet to wet printing , self-adhesive , for noodles package .

Description: H-5803C is a plus by a special acrylic polymer emulsion with functional additives varnish, It has strong adhesion for the paper after it was hot of the Ultrasonic heating. This varnish has excellent gloss, good gloss and color retention, dry fast, good printability. The wet-wet and wet-dry printing has good wetting leveling, strong anti-alcohol ,printing machine is easy to clean. Dedicated to the noodles package(such as Master), which need ultrasonic to glue Automatic .This varnish is used off-line coating, can also be used for inline coating.

Appearance: milky white liquid,
Solid content 40%,
Viscosity (seconds): 18 ~ 20, (3 cup, 25 ),
Gloss: 55 5

Notes:
1, It based on conditions of use plus appropriate diluent (water) or alcohol and water (1-5:1) mixture dilution. In order to achieve gloss and abrasion resistance requirements of the situation according to the paper, roll coated with light plus 5 to about 15% thinner, with inline coating liquid, the use of high viscosity coating process should be adjusted to increase the amount of diluent the appropriate viscosity.
2, Varnish on paper should meet the principle, if excessive dilution will affect gloss, abrasion resistance and leveling; the contrary will result in dilution of inadequate leveling varnish is not good, the drying rate is too slow .
3, depending on fuel quality and gloss paper requirements, are generally on-line coating of :2-5 g / m, offline coating 3-7g / m.
4, drying method: to use infrared drying, hot air or heat pipe heating and drying. Drying equipment operation during the first table shows the temperature not lower than 70 .
5, Take 12 hours after polishing of the varnish in order to achieve optimal performance.
6,It can use water to clean equipment, the dry varnish can used Isopropyl alcohol or alcohol to clean.
7, the product of alkali-soluble varnish, when veneer to the cartons (laminating), try to choose a neutral or weakly alkaline (PH 10) adhesives, when used starch caustic soda glue (yellow glue) fluid, Please be strictly controlled to avoid excess glue with a glue penetrate varnished surface caused by dissolution of the coating adhesive.





Package:
25KG/50KG/120KG plastic containers, sealed in a cool place, the shelf life is one year.
GOLD Member
VERIFIED
Dec-17-19

Frozen Mineral Water

MOQ: 1  Quarts
Sample Available
Supplier From Gresik, East Java, Indonesia
 
Frozen mineral drinking water 330ml x 24 bottle
Frozen mineral drinking water 600ml x 24 bottle
Frozen mineral drinking water 1500ml x 12
GOLD Member
VERIFIED
Apr-07-25
 
Teak Oil Varnish
GOLD Member
Dec-16-14
Supplier From Skobelevo, Bulgaria
GOLD Member
VERIFIED
Sep-21-18

Frozen Mineral Water

$2
MOQ: 1  Quarts
Sample Available
Supplier From Gresik, East Java, Indonesia
 
Frozen mineral drinking water 330ml x 24 bottle

Frozen mineral drinking water 600ml x 24 bottle

Frozen mineral drinking water 1500ml x 12
GOLD Member
VERIFIED
Nov-20-23

Crystalin Mineral Water.

MOQ: 1  Boxes
Sample Available
Supplier From Semarang, Central Java, Indonesia
 
Crystalin Mineral Water.
Available Pet(24x330ml), Pet(24x600ml), Pet(12x1500ml), Cup(48x220ml). Product is OT Group.
GOLD Member
VERIFIED
Nov-17-23

Ades Mineral Water

MOQ: 1  Boxes
Sample Available
Supplier From Semarang, Central Java, Indonesia
 
Ades Mineral Water
Available Pet(24x600ml), Pet(12x1,5L). Product is Manufactured by PT Coca Cola.
GOLD Member
VERIFIED
Nov-17-23

Prima A Mineral Water

MOQ: 1  Boxes
Sample Available
Supplier From Semarang, Central Java, Indonesia
 
Prima A Mineral Water.
Available packaging : Cup(48x220ml), Pet(24x330ml), Pet(24x600ml), Gallon(1x19L). Product is Manufactured by PT Sinar Sosro.
GOLD Member
VERIFIED
Sep-25-23

Le Mineral Water

MOQ: 1  Boxes
Sample Available
Supplier From Semarang, Central Java, Indonesia
 
Le Mineral Water.
Packaging Bottle (24x330ml/600ml), Bottle (12x1500ml), Bottle (4x5liter), Bottle (1x15liter).
Product is Manufactured by PT Tirta Fresindo Jaya.
GOLD Member
VERIFIED
Sep-15-23

Vit Mineral Water.

MOQ: 1  Boxes
Sample Available
Supplier From Semarang, Central Java, Indonesia
 
Vit Mineral Water.
Available in Packaging : Mini Bottle (24 x 330 ml), Bottle (24 x 550 ml), Bottle (12 x 1500 ml) and Glass (48 x 200ml).
Product is Manufactured by PT Varia Industri Tirta.
GOLD Member
VERIFIED
Sep-15-23

Aqua Mineral Water.

MOQ: 1  Boxes
Sample Available
Supplier From Semarang, Central Java, Indonesia
 
Aqua Mineral Water.
Available in Packaging : Mini Bottle (24 x 220ml / 330ml), Bottle (24 x 600ml), Bottle (12 x 1500ml) and Glass (48 x 220ml).
Product is Manufactured by PT Aqua Golden Mississippi.
GOLD Member
Mar-14-17
Supplier From Boston, MA, United States
SILVER Member
Apr-22-08
Supplier From Kaohsiung, Taiwan
GOLD Member
Nov-24-20
 
Product Description :
"- Conventional coconut water
- Organic coconut water
- Pink coconut water

Product origin :
Thailand

Minimum Order Size and Packaging details :
"- 220 ml
- 520 ml
-1000 ml"
GOLD Member
VERIFIED
Oct-26-23

Cool Time Coconut Water

MOQ: 1  Boxes
Sample Available
Supplier From Semarang, Central Java, Indonesia
 
Cool Time Coconut Water.
Packaging Bottle (12X200ml).
Product of Mayora Indonesia.
152502 Water Based Overprint Varnish Suppliers
Short on time? Let Water Based Overprint Varnish sellers contact you.