Water-Based Overprint Varnish

Name: water-based varnish (in-line)
Model: H-5303C
Use :for in-line printing , wet to wet printing , matt ,for paper package .

Description: H-5303C is an environmentally friendly oil dumb fast printing, excellent wear resistance, good leveling characteristics. Fast drying and good printability. Wet ink on good wetting leveling, strong resistance to alcohol, printing machine is easy to clean. Used for frozen packaging, bottled instant noodles, electrical appliances, wine packaging and other high-end printing cigarette packaging. This varnish coating for offset printing blanket, inline coating, glazing, and off-line flexo coating.

Appearance: milky white liquid,
Solid content 40%,
Viscosity (seconds): 18 ~ 20, (Viscosity Cups 3 , 25¡æ)
Gloss: 6 ~10

Notes:
1, It based on conditions of use plus appropriate diluent (water) or alcohol and water (1-5:1) mixture dilution. In order to achieve gloss and abrasion resistance requirements of the situation according to the paper, roll coated with light plus 5 to about 15% thinner, with inline coating liquid, the use of high viscosity coating process should be adjusted to increase the amount of diluent the appropriate viscosity.
2, Varnish on paper should meet the principle, if excessive dilution will affect gloss, abrasion resistance and leveling; the contrary will result in dilution of inadequate leveling varnish is not good, the drying rate is too slow .
3, depending on fuel quality and gloss paper requirements, are generally on-line coating of :2-5 g / m, offline coating 3-7g / m.
4, drying method: to use infrared drying, hot air or heat pipe heating and drying. Drying equipment operation during the first table shows the temperature not lower than 70.
5, Take 12 hours after polishing of the varnish in order to achieve optimal performance.
6,It can use water to clean equipment, the dry varnish can used Isopropyl alcohol or alcohol to clean.
7, the product of alkali-soluble varnish, when veneer to the cartons (laminating), try to choose a neutral or weakly alkaline (PH 10) adhesives, when used starch caustic soda glue (yellow glue) fluid, Please be strictly controlled to avoid excess glue with a glue penetrate varnished surface caused by dissolution of the coating adhesive.






25kg/50kg/120kg plastic containers.

Name: Water-based Varnish (high viscosity)
Model: H-5312

Use : high gloss ,high viscosity ,for paper package printing
Description: H-5312 is an environmentally friendly water-based varnish, excellent wear resistance, high gloss, gloss retention, dry fast, good printability. A variety of ink has good wetting leveling, printing machine is easy to clean s. It is meet the national and EU environmental standards, through the EU ROHS test, compliance with international environmental requirements. Scratch resistance is strong, mainly used for dusting and more printing, high wear resistance.

Appearance: milky white liquid,
Solid content: 461%,
Viscosity (Viscosity Cups 3 , 25 seconds): 18 ~ 20,
Gloss: 4 ~ 7

Notes:
1, It based on conditions of use plus appropriate diluent (water) or alcohol and water (1-5:1) mixture dilution. In order to achieve gloss and abrasion resistance requirements of the situation according to the paper, roll coated with light plus 5 to about 15% thinner, with inline coating liquid, the use of high viscosity coating process should be adjusted to increase the amount of diluent the appropriate viscosity.
2, Varnish on paper should meet the principle, if excessive dilution will affect gloss, abrasion resistance and leveling; the contrary will result in dilution of inadequate leveling varnish is not good, the drying rate is too slow .
3, depending on fuel quality and gloss paper requirements, are generally on-line coating of :2-5 g / m, offline coating 3-7g / m.
4, drying method: to use infrared drying, hot air or heat pipe heating and drying. Drying equipment operation during the first table shows the temperature not lower than 70 .
5, Take 12 hours after polishing of the varnish in order to achieve optimal performance.
6,It can use water to clean equipment, the dry varnish can used Isopropyl alcohol or alcohol to clean.
7, the product of alkali-soluble varnish, when veneer to the cartons (laminating), try to choose a neutral or weakly alkaline (PH 10) adhesives, when used starch caustic soda glue (yellow glue) fluid, Please be strictly controlled to avoid excess glue with a glue penetrate varnished surface caused by dissolution of the coating adhesive.







Package:
25KG/50KG/120KG plastic containers, sealed in a cool place, the shelf life is one year.

Name: water-based varnish (self-adhesive)
Model: H-5803C
Use: for in-line printing , wet to wet printing , self-adhesive , for noodles package .

