Please click here to check who's online and chat with them.

Supplier Ceramic Lined Pipe Elbow

Supplier From China
Jun-29-16

Physiologically harmless, suitable for food products
Smooth surface to achieve good flowability and to avoid plugs
No spilled material to clean up
2: ceramic tube pipe introduction :

Chemshun alumina ceramic lined composite steel pipe not only has steel pipe characters of
High-strength, good toughness, impact resistance, good weld-ability, but also has corundum
Ceramics characters of high hardness, high wear resistance, corrosion resistance, heat
Resistance. Which overcome disadvantages of steel low hardness, poor wear resistance
And ceramics poor toughness, therefore, ceramic lined pipes have comprehensive property
Of excellent wear resistance , hear resistance , corrosion resistance , mechanical shock and
Thermal shock etc , it is the ideal pipeline of conveying sand , stone , coal , ash, molten
Aluminum etc particles and corrosive medium, chemshun ceramics offers sophisticated
Design and engineering capabilities of both standard and custom wear linings, installation
And project management, as well as abra sion a udits of used wear linings.

3:technical data :
1) chemical data :
Al2o3 sio2 cao mgo na2o
92~93% 3~6% 1~1.6% 0.2~0.8% 0.1%
2) physical data :
Specific gravity (g/cc) >3.60
Apparent porosity (%) 0
Flexural strength (20 c, mpa) 280
Compressive strength (20 c, mpa) 850
Rockwell hardness (hra) 80
Vickers hardness (hv) 1050
Moh's hardness (scale) =9
Thermal expansion (20-800 c, x10-6/ c) 8
Crystal size (m) 1.3-3.0

Price and Minimum Quantity

Price: $1250
MOQ: Not Specified

Recent User Reviews

This user has not received any reviews yet!

Verification Status


 
 
Contact Supplier
Renew

More Items Similiar to: Supplier Ceramic Lined Pipe Elbow

Sep-02-19
 
Product Description



The durability of Abrasion Resistant Ceramic Lined Pipe and Elbow directly affects the safe running of fluid transmit system!



We successfully combined the ceramic with the steel matrix directly, and firstly developed mass production.



This technique created a brand-new ceramic-metal bonding way to overcome the problem that the ceramic is lack of impact resistance and thermal stability, and easy to pull off.



After times of trials, we insist on choosing 95% Alumina Ceramics with high quality to ensure your best experience.



Our new Abrasion Resistant Ceramic Lined Pipe and Elbow have been in service for metallurgy, cement, mining, chemical, thermal power plants for years. Compared to seamless steel pipes and elbow, the uptimes of our tubes used to be prolonged by 10 times.



It is the ideal product instead of steel or rubber lined pipe and elbow.



Advantages:



1. Good abrasion resistance



The liner is High quality wear ceramic with 95% Al2O3 which are sintered under 1700 and the hardness are up to 85HRA which is 271.5 times of manganese steel or 1700 times of chrome steel plate. Special composite method and toughening formula ensure the ceramic not being too fragile to resist the impact of normal blocks.



2. Little loss during running



3. Low project cost



Light weight and longer lifetime to save the cost of support structure and handling charges. The charges is similar to basalt piping project, or 20-30% less than wear steel piping project.



4. Good thermal stability



-50 ~600 degree C is the ideal temperature.



5. Easy and fast to fix on site



Welding, flange, flexible joint are available.
Sep-02-19
 
Product Description



The durability of Abrasion Resistant Ceramic Lined Pipe and Elbow directly affects the safe running of fluid transmit system!



We successfully combined the ceramic with the steel matrix directly, and firstly developed mass production.



This technique created a brand-new ceramic-metal bonding way to overcome the problem that the ceramic is lack of impact resistance and thermal stability, and easy to pull off.



After times of trials, we insist on choosing 95% Alumina Ceramics with high quality to ensure your best experience.



Our new Abrasion Resistant Ceramic Lined Pipe and Elbow have been in service for metallurgy, cement, mining, chemical, thermal power plants for years. Compared to seamless steel pipes and elbow, the uptimes of our tubes used to be prolonged by 10 times.



It is the ideal product instead of steel or rubber lined pipe and elbow.



Advantages:



1. Good abrasion resistance



The liner is High quality wear ceramic with 95% Al2O3 which are sintered under 1700 and the hardness are up to 85HRA which is 271.5 times of manganese steel or 1700 times of chrome steel plate. Special composite method and toughening formula ensure the ceramic not being too fragile to resist the impact of normal blocks.



2. Little loss during running



3. Low project cost



Light weight and longer lifetime to save the cost of support structure and handling charges. The charges is similar to basalt piping project, or 20-30% less than wear steel piping project.



4. Good thermal stability



-50 ~600 degree C is the ideal temperature.



5. Easy and fast to fix on site



Welding, flange, flexible joint are available.
Sep-02-19
 
Product Description:

The durability of Abrasion Resistant Ceramic Lined Pipe and Elbow directly affects the safe running of fluid transmit system!



