Vid78 multi-polar stepper motor series designed based on vid new design electromagnetic micro-motor system.(us patent 20080018208. Chinese patent zl2006 20130640.5 and international patent is under application).Characterized in extremely low noise, high torque and high precision are leading by advanced technology for new generation cluster step motor.
With OSM's huge assortment of High-Torque Stepper Motors, a customer can select the most cost-effective solution, never sacrificing quality or system performance. The stepper motors product line ranges from the smallest Nema 8 stepper motors with 2.5 oz. inches of torque, to the largest Nema 42 stepper motors with up to 5,700 oz. inches of torque! A high-Torque Stepper Motors has a 1.8-degree step angle as standard, yet other step angles are available. Four, six and eight-lead configurations are standard for OSM's stepper motor product line, and are model dependent. Other options available are conduit boxes, special stepper motors windings, shaft modifications, as well as cable, connector, encoder, brake, and gearbox adders.
1.Inherently a digital device, number of pulses determine distance, frequency sets the speed.
2.Drift free.
3.The step angle error is very small and non-cumulative.
4.Rapid response to starting, stopping, and reversing.
5.Brushless design for reliability, simplicity.
6.High torque per package size.
7.Stable at zero speed.
8.Holding torque at standstill.
9.Can be stalled repeatedly and indefinitely without damage.
10.No extra feedback components required (encoders can be added for additional advantages).
11.Bidirectional operation.
Vid23 is a precise stepping motor of patent design. It is specially designed with transparent pointer shaft, pointer lumination intensity is superior to tranditional way. It also bring cost reduction in saving number of leds.
Vid23 with a gear reduction ratio of 1/180. Its mainly used in dashboard instrumentation or other digital indicator equipments, to transfer digital signals directly and accurately to analog display output.
Vid23 is driven by 2 sequent logic pulse signals. It can be driven in 5v ~ 10v providing shaft stepping angle resolution 1/12. The pointer can move with a speed more than 400hz.
The d2hb882mb is an economical microstepping driver based on patented technology of longs motor.It is suitable for driving 2-phase 4-phase hybrid stepping motors .By using the advanced bipolar constant-current shopping technique , it can output more speed and torque from the same motor, compared with traditional drivers , such as l/r drivers .Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple, therefore less motor heating is achieved.
Features
Low cost and good high-speed torque
14 selectable resolutions
Supply voltage up to +80vdc
Suitable for-2-phase and 4-phase motors
Output current up to 5.86a
Dip switch current setting 8different values
Optically isolated input signals
Pulse frequency up to 200khz
Automatic idle-current reduction
Small size (107*97*48), weight:1kg
The d2hb542ma is an economical microstepping driver based on patented technology of longs motor.It is suitable for driving 2-phase 4-phase hybrid stepping motors .By using the advanced bipolar constant-current shopping technique , it can output more speed and torque from the same motor, compared with traditional drivers , such as l/r drivers .Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple, therefore less motor heating is achieved.
Features
Low cost and good high-speed torque
Supply voltage up to +45vdc
Output current up to 5.86a
Optically isolated input signals
Automatic idle-current reduction
14 selectable resolutions
Suitable for-2-phase and 4-phase motors
Dip switch current setting 8 different values
Pulse frequency up to 200khz
Dip switch current setting 8 different values
Small size (122.2*90*33), weight:0.3kg
SD-2H086MB
Features
Low cost and good high-speed torque
14 selectable resolutions
Supply voltage up to +80VDC
Suitable for-2-phase and 4-phase motors
Output current up to 5.86A
Dip switch current setting 8different values
Optically isolated input signals
Pulse frequency up to 200KHz
Automatic idle-current reduction
Small size (107*97*48),Weight:1KG
SD-2H044MA
Features
Low cost and good high-speed torque
Supply voltage up to +45VDC
Output current up to 5.86A
Optically isolated input signals
Automatic idle-current reduction
14 selectable resolutions
Suitable for-2-phase and 4-phase motors
Dip switch current setting 8 different values
Pulse frequency up to 200KHz
Dip switch current setting 8 different values
Small size (122.2*90*33),Weight:0.3KG
Q2HB88M
Features
(1) High performance, low price
(2) Two group 32 channels constant angel and constant torque subdivision. Highest subdivision: 480
(3) The motor phase current is reduced to set current value 100 ms after receiving the last pulse edge
(4) Bipolar constant current chopping circuit
(5) Opto-isolated input/output
(6) Driven current is adjustable continuously from 0.5A/phase to 8A/phase (0.4A/phase to 6.4A/phase)
(7) Single power supply, voltage arrange from DC24/V to 80V (DC40V to130V)
(8) Highest response frequency: 200Kpps
(9) Over voltage protection, overheat protection, over current protection
Stepper motor drive
-Bipolar Motor Drive
-Microprocessor based Design
-Operating Voltage up to 80V DC
-Programmable Motor current up to 8A
-Up to 64 Microsteps - Selectable through DIP Switch
-Microstepping for Smooth Operation
Byj series stepper motor
Model 35BYJ46
Rated voltage 12VDC
Number of Pole 4
Speed Variation Ratio 1/85.25
Stride Angle 7.5fp /85.25
DC resistance 130ohmf+7%(25k)
Idle In-traction Frequency >500Hz
Idle Out-traction Frequency >800Hz
In-traction Torque >78.4mN.m(120Hz)
Self-positioning Tor >39.2mN.m
insulated resistance >10ohm(500V)
insulated electricity power 600VAC/1mA/1s
Insulation grade A
Rise in Temperature <40K(120Hz)
Noise <40dB(A)
Weight about 60g
BYJ stepping motor mainly used in wind guiding board of fission air conditioner in house,wind heat fire placesing board etc.,
Note:
1,Colour&length of conducting ire can be made according to the requirement of users.
2,The output shaft can be made according to the consumers need.
3,Working voltages and frequencies can be made as per users' requirements.
4,Installation dimension can be made according to user's requirements
PMD006P3E is a kind of micro integrated stepper motor microstepping driver, which can be directly installed in the rear 42/57/86 etc series stepper motor, and which has the advantages of small size, strong driving force, and low heat and so on. PMD006P3E stepping motor driver can provide 0~6 continuous adjustable peak current, maximum 128 microstepping, free current which can be adjusted continuously.
Part No. 20BYGH408Single Shaft
Frame Size: Â NEMA8
Step Angle: Â 1.8 degree
Voltage: Â 4.32VDC
Current: 0.8A/phase
Resistance: 5.4Ohm/phase
Inductance: Â 1.5mH/phase
Holding torque: Â 30Kg-cm
Rotor inertia: 3.6 Â g-cm2
Detent torque: 5� kg-cm
Number of wire leads: Â 4
Weight: Â 0.2KG
Length:40mm
Front  shaft diameter: 4mm
Front shaft length: 20mm round shaft
This model is for Single shaft, with 4mm motor shaft, 20mm front shaft length, round shaft!
More Order Quantites, more  discount!
31275 Stepper Motor Suppliers
Short on time? Let Stepper Motor sellers contact you.