Description: H-5803C is a plus by a special acrylic polymer emulsion with functional additives varnish, It has strong adhesion for the paper after it was hot of the Ultrasonic heating. This varnish has excellent gloss, good gloss and color retention, dry fast, good printability. The wet-wet and wet-dry printing has good wetting leveling, strong anti-alcohol ,printing machine is easy to clean. Dedicated to the noodles package(such as Master), which need ultrasonic to glue Automatic .This varnish is used off-line coating, can also be used for inline coating.

Appearance: milky white liquid,
Solid content 40%,
Viscosity (seconds): 18 ~ 20, (3 cup, 25 ),
Gloss: 55 5

Notes:
1, It based on conditions of use plus appropriate diluent (water) or alcohol and water (1-5:1) mixture dilution. In order to achieve gloss and abrasion resistance requirements of the situation according to the paper, roll coated with light plus 5 to about 15% thinner, with inline coating liquid, the use of high viscosity coating process should be adjusted to increase the amount of diluent the appropriate viscosity.
2, Varnish on paper should meet the principle, if excessive dilution will affect gloss, abrasion resistance and leveling; the contrary will result in dilution of inadequate leveling varnish is not good, the drying rate is too slow .
3, depending on fuel quality and gloss paper requirements, are generally on-line coating of :2-5 g / m, offline coating 3-7g / m.
4, drying method: to use infrared drying, hot air or heat pipe heating and drying. Drying equipment operation during the first table shows the temperature not lower than 70 .
5, Take 12 hours after polishing of the varnish in order to achieve optimal performance.
6,It can use water to clean equipment, the dry varnish can used Isopropyl alcohol or alcohol to clean.
7, the product of alkali-soluble varnish, when veneer to the cartons (laminating), try to choose a neutral or weakly alkaline (PH 10) adhesives, when used starch caustic soda glue (yellow glue) fluid, Please be strictly controlled to avoid excess glue with a glue penetrate varnished surface caused by dissolution of the coating adhesive.





Package:
25KG/50KG/120KG plastic containers, sealed in a cool place, the shelf life is one year.

Water Based Coatings
- Primers, Gloss & High Scuff
- High Gloss/High Slip
- Duct Gloss & Matt
- Specialty Coatings
- Soft Feel / Satin / Neutral / Super Matt

EXPORT QUALITY PRODUCT Ritver Kitchen Emulsion is a water-based paint, it appears in matt finish and are excellent paints for the ceiling and kitchen and bathrooms. Excellent coverage dependent on the quality of substrate (9 to 11 sqmtrs per liters) at 30 micron thickness Paint System: Apply Primer Apply Wall Putty Apply Diamond Emulsion (choose from our color list)

Super Heat Duty and High Alumina Fire Bricks arethe products made fromdifferent fractions of refractory grog, fire clays and calcinedbauxiteof high purity.Thedifferent fractionsof theserawmaterials aremixedin counter current mixers and plugged for obtaining homogeneous mixture. The mixtureobtained hence,is then pressed in high capacity presses to give the desired shape and size.These pressed shapes are fired in high temperature tunnel kiln at

1300 C and above. These bricks are manufactured as per IS: 6 and IS: 8

SPECIFICATION

Shape RECTANGULAR // CUSTOMISED
Brick/Block Color BROWN
For Use in Side Walls, Partition Walls, Roof, Floor
Brand GLM
Material CLAY AND ALUMINA / BAUXITE
Size 9 In. X 4 In. X 3 In.

High alumina brick for blast furnace;
Burned micro hole carbon-high alumina brick for blast furnace;
Normal high alumina brick for hot blast stove;
Low creep high alumina brick for hot blast stove;
High alumina brick for electric arc furnace roofs;
High alumina brick for steel ladle.


1. High Purity;

2. Small Impurities;

3. Low Thermal Capacity;

4. Low Thermal Conductivity;

5. High Strength;

6. Good Thermal Resistance;

7. Strong Anti-Corrosion.

Each kind of castable refractory material serves a different purpose. Here are some examples as to how people would use them for different applications.





Conventional Dense Refractories. These have a high concentration of alumina cement in their composition. Conventional dense refractory materials can handle temperatures that go as high as 1800 Fahrenheit. Applications such as boiler work require these kinds of materials.


Insulating Materials. Another kind of castable refractory is the insulating kind. They are lower density compared to the other types of castable refractory materials. They have low thermal conductivity as well. They are a good choice if you want something that will resist abrasion.


There is such a wide range of refractory materials that you can choose from for their applications. Castable refractory materials also vary, so we advise calling in for a consultation. Our knowledgeable staff will be happy to help out.