We successfully combined the ceramic with the steel matrix directly, and firstly developed mass production.



This technique created a brand-new ceramic-metal bonding way to overcome the problem that the ceramic is lack of impact resistance and thermal stability, and easy to pull off.



After times of trials, we insist on choosing 95% Alumina Ceramics with high quality to ensure your best experience.



Our new Abrasion Resistant Ceramic Lined Pipe and Elbow have been in service for metallurgy, cement, mining, chemical, thermal power plants for years. Compared to seamless steel pipes and elbow, the uptimes of our tubes used to be prolonged by 10 times.



It is the ideal product instead of steel or rubber lined pipe and elbow.



Advantages:



1. Good abrasion resistance



The liner is High quality wear ceramic with 95% Al2O3 which are sintered under 1700 and the hardness are up to 85HRA which is 271.5 times of manganese steel or 1700 times of chrome steel plate. Special composite method and toughening formula ensure the ceramic not being too fragile to resist the impact of normal blocks.



2. Little loss during running



3. Low project cost



Light weight and longer lifetime to save the cost of support structure and handling charges. The charges is similar to basalt piping project, or 20-30% less than wear steel piping project.



4. Good thermal stability



-50 ~600 degree C is the ideal temperature.



5. Easy and fast to fix on site



Welding, flange, flexible joint are available.
GOLD Member
VERIFIED
Jan-05-21

Brass Knob

MOQ: 500  Pieces
Sample Available
Supplier From Jamnagar, Gujarat, India
 
We are leading manufacturer & exporter of Brass Knob.
GOLD Member
Aug-21-17
Supplier From Dubai, United Arab Emirates
Sep-02-19
 
Product Description



The durability of Abrasion Resistant Ceramic Lined Pipe and Elbow directly affects the safe running of fluid transmit system!



We successfully combined the ceramic with the steel matrix directly, and firstly developed mass production.



This technique created a brand-new ceramic-metal bonding way to overcome the problem that the ceramic is lack of impact resistance and thermal stability, and easy to pull off.



After times of trials, we insist on choosing 95% Alumina Ceramics with high quality to ensure your best experience.



Our new Abrasion Resistant Ceramic Lined Pipe and Elbow have been in service for metallurgy, cement, mining, chemical, thermal power plants for years. Compared to seamless steel pipes and elbow, the uptimes of our tubes used to be prolonged by 10 times.



It is the ideal product instead of steel or rubber lined pipe and elbow.



Advantages:



1. Good abrasion resistance



The liner is High quality wear ceramic with 95% Al2O3 which are sintered under 1700 and the hardness are up to 85HRA which is 271.5 times of manganese steel or 1700 times of chrome steel plate. Special composite method and toughening formula ensure the ceramic not being too fragile to resist the impact of normal blocks.



2. Little loss during running



3. Low project cost



Light weight and longer lifetime to save the cost of support structure and handling charges. The charges is similar to basalt piping project, or 20-30% less than wear steel piping project.



4. Good thermal stability



-50 ~600 degree C is the ideal temperature.



5. Easy and fast to fix on site



Welding, flange, flexible joint are available.
Sep-02-19
 
Product Description



The durability of Abrasion Resistant Ceramic Lined Pipe and Elbow directly affects the safe running of fluid transmit system!



We successfully combined the ceramic with the steel matrix directly, and firstly developed mass production.



This technique created a brand-new ceramic-metal bonding way to overcome the problem that the ceramic is lack of impact resistance and thermal stability, and easy to pull off.



After times of trials, we insist on choosing 95% Alumina Ceramics with high quality to ensure your best experience.



Our new Abrasion Resistant Ceramic Lined Pipe and Elbow have been in service for metallurgy, cement, mining, chemical, thermal power plants for years. Compared to seamless steel pipes and elbow, the uptimes of our tubes used to be prolonged by 10 times.



It is the ideal product instead of steel or rubber lined pipe and elbow.



Advantages:



1. Good abrasion resistance



The liner is High quality wear ceramic with 95% Al2O3 which are sintered under 1700 and the hardness are up to 85HRA which is 271.5 times of manganese steel or 1700 times of chrome steel plate. Special composite method and toughening formula ensure the ceramic not being too fragile to resist the impact of normal blocks.



2. Little loss during running



3. Low project cost



Light weight and longer lifetime to save the cost of support structure and handling charges. The charges is similar to basalt piping project, or 20-30% less than wear steel piping project.



4. Good thermal stability



-50 ~600 degree C is the ideal temperature.



5. Easy and fast to fix on site



Welding, flange, flexible joint are available
GOLD Member
VERIFIED
Mar-27-18
Supplier From Morbi, Gujarat, India
GOLD Member
Jun-15-22
Supplier From Hangzhou, Zhejiang, China

Verification Status