Physiologically harmless, suitable for food products
Smooth surface to achieve good flowability and to avoid plugs
No spilled material to clean up
2: ceramic tube pipe introduction :
Chemshun alumina ceramic lined composite steel pipe not only has steel pipe characters of
High-strength, good toughness, impact resistance, good weld-ability, but also has corundum
Ceramics characters of high hardness, high wear resistance, corrosion resistance, heat
Resistance. Which overcome disadvantages of steel low hardness, poor wear resistance
And ceramics poor toughness, therefore, ceramic lined pipes have comprehensive property
Of excellent wear resistance , hear resistance , corrosion resistance , mechanical shock and
Thermal shock etc , it is the ideal pipeline of conveying sand , stone , coal , ash, molten
Aluminum etc particles and corrosive medium, chemshun ceramics offers sophisticated
Design and engineering capabilities of both standard and custom wear linings, installation
And project management, as well as abra sion a udits of used wear linings.
3:technical data :
1) chemical data :
Al2o3 sio2 cao mgo na2o
92~93% 3~6% 1~1.6% 0.2~0.8% 0.1%
2) physical data :
Specific gravity (g/cc) >3.60
Apparent porosity (%) 0
Flexural strength (20 c, mpa) 280
Compressive strength (20 c, mpa) 850
Rockwell hardness (hra) 80
Vickers hardness (hv) 1050
Moh's hardness (scale) =9
Thermal expansion (20-800 c, x10-6/ c) 8
Crystal size (m) 1.3-3.0
The durability of Abrasion Resistant Ceramic Lined Pipe and Elbow directly affects the safe running of fluid transmit system!
We successfully combined the ceramic with the steel matrix directly, and firstly developed mass production.
This technique created a brand-new ceramic-metal bonding way to overcome the problem that the ceramic is lack of impact resistance and thermal stability, and easy to pull off.
After times of trials, we insist on choosing 95% Alumina Ceramics with high quality to ensure your best experience.
Our new Abrasion Resistant Ceramic Lined Pipe and Elbow have been in service for metallurgy, cement, mining, chemical, thermal power plants for years. Compared to seamless steel pipes and elbow, the uptimes of our tubes used to be prolonged by 10 times.
It is the ideal product instead of steel or rubber lined pipe and elbow.
Advantages:
1. Good abrasion resistance
The liner is High quality wear ceramic with 95% Al2O3 which are sintered under 1700 and the hardness are up to 85HRA which is 271.5 times of manganese steel or 1700 times of chrome steel plate. Special composite method and toughening formula ensure the ceramic not being too fragile to resist the impact of normal blocks.
2. Little loss during running
3. Low project cost
Light weight and longer lifetime to save the cost of support structure and handling charges. The charges is similar to basalt piping project, or 20-30% less than wear steel piping project.
The durability of Abrasion Resistant Ceramic Lined Pipe and Elbow directly affects the safe running of fluid transmit system!
We successfully combined the ceramic with the steel matrix directly, and firstly developed mass production.
This technique created a brand-new ceramic-metal bonding way to overcome the problem that the ceramic is lack of impact resistance and thermal stability, and easy to pull off.
After times of trials, we insist on choosing 95% Alumina Ceramics with high quality to ensure your best experience.
Our new Abrasion Resistant Ceramic Lined Pipe and Elbow have been in service for metallurgy, cement, mining, chemical, thermal power plants for years. Compared to seamless steel pipes and elbow, the uptimes of our tubes used to be prolonged by 10 times.
It is the ideal product instead of steel or rubber lined pipe and elbow.
Advantages:
1. Good abrasion resistance
The liner is High quality wear ceramic with 95% Al2O3 which are sintered under 1700 and the hardness are up to 85HRA which is 271.5 times of manganese steel or 1700 times of chrome steel plate. Special composite method and toughening formula ensure the ceramic not being too fragile to resist the impact of normal blocks.
2. Little loss during running
3. Low project cost
Light weight and longer lifetime to save the cost of support structure and handling charges. The charges is similar to basalt piping project, or 20-30% less than wear steel piping project.
Ceramic Lined Composite Pipe and Ceramic Elbow
FREE-Valves Ceramic Lined Composite Pipe and Ceramic Elbow include elbow, short section ,Tee joint ,reducer etc ,which are widely used in the powder of pneumatic conveying and pumping conveying . Due to the large abrasives , high hardness ,high speed ,large flow rate of medium ,the ceramic ring lined composite pipes can greatly prolong the speed of pipes wear out .
Features
Ceramic lined steel pipe has strong wear resistance performance and ant-erosion capacity.
With Smooth inner wall, will not blocked by the powder medium .
Good anti-abrasive performance ,longer working life time
Technical Specification ndsASME B16.5GB/T9113
Nominal Pressure1.0MPa,Cla ss150
Size RangDN50DN 300, N PS2 NPS12
Connection type Flange/ Weldi
ng
Working Temperature200
Pipe materialEngineering ceramic+ Steel
Application:
Slag draining, ash removal, powder feeding and back powder systems in power plants.
Iron alloy conveying of steel-making, slag conveying pipeline, external refining and so on in steel plant.
LiCoO2 powder raw slurry conveying in cement plant, coal powder conveying, concrete conveying pipe.
Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.
According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.
