Special SBR styrene butadiene rubber asphalt modifier for waterproofing
New product introduction
In order to pushing the industry development, improving product quality, meeting with the demand of customers. HaiFang Rubber Technology developed XYF - ( item no. 095) styrene-butadiene rubber modifier in 2019.
It grafted based on the latex and in particles form. In order to guarantee the high content at the same time, compared with normal SBR products, it can be dissolved without using colloid mill and the dissolution time is shorter. As a new kind of environmental protection material. Its main advantages: Lower melting temperature, reducing production cost, greatly reducing the dust while feeding compared with normal SBR powder.
Product features
095 Waterproof SBR styrene butadiene rubber asphalt modifier is made by a certain amount of styrene in SBR styrene butadiene latex, initiated and catalyzed reaction, the formation of SBR rubber latex with a certain degree of interposition thermoplastic. The experimental results show that the high temperature properties, tensile properties, tensile strength, bonding strength and anti-aging properties of the materials can be improved obviously by adding it.
To meet different customers requirements, 095 modifier was upgraded to two different kinds of products: High and low-temperature property.
High temperature performance: Cohesion strength is higher than that of ordinary SBR modifier with strong peeling strength, the softening point is 4-6 higher than ordinary SBR modifier. Recommended for using in non- curing products.
Low temperature performance: It is better than the ordinary SBR modifier, low temperature index is 4 lower than the normal SBR modifier, and it has a better viscosity. Recommended using in type adhesive material.
Experimental test indicator
SBR modifier shape Normal SBR modifier High temperature 095 Low temperature 095
Softening point 88 95 90
-20 Continuous Continuous Continuous
Ultimate temperature -26 -26 -32
75 Not flowing Not flowing Not flowing
Peel strength (bonding with aluminum sheet) 1.82 2.78 2.08
Peel strength (bonding with water proofing material) 1.25 1.87 1.51
Bonding effect with aluminum sheet
Remains on the aluminum sheet
Viscosity lasting >2h >2h >2h
Quality Index
Effective constituent % Fitness 16 meshes % Molecular
weight Ten thousand Binding styrene% Moisture % Mooney viscosity
95 95 22-23 22-27 2.0 75
Method of use
A certain proportion of styrene butadiene rubber powder should be mixed slowly into the emulsified bitumen at 140 C-150 C. Then raising the temperature to 185 C-195 C for stirring, until the styrene butadiene rubber powder is fully mixed evenly and swollen while stirring about one and a half hour and with no distinct particles.
item
value
Classification
Sulphate
Type - Magnesium Sulphate
CAS No. - 7H2O
Place of Origin - Thailand, Shandong
Grade Standard - Agriculture Grade, Industrial Grade
Purity - 99.60%
Related products
Nbr Latex- Supply NBR Latex- Water Base Nitrile Butadiene Rubber
Styrene Butadiene Rubber, Payment Terms : T/T, Bank or Wire Transfer Upfront Upon Proforma Invoice
Pricing, Total or Minimum order Quantity , Quality and Delivery time get back to us so we can provide all those for you if interested.
Regular others also have added advantages, Bulk orders as well. Styrene Butadiene Rubber,...
Styrene Butadiene Rubber, Payment Terms : T/T, Bank or Wire Transfer, PayPal, Western- Union, Ria-Transfer Total or Minimum order Quantity ?, For Delivery time get back to us so we can provide all those for you if interested. Regular others also have added advantages, Bulk orders as well
Material Properties
Styrene butadiene Rubber latex is a kind of high-polymer dispersion emulsion polymerized by butadiene, and styrene, etc. through advanced techniques. As a white thick emulsion in appearance, it has good viscosity. It is one of the popular raw materials in tyre-dipping fabric industry, because of its good intermiscibility with VP latex for fabric dipping.
Application
It is suitable for the dipping of tyre cord fabric, and industrial fabric etc..
Storage&Package
1.Avoid from rain, snow or strong sunlight. Temperature: 1~40°C.
2.200L Drum, 1000L IBC.
3.Keep in dry, cool, non-aggressive gas warehouse, and avoid strong sunlight, remote from fire and thermal resource at 1~40°C, 6 months shelf life, a little decrease of PH value.
Commodity:Sodium persulfate
Molecular Formula : Na2S2O8
Molecular weight : 238.13
Description
Sodium persulfate is a white,crystalline,odourless salt.It is used as initiator for the Polymerization of monomers and as a strong oxidizing agent in many applications.It has the particular advantage of being almost non - hygroscopic,of having a particularly good storage stability as a result of its extremely high purity and of being easy and safe to handle.
Transportation
Road/Rail transport : GGVS,GGVE,ADR,RID/CLASS 5.1 Sea transport : GGV Sea/IMDG code : CLASS 5.1 Page 5185,UN no.1505
Water hazards class 1(slight water hazard)
All information is given in good faith,but without warranty,since the conditions of use are outside our control. Verification by the user is recommended.Freedom from patent restriction cannot be assumed.
Package
(1) In 25kgs net multiple paper bags with one PE bag inner
(2) In 25kgs net PE bags
(3) In 25kgs net woven bags with two PE bags inner
(4) In 1000kgs net big woven bags with one PE bag inner
The above package is also with a pallet 1000kgs each.
Storage
NPS(SPS) is not combustible but assists combustion materials due to release of oxygen.Provided it is stored under appropriate condition.It must be stored dry in closed containers and protected from direct sunlight,heat and humidity.Impurities such as dirt,rust or traces of metal and reductants may cause catalytic decomposition.The product as supplied or in solution needs to be handled with appropriate care.The eye,skin and clothes must be protected when working with NPS(SPS) as damp powder or aqueous solution has a bleaching and slightly corroding effect.
