Copper Mould Tube & Plate
We specially in supplying Copper Mould Tube, Crystallizing equipment of continuous casters, Mould cooling jacket, Repair of Metallurgical Copper Mould Tube, etc.
Equipments & Spare parts for Continuous Casting Machine.
1. Copper mould tube( square, rectangle and round )
2. Crystallizing equipment of continuous casters
3. Mould cooling jacket.
4. repair of copper tube moulds
COPPER MOULD ALLOYS
The copper alloys chosen for the moulds must maintain their physical properties at the operating temperatures of the continuous casting process.
The temperature gradation from the inner wall of the mould to the outside face of the mould can cause serious distortion problems, and Metallurgical Copper Mould Tube is imperative that the correct alloy is chosen for the various operating conditions.
Square Copper mould tube STANDARD MATERIALS
Phosphorus de-oxidised copper
This alloy has been proven to be excellent for the manufacture of moulds in the continuous casting of billets. The main composition of this alloy are Cu +Ag 99.90min, P0.0015 / 0.040.
Copper -Silver alloy
The addition of a small amount of silver, whilst not increasing the melting point of copper, does increase the recrystallisation temperature by almost 100â??, and also helps to give better thermal conductivity at the operating temperatures.
This alloy is normally used in moulds for the continuous casting of blooms and slabs .In this case, the moulds are much thicker than in the billet moulds, and the moulds temperature can be higher. The main composition of this alloy are Cu+Ag99.90 min. Ag 0.08 / 0.12 O 0.004 / 0.012.
We have contracted to custom make various of tube plate for heat exchangers, pressure vessels used in nuclear power industry, petro-chemical industry, water-treatment industry.
The tube plates we have produced feature in:
Large diameter up to od 8600mm
High precision
Deep boring possible
Complex hole shape possible
Multi machining processes possible
Metal material can be carbon steel, stainless steel, and special alloy including titanium.
The company also produces burner, roller, beam, radiant tube, rapid cooling tube, thermocouple protecting tube, crucilble, chemical pipes and other special-shaped products. The products are widely used in consturction ceramics, domestic ceramics, industrial kilns, environmental protection of the power plant, paper manufacture, machinery and many other fields. The radiant tubes are widely used in the forging steel company. These products fill the domestic emptiness in many fileds .
Star Good Steel Co., Ltd. is the Stainless Steel I-Beam Factory, Stainless Steel Ingot Factory, Mainly Consists Of Section Steel, Building Material, Stainless Steel Tube, Steel Coil, Cold Rolled Steel Plate, Hot Rolled Steel Plate And Galvanized Steel. Standard ASTM, JIS, DIN, EN, GB, etc. Package Standard export package, or as required.
Thickness: 1.5-200mm, Width: 200-2500mm, Length: 1000-12000mm, or as required. welcome enquiry of choose and buy!
Design with double taper, triple taper
Multi-taper, parabolic taper and various kinds of continuous taper
Non-standard mould
Beam blank mould
The materials of copper mould tubes should be the ones with good tensile strength, fatigue strength, proper hardness, low elongation and high heat conductivity coefficient. As a result, material like phosphorous deoxidize copper CU-DHP, CUAG0.1P, CR-ZR-CU are widely accepted by users of all countries.
Coatings:
Copper has lower hardness which leads to lower anti-abrasive property. Therefore, the area at the lower part of the moulds, where the stress increases drastically due to shells, will be more severely worn. To increase the life time of copper moulds, Uniform mould interior surface plating with suitable hardness is needed. We use hard chrome plating to increase the life of mould tubes. The plating thickness will be controlled in the best range. As for the coating of copper mould plates, based on our years of experience, we are able to provide Cr coating, Ni-Cr coating, Ni-Fe coating and Ni-Co-Cr coating to meet the demand of various customers both at home and abroad.
Hollow Section steel Tube is the general name for the steel pipe other than thecircular steel pipe. Such as square, rectangle, oval,elliptical, cone, trapezoidal, spiral, etc. Different steel pipe can more adapt to the particularity of use conditions, save metal and improve the labor productivity of parts manufacturing. It is widely used in aviation, automobile, shipbuilding, mining machinery, agricultural machinery, construction, light textile and boiler manufacturing. The methods of producing different pipes are cold pulling, electric welding, extrusion and hot rolling, etc. Compared with the round tube, the different tubes generally have a larger moment of inertia and cross section modulus, and have a large bending resistance and torsion resistance, which can greatly reduce the structural weight and save steel.
We deals in the following products of India, China, Taiwan and Korea Origin:-
Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc)
Product name: Wheat bran plates
Material: Wheat bran
Usage: Decor home, restaurant, gift,
Price: contact us for the best price
Color: as the picture or Customized
Technique: Painted
Delivery time: 5-10 days according to customer's exact order
Trade Terms: FOB HCM Port : Vietnam
Payment Terms: T/T 30% deposit, balance against TT or L/C at sight, irrevocable
Size: 5-35cmâ?¨
Shape: Heart, Square, Animal, Fruits,
Round, Rectangle, Oval, etc
Material : wooden, eco-friendly, durable, lightweight (Food safety grade)
Delivery Time : 35-40 days after receiving deposit or L/C or based on customer's exact order
Payment : T/T with 50% deposit and 50% against copy of original documents or L/C at sight
Trade Term : FOB, Jakarta
Size: 5-35cm
Shape: Heart, Square, Animal, Fruits,
Round, Rectangle, Oval, etc
Material : wooden, eco-friendly, durable, lightweight (Food safety grade)
Delivery Time : 35-40 days after receiving deposit or L/C or based on customer's exact order
Payment : T/T with 50% deposit and 50% against copy of original documents or L/C at sight
Trade Term : FOB, Jakarta
107932 Tube Plates Suppliers
Short on time? Let Tube Plates sellers contact you.