According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
Product Grade: As per Client Requirement (MS/SS, etc)
Minimum and Maximum Price: As per Request
Price Units: USD
Incoterms: As per Mutual Understanding with Buyer
Product Origin: India
HS Code: Provided as per product
Minimum Order Size: NO MOQ (We can cater small quantities also)
Packaging Details: For Export Material (Export Quality Wooden Box)
Origin:Unites States
Code: 2025820BN
Material: HDPE pipe PE4710 shredded Black
Category: HDPE
Type: pipe PE4710 shredded
Color: Black
Quantity:36 Tons
Loading weight: 18 Tons
Specification:"HDPE pipe PE4710 shredded black
MFI: 0.3
Unwashed. But clean. No dust, no oil.
Sizes are 0.5 inch to 1.5 inch
PE4710 and PE100 are both grades of high-density polyethylene (HDPE), but PE4710 is derived from PE100 and offers higher performance, particularlyin pressure applications. PE100 has similar or lower physical property requirements than PE4710, while PE4710 has stricter design factors andadditional performance requirements.
Key Differences:
Performance Requirements: PE4710 has higher performance requirementsincluding better resistance to slow crack growth (SCG) and rapid crackpropagation (RCP) compared to PE100.
Packing: Jumbo bags
Subject to unsold"
Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?
1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?
Origin: United States
Code: 2025882BN
Material: HDPE PE100 pipe cutting Black
Category: HDPE
Type: PE100 pipe cutting
Color: Black
Quantity: 16 Tons
Loading weight: 80 Tons
Specification: "HDPE PE100 pipe cutting, PIR
Loading weight 16~20tons/load
Monthly 20loads
Packing bulk into containers
On going shpts"
Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?
1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?
Origin: United States
Code: 2025820BN
Material: HDPE pipe PE100 shredded Black
Category: HDPE
Type: pipe PE100 shredded
Color: Black
Quantity: 36 Tons
Loading weight: 18 Tons
Specification:"HDPE pipe PE100 shredded black
MFI: 0.3
Unwashed. But clean. No dust, no oil.
Sizes are 0.5 inch to 1.5 inch
Packing: Jumbo bags
Subject to unsold"
Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?
1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?
GOOD GRADE OCC WASTE PAPER SCRAP MADE IN USA GRADE 11 AND 12
Place of Origin : JAPAN, US, EUROPE
Materials : Waste Paper
Type : OCC, ONP, OMG, YELLOW PAGES, A3, A4 WASTE PAPER
Color : Mixed & NOT MIXED
Unit : Ton/Tons
Minimum Order : 20 Tons
Payment Term : T/T 50/50 and L/C 100% at sight
Shipping Lines : Ocean shipping
Estimate Lead Time : 15 - 20 days
Shipping Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach
Supplying Capacity : 200 tons/month
Packaging : Bale (1.2-1.4 Tons/Bale), 20-25 Tons loading 40FT container
Type - Other Watering & Irrigation
Model Number - IR161020-2
Material - Plastic
Diameter - 16 MM
Wall thickness - 1,0 MM
Flow rate - 2 lph
Packaging - 400 meter
Dripper spacing - 20 CM
We are supplier and exporter of All types of ceramic Tiles.
We have been exporting Ceramic Tiles to more than 15 countries. We deal in most of the Sizes and Variety of Tiles ie :- 1. 300X450 MM Wall tiles 2. 300X600 MM Wall tiles / Vitrified Tiles 3. 200X600 MM Wall tiles 4. 300X300 MM Wall tiles 5. 250X375 MM Wall Tiles 6 600X600 MM Vitrified Tiles / Double Charge / Full body tiles / Porcelain tiles 7 600X1200 MM Vitrified Tiles /Full body tiles 8 Slab Tiles 9 Subway Tiles 10 Quartz Stone 11 Engineered stone
Metal Aids India a accredited with AN ISO 9001: 2015, 14001: 2015, OHSAS 18001 & PED Certified Company and was established in since 2010. We take the pleasure to introduce ourselves as a largest Manufacture & Exporter of all type of industries products like Seamless & Welded Elbow, Tee, Reducer, Clamp, Cap in different
shape & size (as per client drawing & specification) etc.
Product Specification: UNS 32750 Duplex Elbow
Specification: ASTM / ASME
Size: 1/2\" To 48\"NB & OD (Welded Thk: 1MM to 40MM)
Seamless Thk: Sch10, Sch 30, Sch 40, Sch 60, Sch 80, Sch 160
Type: Elbow (Short & Long Elbow),90 Deg Elbow, 45 Deg Elbow.
Form: Seamless & ERW (Welded)
Grade:
Duplex & Super Duplex: UNS 31803, UNS32205 (F51), UNS 32750
(F 53), UNS 32760 (F 55), UNS 31254 (SMO. 254)
Product Details:
Size 3 inch, 2 inch, 1/4 inch, 1 inch, 3/4 inch, >3inch
Connection Flange, Male, Female, Welded
Material TITANIUM
Application Hydraulic Pipe, Gas Pipe, Structure Pipe, Chemical Fertilizer Pipe
Elbow Bend Angle 90 Degree, 180 Degree, 45 Degree
I Deal In New Only
Metal Aids India, are one of the leading manufactures & suppliers of Titanium Forged Elbow.
Grade:-
Titanium Gr 1, Gr 2, Gr 3, Gr 4, Gr 5.
Dimensions
ANSI/ASME B16.11 & BS3799, etc.
Class:-
2000LBS, 3000LBS, 6000LBS, 9000LBS, etc.
Type:-
Socket Weld (S/W) & SCREWED (SCRD) â?? NPT, BSP, BSPT
Types of Titanium Forged Fittings : â?º Forged Threaded Elbow
â?º Forged Threaded Equal & Unequal Tee