Application
Polymerization : Initiator for the emulsion or solution Polymerization of acrylic monomers,vinyl acetate,vinyl chloride etc.and for the emulsion co-polymerization of styrene,acrylonitrile,butadiene etc.
Metal treatment : Treatment of metal surfaces(e.g. in the manufacture of semiconductors;
cleaning and etching of printed circuits),activation of copper and aluminium surfaces.
Cosmetics : Essential component of bleaching formulations.
Paper : modification of starch,repulping of wet - strength paper.
Textile : Desizing agent and bleach activator - particularly for cold bleaching.(i.e.bleaching of Jeans).
Others :
- Chemical synthesis
- Water treatment(decontamination)
- Waste gas treatment,oxidative degradation of harmful substances(e.g.Hg)
- Disinfectant
ITEMS SPECIFICATIONS
Appearance white crystalline salt
Assay 99.0% w/w min
Active oxygen 6.65% w/w min
Chloride and chlorate(as CL) 0.005% w/w max
Ammonia (NH4) 0.05% w/w max
Manganese(Mn) 0.0001% w/w max
Iron(Fe) 0.001% w/w max
Heavy metals(as Pb) 0.001% w/w max
Moisture 0.05% w/w max
Decomposition of the product as supplied at above 65C
Recommended storage temperature Normal Temperature
Storage stability as from date of delivery 12 months
Solution Styrene Butadiene Rubber (SSBR)
SSBR is one of the most manufactured synthetic rubber in the world. For use in high-performance tires, S-SBR products provide an excellent balance between wet grip, low rolling resistance, and abrasion resistance in silica and carbon black compounds. SSBR is the first choice for the production of tire compounds, particularly for summer and winter tire treads.
Solution Styrene Butadinene Rubber is sometimes blended with NR, BR or ESBR to improve the properties of the final product. The materials are also used for the manufacture of high-quality industrial rubber goods. Oil Extended and Non-Oil types of SSBR in the shapes of Prime, Near to Prime and Off Grades can be supplied.
ESBR is the most manufactured synthetic rubber in the world. It's shape is irregular because of the fact that there is no crystallization. Emulsion Styrene Butadiene Rubber is the most widely used rubber in the world, representing about % 40 of the synthetic rubber market which is a result of its excellent balance of properties and cost performance.
ESBR has good mechanical properties, abrasion and tear resistance, being largely used in tire, retread, footwear soles, hoses, tubes, cables, conveyor belts and a great variety of moulded, calendered and extruded rubber goods.
Oil Extended and Non Oil types of ESBR in the shapes of Prime, Near to Prime and Off Grades can be supplied. Near to Prime and Off Grade materials have more different properties than thier prime grade's about usually mooney viscosity but the materials have special techinical data sheets. The material's preferability reason is cheaper than their prime grade's.
ABS plastic is a ternary copolymer of three monomers: acrylonitrile (A), butadiene (B), and styrene (S). The relative content of these three monomers can be changed arbitrarily to produce various resins.
ABS plastic has the common properties of three components: A makes it resistant to chemical corrosion, heat, and has a certain surface hardness, B makes it highly elastic and tough, and S makes it have the processing and forming characteristics of thermoplastic plastics and improves electrical properties. Therefore, ABS plastic is a "tough, hard, and rigid" material that is easy to obtain, has good comprehensive performance, is cheap, and has a wide range of uses.
Product Name Acrylonitrile Butadiene Styrene plastic
Chemical name Acrylonitrile butadiene styrene plastic
Applicable scope Machinery, automobiles, electronics, etc
Product features Impact resistance, heat resistance, low temperature resistance, etc
CASL ogin number 9003-56-9
EINECSLogin number 618-371-8
Monomer Acrylonitrile; Butadiene; styrene
Product application:
ABS plastic has been widely used in manufacturing industries such as machinery, electrical, textiles, automobiles, airplanes, ships, and chemical industries.
Powdered styrene-butadiene rubber (SBR) is widely used as polymer modified material in road asphalt modification, asphalt ductilizer, high viscosity asphalt, hydraulic asphalt and waterproof membrane. The modified styrene-butadiene rubber powder has more special functions, besides excellent low temperature performance, it also has excellent high temperature performance and elastic recovery ability.
Appearance White powder
Particle size (mesh) 40
Moisture content (%) 3
Molecular content (%) 200 thousand-300 thousand
Bound styrene (%) 22.5-24.5
Mooney Viscosity (ML+4) 38-68
300% Elongation (Mpa) 10-15
Tensile strength (Mpa) 21
Elongation at break (%) 320
Origin: Korea
Material: ABS DP Powder Ivory with moisture 15%
Category: ABS DP
Type: Powder
Color: Ivory with moisture 15%
Quantity: 200 Tons
Loading weight: 25 Tons
Specification: "ABS DP moisture arround 15% Coming from BASF and KUMHO
There are possibility to mix 1-2% Dead material.
ABS is Acrylonitile Butadiene Styrene abbreviation. When these three chemical component (Acrylonitile- AN , Butadiene, Styrene--SM) shall be polymerization by heat and Catalyst. Among three component, Styrene shall be turned dead material by not- perfect polymerization. In other word, Dead material is Styrene.)
It is easily separated by mesh filter.
Regular supply.
Subject to unsold"
Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?
1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?
